OK. Changed tuner back to DVB-C , reboot.
Manually restore autobackup, it rebooted and it restored tuner setting to DVB-T2.
Only question now is why it dosen't do it on fisrt reflash.
Many thanks all.
Posted 9 December 2018 - 19:35
OK. Changed tuner back to DVB-C , reboot.
Manually restore autobackup, it rebooted and it restored tuner setting to DVB-T2.
Only question now is why it dosen't do it on fisrt reflash.
Many thanks all.
Xtrend et8000 7.1-Release
2 x 8/1 DiSEqC 30w 13e 19e 23e 28e
Astrometa USB Tuner Working DVB-T2 now on Kernel 4.10+
WD10EARX 1TB
Sandisk 32GB USB for AFB, EPG, Picons & Timeshift
ZGemma Star S 7.0-Release
4/1 DiSEqC 30w 13e 19e 28e
Sandisk 8GB USB for AFB, EPG, Picons & Timeshift
LG 49UH610V UHD-HDR
UHF/Cable/Sat
E-Channelizer
Posted 9 December 2018 - 19:49
The only thing I can think of is that after autoinstalling the drivers for your stick, they still need to be loaded. Which is what the reboot does.
So perhaps look for how the drivers are activated, and update the script to do that if not already active?
Currently in use: VU+ Duo 4K (2xFBC S2), VU+ Solo 4K (1xFBC S2), uClan Usytm 4K Ultimate (S2+T2), Octagon SF8008 (S2+T2), Zgemma H9.2H (S2+T2)
Due to my bad health, I will not be very active at times and may be slow to respond. I will not read the forum or PM on a regular basis.
Many answers to your question can be found in our new and improved wiki.
Posted 9 December 2018 - 20:11
Hello, i would like some help with an issue that we have please.
After flashing to OpenPli 6.1 then 6.2 and again recently to the new 7.0 test image we continuously have the same issue using
our Xtrend 9200 and watching the IPTV service that we subscribe to.
Across all these images whilst watching any channel the video goes from 'normal' to 'slow' then the audio cuts out.
At other times the video continues to play 'normally' but the audio cuts out, and at other times, the video freezes and the audio cuts out too.
Then at other times, the picture goes from 'normal' to breaking up and the audio cuts out before the audio restarts then cuts out again.
Finally, at other times, the video 'speeds up'/plays fast but the audio is normal..
All these issues happen whilst we are watching any channel and so we are unable to use any of these images.
If we revert back to the backed up image we usually use which is OpenPli 4 (17092018) then none of these issues occur and we are able
to watch a stable and problem free video and audio.
Unfortunately, with OpenPli 4 we are unable to update the version of Mediaportal we have installed as it always results in
'mediaportal update failed' 'check the update log carefully' but we can never get it to update!
It seems we cannot find a perfect problem-free image to use across any of the OpenPli images and so your help would be
much appreciated in case a solution could be found.
Thank you...
Edited by zigzag, 9 December 2018 - 20:13.
Posted 9 December 2018 - 20:58
@ Zigzag,
Replace the four files in the directory root\lib\modules\3.8.7\extra\*.* with the 4 files from the ones below
https://forums.openp...attach_id=97744
Complete restart and test again.
It's the last working driver in relation to iptv and streaming connected media.
Posted 10 December 2018 - 07:30
Posted 10 December 2018 - 12:29
I don't see any problems here, when I press the text button teletekst opens directly.
I've also tried with text caching disabled, but that also opens directly (and then waits for the appearance of page 100).
Edited by WanWizard, 10 December 2018 - 14:33.
replaced by an English response
Currently in use: VU+ Duo 4K (2xFBC S2), VU+ Solo 4K (1xFBC S2), uClan Usytm 4K Ultimate (S2+T2), Octagon SF8008 (S2+T2), Zgemma H9.2H (S2+T2)
Due to my bad health, I will not be very active at times and may be slow to respond. I will not read the forum or PM on a regular basis.
Many answers to your question can be found in our new and improved wiki.
Posted 10 December 2018 - 13:39
@Jork - your help is much appreciated. I am a little worried that by replacing the 4 files as suggested that
the working OpenPli 4 image will stop working flawlessly as it is the only stable image version that we are
able to use for the IPTV service to work 100% stable.
Posted 10 December 2018 - 17:36
Updated yesterday with v. 7, but the same crash as first. Here under the dmesg result;
LG Oled C9
Vu+Duo4KSe
Yamaha 5.1 system
Qnap NAS 2Tb
1 wife
2 childs
2 dogs
4 cats
Posted 10 December 2018 - 17:39
Driver crash, nothing much we can do about it I'm afraid.
Edited by WanWizard, 11 December 2018 - 10:35.
Currently in use: VU+ Duo 4K (2xFBC S2), VU+ Solo 4K (1xFBC S2), uClan Usytm 4K Ultimate (S2+T2), Octagon SF8008 (S2+T2), Zgemma H9.2H (S2+T2)
Due to my bad health, I will not be very active at times and may be slow to respond. I will not read the forum or PM on a regular basis.
Many answers to your question can be found in our new and improved wiki.
Posted 10 December 2018 - 17:57
What brand+model? I've seen this quite a few times on the VU+Duo2 with current drivers.
* Wavefrontier T90 with 28E/23E/19E/13E via SCR switches 2 x 2 x 6 user bands
I don't read PM -> if you have something to ask or to report, do it in the forum so others can benefit. I don't take freelance jobs.
Ik lees geen PM -> als je iets te vragen of te melden hebt, doe het op het forum, zodat anderen er ook wat aan hebben.
Posted 10 December 2018 - 19:44
Yes. Only switching back to (any) image that has older drivers may solve your problem.
Edited by Erik Slagter, 10 December 2018 - 19:44.
* Wavefrontier T90 with 28E/23E/19E/13E via SCR switches 2 x 2 x 6 user bands
I don't read PM -> if you have something to ask or to report, do it in the forum so others can benefit. I don't take freelance jobs.
Ik lees geen PM -> als je iets te vragen of te melden hebt, doe het op het forum, zodat anderen er ook wat aan hebben.
Posted 11 December 2018 - 07:27
It’s normal that you don’t get answers from VU.
Erik can also send an email, but still there is no guarantee that they will fix it in short term.
Ok, what's the problem with Vu+? They have a page to write about bugs... but if they don't care about it!
Yes, please, if Erik has a contact, because as it seems that Duo2 is really sensible to this problem, it need to be fixed by Vu+. That's the only issue I have with this good receiver and as already said, I really want to keep OpenPLI, the best image upon my advice!
PS: In the meantime, if I have to rollback to an old version, which one will work without these crashes? Thanks.
Edited by Raybobo, 11 December 2018 - 07:28.
LG Oled C9
Vu+Duo4KSe
Yamaha 5.1 system
Qnap NAS 2Tb
1 wife
2 childs
2 dogs
4 cats
0 members, 9 guests, 0 anonymous users