Posted 29 November 2018 - 15:28
There seems to be an issue with opkg, but we haven't found it yet.
Using wget to manually download all ipks works fine, so there is nothing wrong with the distribution system. Also "opkg info" works, suggesting there is nothing wrong with the package index too.
Currently in use: VU+ Duo 4K (2xFBC S2), VU+ Solo 4K (1xFBC S2), uClan Usytm 4K Ultimate (S2+T2), Octagon SF8008 (S2+T2), Zgemma H9.2H (S2+T2)
Due to my bad health, I will not be very active at times and may be slow to respond. I will not read the forum or PM on a regular basis.
Many answers to your question can be found in our new and improved wiki.
Posted 29 November 2018 - 21:32
What the hell just happened with plugins 
latest build from 29 11 ruined me all , automatic fullbackup won't work and i have to back to 6.2 to see if i can bring back all.Guys i think you must slow down with this 7.0 rc 
Sony OLED 83' A90J 
Panasonic UHD UB9000 , DENON AVC-A1H, Atmos 7.1.4 , VU+ DUO 4K SE ,VU+ Ultimo 4K Full config, 180 cm Parabolic DISH/ Dual LNB - Full orbit 75E-45W , 80 cm offset dish with unicable LNB for Hot Bird. Humax Icord HD , DUNE HD Max Vision 4K.
Posted 29 November 2018 - 21:50
Edited by betacentauri, 29 November 2018 - 21:50.
Posted 29 November 2018 - 22:03
There is no problem in rc7.0. There is a problem with the cache of the feed server.
OK but overall seems that plugin-automatic fullbackup doesn't work from the begening of 7.0 rc, only show that there is no files to restore, however whole image and rest are stored properly, from 6.2 i was able to restore to 7.0 rc .
Edited by ROMAN42, 29 November 2018 - 22:07.
Sony OLED 83' A90J Panasonic UHD UB9000 , DENON AVC-A1H, Atmos 7.1.4 , VU+ DUO 4K SE ,VU+ Ultimo 4K Full config, 180 cm Parabolic DISH/ Dual LNB - Full orbit 75E-45W , 80 cm offset dish with unicable LNB for Hot Bird. Humax Icord HD , DUNE HD Max Vision 4K.
Posted 29 November 2018 - 22:05
Which box do you use?
I try to inform Dimitrij who is the author of the plugin.
Posted 29 November 2018 - 22:12
With multiboot version of rc7.0 i don't have the problems mentioned by the other members.Automatic fullbackup works and i can install plugins and softcams.
My box is Mutant hd51.
Posted 29 November 2018 - 22:14
Problem with the feed server is hopefully fixed now.
Posted 29 November 2018 - 22:28
Problem with the feed server is hopefully fixed now.
yes confirm
download et install is working fine
last 7.0 29/11
much thxxxxxx
Posted 29 November 2018 - 22:28
Thanks for the feedback.
Currently in use: VU+ Duo 4K (2xFBC S2), VU+ Solo 4K (1xFBC S2), uClan Usytm 4K Ultimate (S2+T2), Octagon SF8008 (S2+T2), Zgemma H9.2H (S2+T2)
Due to my bad health, I will not be very active at times and may be slow to respond. I will not read the forum or PM on a regular basis.
Many answers to your question can be found in our new and improved wiki.
Posted 29 November 2018 - 22:35
Thanks for the feedback.
thanks at pli group for your great work
have good night
Posted 29 November 2018 - 23:45
Which box do you use?
I try to inform Dimitrij who is the author of the plugin.
VU+ DUO 2 and good to hear so problem with plugins is fixed.Thanks.
Sony OLED 83' A90J Panasonic UHD UB9000 , DENON AVC-A1H, Atmos 7.1.4 , VU+ DUO 4K SE ,VU+ Ultimo 4K Full config, 180 cm Parabolic DISH/ Dual LNB - Full orbit 75E-45W , 80 cm offset dish with unicable LNB for Hot Bird. Humax Icord HD , DUNE HD Max Vision 4K.
Posted 30 November 2018 - 08:38
[et8000] All good now on 7.0-rc 29-11
many thanks.
Xtrend et8000 7.1-Release
2 x 8/1 DiSEqC 30w 13e 19e 23e 28e
Astrometa USB Tuner Working DVB-T2 now on Kernel 4.10+ 
WD10EARX 1TB
Sandisk 32GB USB for AFB, EPG, Picons & Timeshift
ZGemma Star S 7.0-Release
4/1 DiSEqC 30w 13e 19e 28e
Sandisk 8GB USB for AFB, EPG, Picons & Timeshift
LG 49UH610V UHD-HDR
UHF/Cable/Sat
E-Channelizer
Posted 30 November 2018 - 09:34
Yes works nice again with last flash. Thanks.
Mut@ntHD51 STB 4K 2x, Openpli 7.1 release , 60 cm schotel 2x duo-lnb, 19.2/23.5 vaste opstelling, Panasonic TXL55DT50E
Posted 30 November 2018 - 10:37
three problems on the ET6X00
1. In Deep-standby mode, receiver will not turn on after a few minutes
2. In OpenPLi 7.0, audio is disconnected when playing video files. To fix the problem, the audio button must be pressed and the audio track selected again.
3. Sometimes the receiver Hang up when switching channels or satellites.
Sorry for translation
Posted 30 November 2018 - 13:45
where is the youtube plugin over hbbtv ?
Posted 30 November 2018 - 16:44
After installing todays build , vu+ duo 2 restore autosettings but won't install any plugins automaticly like in previous builds, now i have to install them one by one
Sony OLED 83' A90J Panasonic UHD UB9000 , DENON AVC-A1H, Atmos 7.1.4 , VU+ DUO 4K SE ,VU+ Ultimo 4K Full config, 180 cm Parabolic DISH/ Dual LNB - Full orbit 75E-45W , 80 cm offset dish with unicable LNB for Hot Bird. Humax Icord HD , DUNE HD Max Vision 4K.
Posted 30 November 2018 - 16:58
Don't install a test image if you're not willing to test.
What doesn't install? Any errors? And why does a restore not work but manual install does?
Currently in use: VU+ Duo 4K (2xFBC S2), VU+ Solo 4K (1xFBC S2), uClan Usytm 4K Ultimate (S2+T2), Octagon SF8008 (S2+T2), Zgemma H9.2H (S2+T2)
Due to my bad health, I will not be very active at times and may be slow to respond. I will not read the forum or PM on a regular basis.
Many answers to your question can be found in our new and improved wiki.
Posted 30 November 2018 - 23:57
Don't install a test image if you're not willing to test.
What doesn't install? Any errors? And why does a restore not work but manual install does?
i can't say couse during update i wasn't watching the screen so like i was wriiten any additional plugins wasn't auto install.
Sony OLED 83' A90J Panasonic UHD UB9000 , DENON AVC-A1H, Atmos 7.1.4 , VU+ DUO 4K SE ,VU+ Ultimo 4K Full config, 180 cm Parabolic DISH/ Dual LNB - Full orbit 75E-45W , 80 cm offset dish with unicable LNB for Hot Bird. Humax Icord HD , DUNE HD Max Vision 4K.
Posted 1 December 2018 - 15:19
mut@nt hd51
install kodi...reboot ..black screen 
..pli not booting
Posted 3 December 2018 - 08:05
Ok, read all the post.
First of all, congrats for all the job done, OpenPli is really a good OS.
But, prior to update from 6.2, I have a question about the DVB drivers: I have tried all the 3.13.5 drivers present in Archives, but with all, I still have the DVB crashes with the spinner. Will this problem be solved in OpenPli 7? (seems to me that I read in the post that the driver are always the same, last version from 20180319?, if I have understood well)?
If not solved, is there a way to move Vu+ to correct this?
Thanks for your answer.
Edited by Raybobo, 3 December 2018 - 08:07.
LG Oled C9
Vu+Duo4KSe
Yamaha 5.1 system
Qnap NAS 2Tb
1 wife
2 childs
2 dogs
4 cats 
0 members, 1 guests, 0 anonymous users
