Posted 1 January 2019 - 14:13
The container and codecs are OK. I see level 5.1 which is in not supported, but it looks, looking at the libx264 encoding options, the level is actually lower than that.
Did you try with OpenPLi 7.0rc? There are newer drivers from VU+, it might help.
Also there may an issue with the file, which I can't see from the output, that the group-of-picture size is too large.
I use OpenPli 7 rc. with different files it happened.
My box is: Vu+ DOU 4k se
Posted 1 January 2019 - 14:20
The container and codecs are OK. I see level 5.1 which is in not supported, but it looks, looking at the libx264 encoding options, the level is actually lower than that.
Did you try with OpenPLi 7.0rc? There are newer drivers from VU+, it might help.
Also there may an issue with the file, which I can't see from the output, that the group-of-picture size is too large.
I use OpenPli 7 rc. with different files it happened.
I use OpenPli 7 rc. with different files it happened.
tonight I will update to 2018-12-31 rc version and let you know the result.
My box is: Vu+ DOU 4k se
Posted 2 January 2019 - 06:06
in 2018-12-31 rc version the problem is solved.
My box is: Vu+ DOU 4k se
Posted 2 January 2019 - 11:08
Thanks for the feedback.
Currently in use: VU+ Duo 4K (2xFBC S2), VU+ Solo 4K (1xFBC S2), uClan Usytm 4K Ultimate (S2+T2), Octagon SF8008 (S2+T2), Zgemma H9.2H (S2+T2)
Due to my bad health, I will not be very active at times and may be slow to respond. I will not read the forum or PM on a regular basis.
Many answers to your question can be found in our new and improved wiki.
Posted 5 January 2019 - 13:58
webm video format still has problem.
My box is: Vu+ DOU 4k se
Posted 5 January 2019 - 14:15
As far as I understand broadcom has dropped support for VP8 / VP9 in their SDK, so it is never going to work again for manufacturers with up to date drivers.
Currently in use: VU+ Duo 4K (2xFBC S2), VU+ Solo 4K (1xFBC S2), uClan Usytm 4K Ultimate (S2+T2), Octagon SF8008 (S2+T2), Zgemma H9.2H (S2+T2)
Due to my bad health, I will not be very active at times and may be slow to respond. I will not read the forum or PM on a regular basis.
Many answers to your question can be found in our new and improved wiki.
Posted 5 January 2019 - 15:20
Posted 5 January 2019 - 16:13
the video run too fast(as if it is fast forwarded), but the audio is normal.so the video and audio don`t match.
yesterday i checked with open esi and in that image "webm" format is ok.
in open atv. open vix. black hole. open black hole. vti and open spa i have check before and they play WEBM files without problems.
Edited by majidnourollahi, 5 January 2019 - 16:18.
My box is: Vu+ DOU 4k se
Posted 5 January 2019 - 17:11
I think they didn’t drop VP9, but I’m not sure.
What means exactly has still problems?
As I understood from VU+, they have.
Currently in use: VU+ Duo 4K (2xFBC S2), VU+ Solo 4K (1xFBC S2), uClan Usytm 4K Ultimate (S2+T2), Octagon SF8008 (S2+T2), Zgemma H9.2H (S2+T2)
Due to my bad health, I will not be very active at times and may be slow to respond. I will not read the forum or PM on a regular basis.
Many answers to your question can be found in our new and improved wiki.
Posted 6 January 2019 - 06:59
I think they didn’t drop VP9, but I’m not sure.
What means exactly has still problems?
As I understood from VU+, they have.
in pli 6.2 also the problem was there. in pli 6.2 just i had audio no video
My box is: Vu+ DOU 4k se
Posted 6 January 2019 - 10:23
There is no problem at all with webm containers.
VU+ drivers have a problem playing VP9 though. Issue has been reported.
* Wavefrontier T90 with 28E/23E/19E/13E via SCR switches 2 x 2 x 6 user bands
I don't read PM -> if you have something to ask or to report, do it in the forum so others can benefit. I don't take freelance jobs.
Ik lees geen PM -> als je iets te vragen of te melden hebt, doe het op het forum, zodat anderen er ook wat aan hebben.
Posted 7 January 2019 - 18:41
Hi All and a Happy New Year.
Just noticed today that "Purge Deleted Bouquets" has gone.
I flashed online 6-1-19 7.0rc today. Using my autobackup
I found that a deleted bouquet kept re appearing after a restart/reboot.
I went back to a backup from 1-1-19 and the same.
Now gone back to 25-12-18 7.0rc updated to 30-12-18 7.0rc "Purge Deleted Bouquets" is back
Edited by ColinB, 7 January 2019 - 18:44.
Xtrend et8000 7.1-Release
2 x 8/1 DiSEqC 30w 13e 19e 23e 28e
Astrometa USB Tuner Working DVB-T2 now on Kernel 4.10+ 
WD10EARX 1TB
Sandisk 32GB USB for AFB, EPG, Picons & Timeshift
ZGemma Star S 7.0-Release
4/1 DiSEqC 30w 13e 19e 28e
Sandisk 8GB USB for AFB, EPG, Picons & Timeshift
LG 49UH610V UHD-HDR
UHF/Cable/Sat
E-Channelizer
Posted 7 January 2019 - 19:23
WaveFrontier 28.2E | 23.5E | 19.2E | 16E | 13E | 10/9E | 7E | 5E | 1W | 4/5W | 15W
Posted 8 January 2019 - 16:44
Then you do not have .del files.... nothing had been changed there in the code post x-mass
Thanks for your confirmation of no changes. All is good now with reflash to latest image.
I suspect my channel list (6 years old, but updated reasonably well) was at fault somewhere.
Of note: Before a manual backup (backupsuite) autubackup (settings) I allways do a reboot to make sure everything (timers, epg, bouquets changes) are all written to flash, then make a manual Autoback.
So when I use online flash, I have allways chose NOT to "Flash with Backup" and let my autobackup kick in.
The error that I had before I had used the "Flash with Backup".
I only mention this as I've not had any issues of this type before.
Cheers Col
Xtrend et8000 7.1-Release
2 x 8/1 DiSEqC 30w 13e 19e 23e 28e
Astrometa USB Tuner Working DVB-T2 now on Kernel 4.10+
WD10EARX 1TB
Sandisk 32GB USB for AFB, EPG, Picons & Timeshift
ZGemma Star S 7.0-Release
4/1 DiSEqC 30w 13e 19e 28e
Sandisk 8GB USB for AFB, EPG, Picons & Timeshift
LG 49UH610V UHD-HDR
UHF/Cable/Sat
E-Channelizer
Posted 12 January 2019 - 21:19
News about release?
VU+ Ultimo 4K, 19.2, 13, 4.8 E via switch on input/tuner 1. 1W. Inverto Unicable II LNB IDLU-32UL40 on input/tuner 2. OpenPLi 8.3
Posted 12 January 2019 - 21:21
Mijn schotel is een T90 met 10 LNB's. Daarnaast voor de fun nog een draaibaar systeem met een Triax TD 78.
Dreamboxen heb ik niet meer echt actief. Verder heb ik ook nog een een VU+ duo2 met 500Gb harddisk + een VU+ Uno, Zero, Solo 4K, Ultimo 4K, Zero 4K, Uno 4Kse. + ook nog een Xtrend ET7x00. Daarnaast heb ik ook nog diverse andere modellen w.o. een Formuler F4, ET8500, ET7500, Mut@nt 2400HD, Xsarius Fusion HD se en verder nog wel het e.e.a. waarmee op verzoek vanalles wordt getest. Iemand moet het tenslotte doen. 
Los van de eerder genoemde modellen heb ik nog wel een rits aan testsamples als Mut@nt 2400HD, HD60, GB UE4K, GB Trio4K, Maxitec Multibox combo en Twin, Octagon sf8008, sf8008 mini en last but nog least enkele modellen van het Grieks Duitse Edision.
Voor centrale opslag van media gebruik ik een Qnap 219P met tweemaal 2 Tb harddisks + een Synology DS414 met 12 Tb Totale opslag.
-------------------------------------------------------------------------------------------
Many answers to your question can be found in our wiki: Just one click away from this "solutioncentre".
Als ik alles al wist hoefde ik ook niets te vragen. If I had all the knowledge I had no questions at all.
Posted 13 January 2019 - 09:18
when I am watching a video file and rewind it with numbers on control, the audio of file is lost. i have to rewind it again to have audio again.it
it happens when downmix to sterio is turned on.
My box is: Vu+ DOU 4k se
Posted 14 January 2019 - 08:39
Congratulations to the openpli team. The 7.0release is now in the downloadarea
Many thank for the hard work
Receiver:2 x Uno4k SE (PLI 7.3 rel), 1 x ET9200 (PLI 4.0), NAS: 2 x QNAP 410, TV: LG 65C8llla, LG 47LB570V, LG 42LM615S, Sound: Yamaha RX-v663, Teufel System 5 THX
Posted 14 January 2019 - 18:28
Congratulations to the openpli team. The 7.0release is now in the downloadarea
Many thank for the hard work
OK, but no upgrade online on receiver yet...?
VU+ Ultimo 4K, 19.2, 13, 4.8 E via switch on input/tuner 1. 1W. Inverto Unicable II LNB IDLU-32UL40 on input/tuner 2. OpenPLi 8.3
Posted 14 January 2019 - 18:33
WaveFrontier 28.2E | 23.5E | 19.2E | 16E | 13E | 10/9E | 7E | 5E | 1W | 4/5W | 15W
0 members, 6 guests, 0 anonymous users
