Posted 15 November 2018 - 21:09
No.
It means that with some hacks it starts. It is not stable, it crashes, it doesn't work together with other processes that access the framebuffer, so it is not fit for production.
And given the fact we're already at the stage of a pre-release (a release candidate), it VU+ can get it stable, it will not be for OpenPLi 7.0.
Currently in use: VU+ Duo 4K (2xFBC S2), VU+ Solo 4K (1xFBC S2), uClan Usytm 4K Ultimate (S2+T2), Octagon SF8008 (S2+T2), Zgemma H9.2H (S2+T2)
Due to my bad health, I will not be very active at times and may be slow to respond. I will not read the forum or PM on a regular basis.
Many answers to your question can be found in our new and improved wiki.
Posted 15 November 2018 - 21:34
WaveFrontier 28.2E | 23.5E | 19.2E | 16E | 13E | 10/9E | 7E | 5E | 1W | 4/5W | 15W
Posted 15 November 2018 - 21:55
But we need a solution for the framebuffer crash?
Yes. I don't want to release an image that we know can crash. OpenPLi makes stable images, and if that means they aren't bleeding edge, so be it.
Also, there isn't a good solution for the missing libssl/libcrypto yet, that is being worked on, and therefore not ready for the release.
Currently in use: VU+ Duo 4K (2xFBC S2), VU+ Solo 4K (1xFBC S2), uClan Usytm 4K Ultimate (S2+T2), Octagon SF8008 (S2+T2), Zgemma H9.2H (S2+T2)
Due to my bad health, I will not be very active at times and may be slow to respond. I will not read the forum or PM on a regular basis.
Many answers to your question can be found in our new and improved wiki.
Posted 16 November 2018 - 07:29
Is it a shame to think that it will repair over time?
Posted 16 November 2018 - 09:57
We have now 7.0->rc,,, this means we have to 'close the doors' for new big thinks as this 'locks' the rc to being released and actually it blocks more features being come out earlier... as soon 7.0 is released it can be in 7.1-rc (when we indeed go for it) or 8.0 (sumo)...
To add Chromium is a relative big change...
OpenATV6.3 is still beta https://www.opena.tv...527/index3.html
OpenPLi7.0 is a Release Candidate... So this should be already very stable as we internally tested it so we only should allow real bug fixes here and not add new features.,
Edited by littlesat, 16 November 2018 - 09:58.
WaveFrontier 28.2E | 23.5E | 19.2E | 16E | 13E | 10/9E | 7E | 5E | 1W | 4/5W | 15W
Posted 17 November 2018 - 08:36
Ok, so we can see in the next releases. Thanks
Posted 17 November 2018 - 09:00
WaveFrontier 28.2E | 23.5E | 19.2E | 16E | 13E | 10/9E | 7E | 5E | 1W | 4/5W | 15W
Posted 17 November 2018 - 11:33
Posted 17 November 2018 - 11:43
Will it be possible to update from 6.2 to 7.0 or what is the best way for the update?
Posted 17 November 2018 - 12:21
Are there any updated drivers for Vu+ Duo2 in this release (compared to v6.2)?
Posted 17 November 2018 - 14:55
Are there any updated drivers for Vu+ Duo2 in this release (compared to v6.2)?
Hmm.. i have configuration on Duo 2 : A/B is motorized 180 cm dish with dual LNB and C/D is fixed 90 cm dish with also dual band LNB for Hot Bird and on 6.2 and 7 rc, still in info show available tuners A-B but C/D not !!!!!! this is some bug or what ??? Also i think becouse of that on Full HD skin not show over using tuners on right side actual motorized antenna position.However tuners C/D are working for watching and recording.Any ideas ? 
Sony OLED 83' A90J 
Panasonic UHD UB9000 , ONKYO TX-NR929, HOME CINEMA 9.1 , VU+ DUO 4K SE ,VU+ Ultimo 4K Full config, 180 cm Parabolic DISH/ Dual LNB - Full orbit 75E-45W , 80 cm offset dish with unicable LNB for Hot Bird. Humax Icord HD , DUNE HD Max Vision 4K.
Posted 17 November 2018 - 15:59
Hello, After yesterday's update, VU + Solo2 does not send an EPG stream over the network to the E2Stream program. In the first version 7.0 of November 12, 2018 everything works fine.
Nothing has changed in the code between the two build runs.
Currently in use: VU+ Duo 4K (2xFBC S2), VU+ Solo 4K (1xFBC S2), uClan Usytm 4K Ultimate (S2+T2), Octagon SF8008 (S2+T2), Zgemma H9.2H (S2+T2)
Due to my bad health, I will not be very active at times and may be slow to respond. I will not read the forum or PM on a regular basis.
Many answers to your question can be found in our new and improved wiki.
Posted 17 November 2018 - 16:01
Are there any updated drivers for Vu+ Duo2 in this release (compared to v6.2)?
No, the latest drivers for the Duo2 are dated 20180319.
Currently in use: VU+ Duo 4K (2xFBC S2), VU+ Solo 4K (1xFBC S2), uClan Usytm 4K Ultimate (S2+T2), Octagon SF8008 (S2+T2), Zgemma H9.2H (S2+T2)
Due to my bad health, I will not be very active at times and may be slow to respond. I will not read the forum or PM on a regular basis.
Many answers to your question can be found in our new and improved wiki.
Posted 17 November 2018 - 16:03
Hmm.. i have configuration on Duo 2 : A/B is motorized 180 cm dish with dual LNB and C/D is fixed 90 cm dish with also dual band LNB for Hot Bird and on 6.2 and 7 rc, still in info show available tuners A-B but C/D not !!!!!! this is some bug or what ??? Also i think becouse of that on Full HD skin not show over using tuners on right side actual motorized antenna position.However tuners C/D are working for watching and recording.Any ideas ?
What is visible in Information / About? Can you post a screenshot?
Currently in use: VU+ Duo 4K (2xFBC S2), VU+ Solo 4K (1xFBC S2), uClan Usytm 4K Ultimate (S2+T2), Octagon SF8008 (S2+T2), Zgemma H9.2H (S2+T2)
Due to my bad health, I will not be very active at times and may be slow to respond. I will not read the forum or PM on a regular basis.
Many answers to your question can be found in our new and improved wiki.
Posted 17 November 2018 - 17:46
Are there any updated drivers for Vu+ Duo2 in this release (compared to v6.2)?
No, the latest drivers for the Duo2 are dated 20180319.
Ok, thanks for the update!
Posted 19 November 2018 - 11:46
vu + ultimo 4k satellite dvbs2 single tuner, tuner output to the other satellite receiver I made the connection, although the other device is in the stantby position vu + ultimo 4k sometimes signal no error, there is a solution ... the same process vu + solo se v1 with a good job is done. .
Edited by emfa, 19 November 2018 - 11:47.
Posted 19 November 2018 - 11:50
No idea what you write here?
Currently in use: VU+ Duo 4K (2xFBC S2), VU+ Solo 4K (1xFBC S2), uClan Usytm 4K Ultimate (S2+T2), Octagon SF8008 (S2+T2), Zgemma H9.2H (S2+T2)
Due to my bad health, I will not be very active at times and may be slow to respond. I will not read the forum or PM on a regular basis.
Many answers to your question can be found in our new and improved wiki.
Posted 21 November 2018 - 10:30
Hello all,
vu+ ultimo4k, OpenPLI 7, built-in WLAN does not work. I had to hook up the cable. Is it a driver problem or something else? Wirellesslan plugin installed. In the previous version it worked without any problems. Any ideas?
Posted 21 November 2018 - 10:31
We are aware of that. The change by VU+ in the BSP that introduced the VU Duo 4K drivers broke it. VU+ needs to fix that, they use non-standard drivers that need special init scripts.
Currently in use: VU+ Duo 4K (2xFBC S2), VU+ Solo 4K (1xFBC S2), uClan Usytm 4K Ultimate (S2+T2), Octagon SF8008 (S2+T2), Zgemma H9.2H (S2+T2)
Due to my bad health, I will not be very active at times and may be slow to respond. I will not read the forum or PM on a regular basis.
Many answers to your question can be found in our new and improved wiki.
Posted 23 November 2018 - 22:08
Hello, I have a small request to the developers, please install the new version of the plugin for Duo2 LCD4 linux 5.0-r4_ now there is an old version "V4.9-r0"
Alcohol for wimps. Strong people enjoy depression.
0 members, 2 guests, 0 anonymous users
