It looks like I should flash without autobackup if I want to perform a successful online update?
And then I should not have a Satdreamgr in another slot?
I wonder if there is a way to repair it without flashing?
Mut@nt HD51 Network and software update
Started by machare, 10 Nov 2018 18:13
25 replies to this topic
Re: Mut@nt HD51 Network and software update #21
-
- Senior Member
- 2,616 posts
+30
Good
Posted 17 December 2018 - 11:28
ET9000, OpenPLi 4.0, 13E, 19E
HD51, OpenPLi 6.2, 75E - 30W
Re: Mut@nt HD51 Network and software update #22
-
- Senior Member
- 444 posts
+15
Neutral
Posted 17 December 2018 - 12:24
The issue is not with the slots ...multiboot images do not impact each other.
But if for example they are OpenPli based images (real or clones) and use the same backup settings application then you can have issues.... with some images you can change the name of the settings backup(menu option), which helps to isolate the images.
But if for example they are OpenPli based images (real or clones) and use the same backup settings application then you can have issues.... with some images you can change the name of the settings backup(menu option), which helps to isolate the images.
Gigablue Quad 4K & UE 4K
.........FBC Tuners:
------------------> DUR-Line DCR 5-1-8-L4 Multiswitch to 1.5M dish(28.2E)
------------------> Spaun SUS 5581/33 NFA Multiswitch to 80 cm dish(19.2E)
.........DVB-S2X into 90cm dish (27.5W)
Octagon sf8008, AX HD61, Edision Osmio 4K+, Zgemma H9Combo using Legacy ports on multiswitches
Zgemma H9twin & Zgemma H9 C/S mode into Giga4K
Re: Mut@nt HD51 Network and software update #23
-
- Senior Member
- 2,616 posts
+30
Good
Posted 17 December 2018 - 12:44
OK, I understand the conflict is on my HDD where backup files are located.
Now it is probably too late to repair it because the issue has already surfaced and seems it prevents successful update.
ET9000, OpenPLi 4.0, 13E, 19E
HD51, OpenPLi 6.2, 75E - 30W
Re: Mut@nt HD51 Network and software update #24
-
- Senior Member
- 444 posts
+15
Neutral
Posted 17 December 2018 - 13:57
OK, I understand the conflict is on my HDD where backup files are located.
Now it is probably too late to repair it because the issue has already surfaced and seems it prevents successful update.
I am guessing but should be fixable by an OpenPli expert - its certainly a better position than someone recently who used another receivers settings backup on a multiboot receiver - and even they managed (apparently) to recover, although not a recommended procedure!
Gigablue Quad 4K & UE 4K
.........FBC Tuners:
------------------> DUR-Line DCR 5-1-8-L4 Multiswitch to 1.5M dish(28.2E)
------------------> Spaun SUS 5581/33 NFA Multiswitch to 80 cm dish(19.2E)
.........DVB-S2X into 90cm dish (27.5W)
Octagon sf8008, AX HD61, Edision Osmio 4K+, Zgemma H9Combo using Legacy ports on multiswitches
Zgemma H9twin & Zgemma H9 C/S mode into Giga4K
Re: Mut@nt HD51 Network and software update #25
-
- PLi® Core member
- 68,559 posts
+1,737
Excellent
Posted 17 December 2018 - 14:15
There is no way to determine the source of a backup.
If you have a multiboot system with different images, you have to make sure you keep the backups apart (chances are all 4 images backup in the same location, creating a right mess) and restore the correct backup (by doing it manually after a flash).
Currently in use: VU+ Duo 4K (2xFBC S2), VU+ Solo 4K (1xFBC S2), uClan Usytm 4K Pro (S2+T2), Octagon SF8008 (S2+T2), Zgemma H9.2H (S2+T2)
Due to my bad health, I will not be very active at times and may be slow to respond. I will not read the forum or PM on a regular basis.
Many answers to your question can be found in our new and improved wiki.
Re: Mut@nt HD51 Network and software update #26
-
- Senior Member
- 2,616 posts
+30
Good
Posted 18 December 2018 - 14:39
Ok, I will have more time during Christmas so I will probably clear all slots in HD51 by flashing OpenPLi. After that I will flash SatdreamGr (based on OpenPLi) in one of the other slots.
Now, what should I do before flashing SatdreamGr so that the backups on HDD do not get mixed?
Thanks.
ET9000, OpenPLi 4.0, 13E, 19E
HD51, OpenPLi 6.2, 75E - 30W
1 user(s) are reading this topic
0 members, 1 guests, 0 anonymous users
