OpenPli 7 news and information
Re: OpenPli 7 news and information #261
Posted 3 December 2018 - 08:09
NO SUPPORT by PM, it is a forum make your question public so everybody can benefit from the question/answer.
If you think that my answer helps you, you can press the up arrow in bottom right of the answer.
Wanna help with OpenPLi Translation? Please read our Wiki Information for translators
Sat: Hotbird 13.0E, Astra 19.2E, Eutelsat5A 5.0W
VU+ Solo 4K: 2*DVB-S2 + 2*DVB-C/T/T2 (used in DVB-C) & Duo 4K: 2*DVB-S2X + DVB-C (FBC)
AB-Com: PULSe 4K 1*DVB-S2X (+ DVB-C/T/T2)
Edision OS Mio 4K: 1*DVB-S2X + 1*DVB-C/T/T2
Re: OpenPli 7 news and information #262
Posted 4 December 2018 - 06:16
What DVB driver are you referring to? OpenPli doesn't include any external DVB driver by default in its image. If you try to connect an usb DVB tuner you then need to know which driver to install from the feed, starting playing around with driver found elsewhere is certainly a bad idea.
About VU.
http://archive.vuplu...wnload/drivers/
Use the latest image if you want.
Find earlier driver in the list for your receiver.
Extract and replace the files in root/lib/module/.#.#.#/extra/...
and restart complete.
I just followed the instructions given by Jork, and I have tried all the DVB drivers in version 3.13.5
procmk.ko
fpga_directc.ko
dvb-bcm7424.ko
brcmfb.ko
Edited by Raybobo, 4 December 2018 - 06:18.
LG Oled C9
Vu+Duo4KSe
Yamaha 5.1 system
Qnap NAS 2Tb
1 wife
2 childs
2 dogs
4 cats
Re: OpenPli 7 news and information #263
Posted 4 December 2018 - 14:36
Why are you trying to change the DVB driver? Just use OpenPLi image with the provided drivers and your VU+ tuners will work.
NO SUPPORT by PM, it is a forum make your question public so everybody can benefit from the question/answer.
If you think that my answer helps you, you can press the up arrow in bottom right of the answer.
Wanna help with OpenPLi Translation? Please read our Wiki Information for translators
Sat: Hotbird 13.0E, Astra 19.2E, Eutelsat5A 5.0W
VU+ Solo 4K: 2*DVB-S2 + 2*DVB-C/T/T2 (used in DVB-C) & Duo 4K: 2*DVB-S2X + DVB-C (FBC)
AB-Com: PULSe 4K 1*DVB-S2X (+ DVB-C/T/T2)
Edision OS Mio 4K: 1*DVB-S2X + 1*DVB-C/T/T2
Re: OpenPli 7 news and information #264
Posted 4 December 2018 - 17:50
In case of those DVB Drivers , i have on Vu Duo 2 as two dual dvb-s2 tuners which means 4 tuners A/B/C/D as configurations A/B for motorized dish and C/D for fixed dish.But since 6.2 image in main menu>information>about , show only :detected nims as Tuner A-B , no info about C/D !!!!! which i think may couse that there is no info in Full HD skin about current motorized antenna position.Previously was above resolutions/tuners info on right side.
Sony OLED 83' A90J Panasonic UHD UB9000 , DENON AVC-A1H, Atmos 7.1.4 , VU+ DUO 4K SE ,VU+ Ultimo 4K Full config, 180 cm Parabolic DISH/ Dual LNB - Full orbit 75E-45W , 80 cm offset dish with unicable LNB for Hot Bird. Humax Icord HD , DUNE HD Max Vision 4K.
Re: OpenPli 7 news and information #265
Re: OpenPli 7 news and information #266
Posted 5 December 2018 - 06:19
Why are you trying to change the DVB driver? Just use OpenPLi image with the provided drivers and your VU+ tuners will work.
Because of frequent crashes with Vu+ frozen and spinner working hard!
LG Oled C9
Vu+Duo4KSe
Yamaha 5.1 system
Qnap NAS 2Tb
1 wife
2 childs
2 dogs
4 cats
Re: OpenPli 7 news and information #267
Posted 5 December 2018 - 17:54
Crash generates crash log on the HDD post them here and we will see, it is probably one of the plugin you use or the skin that you use that generates those crashes.
NO SUPPORT by PM, it is a forum make your question public so everybody can benefit from the question/answer.
If you think that my answer helps you, you can press the up arrow in bottom right of the answer.
Wanna help with OpenPLi Translation? Please read our Wiki Information for translators
Sat: Hotbird 13.0E, Astra 19.2E, Eutelsat5A 5.0W
VU+ Solo 4K: 2*DVB-S2 + 2*DVB-C/T/T2 (used in DVB-C) & Duo 4K: 2*DVB-S2X + DVB-C (FBC)
AB-Com: PULSe 4K 1*DVB-S2X (+ DVB-C/T/T2)
Edision OS Mio 4K: 1*DVB-S2X + 1*DVB-C/T/T2
Re: OpenPli 7 news and information #268
Posted 6 December 2018 - 07:27
Crash generates crash log on the HDD post them here and we will see, it is probably one of the plugin you use or the skin that you use that generates those crashes.
Ok, thanks, here under the last log I found. Strange because the date is not yesterday, as I have had one yesterday too...
Hope this helps and that you may find something to solve it, because I really like OP.
OpenPLi Enigma2 crash log
Edited by Raybobo, 6 December 2018 - 07:29.
LG Oled C9
Vu+Duo4KSe
Yamaha 5.1 system
Qnap NAS 2Tb
1 wife
2 childs
2 dogs
4 cats
Re: OpenPli 7 news and information #269
Posted 6 December 2018 - 07:37
I think you will have a driver crash that doesn´t leave a crashlog from enigma.
You can make the following.
If you have a the next crash, please goto the linux command line with telnet/shh and give the command
dmesg
I think there you will see a driver crash messages at the end of dmesg output but enigma doesn´t write a crashlog because enigma has no crashes at that time.
Sometimes I have that situation with my uno4kse and openpli 6.1 but not so often. The last one was about 16 days ago in the past
Receiver:2 x Uno4k SE (PLI 7.3 rel), 1 x ET9200 (PLI 4.0), NAS: 2 x QNAP 410, TV: LG 65C8llla, LG 47LB570V, LG 42LM615S, Sound: Yamaha RX-v663, Teufel System 5 THX
Re: OpenPli 7 news and information #270
Posted 9 December 2018 - 15:02
[et8000] 7.0-FC 8-12-18
I have a minor issue that seems to be carried over from 6.2
When flashing new image with autobackup. It allways forgets that my USB tuner is Terestrial and has it listed in the tuner config as cable.
It remembers that I'm using Chrystal Palace transmiter.
Other than that all is working fine so far. The USB tuner drivers and firmware (Astrometa-DVB-T2-C-DAB) gets installed perfect. I only need an additional rebbot to initiate my Engma2-prestart script.
Keep up the geat work.
Thanks Colin
Xtrend et8000 7.1-Release
2 x 8/1 DiSEqC 30w 13e 19e 23e 28e
Astrometa USB Tuner Working DVB-T2 now on Kernel 4.10+
WD10EARX 1TB
Sandisk 32GB USB for AFB, EPG, Picons & Timeshift
ZGemma Star S 7.0-Release
4/1 DiSEqC 30w 13e 19e 28e
Sandisk 8GB USB for AFB, EPG, Picons & Timeshift
LG 49UH610V UHD-HDR
UHF/Cable/Sat
E-Channelizer
Re: OpenPli 7 news and information #271
Posted 9 December 2018 - 16:23
Today, as enough crashes in the day, without telnet check for the log, installed version 7.
Update done fast and efficiently, nothing lost, all the settings back automatically in the install process.
Good job, congrats to the team.
And I will see what happens. If i can eliminate this crashes, I will have, for me, the perfect sat receiver and perfect OS.
LG Oled C9
Vu+Duo4KSe
Yamaha 5.1 system
Qnap NAS 2Tb
1 wife
2 childs
2 dogs
4 cats
Re: OpenPli 7 news and information #272
Posted 9 December 2018 - 17:44
When flashing new image with autobackup. It allways forgets that my USB tuner is Terestrial and has it listed in the tuner config as cable.
It remembers that I'm using Chrystal Palace transmiter.
What does
cat /etc/enigma2/settings | grep multiType
tell you, in a working situation, and after a flash + restore?
I just tried with an Amiko box with internal C/T tuner, and with that it is not a problem, it remembers both the type and the transmitter. So it may be related with the fact it is a USB tuner?
Currently in use: VU+ Duo 4K (2xFBC S2), VU+ Solo 4K (1xFBC S2), uClan Usytm 4K Ultimate (S2+T2), Octagon SF8008 (S2+T2), Zgemma H9.2H (S2+T2)
Due to my bad health, I will not be very active at times and may be slow to respond. I will not read the forum or PM on a regular basis.
Many answers to your question can be found in our new and improved wiki.
Re: OpenPli 7 news and information #273
Posted 9 December 2018 - 17:58
openpli 7.0-rc et8000
et8000 login: root
root@et8000:~# cat /etc/enigma2/settings | grep multiType
config.Nims.2.multiType=1
root@et8000:~#
Xtrend et8000 7.1-Release
2 x 8/1 DiSEqC 30w 13e 19e 23e 28e
Astrometa USB Tuner Working DVB-T2 now on Kernel 4.10+
WD10EARX 1TB
Sandisk 32GB USB for AFB, EPG, Picons & Timeshift
ZGemma Star S 7.0-Release
4/1 DiSEqC 30w 13e 19e 28e
Sandisk 8GB USB for AFB, EPG, Picons & Timeshift
LG 49UH610V UHD-HDR
UHF/Cable/Sat
E-Channelizer
Re: OpenPli 7 news and information #274
Posted 9 December 2018 - 17:59
That seems correct for DVB-T to me. Is that now, or directly after a flash + restore?
Edited by WanWizard, 9 December 2018 - 18:00.
Currently in use: VU+ Duo 4K (2xFBC S2), VU+ Solo 4K (1xFBC S2), uClan Usytm 4K Ultimate (S2+T2), Octagon SF8008 (S2+T2), Zgemma H9.2H (S2+T2)
Due to my bad health, I will not be very active at times and may be slow to respond. I will not read the forum or PM on a regular basis.
Many answers to your question can be found in our new and improved wiki.
Re: OpenPli 7 news and information #275
Posted 9 December 2018 - 18:18
This after I have manually change it to DVB-T2
As per my original post. It defaults to cable.
It is possibly worth mentioning that the USB-Astrometa-DVB-T2-C-DAB has 2 switchable front ends. This is not an isuue on windows PC'c which was the intended use of the USb tuner.
@Athoik made a small enigma prestart script
enigma2_pre_start.txt 245bytes 12 downloads change txt to sh
which swaps frontends to support DVB-T2
Xtrend et8000 7.1-Release
2 x 8/1 DiSEqC 30w 13e 19e 23e 28e
Astrometa USB Tuner Working DVB-T2 now on Kernel 4.10+
WD10EARX 1TB
Sandisk 32GB USB for AFB, EPG, Picons & Timeshift
ZGemma Star S 7.0-Release
4/1 DiSEqC 30w 13e 19e 28e
Sandisk 8GB USB for AFB, EPG, Picons & Timeshift
LG 49UH610V UHD-HDR
UHF/Cable/Sat
E-Channelizer
Re: OpenPli 7 news and information #276
Posted 9 December 2018 - 18:25
Ok, so that probably means Enigma detects the stick as DVB-C, and changes the config.
Question is, after a restore and autoinstall, afaik Enigma is restarted, that should also run your script (assuming it is in your backup and restored as well)?
Currently in use: VU+ Duo 4K (2xFBC S2), VU+ Solo 4K (1xFBC S2), uClan Usytm 4K Ultimate (S2+T2), Octagon SF8008 (S2+T2), Zgemma H9.2H (S2+T2)
Due to my bad health, I will not be very active at times and may be slow to respond. I will not read the forum or PM on a regular basis.
Many answers to your question can be found in our new and improved wiki.
Re: OpenPli 7 news and information #277
Posted 9 December 2018 - 18:27
With script disabled
openpli 7.0-rc et8000
et8000 login: root
root@et8000:~# cat /etc/enigma2/settings | grep multiType
config.Nims.2.multiType=1
root@et8000:~#
Script switched off.jpg 123.47KB 6 downloads
Only non DVB-T2 programs available.
This is not a big issue for me, just I don't understand why settings backup is ignore the working settings on my box
PS Script is in the autobackup and gets installed. But because its pre Engma2 it needs a reboot to start.
Edited by ColinB, 9 December 2018 - 18:29.
Xtrend et8000 7.1-Release
2 x 8/1 DiSEqC 30w 13e 19e 23e 28e
Astrometa USB Tuner Working DVB-T2 now on Kernel 4.10+
WD10EARX 1TB
Sandisk 32GB USB for AFB, EPG, Picons & Timeshift
ZGemma Star S 7.0-Release
4/1 DiSEqC 30w 13e 19e 28e
Sandisk 8GB USB for AFB, EPG, Picons & Timeshift
LG 49UH610V UHD-HDR
UHF/Cable/Sat
E-Channelizer
Re: OpenPli 7 news and information #278
Posted 9 December 2018 - 18:32
Xtrend et8000 7.1-Release
2 x 8/1 DiSEqC 30w 13e 19e 23e 28e
Astrometa USB Tuner Working DVB-T2 now on Kernel 4.10+
WD10EARX 1TB
Sandisk 32GB USB for AFB, EPG, Picons & Timeshift
ZGemma Star S 7.0-Release
4/1 DiSEqC 30w 13e 19e 28e
Sandisk 8GB USB for AFB, EPG, Picons & Timeshift
LG 49UH610V UHD-HDR
UHF/Cable/Sat
E-Channelizer
Re: OpenPli 7 news and information #279
Posted 9 December 2018 - 18:49
The script is called by enigma2.sh, so before enigma starts. Which means a reboot isn't needed, an Enigma restart should do the trick too.
I don't think the problem is your settings not being restored, I think the problem is that when Enigma starts, the frontend doesn't report DVB-T support, so enigma changes the restored value to what it does support, which is DVB-C.
Since restoring a config after a flash does a restart of enigma, one to do the the restore of the backup, and one after the autotinstall (afaik). So after the restore restores your script, it should be called, and a restart should not be needed. So if this doesn't happen, this is causing your problem and we need to figure out why.
Currently in use: VU+ Duo 4K (2xFBC S2), VU+ Solo 4K (1xFBC S2), uClan Usytm 4K Ultimate (S2+T2), Octagon SF8008 (S2+T2), Zgemma H9.2H (S2+T2)
Due to my bad health, I will not be very active at times and may be slow to respond. I will not read the forum or PM on a regular basis.
Many answers to your question can be found in our new and improved wiki.
Re: OpenPli 7 news and information #280
1 user(s) are reading this topic
0 members, 1 guests, 0 anonymous users