Jump to content


Photo

OpenPli 7 news and information


  • Please log in to reply
502 replies to this topic

Re: OpenPli 7 news and information #281 ColinB

  • Senior Member
  • 743 posts

+28
Good

Posted 9 December 2018 - 19:35

OK. Changed tuner back to DVB-C , reboot.

 

Manually restore autobackup, it rebooted and it restored tuner setting to DVB-T2.

 

Only question now is why it dosen't do it on fisrt reflash.

 

Many thanks all.


Xtrend et8000 7.1-Release

2 x 8/1 DiSEqC  30w 13e 19e 23e 28e   

Astrometa USB Tuner Working DVB-T2 now on Kernel 4.10+  ;)

WD10EARX 1TB

Sandisk 32GB USB for AFB, EPG, Picons & Timeshift

 

ZGemma Star S 7.0-Release

4/1 DiSEqC  30w 13e 19e 28e

Sandisk 8GB USB for AFB, EPG, Picons & Timeshift

 

LG 49UH610V UHD-HDR

UHF/Cable/Sat

 

E-Channelizer

 

 

 


Re: OpenPli 7 news and information #282 WanWizard

  • PLi® Core member
  • 70,220 posts

+1,798
Excellent

Posted 9 December 2018 - 19:49

The only thing I can think of is that after autoinstalling the drivers for your stick, they still need to be loaded. Which is what the reboot does.

 

So perhaps look for how the drivers are activated, and update the script to do that if not already active?


Currently in use: VU+ Duo 4K (2xFBC S2), VU+ Solo 4K (1xFBC S2), uClan Usytm 4K Ultimate (S2+T2), Octagon SF8008 (S2+T2), Zgemma H9.2H (S2+T2)

Due to my bad health, I will not be very active at times and may be slow to respond. I will not read the forum or PM on a regular basis.

Many answers to your question can be found in our new and improved wiki.


Re: OpenPli 7 news and information #283 zigzag

  • Senior Member
  • 174 posts

0
Neutral

Posted 9 December 2018 - 20:11

Hello, i would like some help with an issue that we have please.

 

After flashing to OpenPli 6.1 then 6.2 and again recently to the new 7.0 test image we continuously have the same issue using

our Xtrend 9200 and watching the IPTV service that we subscribe to.

 

Across all these images whilst watching any channel the video goes from 'normal' to 'slow' then the audio cuts out.

At other times the video continues to play 'normally' but the audio cuts out, and at other times, the video freezes and the audio cuts out too.

 

Then at other times, the picture goes from 'normal' to breaking up and the audio cuts out before the audio restarts then cuts out again.

Finally, at other times, the video 'speeds up'/plays fast but the audio is normal..

 

All these issues happen whilst we are watching any channel and so we are unable to use any of these images.

 

If we revert back to the backed up image we usually use which is OpenPli 4 (17092018) then none of these issues occur and we are able

to watch a stable and problem free video and audio. 

 

Unfortunately, with OpenPli 4 we are unable to update the version of Mediaportal we have installed as it always results in

'mediaportal update failed' 'check the update log carefully' but we can never get it to update!

 

It seems we cannot find a perfect problem-free image to use across any of the OpenPli images and so your help would be

much appreciated in case a solution could be found.

 

Thank you...


Edited by zigzag, 9 December 2018 - 20:13.


Re: OpenPli 7 news and information #284 Jork

  • Senior Member
  • 807 posts

+13
Neutral

Posted 9 December 2018 - 20:58

@ Zigzag,

Replace the four files in the directory root\lib\modules\3.8.7\extra\*.* with the 4 files from the ones below

https://forums.openp...attach_id=97744

Complete restart and test again.

It's the last working driver in relation to iptv and streaming connected media.



Re: OpenPli 7 news and information #285 demosat1

  • Senior Member
  • 367 posts

+6
Neutral

Posted 10 December 2018 - 00:47

Good tips for my ET9200.

Thanks you Jork



Re: OpenPli 7 news and information #286 Bass850

  • Member
  • 7 posts

0
Neutral

Posted 10 December 2018 - 07:30

Hi. Since installing 7.0rc 129 on my duo2 all seems to work fine. Only problem i found is teletext is not working any more. Teletext subs work but i cannot open tuxtxt on channel with text (eg npo1). when i press text button on remite infobar just blinks. no text is shown. i tried deleting conf file in etc dir. it is recreated when text button is pressed. is this a known issue?

Re: OpenPli 7 news and information #287 littlesat

  • PLi® Core member
  • 57,062 posts

+698
Excellent

Posted 10 December 2018 - 07:36

Regarding ET: With the disadvantage that procs will not be responsieve (eg volume)

Edited by littlesat, 10 December 2018 - 07:36.

WaveFrontier 28.2E | 23.5E | 19.2E | 16E | 13E | 10/9E | 7E | 5E | 1W | 4/5W | 15W


Re: OpenPli 7 news and information #288 WanWizard

  • PLi® Core member
  • 70,220 posts

+1,798
Excellent

Posted 10 December 2018 - 12:29

I don't see any problems here, when I press the text button teletekst opens directly.

 

 

I've also tried with text caching disabled, but that also opens directly (and then waits for the appearance of page 100).


Edited by WanWizard, 10 December 2018 - 14:33.
replaced by an English response

Currently in use: VU+ Duo 4K (2xFBC S2), VU+ Solo 4K (1xFBC S2), uClan Usytm 4K Ultimate (S2+T2), Octagon SF8008 (S2+T2), Zgemma H9.2H (S2+T2)

Due to my bad health, I will not be very active at times and may be slow to respond. I will not read the forum or PM on a regular basis.

Many answers to your question can be found in our new and improved wiki.


Re: OpenPli 7 news and information #289 zigzag

  • Senior Member
  • 174 posts

0
Neutral

Posted 10 December 2018 - 13:39

@Jork - your help is much appreciated. I am a little worried that by replacing the 4 files as suggested that

the working OpenPli 4 image will stop working flawlessly as it is the only stable image version that we are

able to use for the IPTV service to work 100% stable.



Re: OpenPli 7 news and information #290 betacentauri

  • PLi® Core member
  • 7,185 posts

+323
Excellent

Posted 10 December 2018 - 17:07

Jorg meant that you should install PLi 6.2 and then replace the 4 files.
Xtrend ET-9200, ET-8000, ET-10000, OpenPliPC on Ubuntu 12.04

Re: OpenPli 7 news and information #291 Raybobo

  • Senior Member
  • 198 posts

+1
Neutral

Posted 10 December 2018 - 17:36

Updated yesterday with v. 7, but the same crash as first. Here under the dmesg result;

 
root@vuduo2:~# dmesg
[VID]: VIDEO_FREEZE 2146360704  0
[VID]: VIDEO_PLAY 2146360704  2 2
[VID]: VIDEO_SLOWMOTION 0    1
[VID]: VIDEO_FAST_FORWARD 0    1
[VID]: VIDEO_CONTINUE 0  1
[AUD]: AUDIO_CONTINUE 0 1 aph=0xce3ed080
[AUD]: Mute : 0
[VID]: VIDEO_GET_SIZE src w: 0 h:0 display w:0 h:0
[VID]: VIDEO_GET_SIZE aspect: 1 0
[VID]: VIDEO_STOP 1  1
[AUD]: AUDIO_STOP -2
[AUD]: AUDIO_CONTINUE -2 0 aph=0x0
[AUD]: AUDIO_CONTINUE aph=0 0 0
[AUD]: AUDIO_SELECT_SOURCE 0
[AUD]: AUDIO_SET_BYPASS_MODE 1
[AUD]: downmix 0 state : 0
[AUD]: AUDIO_PAUSE 1
[AUD]: AUDIO_PLAY 1 decoder start : 0
[VID]: VIDEO_SELECT_SOURCE 0  0
[VID]: VIDEO_SET_STREAMTYPE 0
[VID]: VIDEO_FREEZE 2146355280  0
[VID]: VIDEO_PLAY 2146355280  2 2
[VID]: VIDEO_SLOWMOTION 0    1
[VID]: VIDEO_FAST_FORWARD 0    1
[VID]: VIDEO_CONTINUE 0  1
[AUD]: AUDIO_CONTINUE 0 1 aph=0xcffe3e80
[AUD]: Mute : 0
[VID]: VIDEO_GET_SIZE src w: 0 h:0 display w:0 h:0
[VID]: VIDEO_GET_SIZE aspect: 1 0
[VID]: VIDEO_STOP 1  1
[AUD]: AUDIO_STOP -2
[AUD]: AUDIO_CONTINUE -2 0 aph=0x0
[AUD]: AUDIO_CONTINUE aph=0 0 0
[AUD]: AUDIO_SELECT_SOURCE 0
[AUD]: AUDIO_SET_BYPASS_MODE 1
[AUD]: downmix 0 state : 0
[AUD]: AUDIO_PAUSE 1
[AUD]: AUDIO_PLAY 1 decoder start : 0
[VID]: VIDEO_SELECT_SOURCE 0  0
[VID]: VIDEO_SET_STREAMTYPE 0
[VID]: VIDEO_FREEZE 2146355280  0
[VID]: VIDEO_PLAY 2146355280  2 2
[VID]: VIDEO_SLOWMOTION 0    1
[VID]: VIDEO_FAST_FORWARD 0    1
[VID]: VIDEO_CONTINUE 0  1
[AUD]: AUDIO_CONTINUE 0 1 aph=0xcbabfa80
[AUD]: Mute : 0
[VID]: VIDEO_GET_SIZE src w: 0 h:0 display w:0 h:0
[VID]: VIDEO_GET_SIZE aspect: 1 0
[VID]: VIDEO_STOP 1  1
[AUD]: AUDIO_STOP -2
[AUD]: AUDIO_CONTINUE -2 0 aph=0x0
[AUD]: AUDIO_CONTINUE aph=0 0 0
FE tune
[AUD]: AUDIO_SELECT_SOURCE 0
[AUD]: AUDIO_SET_BYPASS_MODE 0
[AUD]: AC3 downmix 0  state : 0
[AUD]: AUDIO_PAUSE 0
[AUD]: AUDIO_PLAY 0 decoder start : 0
[VID]: VIDEO_SELECT_SOURCE 0  0
[VID]: VIDEO_SET_STREAMTYPE 1
[VID]: VIDEO_FREEZE 2146360704  0
[VID]: VIDEO_PLAY 2146360704  5 2
[VID]: VIDEO_SLOWMOTION 0    1
[VID]: VIDEO_FAST_FORWARD 0    1
[VID]: VIDEO_CONTINUE 0  1
[AUD]: AUDIO_CONTINUE 0 1 aph=0xcbabf580
[AUD]: Mute : 0
[VID]: VIDEO_GET_SIZE src w: 0 h:0 display w:0 h:0
[VID]: VIDEO_GET_SIZE aspect: 1 0
[VID]: VIDEO_STOP 1  1
[AUD]: AUDIO_STOP -2
[AUD]: AUDIO_CONTINUE -2 0 aph=0x0
[AUD]: AUDIO_CONTINUE aph=0 0 0
[AUD]: AUDIO_SELECT_SOURCE 0
[AUD]: AUDIO_SET_BYPASS_MODE 0
[AUD]: AC3 downmix 0  state : 0
[AUD]: AUDIO_PAUSE 0
[AUD]: AUDIO_PLAY 0 decoder start : 0
[VID]: VIDEO_SELECT_SOURCE 0  0
[VID]: VIDEO_SET_STREAMTYPE 1
[VID]: VIDEO_FREEZE 2146355272  0
[VID]: VIDEO_PLAY 2146355272  5 2
[VID]: VIDEO_SLOWMOTION 0    1
[VID]: VIDEO_FAST_FORWARD 0    1
[VID]: VIDEO_CONTINUE 0  1
[AUD]: AUDIO_CONTINUE 0 1 aph=0xce1b6380
[AUD]: Mute : 0
[VID]: VIDEO_GET_SIZE src w: 0 h:0 display w:0 h:0
[VID]: VIDEO_GET_SIZE aspect: 1 0
[VID]: VIDEO_STOP 1  1
[AUD]: AUDIO_STOP -2
[AUD]: AUDIO_CONTINUE -2 0 aph=0x0
[AUD]: AUDIO_CONTINUE aph=0 0 0
[AUD]: AUDIO_SELECT_SOURCE 0
[AUD]: AUDIO_SET_BYPASS_MODE 0
[AUD]: AC3 downmix 0  state : 0
[AUD]: AUDIO_PAUSE 0
[AUD]: AUDIO_PLAY 0 decoder start : 0
[VID]: VIDEO_SELECT_SOURCE 0  0
[VID]: VIDEO_SET_STREAMTYPE 1
[VID]: VIDEO_FREEZE 2146355272  0
[VID]: VIDEO_PLAY 2146355272  5 2
[VID]: VIDEO_SLOWMOTION 0    1
[VID]: VIDEO_FAST_FORWARD 0    1
[VID]: VIDEO_CONTINUE 0  1
[AUD]: AUDIO_CONTINUE 0 1 aph=0xcbafd700
[AUD]: Mute : 0
[VID]: VIDEO_GET_SIZE src w: 0 h:0 display w:0 h:0
[VID]: VIDEO_GET_SIZE aspect: 1 0
[VID]: VIDEO_STOP 1  1
[AUD]: AUDIO_STOP -2
[AUD]: AUDIO_CONTINUE -2 0 aph=0x0
[AUD]: AUDIO_CONTINUE aph=0 0 0
FE tune
[AUD]: AUDIO_SELECT_SOURCE 0
[AUD]: AUDIO_SET_BYPASS_MODE 1
[AUD]: downmix 0 state : 0
[AUD]: AUDIO_PAUSE 1
[AUD]: AUDIO_PLAY 1 decoder start : 0
[VID]: VIDEO_SELECT_SOURCE 0  0
[VID]: VIDEO_SET_STREAMTYPE 0
[VID]: VIDEO_FREEZE 2146360704  0
[VID]: VIDEO_PLAY 2146360704  2 2
[VID]: VIDEO_SLOWMOTION 0    1
[VID]: VIDEO_FAST_FORWARD 0    1
[VID]: VIDEO_CONTINUE 0  1
[AUD]: AUDIO_CONTINUE 0 1 aph=0xce1c1680
[AUD]: Mute : 0
[VID]: VIDEO_GET_SIZE src w: 0 h:0 display w:0 h:0
[VID]: VIDEO_GET_SIZE aspect: 1 0
[VID]: VIDEO_STOP 1  1
[AUD]: AUDIO_STOP -2
[AUD]: AUDIO_CONTINUE -2 0 aph=0x0
[AUD]: AUDIO_CONTINUE aph=0 0 0
FE tune
[AUD]: AUDIO_SELECT_SOURCE 0
[AUD]: AUDIO_SET_BYPASS_MODE 0
[AUD]: AC3 downmix 0  state : 0
[AUD]: AUDIO_PAUSE 0
[AUD]: AUDIO_PLAY 0 decoder start : 0
[VID]: VIDEO_SELECT_SOURCE 0  0
[VID]: VIDEO_SET_STREAMTYPE 1
[VID]: VIDEO_FREEZE 2146360704  0
[VID]: VIDEO_PLAY 2146360704  5 2
[VID]: VIDEO_SLOWMOTION 0    1
[VID]: VIDEO_FAST_FORWARD 0    1
[VID]: VIDEO_CONTINUE 0  1
[AUD]: AUDIO_CONTINUE 0 1 aph=0xcbb47280
[AUD]: Mute : 0
[VID]: VIDEO_GET_SIZE src w: 0 h:0 display w:0 h:0
[VID]: VIDEO_GET_SIZE aspect: 1 0
[VID]: VIDEO_STOP 1  1
[AUD]: AUDIO_STOP -2
[AUD]: AUDIO_CONTINUE -2 0 aph=0x0
[AUD]: AUDIO_CONTINUE aph=0 0 0
[AUD]: AUDIO_SELECT_SOURCE 0
[AUD]: AUDIO_SET_BYPASS_MODE 1
[AUD]: downmix 0 state : 0
[AUD]: AUDIO_PAUSE 1
[AUD]: AUDIO_PLAY 1 decoder start : 0
[VID]: VIDEO_SELECT_SOURCE 0  0
[VID]: VIDEO_SET_STREAMTYPE 1
[VID]: VIDEO_FREEZE 2146355272  0
[VID]: VIDEO_PLAY 2146355272  5 2
[VID]: VIDEO_SLOWMOTION 0    1
[VID]: VIDEO_FAST_FORWARD 0    1
[VID]: VIDEO_CONTINUE 0  1
[AUD]: AUDIO_CONTINUE 0 1 aph=0xcb867180
[AUD]: Mute : 0
[VID]: VIDEO_GET_SIZE src w: 0 h:0 display w:0 h:0
[VID]: VIDEO_GET_SIZE aspect: 1 0
[VID]: VIDEO_STOP 1  1
[AUD]: AUDIO_STOP -2
[AUD]: AUDIO_CONTINUE -2 0 aph=0x0
[AUD]: AUDIO_CONTINUE aph=0 0 0
[AUD]: AUDIO_SELECT_SOURCE 0
[AUD]: AUDIO_SET_BYPASS_MODE 1
[AUD]: downmix 0 state : 0
[AUD]: AUDIO_PAUSE 1
[AUD]: AUDIO_PLAY 1 decoder start : 0
[VID]: VIDEO_SELECT_SOURCE 0  0
[VID]: VIDEO_SET_STREAMTYPE 1
[VID]: VIDEO_FREEZE 2146355272  0
[VID]: VIDEO_PLAY 2146355272  5 2
[VID]: VIDEO_SLOWMOTION 0    1
[VID]: VIDEO_FAST_FORWARD 0    1
[VID]: VIDEO_CONTINUE 0  1
[AUD]: AUDIO_CONTINUE 0 1 aph=0xcbb47180
[AUD]: Mute : 0
[VID]: VIDEO_GET_SIZE src w: 0 h:0 display w:0 h:0
[VID]: VIDEO_GET_SIZE aspect: 1 0
[VID]: VIDEO_STOP 1  1
[AUD]: AUDIO_STOP -2
[AUD]: AUDIO_CONTINUE -2 0 aph=0x0
[AUD]: AUDIO_CONTINUE aph=0 0 0
!!!pes_cb idx<0
[AUD]: AUDIO_SELECT_SOURCE 0
[AUD]: AUDIO_SET_BYPASS_MODE 0
[AUD]: AC3 downmix 0  state : 0
[AUD]: AUDIO_PAUSE 0
[AUD]: AUDIO_PLAY 0 decoder start : 0
[VID]: VIDEO_SELECT_SOURCE 0  0
[VID]: VIDEO_SET_STREAMTYPE 1
[VID]: VIDEO_FREEZE 2146355288  0
[VID]: VIDEO_PLAY 2146355288  5 2
[VID]: VIDEO_SLOWMOTION 0    1
[VID]: VIDEO_FAST_FORWARD 0    1
[VID]: VIDEO_CONTINUE 0  1
[AUD]: AUDIO_CONTINUE 0 1 aph=0xcf457580
[AUD]: Mute : 0
[VID]: VIDEO_GET_SIZE src w: 0 h:0 display w:0 h:0
[VID]: VIDEO_GET_SIZE aspect: 1 0
[VID]: VIDEO_STOP 1  1
[AUD]: AUDIO_STOP -2
[AUD]: AUDIO_CONTINUE -2 0 aph=0x0
[AUD]: AUDIO_CONTINUE aph=0 0 0
[AUD]: AUDIO_SELECT_SOURCE 0
[AUD]: AUDIO_SET_BYPASS_MODE 0
[AUD]: AC3 downmix 0  state : 0
[AUD]: AUDIO_PAUSE 0
[AUD]: AUDIO_PLAY 0 decoder start : 0
[VID]: VIDEO_SELECT_SOURCE 0  0
[VID]: VIDEO_SET_STREAMTYPE 1
[VID]: VIDEO_FREEZE 2146355280  0
[VID]: VIDEO_PLAY 2146355280  5 2
[VID]: VIDEO_SLOWMOTION 0    1
[VID]: VIDEO_FAST_FORWARD 0    1
[VID]: VIDEO_CONTINUE 0  1
[AUD]: AUDIO_CONTINUE 0 1 aph=0xce24f480
[AUD]: Mute : 0
[VID]: VIDEO_GET_SIZE src w: 0 h:0 display w:0 h:0
[VID]: VIDEO_GET_SIZE aspect: 1 0
[VID]: VIDEO_STOP 1  1
[AUD]: AUDIO_STOP -2
[AUD]: AUDIO_CONTINUE -2 0 aph=0x0
[AUD]: AUDIO_CONTINUE aph=0 0 0
FE tune
[AUD]: AUDIO_SELECT_SOURCE 0
[AUD]: AUDIO_SET_BYPASS_MODE 0
[AUD]: AC3 downmix 0  state : 0
[AUD]: AUDIO_PAUSE 0
[AUD]: AUDIO_PLAY 0 decoder start : 0
[VID]: VIDEO_SELECT_SOURCE 0  0
[VID]: VIDEO_SET_STREAMTYPE 1
[VID]: VIDEO_FREEZE 2146360704  0
[VID]: VIDEO_PLAY 2146360704  5 2
[VID]: VIDEO_SLOWMOTION 0    1
[VID]: VIDEO_FAST_FORWARD 0    1
[VID]: VIDEO_CONTINUE 0  1
[AUD]: AUDIO_CONTINUE 0 1 aph=0xce1c5a80
[AUD]: Mute : 0
[VID]: VIDEO_GET_SIZE src w: 0 h:0 display w:0 h:0
[VID]: VIDEO_GET_SIZE aspect: 1 0
[VID]: VIDEO_STOP 1  1
[AUD]: AUDIO_STOP -2
[AUD]: AUDIO_CONTINUE -2 0 aph=0x0
[AUD]: AUDIO_CONTINUE aph=0 0 0
FE tune
[AUD]: AUDIO_SELECT_SOURCE 0
[AUD]: AUDIO_SET_BYPASS_MODE 0
[AUD]: AC3 downmix 0  state : 0
[AUD]: AUDIO_PAUSE 0
[AUD]: AUDIO_PLAY 0 decoder start : 0
[VID]: VIDEO_SELECT_SOURCE 0  0
[VID]: VIDEO_SET_STREAMTYPE 1
[VID]: VIDEO_FREEZE 2146360704  0
[VID]: VIDEO_PLAY 2146360704  5 2
[VID]: VIDEO_SLOWMOTION 0    1
[VID]: VIDEO_FAST_FORWARD 0    1
[VID]: VIDEO_CONTINUE 0  1
[AUD]: AUDIO_CONTINUE 0 1 aph=0xcb863a80
[AUD]: Mute : 0
[VID]: VIDEO_GET_SIZE src w: 0 h:0 display w:0 h:0
[VID]: VIDEO_GET_SIZE aspect: 1 0
[DMX]: paserband_remove_pid pid 0x0 not found
 
[DMX]: paserband_remove_pid pid 0x7bf not found
 
CPU 0 Unable to handle kernel paging request at virtual address 0000003c, epc == e0c5283c, ra == e0c52834
Oops[#1]:
CPU: 0 PID: 543 Comm: enigma2 Tainted: P           O 3.13.5 #1
task: ce454920 ti: ce2a0000 task.ti: ce2a0000
$ 0   : 00000000 10008700 00000000 e0c30000
$ 4   : 00000000 e0f6efa8 00000005 cf1bed00
$ 8   : 00000000 84080008 800df6d4 00000019
$12   : 7feecde8 0074e8f0 0074e8f0 6c44fe70
$16   : 00000000 e1480000 00000200 e13cf204
$20   : ce5c9280 00000200 e0bc0000 e0c60000
$24   : 004a3924 e0cdd1c4
$28   : ce2a0000 ce2a1d50 e0c60000 e0c52834
Hi    : 00001b2d
Lo    : 2d0935b0
epc   : e0c5283c NEXUS_PidChannel_Close_impl+0x34/0x60 [dvb_bcm7424]
    Tainted: P           O
ra    : e0c52834 NEXUS_PidChannel_Close_impl+0x2c/0x60 [dvb_bcm7424]
Status: 10008703        KERNEL EXL IE
Cause : 0080000c
BadVA : 0000003c
PrId  : 00025a11 (Broadcom BMIPS5000)
Modules linked in: ipv6 rt2800usb rt2800lib crc_ccitt rt2x00usb rt2x00lib mac80211 fpga_directc(PO) brcmfb(O) dvb_bcm7424(PO) procmk(O)
Process enigma2 (pid: 543, threadinfo=ce2a0000, task=ce454920, tls=7751ece0)
Stack : cf1bec80 e0cdd1e4 e13cfa64 ce5c9280 e1b3000c e1b298a4 00000000 e0c63838
          00000000 e0cdd1e4 e1b3000c 00000001 00000000 80702080 015a80f8 e0bcd0b8
          cea60920 00000000 00000000 cf797948 598863df 800c2c40 82013500 cea60920
          00000081 80702080 00000001 80670000 80671d18 80730000 cfc20580 8005c1d0
          806fa200 80670000 015a80f8 ce1619f4 ce1619c0 cf797948 00000001 80793340
          ...
Call Trace:
[<e0c5283c>] NEXUS_PidChannel_Close_impl+0x34/0x60 [dvb_bcm7424]
[<e0c63838>] NEXUS_PidChannel_Close+0x28/0x3c [dvb_bcm7424]
[<e0bcd0b8>] bcm7335_demux_release_priv+0x4b8/0x11a8 [dvb_bcm7424]
[<800c2c40>] do_wp_page+0x878/0xd44
[<800c5028>] handle_mm_fault+0x6e4/0xe08
[<80014014>] __do_page_fault+0x354/0x404
[<80006d2c>] work_notifysig+0x10/0x18
 
 
Code: 00808021  02002021  8e27f9e0 <a200003c> 02002821  3c06e0f7  3c19e0c3  8fbf001c  8fb10018
---[ end trace 75b655a6351bd19b ]---
root@vuduo2:~#
 
 
Hope somebody may find a solution, because at least 3 times a day!
Thanks

LG Oled C9

Vu+Duo4KSe

Yamaha 5.1 system

Qnap NAS 2Tb

1 wife

2 childs

2 dogs

4 cats :D


Re: OpenPli 7 news and information #292 WanWizard

  • PLi® Core member
  • 70,220 posts

+1,798
Excellent

Posted 10 December 2018 - 17:39

Driver crash, nothing much we can do about it I'm afraid.


Edited by WanWizard, 11 December 2018 - 10:35.

Currently in use: VU+ Duo 4K (2xFBC S2), VU+ Solo 4K (1xFBC S2), uClan Usytm 4K Ultimate (S2+T2), Octagon SF8008 (S2+T2), Zgemma H9.2H (S2+T2)

Due to my bad health, I will not be very active at times and may be slow to respond. I will not read the forum or PM on a regular basis.

Many answers to your question can be found in our new and improved wiki.


Re: OpenPli 7 news and information #293 Erik Slagter

  • PLi® Core member
  • 46,969 posts

+541
Excellent

Posted 10 December 2018 - 17:57

What brand+model? I've seen this quite a few times on the VU+Duo2 with current drivers.


* Wavefrontier T90 with 28E/23E/19E/13E via SCR switches 2 x 2 x 6 user bands
I don't read PM -> if you have something to ask or to report, do it in the forum so others can benefit. I don't take freelance jobs.
Ik lees geen PM -> als je iets te vragen of te melden hebt, doe het op het forum, zodat anderen er ook wat aan hebben.


Re: OpenPli 7 news and information #294 Raybobo

  • Senior Member
  • 198 posts

+1
Neutral

Posted 10 December 2018 - 18:25

Yes, Duo2

LG Oled C9

Vu+Duo4KSe

Yamaha 5.1 system

Qnap NAS 2Tb

1 wife

2 childs

2 dogs

4 cats :D


Re: OpenPli 7 news and information #295 Raybobo

  • Senior Member
  • 198 posts

+1
Neutral

Posted 10 December 2018 - 19:28

Driver crash, daar kunnen wij vrij weinig aan doen, helaas.

This means that I have to live with crashes ?
And (sorry, don't like it) but is that the same with another image ?

LG Oled C9

Vu+Duo4KSe

Yamaha 5.1 system

Qnap NAS 2Tb

1 wife

2 childs

2 dogs

4 cats :D


Re: OpenPli 7 news and information #296 Erik Slagter

  • PLi® Core member
  • 46,969 posts

+541
Excellent

Posted 10 December 2018 - 19:44

Yes. Only switching back to (any) image that has older drivers may solve your problem.


Edited by Erik Slagter, 10 December 2018 - 19:44.

* Wavefrontier T90 with 28E/23E/19E/13E via SCR switches 2 x 2 x 6 user bands
I don't read PM -> if you have something to ask or to report, do it in the forum so others can benefit. I don't take freelance jobs.
Ik lees geen PM -> als je iets te vragen of te melden hebt, doe het op het forum, zodat anderen er ook wat aan hebben.


Re: OpenPli 7 news and information #297 nor50

  • Senior Member
  • 423 posts

+1
Neutral

Posted 10 December 2018 - 23:17

Driver crash, daar kunnen wij vrij weinig aan doen, helaas.

 

Mod posting in dutch in english forum...?


VU+ Ultimo 4K, 19.2, 13, 4.8 E via switch on input/tuner 1. 1W. Inverto Unicable II LNB IDLU-32UL40 on input/tuner 2. OpenPLi 8.3


Re: OpenPli 7 news and information #298 Raybobo

  • Senior Member
  • 198 posts

+1
Neutral

Posted 11 December 2018 - 06:31

So, again, WHAT IS THE WAY TO MOVE VU+ TO HAVE A CORRECTION ABOUT THIS?

I have send a mail but no answer...

Who will have a contact address for Vu+?


LG Oled C9

Vu+Duo4KSe

Yamaha 5.1 system

Qnap NAS 2Tb

1 wife

2 childs

2 dogs

4 cats :D


Re: OpenPli 7 news and information #299 betacentauri

  • PLi® Core member
  • 7,185 posts

+323
Excellent

Posted 11 December 2018 - 07:16

It’s normal that you don’t get answers from VU.

Erik can also send an email, but still there is no guarantee that they will fix it in short term.
Xtrend ET-9200, ET-8000, ET-10000, OpenPliPC on Ubuntu 12.04

Re: OpenPli 7 news and information #300 Raybobo

  • Senior Member
  • 198 posts

+1
Neutral

Posted 11 December 2018 - 07:27

 

 

It’s normal that you don’t get answers from VU.

Erik can also send an email, but still there is no guarantee that they will fix it in short term. 

Ok, what's the problem with Vu+? They have a page to write about bugs... but if they don't care about it!

 

Yes, please, if Erik has a contact, because as it seems that Duo2 is really sensible to this problem, it need to be fixed by Vu+. That's the only issue I have with this good receiver and as already said, I really want to keep OpenPLI, the best image upon my advice!

 

PS: In the meantime, if I have to rollback to an old version, which one will work without these crashes? Thanks.


Edited by Raybobo, 11 December 2018 - 07:28.

LG Oled C9

Vu+Duo4KSe

Yamaha 5.1 system

Qnap NAS 2Tb

1 wife

2 childs

2 dogs

4 cats :D



2 user(s) are reading this topic

0 members, 2 guests, 0 anonymous users