Jump to content


Photo

descrambling http/IPTV stream

descrambleip streams http stream

  • Please log in to reply
4 replies to this topic

#1 Mat-ka

  • New Member
  • 2 posts

0
Neutral

Posted 30 November 2018 - 12:03

Hi,

I would like to know how to descramble ip stream. I use Vu+ Solo4K with OpenPLi 4 (2018-01-16-release-4) with following setting:

Including EIT in http streams enabled,

Including AIT in http streams enabled,
Including ECM in http streams enabled,
Descramble outgoing http streams enabled,
Descramble incomming http streams enabled,
 
I use udpxy a successfully play all FTA=non scrambled udp streams as http://127.0.0.1:402.../239.x.x.x:1234
 
But I need to play scrambled streams! I have proper smartcard in card reader or in CAM. This smartcard is able to descramble the channel from SAT tuner but I´m not able to descramble the same channel that is transparently converted from SAT to IP stream.
 
I tried to find some information but no success. Somebody is talking about driver update, somebody is talking that some receivers are not able to descramble ip stream.
Thank you


Re: descrambling http/IPTV stream #2 Dexterab

  • New Member
  • 1 posts

0
Neutral

Posted 8 January 2019 - 17:33

HI 

 

If you using paired  card with Ci module  you wont be able  to descramble on streams.

 

If it is  just a card   u need  use   oscam  software  first    do  descramble   your card  if possible



Re: descrambling http/IPTV stream #3 Erik Slagter

  • PLi® Core member
  • 44,821 posts

+489
Excellent

Posted 8 January 2019 - 19:43

If you change the first number in the serviceref from 1 to 257 (add 256), the stream will be run through the descrambler. But beware, this may not work on all models and if the stream is of "4096" type (or higher), it also won't work.


Edited by Erik Slagter, 8 January 2019 - 19:43.

* Wavefrontier T90 with 28E/23E/19E/13E/9E/4.8E/0.8W/5W via SCR switches 2 x 2 x 6 user bands
* Ziggo digital cable TV (FTA)
I don't read PM -> if you have something to ask or to report, do it in the forum so others can benefit. I don't take freelance jobs.
Ik lees geen PM -> als je iets te vragen of te melden hebt, doe het op het forum, zodat anderen er ook wat aan hebben.

Re: descrambling http/IPTV stream #4 Mat-ka

  • New Member
  • 2 posts

0
Neutral

Posted 10 January 2019 - 14:28

Hi, thank you for your reply.

I don´t use paired card with CAM.

I use oscam and CAM but no success.

I tried to change the serviceref from 1 to 257 but still doesn´t help.



Re: descrambling http/IPTV stream #5 Erik Slagter

  • PLi® Core member
  • 44,821 posts

+489
Excellent

Posted 10 January 2019 - 17:44

Check the logging of your softcam. I may be that the ECMs cannot be resolved by the card (incorrect system/CA, unsubscribed service, etc) Or your STB can't pass a stream through the descrambler, that is also very well possible.


* Wavefrontier T90 with 28E/23E/19E/13E/9E/4.8E/0.8W/5W via SCR switches 2 x 2 x 6 user bands
* Ziggo digital cable TV (FTA)
I don't read PM -> if you have something to ask or to report, do it in the forum so others can benefit. I don't take freelance jobs.
Ik lees geen PM -> als je iets te vragen of te melden hebt, doe het op het forum, zodat anderen er ook wat aan hebben.




0 user(s) are reading this topic

0 members, 0 guests, 0 anonymous users