502 replies to this topic

[littlesat]

FYI..

https://github.com/O...d77b11c1f5de9e5

[Taapat]

FYI..

https://github.com/O...d77b11c1f5de9e5

 

Fix in dvelop, so in OpenPli 7 (branch rc) will not be fixed.

[littlesat]

I do not think this is a high priority fix... It is in there for >12 years or so and it's the first note of this kind of crash... But the 'team' can still consider to cherry-pick this in develop and/or we revert it in develop, push in rc and then merge in develop.

We should avoid making new changes in RC I think!

Edited by littlesat, 27 November 2018 - 14:31.

[Taapat]

I think that here need to add an additional check (not tested): https://github.com/O...iceBox.py#L213 
 

 	def displayDescription(self, curpos=0):
		if len(self.list) > 1 and len(self.list[curpos][0]) > 2 and isinstance(self.list[curpos][0][2], str):
			self["description"].setText(self.list[curpos][0][2])
		else:
			self["description"].setText("")

  
Looking at the code I assume that the same GSOD can get also in load_playlist() if playlist not found.
And such a GSOD is possible everywhere where the list is empty.

Edited by Taapat, 27 November 2018 - 14:58.

[littlesat]

Yep indeed a more than 12 year old bug.... and when you fix that there you got other side effects... better not show the list when there is no list... so when there is no list show a message box there is no list just like I did for the delete

Edited by littlesat, 27 November 2018 - 18:47.

[andriup1]

Hello Guys.
I installed openpli 7.0 on my VU+ uno 4k se.
I can’t make it to run Cccam.

Any solution for this issue?

Thanks

[WanWizard]

There is no OpenPLi 7, there is only a 7.0-rc, which is a test image!

 

Difficult to say, we have no clue what you have done and why you can't.

[bril]

Mutant HD51

 

With the last image I get the error "nothing provides requested mtd-utils-ubifs".

 

It will not reinstall the backup. Manual I tried Oscam, but the same error, see print screen.

Attached Files

•  IMG_20181128_130403.jpg   78.89KB   5 downloads
•  IMG_20181128_131013.jpg   83.15KB   3 downloads

Edited by bril, 28 November 2018 - 13:12.

[isteric2005]

I did all the tests imaginable,
I use mountmanager, configure the USB stick as media / usb
save the settings and everything is ok.
Restarting the decoder (zgemma H7C) the pen is not mounted

[WanWizard]

With the last image I get the error "nothing provides requested mtd-utils-ubifs".

 

When you do what?

 

The package is available on the server for all architectures:

./mips32el-nf/mtd-utils-ubifs_2.0.0-r0.0_mips32el-nf.ipk
./armv7ahf-neon/mtd-utils-ubifs_2.0.0-r0.0_armv7ahf-neon.ipk
./cortexa15hf-neon-vfpv4/mtd-utils-ubifs_2.0.0-r0.0_cortexa15hf-neon-vfpv4.ipk
./aarch64/mtd-utils-ubifs_2.0.0-r0.0_aarch64.ipk
./mips32el/mtd-utils-ubifs_2.0.0-r0.0_mips32el.ipk

if you are albe to login with telnet, can you type

opkg update
opkg install mtd-utils-ubifs

and post the result here.

[ColinB]

There is no OpenPLi 7, there is only a 7.0-rc, which is a test image!

 

Difficult to say, we have no clue what you have done and why you can't.

 

As I tried to point out before there is a problem with openpli-7.0-rc-et8000-20181125. When flashed It does not install softcam manager and softcams. Some plugin were missing from the autobackup, including backupsuite.

 

There are numerous error messages while the stb tries to download the backup files. They are of the type "solver cannot"  The image which is no longer available from 21-11 was working fine but displayed the software update need 250+ updates.

Edited by ColinB, 28 November 2018 - 13:28.

[WanWizard]

I did all the tests imaginable,
I use mountmanager, configure the USB stick as media / usb
save the settings and everything is ok.
Restarting the decoder (zgemma H7C) the pen is not mounted

 

No clue what the mountmanager is or does, but it is not needed, usb devices should be detected and mounted automatically.

[WanWizard]

As I tried to point out before there is a problem with openpli-7.0-rc-et8000-20181125. When flashed It does not install softcam manager and softcams. Some plugin were missing from the autobackup, including backupsuite.

 

You mean it doesn't install when you restore a backup?

 

What is the output when you install the backupsuite from the commandline?

opkg update
opkg install enigma2-plugin-extensions-backupsuite

[isteric2005]

 

I did all the tests imaginable,
I use mountmanager, configure the USB stick as media / usb
save the settings and everything is ok.
Restarting the decoder (zgemma H7C) the pen is not mounted

 

No clue what the mountmanager is or does, but it is not needed, usb devices should be detected and mounted automatically.

 

sure mounta but as media / sda1 I need media / usb

[ColinB]

 

As I tried to point out before there is a problem with openpli-7.0-rc-et8000-20181125. When flashed It does not install softcam manager and softcams. Some plugin were missing from the autobackup, including backupsuite.

 

You mean it doesn't install when you restore a backup?

 

What is the output when you install the backupsuite from the commandline?

opkg update
opkg install enigma2-plugin-extensions-backupsuite

 

Give me half an hour and I will re-flash 7.0-rc 25-11. I'm on 6,2 at the moment.

 

Tell me does it creare an autoinstall log and where can I find it ?

Edited by ColinB, 28 November 2018 - 13:49.

[WanWizard]

sure mounta but as media / sda1 I need media / usb

 

Then it's detects a device named "usb" already exists, for example in your fstab.

 

If you want to force a device name, label the device, OpenPLi uses the label to create the mountpoint.

[ColinB]

 

 

As I tried to point out before there is a problem with openpli-7.0-rc-et8000-20181125. When flashed It does not install softcam manager and softcams. Some plugin were missing from the autobackup, including backupsuite.

 

You mean it doesn't install when you restore a backup?

 

What is the output when you install the backupsuite from the commandline?

opkg update
opkg install enigma2-plugin-extensions-backupsuite

 

Give me half an hour and I will re-flash 7.0-rc 25-11. I'm on 6,2 at the moment.

 

Tell me does it creare an autoinstall log and where can I find it ?

 

 

The error thats causing the problem is the same as in post 208 above.

 

Its complaining about mtd-utils. Once this error is triggered nothing (plugins) gets installed after it.

[WanWizard]

I know that, but without appropriate debug information I can't do anything. All I have now is a message from you saying "can't install" and a server that says "but it is there".

[ColinB]

openpli 7.0-rc et8000

et8000 login: root
root@et8000:~# opkg update
Downloading http://downloads.ope...000/Packages.gz.
Updated source 'openpli-3rd-party-et8000'.
Downloading http://downloads.ope...rty/Packages.gz.
Updated source 'openpli-3rd-party'.
Downloading http://downloads.ope...all/Packages.gz.
Updated source 'openpli-all'.
Downloading http://downloads.ope...000/Packages.gz.
Updated source 'openpli-et8000'.
Downloading http://downloads.ope...2el/Packages.gz.
Updated source 'openpli-mips32el'.
Downloading http://downloads.ope...ons/Packages.gz.
Updated source 'openpli-picons'.
root@et8000:~# opkg upgrade


Collected errors:
 * Solver encountered 2 problem(s):
 * Problem 1/2:
 *   - nothing provides requested mtd-utils-ubifs
 *
 * Solution 1:
 *   - do not ask to install a package providing mtd-utils-ubifs

 * Problem 2/2:
 *   - nothing provides requested mtd-utils
 *
 * Solution 1:
 *   - do not ask to install a package providing mtd-utils

root@et8000:~# opkg list *ubifs
mtd-utils-ubifs - 2.0.0-r0.0 - Tools for managing memory technology devices
 Tools for managing memory technology devices.
root@et8000:~# opkg install mtd-utils-ubifs


Collected errors:
 * Solver encountered 2 problem(s):
 * Problem 1/2:
 *   - nothing provides requested mtd-utils-ubifs
 *
 * Solution 1:
 *   - do not ask to install a package providing mtd-utils-ubifs

 * Problem 2/2:
 *   - nothing provides requested mtd-utils
 *
 * Solution 1:
 *   - do not ask to install a package providing mtd-utils

root@et8000:~# opkg list *backupsuite
enigma2-plugin-extensions-backupsuite - 26+git411+80a4dbc-r0.0 - Enigma2 Plugin: extensions-backupsuite
 Enigma2 Plugin: extensions-backupsuite
root@et8000:~# opkg install enigma2-plugin-extensions-backupsuite



Collected errors:
 * Solver encountered 3 problem(s):
 * Problem 1/3:
 *   - nothing provides requested mtd-utils-ubifs
 *
 * Solution 1:
 *   - do not ask to install a package providing mtd-utils-ubifs

 * Problem 2/3:
 *   - nothing provides requested mtd-utils
 *
 * Solution 1:
 *   - do not ask to install a package providing mtd-utils

 * Problem 3/3:
 *   - nothing provides mtd-utils needed by enigma2-plugin-extensions-backupsuite-26+git411+80a4dbc-r0.0.mips32el
 *
 * Solution 1:
 *   - do not ask to install a package providing enigma2-plugin-extensions-backupsuite

root@et8000:~#
 

[ColinB]

I know that, but without appropriate debug information I can't do anything. All I have now is a message from you saying "can't install" and a server that says "but it is there".

Please tell me how ?