Posted 12 December 2018 - 15:06
more I'm asking what to do / change to force timeshift to work
as I'm not SME in this matter
so should i change last to be also default ? if all above are default ?
Yes,
If all are default and you can record then timeshift is in the correct place.
FYI. My preference is making a Timeshif folder on USB in my case & a Movie folder on my internal HDD.
Recording Paths.jpg 74.65KB
14 downloads
Timeshift Location.jpg 63.49KB
11 downloads
Xtrend et8000 7.1-Release
2 x 8/1 DiSEqC 30w 13e 19e 23e 28e
Astrometa USB Tuner Working DVB-T2 now on Kernel 4.10+ 
WD10EARX 1TB
Sandisk 32GB USB for AFB, EPG, Picons & Timeshift
ZGemma Star S 7.0-Release
4/1 DiSEqC 30w 13e 19e 28e
Sandisk 8GB USB for AFB, EPG, Picons & Timeshift
LG 49UH610V UHD-HDR
UHF/Cable/Sat
E-Channelizer
Posted 12 December 2018 - 16:58
Posted 12 December 2018 - 18:06
I'm pretty sure the path isn't set to /media/HDD (in capitals) by default, it's there either because you set it, of because your restored a backup which did.
Currently in use: VU+ Duo 4K (2xFBC S2), VU+ Solo 4K (1xFBC S2), uClan Usytm 4K Ultimate (S2+T2), Octagon SF8008 (S2+T2), Zgemma H9.2H (S2+T2)
Due to my bad health, I will not be very active at times and may be slow to respond. I will not read the forum or PM on a regular basis.
Many answers to your question can be found in our new and improved wiki.
Posted 12 December 2018 - 20:58
Posted 12 December 2018 - 21:50
It is being looked at, appearently this is "default and standard behaviour". Imho still wrong if you don't get an error message, it would have saved us all several days...
Currently in use: VU+ Duo 4K (2xFBC S2), VU+ Solo 4K (1xFBC S2), uClan Usytm 4K Ultimate (S2+T2), Octagon SF8008 (S2+T2), Zgemma H9.2H (S2+T2)
Due to my bad health, I will not be very active at times and may be slow to respond. I will not read the forum or PM on a regular basis.
Many answers to your question can be found in our new and improved wiki.
Posted 13 December 2018 - 18:43
Just reporting, 7.0-rc 11-12 (12-12) Zgemma Star-5
No Issues, flashed from OPLi-6.2 online.
Xtrend et8000 7.1-Release
2 x 8/1 DiSEqC 30w 13e 19e 23e 28e
Astrometa USB Tuner Working DVB-T2 now on Kernel 4.10+
WD10EARX 1TB
Sandisk 32GB USB for AFB, EPG, Picons & Timeshift
ZGemma Star S 7.0-Release
4/1 DiSEqC 30w 13e 19e 28e
Sandisk 8GB USB for AFB, EPG, Picons & Timeshift
LG 49UH610V UHD-HDR
UHF/Cable/Sat
E-Channelizer
Posted 15 December 2018 - 08:04
When will be update for bitrate viewer for VU+ZERO 4k?
Posted 15 December 2018 - 11:27
When will be update for bitrate viewer for VU+ZERO 4k?
Probably never, the code has been stable for over 6 years, it reads the demux info from the drivers proc entry, if you don't get any data I assume that fails and VU+ needs to fix the driver.
Currently in use: VU+ Duo 4K (2xFBC S2), VU+ Solo 4K (1xFBC S2), uClan Usytm 4K Ultimate (S2+T2), Octagon SF8008 (S2+T2), Zgemma H9.2H (S2+T2)
Due to my bad health, I will not be very active at times and may be slow to respond. I will not read the forum or PM on a regular basis.
Many answers to your question can be found in our new and improved wiki.
Posted 15 December 2018 - 15:04
On the other side, bitrate viewer plugin is not very stable and tend to stop working by itself (quite often).
NO SUPPORT by PM, it is a forum make your question public so everybody can benefit from the question/answer.
If you think that my answer helps you, you can press the up arrow in bottom right of the answer.
Wanna help with OpenPLi Translation? Please read our Wiki Information for translators
Sat: Hotbird 13.0E, Astra 19.2E, Eutelsat5A 5.0W
VU+ Solo 4K: 2*DVB-S2 + 2*DVB-C/T/T2 (used in DVB-C) & Duo 4K: 2*DVB-S2X + DVB-C (FBC)
AB-Com: PULSe 4K 1*DVB-S2X (+ DVB-C/T/T2)
Edision OS Mio 4K: 1*DVB-S2X + 1*DVB-C/T/T2
Posted 15 December 2018 - 16:54
Opssible to say when final version is out? Days, weeks or months...?
Edited by nor50, 15 December 2018 - 16:54.
VU+ Ultimo 4K, 19.2, 13, 4.8 E via switch on input/tuner 1. 1W. Inverto Unicable II LNB IDLU-32UL40 on input/tuner 2. OpenPLi 8.3
Posted 15 December 2018 - 21:18
I had enough right now this testing version, first after update to latest again plugins won't download automatic and Blind scan plug-in after scanning delete channels from favorite lists and Automatic fullbackup can't restore anything showing that files doesn't exist !!!!! .Back to 6.2 
Edited by ROMAN42, 15 December 2018 - 21:20.
Sony OLED 83' A90J 
Panasonic UHD UB9000 , DENON AVC-A1H, Atmos 7.1.4 , VU+ DUO 4K SE ,VU+ Ultimo 4K Full config, 180 cm Parabolic DISH/ Dual LNB - Full orbit 75E-45W , 80 cm offset dish with unicable LNB for Hot Bird. Humax Icord HD , DUNE HD Max Vision 4K.
Posted 15 December 2018 - 21:20
If you don't report your problems, they can't be fixed.
Currently in use: VU+ Duo 4K (2xFBC S2), VU+ Solo 4K (1xFBC S2), uClan Usytm 4K Ultimate (S2+T2), Octagon SF8008 (S2+T2), Zgemma H9.2H (S2+T2)
Due to my bad health, I will not be very active at times and may be slow to respond. I will not read the forum or PM on a regular basis.
Many answers to your question can be found in our new and improved wiki.
Posted 15 December 2018 - 21:23
Opssible to say when final version is out? Days, weeks or months...?
When the remaining bugs are fixed. Which is hopefully not months.
Currently in use: VU+ Duo 4K (2xFBC S2), VU+ Solo 4K (1xFBC S2), uClan Usytm 4K Ultimate (S2+T2), Octagon SF8008 (S2+T2), Zgemma H9.2H (S2+T2)
Due to my bad health, I will not be very active at times and may be slow to respond. I will not read the forum or PM on a regular basis.
Many answers to your question can be found in our new and improved wiki.
Posted 16 December 2018 - 06:53
video files with "webm" format have problem when playing.
will it be solved in final version?
My box is: Vu+ DOU 4k se
Posted 16 December 2018 - 09:55
Webm files have mostly the VP8 or VP9 codecs in them. Most STB's can't play these codecs. It has nothing to do with the OpenPLi version.
* Wavefrontier T90 with 28E/23E/19E/13E via SCR switches 2 x 2 x 6 user bands
I don't read PM -> if you have something to ask or to report, do it in the forum so others can benefit. I don't take freelance jobs.
Ik lees geen PM -> als je iets te vragen of te melden hebt, doe het op het forum, zodat anderen er ook wat aan hebben.
Posted 16 December 2018 - 10:13
Webm files have mostly the VP8 or VP9 codecs in them. Most STB's can't play these codecs. It has nothing to do with the OpenPLi version.
but in vti and openatv or other images I had no problem to play them.
in pli 6.2 when I played them, I had just the sound and no video. in pli 7 i have video and sound but the video runs faster and they dont match.
My box is: Vu+ DOU 4k se
Posted 16 December 2018 - 12:16
Which vendor/model? It might be an incomplete gstreamer config line in one of the bsp's (which the vendor needs to change).
* Wavefrontier T90 with 28E/23E/19E/13E via SCR switches 2 x 2 x 6 user bands
I don't read PM -> if you have something to ask or to report, do it in the forum so others can benefit. I don't take freelance jobs.
Ik lees geen PM -> als je iets te vragen of te melden hebt, doe het op het forum, zodat anderen er ook wat aan hebben.
Posted 16 December 2018 - 18:22
Posted 17 December 2018 - 06:39
another problem:
when in video file playing setting " behaviour when a file reaches to end " , I put it to "continious play next file (loop) " it plays the next file automatically. but after restarting the box the setting resets to default " return to play list".
there is not any option to not resume a played video file ? i want to play a played file from begining. but it resumes.
My box is: Vu+ DOU 4k se
Posted 17 December 2018 - 08:00
WaveFrontier 28.2E | 23.5E | 19.2E | 16E | 13E | 10/9E | 7E | 5E | 1W | 4/5W | 15W
0 members, 5 guests, 0 anonymous users
