502 replies to this topic

[darkman13]

Thanks

[majidnourollahi]

can someone please test to install this skin on pli 7.0??

i tried but could not install

 

https://www.dreamosa...renalinnrw-mod/

[Kos1]

My attempts  to install Openpli 7.0  on multiboot (zgemma h2s) are not succesfull.

I tried to install "Openpli 7.0 .. mutiboot" version ... even.

Flash instalation OK. 

[Kos1]

One more question:

Could You tell me what mean "support for Gamma Curve" ? (a new in OpenPli 7.0)

Is it for better quality picture ?

[darkman13]

OpenPLi Enigma2 crash log

crashdate=Tue Jan 22 16:08:57 2019
compiledate=Jan 21 2019
skin=PLi-FullNightHD/skin.xml
sourcedate=2019-01-18
branch=release-7.0
rev=9a763d6
component=Enigma2

stbmodel=hd51
stbmodel=hd51
kernelcmdline=root=/dev/mmcblk0p3 rw rootwait hd51_4.boxmode=1 brcm_cma=440M@328M brcm_cma=192M@768M console=ttyS0,115200
nimsockets=NIM Socket 0:
imageissue=openpli 7.0-release %h

REMOVE Peer hd51
REMOVE Peer hd51
Traceback (most recent call last):
  File "/usr/lib/enigma2/python/Components/ActionMap.py", line 69, in action
  File "/usr/lib/enigma2/python/Components/ActionMap.py", line 49, in action
  File "/usr/lib/enigma2/python/Screens/Menu.py", line 57, in okbuttonClick
  File "/usr/lib/enigma2/python/Tools/BoundFunction.py", line 9, in __call__
  File "/usr/lib/enigma2/python/Screens/Menu.py", line 72, in runScreen
  File "/usr/lib/enigma2/python/Screens/Menu.py", line 78, in openDialog
  File "/usr/lib/enigma2/python/mytest.py", line 289, in openWithCallback
    dlg = self.open(screen, *arguments, **kwargs)
  File "/usr/lib/enigma2/python/mytest.py", line 299, in open
    dlg = self.current_dialog = self.instantiateDialog(screen, *arguments, **kwargs)
  File "/usr/lib/enigma2/python/mytest.py", line 242, in instantiateDialog
    return self.doInstantiateDialog(screen, arguments, kwargs, self.desktop)
  File "/usr/lib/enigma2/python/mytest.py", line 259, in doInstantiateDialog
    dlg = screen(self, *arguments, **kwargs)
  File "/usr/lib/enigma2/python/Screens/ScanSetup.py", line 1718, in __init__
  File "/usr/lib/enigma2/python/Screens/ScanSetup.py", line 1678, in getNetworksForNim
  File "/usr/lib/enigma2/python/Components/NimManager.py", line 712, in getTerrestrialDescription
IndexError: list index out of range

 

 

dmesg

 

<6>[    0.000000] Booting Linux on physical CPU 0x0
<5>[    0.000000] Linux version 4.10.12 (oe-user@oe-host) (gcc version 6.3.0 (GCC) ) #1 SMP Thu Jan 10 22:55:05 CET 2019
<6>[    0.000000] CPU: ARMv7 Processor [420f00f3] revision 3 (ARMv7), cr=30c5387d
<6>[    0.000000] CPU: div instructions available: patching division code
<6>[    0.000000] CPU: PIPT / VIPT nonaliasing data cache, PIPT instruction cache
<6>[    0.000000] OF: fdt:Machine model: BCM97251SSV
<6>[    0.000000] cma: Reserved 440 MiB at 0x0000000014800000
<6>[    0.000000] cma: Reserved 192 MiB at 0x0000000030000000
<6>[    0.000000] Memory policy: Data cache writealloc
<7>[    0.000000] On node 0 totalpages: 262144
<7>[    0.000000] free_area_init_node: node 0, pgdat c0915d80, node_mem_map d3e1c000
<7>[    0.000000]   Normal zone: 1728 pages used for memmap
<7>[    0.000000]   Normal zone: 0 pages reserved
<7>[    0.000000]   Normal zone: 196608 pages, LIFO batch:31
<7>[    0.000000]   HighMem zone: 65536 pages, LIFO batch:15
<6>[    0.000000] percpu: Embedded 14 pages/cpu @d3ddd000 s26764 r8192 d22388 u57344
<7>[    0.000000] pcpu-alloc: s26764 r8192 d22388 u57344 alloc=14*4096
<7>[    0.000000] pcpu-alloc: [0] 0 [0] 1
<6>[    0.000000] Built 1 zonelists in Zone order, mobility grouping on.  Total pages: 260416
<5>[    0.000000] Kernel command line: root=/dev/mmcblk0p3 rw rootwait hd51_4.boxmode=1 brcm_cma=440M@328M brcm_cma=192M@768M console=ttyS0,115200
<6>[    0.000000] PID hash table entries: 4096 (order: 2, 16384 bytes)
<6>[    0.000000] Dentry cache hash table entries: 131072 (order: 7, 524288 bytes)
<6>[    0.000000] Inode-cache hash table entries: 65536 (order: 6, 262144 bytes)
<6>[    0.000000] Memory: 380608K/1048576K available (6629K kernel code, 361K rwdata, 1816K rodata, 344K init, 223K bss, 20800K reserved, 647168K cma-reserved, 65536K highmem)
<5>[    0.000000] Virtual kernel memory layout:
<5>[    0.000000]     vector  : 0xffff0000 - 0xffff1000   (   4 kB)
<5>[    0.000000]     fixmap  : 0xffc00000 - 0xfff00000   (3072 kB)
<5>[    0.000000]     vmalloc : 0xf0800000 - 0xff800000   ( 240 MB)
<5>[    0.000000]     lowmem  : 0xc0000000 - 0xf0000000   ( 768 MB)
<5>[    0.000000]     pkmap   : 0xbfe00000 - 0xc0000000   (   2 MB)
<5>[    0.000000]     modules : 0xbf000000 - 0xbfe00000   (  14 MB)
<5>[    0.000000]       .text : 0xc0008000 - 0xc06818d0   (6631 kB)
<5>[    0.000000]       .init : 0xc0876000 - 0xc08cc000   ( 344 kB)
<5>[    0.000000]       .data : 0xc08cc000 - 0xc0926578   ( 362 kB)
<5>[    0.000000]        .bss : 0xc0928000 - 0xc095fcb4   ( 224 kB)
<6>[    0.000000] Hierarchical RCU implementation.
<6>[    0.000000]  Build-time adjustment of leaf fanout to 32.
<6>[    0.000000]  RCU restricting CPUs from NR_CPUS=4 to nr_cpu_ids=2.
<6>[    0.000000] RCU: Adjusting geometry for rcu_fanout_leaf=32, nr_cpu_ids=2
<6>[    0.000000] NR_IRQS:16 nr_irqs:16 16
<6>[    0.000000] irq_brcmstb_l2: registered L2 intc (mem: 0xf0805000, parent irq: 16)
<6>[    0.000000] irq_brcmstb_l2: registered L2 intc (mem: 0xf0807000, parent irq: 17)
<6>[    0.000000] irq_brcmstb_l2: registered L2 intc (mem: 0xf0809640, parent irq: 18)
<6>[    0.000000] irq_brcmstb_l2: registered L2 intc (mem: 0xf080b200, parent irq: 19)
<6>[    0.000000] irq_bcm7120_l2: registered BCM7120 L2 intc (mem: 0xfc40a700, parent IRQ(s): 2)
<6>[    0.000000] irq_bcm7120_l2: registered BCM7120 L2 intc (mem: 0xf080d380, parent IRQ(s): 3)
<6>[    0.000000] brcmstb: biuctrl: MCP: Write pairing already disabled
<6>[    0.000000] arm_arch_timer: Architected cp15 timer(s) running at 27.00MHz (virt).
<6>[    0.000000] clocksource: arch_sys_counter: mask: 0xffffffffffffff max_cycles: 0x63a1e71a3, max_idle_ns: 440795203123 ns
<6>[    0.000004] sched_clock: 56 bits at 27MHz, resolution 37ns, wraps every 4398046511093ns
<6>[    0.000011] Switching to timer-based delay loop, resolution 37ns
<6>[    0.000292] Console: colour dummy device 80x30
<6>[    0.000312] Calibrating delay loop (skipped), value calculated using timer frequency.. 54.00 BogoMIPS (lpj=27000)
<6>[    0.000321] pid_max: default: 32768 minimum: 301
<6>[    0.000430] Mount-cache hash table entries: 2048 (order: 1, 8192 bytes)
<6>[    0.000437] Mountpoint-cache hash table entries: 2048 (order: 1, 8192 bytes)
<6>[    0.000893] CPU: Testing write buffer coherency: ok
<6>[    0.001143] CPU0: update cpu_capacity 1024
<6>[    0.001149] CPU0: thread -1, cpu 0, socket 0, mpidr 80000000
<6>[    0.001365] Setting up static identity map for 0x8440 - 0x8498
<6>[    0.003373] smp: Bringing up secondary CPUs ...
<6>[    0.004098] CPU1: update cpu_capacity 1024
<6>[    0.004101] CPU1: thread -1, cpu 1, socket 0, mpidr 80000001
<6>[    0.004163] smp: Brought up 1 node, 2 CPUs
<6>[    0.004173] SMP: Total of 2 processors activated (108.00 BogoMIPS).
<6>[    0.004179] CPU: All CPU(s) started in SVC mode.
<6>[    0.004580] devtmpfs: initialized
<6>[    0.010886] VFP support v0.3: implementor 42 architecture 4 part 00 variant 0 rev 0
<6>[    0.011083] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 1911260446275000 ns
<6>[    0.011130] futex hash table entries: 512 (order: 3, 32768 bytes)
<6>[    0.025451] NET: Registered protocol family 16
<6>[    0.025855] DMA: preallocated 256 KiB pool for atomic coherent allocations
<6>[    0.030418] cpuidle: using governor ladder
<6>[    0.034370] cpuidle: using governor menu
<6>[    0.043511] No ATAGs?
<6>[    0.043611] hw-breakpoint: found 5 (+1 reserved) breakpoint and 4 watchpoint registers.
<6>[    0.043622] hw-breakpoint: maximum watchpoint size is 8 bytes.
<5>[    0.058412] SCSI subsystem initialized
<7>[    0.058605] libata version 3.00 loaded.
<6>[    0.059006] usbcore: registered new interface driver usbfs
<6>[    0.059058] usbcore: registered new interface driver hub
<6>[    0.059105] usbcore: registered new device driver usb
<6>[    0.059173] Linux cec interface: v0.10
<6>[    0.059221] Linux video capture interface: v2.00
<6>[    0.059289] pps_core: LinuxPPS API ver. 1 registered
<6>[    0.059293] pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giometti <giometti@linux.it>
<6>[    0.059314] PTP clock support registered
<6>[    0.059843] Advanced Linux Sound Architecture Driver Initialized.
<6>[    0.061183] clocksource: Switched to clocksource arch_sys_counter
<5>[    0.061413] FS-Cache: Loaded
<6>[    0.067556] NET: Registered protocol family 2
<6>[    0.067917] TCP established hash table entries: 8192 (order: 3, 32768 bytes)
<6>[    0.067957] TCP bind hash table entries: 8192 (order: 4, 65536 bytes)
<6>[    0.068030] TCP: Hash tables configured (established 8192 bind 8192)
<6>[    0.068115] UDP hash table entries: 512 (order: 2, 16384 bytes)
<6>[    0.068141] UDP-Lite hash table entries: 512 (order: 2, 16384 bytes)
<6>[    0.068251] NET: Registered protocol family 1
<6>[    0.068735] RPC: Registered named UNIX socket transport module.
<6>[    0.068744] RPC: Registered udp transport module.
<6>[    0.068748] RPC: Registered tcp transport module.
<6>[    0.068753] RPC: Registered tcp NFSv4.1 backchannel transport module.
<7>[    0.068764] PCI: CLS 0 bytes, default 64
<6>[    0.069128] hw perfevents: enabled with armv7_cortex_a15 PMU driver, 7 counters available
<6>[    0.070425] workingset: timestamp_bits=14 max_order=18 bucket_order=4
<5>[    0.071103] NFS: Registering the id_resolver key type
<5>[    0.071124] Key type id_resolver registered
<5>[    0.071128] Key type id_legacy registered
<6>[    0.071138] nfs4filelayout_init: NFSv4 File Layout Driver Registering...
<6>[    0.071390] fuse init (API version 7.26)
<6>[    0.073327] bounce: pool size: 64 pages
<6>[    0.073372] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 251)
<6>[    0.073380] io scheduler noop registered
<6>[    0.073385] io scheduler deadline registered
<6>[    0.073416] io scheduler cfq registered (default)
<6>[    0.073734] brcm-gisb-arb f0400000.gisb-arb: registered mem: f0a09000, irqs: 47, 48
<6>[    0.074039] brcm-sata-phy f0458100.sata-phy: registered 1 port(s)
<6>[    0.074400] brcm-cma brcm-cma.0: Initialized Broadcom CMA root device
<6>[    0.075027] brcm-cma brcm-cma.0: Added CMA device @ PA=0x14800000 LEN=0x1b800000
<6>[    0.075570] brcm-cma brcm-cma.1: Added CMA device @ PA=0x30000000 LEN=0xc000000
<6>[    0.110143] Serial: 8250/16550 driver, 4 ports, IRQ sharing disabled
<6>[    0.111723] console [ttyS0] disabled
<6>[    0.111763] f040a900.serial: ttyS0 at MMIO 0xf040a900 (irq = 34, base_baud = 5062500) is a 16550A
<6>[    0.786921] console [ttyS0] enabled
<6>[    0.790967] f040a940.serial: ttyS1 at MMIO 0xf040a940 (irq = 35, base_baud = 5062500) is a 16550A
<6>[    0.800306] f040a980.serial: ttyS2 at MMIO 0xf040a980 (irq = 36, base_baud = 5062500) is a 16550A
<6>[    0.816646] brd: module loaded
<6>[    0.823550] loop: module loaded
<3>[    0.827544] OF: /rdb/sata@f045a000/sata-port@0: could not get #phy-cells for /rdb/sata-phy@f0458100
<4>[    0.836708] brcm-ahci f045a000.sata: masking port_map 0x3 -> 0x1
<6>[    0.842781] brcm-ahci f045a000.sata: SSS flag set, parallel bus scan disabled
<6>[    0.860015] brcm-ahci f045a000.sata: AHCI 0001.0300 32 slots 2 ports 6 Gbps 0x1 impl platform mode
<6>[    0.868996] brcm-ahci f045a000.sata: flags: 64bit ncq sntf stag pm clo pmp slum part
<6>[    0.878124] scsi host0: brcm-ahci
<6>[    0.881723] scsi host1: brcm-ahci
<6>[    0.885208] ata1: SATA max UDMA/133 mmio [mem 0xf045a000-0xf045aa9b] port 0x100 irq 44
<6>[    0.893143] ata2: DUMMY
<6>[    0.895605] brcm-ahci f045a000.sata: Broadcom AHCI SATA3 registered
<6>[    0.902626] libphy: Fixed MDIO Bus: probed
<6>[    0.907053] bcmgenet f0b00000.ethernet: GENET 4.5 EPHY: 0x1001
<6>[    0.924471] libphy: bcmgenet MII bus: probed
<6>[    0.951446] e1000e: Intel® PRO/1000 Network Driver - 3.2.6-k
<6>[    0.957302] e1000e: Copyright© 1999 - 2015 Intel Corporation.
<6>[    0.982271] ehci-brcm: EHCI BRCM driver
<6>[    0.986237] ehci-brcm f0470300.ehci: EHCI Host Controller
<6>[    0.991667] ehci-brcm f0470300.ehci: new USB bus registered, assigned bus number 1
<6>[    1.009369] ehci-brcm f0470300.ehci: irq 147, io mem 0xf0470300
<6>[    1.021472] ehci-brcm f0470300.ehci: USB 2.0 started, EHCI 1.00
<6>[    1.027952] hub 1-0:1.0: USB hub found
<6>[    1.031744] hub 1-0:1.0: 1 port detected
<6>[    1.035951] ehci-brcm f0470500.ehci: EHCI Host Controller
<6>[    1.041381] ehci-brcm f0470500.ehci: new USB bus registered, assigned bus number 2
<6>[    1.059065] ehci-brcm f0470500.ehci: irq 148, io mem 0xf0470500
<6>[    1.071474] ehci-brcm f0470500.ehci: USB 2.0 started, EHCI 1.00
<6>[    1.077858] hub 2-0:1.0: USB hub found
<6>[    1.081641] hub 2-0:1.0: 1 port detected
<6>[    1.085770] ohci-brcm: OHCI BRCM driver
<6>[    1.089776] ohci-brcm f0470400.ohci: BRCM OHCI controller
<6>[    1.095199] ohci-brcm f0470400.ohci: new USB bus registered, assigned bus number 3
<6>[    1.102848] ohci-brcm f0470400.ohci: irq 149, io mem 0xf0470400
<6>[    1.164874] hub 3-0:1.0: USB hub found
<6>[    1.168658] hub 3-0:1.0: 1 port detected
<6>[    1.172804] ohci-brcm f0470600.ohci: BRCM OHCI controller
<6>[    1.176479] ata1: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
<6>[    1.177056] ata1.00: ATA-7: WDC WD1600JS-56MHB1, 10.02E01, max UDMA/133
<6>[    1.177060] ata1.00: 312581808 sectors, multi 0: LBA48
<6>[    1.177660] ata1.00: configured for UDMA/133
<5>[    1.178020] scsi 0:0:0:0: Direct-Access     ATA      WDC WD1600JS-56M 2E01 PQ: 0 ANSI: 5
<6>[    1.208679] ohci-brcm f0470600.ohci: new USB bus registered, assigned bus number 4
<6>[    1.216350] ohci-brcm f0470600.ohci: irq 150, io mem 0xf0470600
<5>[    1.236180] sd 0:0:0:0: [sda] 312581808 512-byte logical blocks: (160 GB/149 GiB)
<5>[    1.243754] sd 0:0:0:0: Attached scsi generic sg0 type 0
<5>[    1.249249] sd 0:0:0:0: [sda] Write Protect is off
<7>[    1.254071] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
<5>[    1.254139] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
<6>[    1.276867]  sda: sda1
<6>[    1.279620] hub 4-0:1.0: USB hub found
<5>[    1.280148] sd 0:0:0:0: [sda] Attached SCSI disk
<6>[    1.288057] hub 4-0:1.0: 1 port detected
<6>[    1.292278] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
<6>[    1.298844] ehci-pci: EHCI PCI platform driver
<6>[    1.303356] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
<6>[    1.309557] ohci-pci: OHCI PCI platform driver
<6>[    1.314479] xhci-hcd f0471000.xhci: xHCI Host Controller
<6>[    1.319819] xhci-hcd f0471000.xhci: new USB bus registered, assigned bus number 5
<6>[    1.327551] xhci-hcd f0471000.xhci: hcc params 0x0250f17d hci version 0x100 quirks 0x00010010
<6>[    1.336122] xhci-hcd f0471000.xhci: irq 151, io mem 0xf0471000
<6>[    1.342685] hub 5-0:1.0: USB hub found
<3>[    1.346477] hub 5-0:1.0: config failed, hub doesn't have any ports! (err -19)
<6>[    1.353741] xhci-hcd f0471000.xhci: xHCI Host Controller
<6>[    1.359074] xhci-hcd f0471000.xhci: new USB bus registered, assigned bus number 6
<6>[    1.366616] usb usb6: We don't know the algorithms for LPM for this host, disabling LPM.
<6>[    1.375090] hub 6-0:1.0: USB hub found
<6>[    1.378869] hub 6-0:1.0: 2 ports detected
<6>[    1.383196] usbcore: registered new interface driver uas
<6>[    1.388598] usbcore: registered new interface driver usb-storage
<6>[    1.394702] usb 1-1: new high-speed USB device number 2 using ehci-brcm
<6>[    1.401550] mousedev: PS/2 mouse device common for all mice
<6>[    1.407376] i2c /dev entries driver
<6>[    1.411172] IR NEC protocol handler initialized
<6>[    1.415721] IR RC5(x/sz) protocol handler initialized
<6>[    1.420786] IR RC6 protocol handler initialized
<6>[    1.425349] IR JVC protocol handler initialized
<6>[    1.429908] IR Sony protocol handler initialized
<6>[    1.434558] IR SANYO protocol handler initialized
<6>[    1.439291] IR Sharp protocol handler initialized
<6>[    1.444026] IR MCE Keyboard/mouse protocol handler initialized
<6>[    1.449888] IR XMP protocol handler initialized
<6>[    1.454440] smssdio: Siano SMS1xxx SDIO driver
<6>[    1.458909] smssdio: Copyright Pierre Ossman
<6>[    1.463617] sdhci: Secure Digital Host Controller Interface driver
<6>[    1.469816] sdhci: Copyright© Pierre Ossman
<6>[    1.474189] sdhci-pltfm: SDHCI platform and OF driver helper
<6>[    1.482328] hub 1-1:1.0: USB hub found
<6>[    1.486346] hub 1-1:1.0: 4 ports detected
<6>[    1.517477] mmc0: SDHCI controller on f03e0200.sdhci [f03e0200.sdhci] using ADMA
<6>[    1.525051] hidraw: raw HID events driver © Jiri Kosina
<6>[    1.530628] usbcore: registered new interface driver usbhid
<6>[    1.536217] usbhid: USB HID core driver
<6>[    1.540820] NET: Registered protocol family 17
<5>[    1.545347] Key type dns_resolver registered
<6>[    1.549728] ThumbEE CPU extension supported.
<5>[    1.554019] Registering SWP/SWPB emulation handler
<6>[    1.566285] ALSA device list:
<6>[    1.569299]   No soundcards found.
<6>[    1.573302] Waiting for root device /dev/mmcblk0p3...
<6>[    1.648855] mmc0: new high speed MMC card at address 0001
<6>[    1.654685] mmcblk0: mmc0:0001 4FPD3R 3.64 GiB
<6>[    1.659367] mmcblk0boot0: mmc0:0001 4FPD3R partition 1 4.00 MiB
<6>[    1.665430] mmcblk0boot1: mmc0:0001 4FPD3R partition 2 4.00 MiB
<6>[    1.671494] mmcblk0rpmb: mmc0:0001 4FPD3R partition 3 512 KiB
<4>[    1.679329] Alternate GPT is invalid, using primary GPT.
<6>[    1.684684]  mmcblk0: p1 p2 p3 p4 p5 p6 p7 p8 p9
<3>[    1.697010] EXT4-fs (mmcblk0p3): couldn't mount as ext3 due to feature incompatibilities
<6>[    1.710624] EXT4-fs (mmcblk0p3): mounted filesystem with ordered data mode. Opts: (null)
<6>[    1.718803] VFS: Mounted root (ext4 filesystem) on device 179:3.
<6>[    1.726438] devtmpfs: mounted
<6>[    1.729825] Freeing unused kernel memory: 344K
<4>[    1.734285] This architecture does not have kernel memory protection.
<6>[    1.792647] usb 1-1.1: new full-speed USB device number 3 using ehci-brcm
<5>[    1.821842] random: fast init done
<6>[    1.896480] usb 1-1.3: new high-speed USB device number 4 using ehci-brcm
<6>[    1.921095] usb-storage 1-1.3:1.0: USB Mass Storage device detected
<6>[    1.927592] scsi host2: usb-storage 1-1.3:1.0
<6>[    2.311007] EXT4-fs (sda1): mounted filesystem with ordered data mode. Opts: (null)
<4>[    2.880434] hd51_1: loading out-of-tree module taints kernel.
<6>[    2.887424] usbcore: registered new interface driver tpm
<5>[    3.153803] scsi 2:0:0:0: Direct-Access     Lexar    USB Flash Drive  1100 PQ: 0 ANSI: 4
<5>[    3.162745] sd 2:0:0:0: Attached scsi generic sg1 type 0
<5>[    3.163252] sd 2:0:0:0: [sdb] 15634432 512-byte logical blocks: (8.00 GB/7.46 GiB)
<5>[    3.164112] sd 2:0:0:0: [sdb] Write Protect is off
<7>[    3.164118] sd 2:0:0:0: [sdb] Mode Sense: 43 00 00 00
<3>[    3.164996] sd 2:0:0:0: [sdb] No Caching mode page found
<3>[    3.165000] sd 2:0:0:0: [sdb] Assuming drive cache: write through
<6>[    3.178027]  sdb: sdb1
<5>[    3.183622] sd 2:0:0:0: [sdb] Attached SCSI removable disk
<4>[    3.413990] FAT-fs (sdb1): Volume was not properly unmounted. Some data may be corrupt. Please run fsck.
<4>[    4.906166] hd51: module_layout: kernel tainted.
<4>[    4.910837] Disabling lock debugging due to kernel taint
<6>[    6.168679] alloc_contig_range: [14800, 1ad00) PFNs busy
<6>[    7.481335] Console: switching to colour frame buffer device 160x45
<6>[    7.791263] input: dreambox remote control (native) as /devices/virtual/input/input0
<6>[    7.799563] input: dreambox advanced remote control (native) as /devices/virtual/input/input1
<6>[    7.946560] dvbdev: DVB: registering new adapter (dvb0)
<6>[    7.956530] platform dvb0.0: DVB: registering adapter 0 frontend 0 (DVB-S2)...
<6>[    7.966300] platform dvb0.0: DVB: registering adapter 0 frontend 1 (DVB-T/T2/C)...
<6>[    8.239360] input: front panel as /devices/virtual/input/input2
<6>[    8.249755] Registered IR keymap rc-cec
<6>[    8.253998] input: RC for hdmi_cec as /devices/platform/hdmi.0/rc/rc0/input3
<6>[    8.264267] rc rc0: RC for hdmi_cec as /devices/platform/hdmi.0/rc/rc0
<6>[    8.310259] EXT4-fs (mmcblk0p3): re-mounted. Opts: data=ordered
<6>[    8.689109] Console: switching to colour dummy device 80x30
<6>[    9.527474] f0b00000.etherne:01: Broadcom BCM7439 (2) PHY revision: 0x10, patch: 1
<6>[    9.536810] bcmgenet f0b00000.ethernet: configuring instance for internal PHY
<6>[    9.638002] NET: Registered protocol family 10
<6>[    9.643188] IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready
<6>[    9.649234] Segment Routing with IPv6
<5>[    9.786862] random: crng init done
<6>[   12.859724] bcmgenet f0b00000.ethernet eth0: Link is Up - 1Gbps/Full - flow control rx/tx
<6>[   12.868314] IPv6: ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready
<6>[  127.440749] sh (2182): drop_caches: 3
<6>[  128.594066] sh (2187): drop_caches: 3
<6>[  128.875840] sh (2190): drop_caches: 3
<6>[  129.129082] sh (2195): drop_caches: 3
<6>[  129.404974] sh (2198): drop_caches: 3
<6>[  129.595456] sh (2201): drop_caches: 3
<6>[  129.788389] sh (2204): drop_caches: 3
<6>[  387.707761] sh (2806): drop_caches: 3
<6>[  388.999455] sh (2813): drop_caches: 3
<6>[  389.295514] sh (2816): drop_caches: 3
<6>[  389.533176] sh (2819): drop_caches: 3

[WanWizard]

When doing what?

[Pli_user_pl]

Hi

I was wondering is there chance to add some shortcut to one of color buttons to change resolution ?

currently I'm using 4K TV and 1080p projector; both connected to A/V recevied, one is connected to main, second to sub;

when zgemma h9s with lates 7.0 is set to 2160p all is fine, but when want to play via projector i need to go to audio/video tab and change to 1080

then projector is working

 

function can be very simple and easy, like a shortcut to change resolution 2160p/1080/etc ... that i don't need to go so deep in menu options

or to set two profiles; A and B; where A can have own portion of setting, B also ... switchable via color buttom

is this possible to create such functionality ?

[darkman13]

OpenPLi Enigma2 crash log

crashdate=Tue Jan 22 16:10:21 2019
compiledate=Jan 21 2019
skin=PLi-FullNightHD/skin.xml
sourcedate=2019-01-18
branch=release-7.0
rev=9a763d6
component=Enigma2

stbmodel=hd51
stbmodel=hd51
kernelcmdline=root=/dev/mmcblk0p3 rw rootwait hd51_4.boxmode=1 brcm_cma=440M@328M brcm_cma=192M@768M console=ttyS0,115200
nimsockets=NIM Socket 0:
imageissue=openpli 7.0-release %h

REMOVE Peer hd51
REMOVE Peer hd51
Traceback (most recent call last):
  File "/usr/lib/enigma2/python/Components/ActionMap.py", line 69, in action
  File "/usr/lib/enigma2/python/Components/ActionMap.py", line 49, in action
  File "/usr/lib/enigma2/python/Screens/Menu.py", line 57, in okbuttonClick
  File "/usr/lib/enigma2/python/Tools/BoundFunction.py", line 9, in __call__
  File "/usr/lib/enigma2/python/Screens/Menu.py", line 72, in runScreen
  File "/usr/lib/enigma2/python/Screens/Menu.py", line 78, in openDialog
  File "/usr/lib/enigma2/python/mytest.py", line 289, in openWithCallback
    dlg = self.open(screen, *arguments, **kwargs)
  File "/usr/lib/enigma2/python/mytest.py", line 299, in open
    dlg = self.current_dialog = self.instantiateDialog(screen, *arguments, **kwargs)
  File "/usr/lib/enigma2/python/mytest.py", line 242, in instantiateDialog
    return self.doInstantiateDialog(screen, arguments, kwargs, self.desktop)
  File "/usr/lib/enigma2/python/mytest.py", line 259, in doInstantiateDialog
    dlg = screen(self, *arguments, **kwargs)
  File "/usr/lib/enigma2/python/Screens/ScanSetup.py", line 604, in __init__
  File "/usr/lib/enigma2/python/Screens/ScanSetup.py", line 1211, in createConfig
  File "/usr/lib/enigma2/python/Screens/ScanSetup.py", line 1571, in predefinedTerrTranspondersList
  File "/usr/lib/enigma2/python/Components/NimManager.py", line 664, in getTranspondersTerrestrial
KeyError: ''

[WanWizard]

I saw that one yesterday too. This happens when you do what?

[darkman13]

scan multisat….and scan terestrial...

Edited by darkman13, 24 January 2019 - 19:59.

[WanWizard]

Hmm... Can't reproduce that?

[Pr2]

I think that there is perhaps an error in your terrestrial.xml file:

 

File "/usr/lib/enigma2/python/Screens/ScanSetup.py", line 1571, in predefinedTerrTranspondersList
File "/usr/lib/enigma2/python/Components/NimManager.py", line 664, in getTranspondersTerrestrial

[darkman13]

Automatic scan.....crash

 

Terestrial....crash...

[WanWizard]

Login with telnet, and type the command:

opkg install tuxbox-common --force-reinstall

this will restore your transponder xml files to the openpli default, if the problem disappears, Pr2 was right, and you installed a channel list with a corrupt xml.

[littlesat]

I think that there is perhaps an error in your terrestrial.xml file:

 

100% sure! Or not available...

 

Could be work-a-round by adding some kind of sanity checks... (not tested) But not needed if the xml file is there properly!

 

Change line 664:

 

return self.transpondersterrestrial.get(region, {})

 

Change line 712

 

return self.terrestrialsList and self.terrestrialsList[config.Nims.get([nim].terrestrial.index][0]

And then also on other locations..

 

715

return self.terrestrialsList and self.terrestrialsList[config.Nims[nim].terrestrial.index][1]

Edited by littlesat, 25 January 2019 - 15:56.

[WanWizard]

Reinstalling tuxbox-common will fix any broken XML file.

[darkman13]

it is OK....

 

Many thanks to all.

[littlesat]

[Erik Slagter]

I did a full scan yesterday (S and C) an no errors either.

Edited by Erik Slagter, 25 January 2019 - 18:49.

[Pr2]

 

I think that there is perhaps an error in your terrestrial.xml file:

 

100% sure! Or not available...

 

Could be work-a-round by adding some kind of sanity checks... (not tested) But not needed if the xml file is there properly!

 

Change line 664:

 

return self.transpondersterrestrial.get(region, {})

 

Change line 712

 

return self.terrestrialsList and self.terrestrialsList[config.Nims.get([nim].terrestrial.index][0]

And then also on other locations..

 

715

return self.terrestrialsList and self.terrestrialsList[config.Nims[nim].terrestrial.index][1]

 

 

OpenPLi was always very sensitive to error in .xml files, but I was thinking that it was already fixed.