How do i save this file on telnet when i do the commands?, i have done this long time ago do not remember now?
ColinB you are using the Zgemma USB WiFi Original, mine is generic no brand RT5370.
RT5370 USB Wireless
Started by Search40, 03 Dec 2018 22:28
74 replies to this topic
Re: RT5370 USB Wireless #22
-
- PLi® Core member
- 68,544 posts
+1,737
Excellent
Posted 11 December 2018 - 12:28
That depends on the telnet client. If you use Windows, I suggest you install PuTTY, which as an option to log the session to a file.
Currently in use: VU+ Duo 4K (2xFBC S2), VU+ Solo 4K (1xFBC S2), uClan Usytm 4K Pro (S2+T2), Octagon SF8008 (S2+T2), Zgemma H9.2H (S2+T2)
Due to my bad health, I will not be very active at times and may be slow to respond. I will not read the forum or PM on a regular basis.
Many answers to your question can be found in our new and improved wiki.
Re: RT5370 USB Wireless #23
-
- Senior Member
- 743 posts
+28
Good
Posted 11 December 2018 - 12:30
How do i save this file on telnet when i do the commands?, i have done this long time ago do not remember now?
ColinB you are using the Zgemma USB WiFi Original, mine is generic no brand RT5370.
It is just a generic one like in the ebay picture. I dont have access to it at the moment so cant check the chipset.
I can tell you, I tried the small square type and couldn't get it to work with Zgemma, but it worked on my xtrend et8000.
PS Spoke to soon. Here it is
root@h3:~# lsmod
Module Size Used by
ipv6 416835 42
rt2800usb 17859 0
rt2800lib 79554 1 rt2800usb
rt2x00usb 10585 1 rt2800usb
rt2x00lib 43400 3 rt2800lib,rt2800usb,rt2x00usb
mac80211 416893 3 rt2800lib,rt2x00lib,rt2x00usb
Edited by ColinB, 11 December 2018 - 12:35.
Xtrend et8000 7.1-Release
2 x 8/1 DiSEqC 30w 13e 19e 23e 28e
Astrometa USB Tuner Working DVB-T2 now on Kernel 4.10+ 
WD10EARX 1TB
Sandisk 32GB USB for AFB, EPG, Picons & Timeshift
ZGemma Star S 7.0-Release
4/1 DiSEqC 30w 13e 19e 28e
Sandisk 8GB USB for AFB, EPG, Picons & Timeshift
LG 49UH610V UHD-HDR
UHF/Cable/Sat
E-Channelizer
Re: RT5370 USB Wireless #24
-
- Senior Member
- 81 posts
0
Neutral
Posted 11 December 2018 - 12:46
I use putty and others, ok on putty how do i save the log file then.
ColinB yours is Zgemma the one in the picture, i know that 100%, the other you say do not know, mine is this one:
https://www.ebay.com...353.m2749.l2649
Re: RT5370 USB Wireless #25
-
- Senior Member
- 743 posts
+28
Good
Posted 11 December 2018 - 12:52
Yes, thats the type I couldn't get to work on Zgemma, but works on Xtrend
Xtrend et8000 7.1-Release
2 x 8/1 DiSEqC 30w 13e 19e 23e 28e
Astrometa USB Tuner Working DVB-T2 now on Kernel 4.10+
WD10EARX 1TB
Sandisk 32GB USB for AFB, EPG, Picons & Timeshift
ZGemma Star S 7.0-Release
4/1 DiSEqC 30w 13e 19e 28e
Sandisk 8GB USB for AFB, EPG, Picons & Timeshift
LG 49UH610V UHD-HDR
UHF/Cable/Sat
E-Channelizer
Re: RT5370 USB Wireless #26
-
- Senior Member
- 81 posts
0
Neutral
Posted 11 December 2018 - 12:59
I did something last night it was very late, this was saved on var/log, i think is the dmesg -c command, please check and let me know if is that?
Here it is:
[ 0.000000] Linux version 4.10.12 (oe-user@oe-host) (gcc version 6.3.0 (GCC) ) #1 SMP Sun Nov 25 16:37:04 CET 2018 [ 0.000000] Fetching vars from bootloader... found 11 vars. [ 0.000000] Options: moca=0 sata=1 pcie=0 usb=1 [ 0.000000] Using 512 MB + 0 MB RAM (from CFE) [ 0.000000] CPU0 revision is: 0002a065 (Broadcom BMIPS4380) [ 0.000000] FPU revision is: 00130001 [ 0.000000] Determined physical RAM map: [ 0.000000] memory: 10000000 @ 00000000 (usable) [ 0.000000] memory: 10000000 @ 20000000 (usable) [ 0.000000] bmem: adding 54 MB LINUX region at 9 MB (0x03617000@0x009e9000) [ 0.000000] bmem: adding 192 MB RESERVED region at 64 MB (0x0c000000@0x04000000) [ 0.000000] bmem: adding 256 MB LINUX region at 512 MB (0x10000000@0x20000000) [ 0.000000] Primary instruction cache 32kB, VIPT, 2-way, linesize 64 bytes. [ 0.000000] Primary data cache 64kB, 4-way, VIPT, cache aliases, linesize 64 bytes [ 0.000000] Zone ranges: [ 0.000000] Normal [mem 0x0000000000000000-0x000000002fffffff] [ 0.000000] Movable zone start for each node [ 0.000000] Early memory node ranges [ 0.000000] node 0: [mem 0x0000000000000000-0x000000000fffffff] [ 0.000000] node 0: [mem 0x0000000020000000-0x000000002fffffff] [ 0.000000] Initmem setup node 0 [mem 0x0000000000000000-0x000000002fffffff] [ 0.000000] On node 0 totalpages: 131072 [ 0.000000] Normal zone: 1152 pages used for memmap [ 0.000000] Normal zone: 0 pages reserved [ 0.000000] Normal zone: 131072 pages, LIFO batch:31 [ 0.000000] percpu: Embedded 13 pages/cpu @81484000 s22608 r8192 d22448 u53248 [ 0.000000] pcpu-alloc: s22608 r8192 d22448 u53248 alloc=13*4096 [ 0.000000] pcpu-alloc: [0] 0 [0] 1 [ 0.000000] Built 1 zonelists in Zone order, mobility grouping on. Total pages: 129920 [ 0.000000] Kernel command line: ubi.mtd=rootfs rootfstype=ubifs root=ubi0:rootfs bmem=192M@64M console=null [ 0.000000] PID hash table entries: 2048 (order: 1, 8192 bytes) [ 0.000000] Dentry cache hash table entries: 65536 (order: 6, 262144 bytes) [ 0.000000] Inode-cache hash table entries: 32768 (order: 5, 131072 bytes) [ 0.000000] Memory: 312404K/524288K available (7831K kernel code, 379K rwdata, 1492K rodata, 268K init, 162K bss, 211884K reserved, 0K cma-reserved) [ 0.000000] Hierarchical RCU implementation. [ 0.000000] Build-time adjustment of leaf fanout to 32. [ 0.000000] NR_IRQS:160 [ 0.000000] Measuring MIPS counter frequency... [ 0.000000] Detected MIPS clock frequency: 751 MHz (375.764 MHz counter) [ 0.000000] clocksource: wktmr: mask: 0xffffffffffffffff max_cycles: 0x63a1e71a3, max_idle_ns: 440795203123 ns [ 0.000000] sched_clock: 32 bits at 1kHz, resolution 1000000ns, wraps every 2147483647500000ns [ 0.000000] Console: colour dummy device 80x25 [ 0.008000] Calibrating delay loop... 749.56 BogoMIPS (lpj=374784) [ 0.009000] pid_max: default: 32768 minimum: 301 [ 0.009000] Mount-cache hash table entries: 1024 (order: 0, 4096 bytes) [ 0.009000] Mountpoint-cache hash table entries: 1024 (order: 0, 4096 bytes) [ 0.010000] smp: Bringing up secondary CPUs ... [ 0.011000] SMP: Booting CPU1... [ 0.015000] Primary instruction cache 32kB, VIPT, 2-way, linesize 64 bytes. [ 0.015000] Primary data cache 64kB, 4-way, VIPT, cache aliases, linesize 64 bytes [ 0.015000] CPU1 revision is: 0002a065 (Broadcom BMIPS4380) [ 0.015000] FPU revision is: 00130001 [ 0.024000] SMP: CPU1 is running [ 0.024000] smp: Brought up 1 node, 2 CPUs [ 0.024000] devtmpfs: initialized [ 0.027000] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 1911260446275000 ns [ 0.027000] futex hash table entries: 512 (order: 3, 32768 bytes) [ 0.028000] NET: Registered protocol family 16 [ 0.043000] USB0: power enable is active low; overcurrent is active low [ 0.053000] SCSI subsystem initialized [ 0.053000] libata version 3.00 loaded. [ 0.053000] usbcore: registered new interface driver usbfs [ 0.053000] usbcore: registered new interface driver hub [ 0.053000] usbcore: registered new device driver usb [ 0.053000] Linux cec interface: v0.10 [ 0.053000] Linux video capture interface: v2.00 [ 0.054000] Advanced Linux Sound Architecture Driver Initialized. [ 0.054000] Bluetooth: Core ver 2.22 [ 0.054000] NET: Registered protocol family 31 [ 0.054000] Bluetooth: HCI device and connection manager initialized [ 0.054000] Bluetooth: HCI socket layer initialized [ 0.054000] Bluetooth: L2CAP socket layer initialized [ 0.054000] Bluetooth: SCO socket layer initialized [ 0.055000] clocksource: Switched to clocksource wktmr [ 0.055000] FS-Cache: Loaded [ 0.062000] random: fast init done [ 0.065000] NET: Registered protocol family 2 [ 0.065000] TCP established hash table entries: 4096 (order: 2, 16384 bytes) [ 0.065000] TCP bind hash table entries: 4096 (order: 3, 32768 bytes) [ 0.065000] TCP: Hash tables configured (established 4096 bind 4096) [ 0.066000] UDP hash table entries: 256 (order: 1, 8192 bytes) [ 0.066000] UDP-Lite hash table entries: 256 (order: 1, 8192 bytes) [ 0.066000] NET: Registered protocol family 1 [ 0.066000] RPC: Registered named UNIX socket transport module. [ 0.066000] RPC: Registered udp transport module. [ 0.066000] RPC: Registered tcp transport module. [ 0.066000] RPC: Registered tcp NFSv4.1 backchannel transport module. [ 0.068000] workingset: timestamp_bits=14 max_order=17 bucket_order=3 [ 0.069000] NFS: Registering the id_resolver key type [ 0.069000] Key type id_resolver registered [ 0.069000] Key type id_legacy registered [ 0.069000] nfs4filelayout_init: NFSv4 File Layout Driver Registering... [ 0.070000] fuse init (API version 7.26) [ 0.077000] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 253) [ 0.077000] io scheduler noop registered [ 0.077000] io scheduler cfq registered (default) [ 0.077000] Serial: 8250/16550 driver, 4 ports, IRQ sharing disabled [ 0.079000] serial8250.0: ttyS0 at MMIO 0x10406800 (irq = 62, base_baud = 5062500) is a 16550A [ 0.079000] serial8250.0: ttyS1 at MMIO 0x10406840 (irq = 63, base_baud = 5062500) is a 16550A [ 0.079000] serial8250.0: ttyS2 at MMIO 0x10406880 (irq = 64, base_baud = 5062500) is a 16550A [ 0.088000] loop: module loaded [ 0.088000] ahci ahci.0: SSS flag set, parallel bus scan disabled [ 0.098000] ahci ahci.0: AHCI 0001.0300 32 slots 2 ports 6 Gbps 0x3 impl platform mode [ 0.098000] ahci ahci.0: flags: ncq sntf stag clo slum part [ 0.103000] scsi host0: ahci [ 0.104000] scsi host1: ahci [ 0.104000] ata1: SATA max UDMA/133 mmio [mem 0x10181000-0x10190fff] port 0x100 irq 87 [ 0.104000] ata2: SATA max UDMA/133 mmio [mem 0x10181000-0x10190fff] port 0x180 irq 87 [ 0.104000] brcmstb_nand: NAND controller driver is loaded [ 0.105000] libphy: Fixed MDIO Bus: probed [ 0.105000] __clk_enable: network [1] [ 0.105000] __clk_enable: enet [1] [ 0.105000] bcm7552_pm_genet_enable 00 [ 0.105000] bcmgenet bcmgenet.0: GENET 2.0 EPHY: 0x00b0 [ 0.105000] bcmgenet bcmgenet.0: failed to get enet-eee clock [ 0.140000] libphy: bcmgenet MII bus: probed [ 0.140000] __clk_disable: enet [0] [ 0.140000] bcm7552_pm_genet_disable 00 [ 0.140000] __clk_disable: network [0] [ 0.141000] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver [ 0.141000] __clk_enable: usb [1] [ 0.141000] bcm7552_pm_usb_enable 00 [ 0.141000] ehci-brcm ehci-brcm.0: Broadcom STB EHCI [ 0.141000] ehci-brcm ehci-brcm.0: new USB bus registered, assigned bus number 1 [ 0.151000] ehci-brcm ehci-brcm.0: irq 66, io mem 0x10480300 [ 0.158000] ehci-brcm ehci-brcm.0: USB 0.0 started, EHCI 1.00 [ 0.158000] hub 1-0:1.0: USB hub found [ 0.158000] hub 1-0:1.0: 2 ports detected [ 0.159000] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver [ 0.159000] ohci-brcm ohci-brcm.0: Broadcom STB OHCI [ 0.159000] ohci-brcm ohci-brcm.0: new USB bus registered, assigned bus number 2 [ 0.159000] ohci-brcm ohci-brcm.0: irq 67, io mem 0x10480400 [ 0.225000] hub 2-0:1.0: USB hub found [ 0.225000] hub 2-0:1.0: 2 ports detected [ 0.226000] usbcore: registered new interface driver usb-storage [ 0.226000] mousedev: PS/2 mouse device common for all mice [ 0.226000] i2c /dev entries driver [ 0.227000] usbcore: registered new interface driver btusb [ 0.227000] sdhci: Secure Digital Host Controller Interface driver [ 0.227000] sdhci: Copyright(c) Pierre Ossman [ 0.227000] sdhci-pltfm: SDHCI platform and OF driver helper [ 0.227000] sdhci-brcmstb sdhci-brcmstb.0: Enabling controller [ 0.228000] mmc0: Failed to set 64-bit DMA mask. [ 0.228000] mmc0: Failed to set 32-bit DMA mask. [ 0.228000] mmc0: No suitable DMA available - falling back to PIO [ 0.261000] mmc0: SDHCI controller on sdhci-brcmstb.0 [sdhci-brcmstb.0] using PIO [ 0.261000] hidraw: raw HID events driver (C) Jiri Kosina [ 0.261000] usbcore: registered new interface driver usbhid [ 0.261000] usbhid: USB HID core driver [ 0.263000] NET: Registered protocol family 17 [ 0.263000] Bluetooth: HIDP (Human Interface Emulation) ver 1.2 [ 0.263000] Bluetooth: HIDP socket layer initialized [ 0.263000] Key type dns_resolver registered [ 0.263000] PM: CP0 COUNT/COMPARE frequency does not depend on divisor [ 0.265000] EBI CS2: setting up NAND flash (primary) [ 0.265000] nand: device found, Manufacturer ID: 0x01, Chip ID: 0xda [ 0.265000] nand: AMD/Spansion S34ML02G1 [ 0.265000] nand: 256 MiB, SLC, erase size: 128 KiB, page size: 2048, OOB size: 64 [ 0.266000] nand: device found, Manufacturer ID: 0x01, Chip ID: 0xda [ 0.266000] nand: AMD/Spansion S34ML02G1 [ 0.266000] nand: 256 MiB, SLC, erase size: 128 KiB, page size: 2048, OOB size: 64 [ 0.266000] brcmnand brcmnand.0: 256MiB total, 128KiB blocks, 2KiB pages, 16B OOB, 8-bit, BCH-4 [ 0.266000] [ 0.266000] Bad block table found at page 131008, version 0x01 [ 0.266000] Bad block table found at page 130944, version 0x01 [ 0.267000] Creating 3 MTD partitions on "brcmnand.0": [ 0.267000] 0x000000000000-0x000010000000 : "complete" [ 0.270000] 0x000000000000-0x000000600000 : "kernel" [ 0.271000] 0x000000600000-0x000010000000 : "rootfs" [ 0.274000] EBI CS0: setting up SPI flash [ 0.274000] brcm_setup_spi_flash: can't locate SPI master [ 0.274000] brcm_setup_cs: can't register SPI flash (error -19) [ 0.274000] ubi0: default fastmap pool size: 100 [ 0.274000] ubi0: default fastmap WL pool size: 50 [ 0.274000] ubi0: attaching mtd2 [ 0.415000] ata1: SATA link down (SStatus 0 SControl 300) [ 0.426000] ubi0: attached by fastmap [ 0.427000] ubi0: fastmap pool size: 100 [ 0.427000] ubi0: fastmap WL pool size: 50 [ 0.439000] ubi0: attached mtd2 (name "rootfs", size 250 MiB) [ 0.439000] ubi0: PEB size: 131072 bytes (128 KiB), LEB size: 126976 bytes [ 0.439000] ubi0: min./max. I/O unit sizes: 2048/2048, sub-page size 2048 [ 0.439000] ubi0: VID header offset: 2048 (aligned 2048), data offset: 4096 [ 0.439000] ubi0: good PEBs: 1996, bad PEBs: 4, corrupted PEBs: 0 [ 0.439000] ubi0: user volume: 1, internal volumes: 1, max. volumes count: 128 [ 0.439000] ubi0: max/mean erase counter: 10/3, WL threshold: 4096, image sequence number: 97831133 [ 0.439000] ubi0: available PEBs: 0, total reserved PEBs: 1996, PEBs reserved for bad PEB handling: 36 [ 0.439000] ubi0: background thread "ubi_bgt0d" started, PID 84 [ 0.439000] ALSA device list: [ 0.439000] No soundcards found. [ 0.439000] Warning: unable to open an initial console. [ 0.472000] usb 1-2: new high-speed USB device number 2 using ehci-brcm [ 0.592000] hub 1-2:1.0: USB hub found [ 0.592000] hub 1-2:1.0: 4 ports detected [ 0.725000] ata2: SATA link down (SStatus 0 SControl 300) [ 0.726000] UBIFS (ubi0:0): background thread "ubifs_bgt0_0" started, PID 85 [ 0.836000] UBIFS (ubi0:0): UBIFS: mounted UBI device 0, volume 0, name "rootfs" [ 0.836000] UBIFS (ubi0:0): LEB size: 126976 bytes (124 KiB), min./max. I/O unit sizes: 2048 bytes/2048 bytes [ 0.836000] UBIFS (ubi0:0): FS size: 246714368 bytes (235 MiB, 1943 LEBs), journal size 9023488 bytes (8 MiB, 72 LEBs) [ 0.836000] UBIFS (ubi0:0): reserved for root: 0 bytes (0 KiB) [ 0.836000] UBIFS (ubi0:0): media format: w4/r0 (latest is w5/r0), UUID 94160F33-5E67-4C08-9329-8811FF165D26, small LPT model [ 0.838000] VFS: Mounted root (ubifs filesystem) on device 0:12. [ 0.840000] devtmpfs: mounted [ 0.840000] Freeing unused kernel memory: 268K [ 0.840000] This architecture does not have kernel memory protection. [ 0.865000] usb 1-2.4: new full-speed USB device number 3 using ehci-brcm [ 1.186000] random: crng init done [ 1.638000] h5_1: loading out-of-tree module taints kernel. [ 1.640000] usbcore: registered new interface driver tpm [ 5.049000] h5: module_layout: kernel tainted. [ 5.049000] Disabling lock debugging due to kernel taint [ 7.671000] 777777777777777777777777777777777777777 [ 8.629000] Console: switching to colour frame buffer device 160x45 [ 8.693000] input: front panel as /devices/virtual/input/input0 [ 8.694000] input: dreambox remote control (native) as /devices/virtual/input/input1 [ 8.695000] input: dreambox advanced remote control (native) as /devices/virtual/input/input2 [ 8.786000] dvbdev: DVB: registering new adapter (dvb0) [ 8.802000] platform dvb0.0: DVB: registering adapter 0 frontend 0 (DVB-S2)... [ 8.803000] platform dvb0.0: DVB: registering adapter 0 frontend 1 (DVB-T/T2/C)... [ 9.209000] input: front panel as /devices/virtual/input/input3 [ 9.231000] Registered IR keymap rc-cec [ 9.232000] input: RC for hdmi_cec as /devices/platform/hdmi.0/rc/rc0/input4 [ 9.233000] rc rc0: RC for hdmi_cec as /devices/platform/hdmi.0/rc/rc0 [ 10.774000] Console: switching to colour dummy device 80x25
Re: RT5370 USB Wireless #27
-
- Senior Member
- 743 posts
+28
Good
Posted 11 December 2018 - 13:02
Xtrend et8000 7.1-Release
2 x 8/1 DiSEqC 30w 13e 19e 23e 28e
Astrometa USB Tuner Working DVB-T2 now on Kernel 4.10+
WD10EARX 1TB
Sandisk 32GB USB for AFB, EPG, Picons & Timeshift
ZGemma Star S 7.0-Release
4/1 DiSEqC 30w 13e 19e 28e
Sandisk 8GB USB for AFB, EPG, Picons & Timeshift
LG 49UH610V UHD-HDR
UHF/Cable/Sat
E-Channelizer
Re: RT5370 USB Wireless #28
-
- PLi® Core member
- 68,544 posts
+1,737
Excellent
Posted 11 December 2018 - 13:03
When did you try?
With 7.0-rc I've united the available drivers as much as possible. The kernel versions f the ET8000 and the Zgemma's are virtually identical (4.10.6 vs 4.10.12).
Currently in use: VU+ Duo 4K (2xFBC S2), VU+ Solo 4K (1xFBC S2), uClan Usytm 4K Pro (S2+T2), Octagon SF8008 (S2+T2), Zgemma H9.2H (S2+T2)
Due to my bad health, I will not be very active at times and may be slow to respond. I will not read the forum or PM on a regular basis.
Many answers to your question can be found in our new and improved wiki.
Re: RT5370 USB Wireless #29
-
- Senior Member
- 743 posts
+28
Good
Posted 11 December 2018 - 13:06
Was early summer 2018. Of course I would have been on 6.2 release
The issue was with the zgemma. Because I got a little hot headed about it at the time. Couldn't understand why it wouldn't work.
Edited by ColinB, 11 December 2018 - 13:08.
Xtrend et8000 7.1-Release
2 x 8/1 DiSEqC 30w 13e 19e 23e 28e
Astrometa USB Tuner Working DVB-T2 now on Kernel 4.10+
WD10EARX 1TB
Sandisk 32GB USB for AFB, EPG, Picons & Timeshift
ZGemma Star S 7.0-Release
4/1 DiSEqC 30w 13e 19e 28e
Sandisk 8GB USB for AFB, EPG, Picons & Timeshift
LG 49UH610V UHD-HDR
UHF/Cable/Sat
E-Channelizer
Re: RT5370 USB Wireless #30
-
- PLi® Core member
- 68,544 posts
+1,737
Excellent
Posted 11 December 2018 - 13:07
I did something last night it was very late, this was saved on var/log, i think is the dmesg -c command, please check and let me know if is that?
Here it is:
You need to follow the sequence I gave you. Switch the box off, disconnect the wifi stick, start the box, login, run a "dmesg -c", plug the wifi stick in, run "dmesg", and post that output.
I need to see if the box detects the stick, and what happens when it does.
Currently in use: VU+ Duo 4K (2xFBC S2), VU+ Solo 4K (1xFBC S2), uClan Usytm 4K Pro (S2+T2), Octagon SF8008 (S2+T2), Zgemma H9.2H (S2+T2)
Due to my bad health, I will not be very active at times and may be slow to respond. I will not read the forum or PM on a regular basis.
Many answers to your question can be found in our new and improved wiki.
Re: RT5370 USB Wireless #31
-
- PLi® Core member
- 68,544 posts
+1,737
Excellent
Posted 11 December 2018 - 13:08
Was early summer 2018
Ok. Should be less of an issue in 7.0.
There are still exceptions, because you can't find a driver source that builds for all different kernel versions in use, but that shouldn't affect your two boxes.
Currently in use: VU+ Duo 4K (2xFBC S2), VU+ Solo 4K (1xFBC S2), uClan Usytm 4K Pro (S2+T2), Octagon SF8008 (S2+T2), Zgemma H9.2H (S2+T2)
Due to my bad health, I will not be very active at times and may be slow to respond. I will not read the forum or PM on a regular basis.
Many answers to your question can be found in our new and improved wiki.
Re: RT5370 USB Wireless #32
-
- Senior Member
- 81 posts
0
Neutral
Posted 11 December 2018 - 13:14
I did that, saved the file
I did something last night it was very late, this was saved on var/log, i think is the dmesg -c command, please check and let me know if is that?
Here it is:
You need to follow the sequence I gave you. Switch the box off, disconnect the wifi stick, start the box, login, run a "dmesg -c", plug the wifi stick in, run "dmesg", and post that output.
I need to see if the box detects the stick, and what happens when it does.
I did that, now is above dmesg -c or just dmesg, can you check?, because last night it was late, and kind of do not remember well what i did?
Re: RT5370 USB Wireless #33
-
- Senior Member
- 743 posts
+28
Good
Posted 11 December 2018 - 13:15
How do i save this file on telnet when i do the commands?,
I'm assuming your using windows.
In your telnet window. After you've ran dmesg. With your mouse highlight all the text you want to copy and right click
Go to where you want to paste the text, click on the space where you want to place the text. The press ctrl and v
Xtrend et8000 7.1-Release
2 x 8/1 DiSEqC 30w 13e 19e 23e 28e
Astrometa USB Tuner Working DVB-T2 now on Kernel 4.10+
WD10EARX 1TB
Sandisk 32GB USB for AFB, EPG, Picons & Timeshift
ZGemma Star S 7.0-Release
4/1 DiSEqC 30w 13e 19e 28e
Sandisk 8GB USB for AFB, EPG, Picons & Timeshift
LG 49UH610V UHD-HDR
UHF/Cable/Sat
E-Channelizer
Re: RT5370 USB Wireless #34
-
- PLi® Core member
- 68,544 posts
+1,737
Excellent
Posted 11 December 2018 - 13:16
The "-c" outputs and clears the buffer, so the next dmesg only shows events from after the clear. The output you posted shows the events from the boot of the box, there is no evidence of connecting a USB device to the box in that log.
Currently in use: VU+ Duo 4K (2xFBC S2), VU+ Solo 4K (1xFBC S2), uClan Usytm 4K Pro (S2+T2), Octagon SF8008 (S2+T2), Zgemma H9.2H (S2+T2)
Due to my bad health, I will not be very active at times and may be slow to respond. I will not read the forum or PM on a regular basis.
Many answers to your question can be found in our new and improved wiki.
Re: RT5370 USB Wireless #35
-
- Senior Member
- 743 posts
+28
Good
Posted 11 December 2018 - 13:26
Just remembered the Zgemma H3 is on 7.0-rc
openpli 7.0-rc h3
h3 login: root
root@h3:~# dmesg
[ 0.000000] Console: colour dummy device 80x25
[ 0.008000] Calibrating delay loop... 749.56 BogoMIPS (lpj=374784)
[ 0.009000] pid_max: default: 32768 minimum: 301
[ 0.009000] Mount-cache hash table entries: 1024 (order: 0, 4096 bytes)
[ 0.009000] Mountpoint-cache hash table entries: 1024 (order: 0, 4096 bytes)
[ 0.010000] smp: Bringing up secondary CPUs ...
[ 0.011000] SMP: Booting CPU1...
[ 0.015000] Primary instruction cache 32kB, VIPT, 2-way, linesize 64 bytes.
[ 0.015000] Primary data cache 64kB, 4-way, VIPT, cache aliases, linesize 64 bytes
[ 0.015000] CPU1 revision is: 0002a065 (Broadcom BMIPS4380)
[ 0.015000] FPU revision is: 00130001
[ 0.024000] SMP: CPU1 is running
[ 0.024000] smp: Brought up 1 node, 2 CPUs
[ 0.024000] devtmpfs: initialized
[ 0.027000] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 1911260446275000 ns
[ 0.027000] futex hash table entries: 512 (order: 3, 32768 bytes)
[ 0.028000] NET: Registered protocol family 16
[ 0.043000] USB0: power enable is active low; overcurrent is active low
[ 0.053000] SCSI subsystem initialized
[ 0.053000] libata version 3.00 loaded.
[ 0.053000] usbcore: registered new interface driver usbfs
[ 0.053000] usbcore: registered new interface driver hub
[ 0.053000] usbcore: registered new device driver usb
[ 0.053000] Linux cec interface: v0.10
[ 0.053000] Linux video capture interface: v2.00
[ 0.054000] Advanced Linux Sound Architecture Driver Initialized.
[ 0.054000] Bluetooth: Core ver 2.22
[ 0.054000] NET: Registered protocol family 31
[ 0.054000] Bluetooth: HCI device and connection manager initialized
[ 0.054000] Bluetooth: HCI socket layer initialized
[ 0.054000] Bluetooth: L2CAP socket layer initialized
[ 0.054000] Bluetooth: SCO socket layer initialized
[ 0.055000] clocksource: Switched to clocksource wktmr
[ 0.055000] FS-Cache: Loaded
[ 0.062000] random: fast init done
[ 0.064000] NET: Registered protocol family 2
[ 0.065000] TCP established hash table entries: 4096 (order: 2, 16384 bytes)
[ 0.065000] TCP bind hash table entries: 4096 (order: 3, 32768 bytes)
[ 0.065000] TCP: Hash tables configured (established 4096 bind 4096)
[ 0.066000] UDP hash table entries: 256 (order: 1, 8192 bytes)
[ 0.066000] UDP-Lite hash table entries: 256 (order: 1, 8192 bytes)
[ 0.066000] NET: Registered protocol family 1
[ 0.066000] RPC: Registered named UNIX socket transport module.
[ 0.066000] RPC: Registered udp transport module.
[ 0.066000] RPC: Registered tcp transport module.
[ 0.066000] RPC: Registered tcp NFSv4.1 backchannel transport module.
[ 0.068000] workingset: timestamp_bits=14 max_order=17 bucket_order=3
[ 0.069000] NFS: Registering the id_resolver key type
[ 0.069000] Key type id_resolver registered
[ 0.069000] Key type id_legacy registered
[ 0.069000] nfs4filelayout_init: NFSv4 File Layout Driver Registering...
[ 0.070000] fuse init (API version 7.26)
[ 0.077000] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 253)
[ 0.077000] io scheduler noop registered
[ 0.077000] io scheduler cfq registered (default)
[ 0.077000] Serial: 8250/16550 driver, 4 ports, IRQ sharing disabled
[ 0.078000] serial8250.0: ttyS0 at MMIO 0x10406800 (irq = 62, base_baud = 5062500) is a 16550A
[ 0.079000] serial8250.0: ttyS1 at MMIO 0x10406840 (irq = 63, base_baud = 5062500) is a 16550A
[ 0.079000] serial8250.0: ttyS2 at MMIO 0x10406880 (irq = 64, base_baud = 5062500) is a 16550A
[ 0.088000] loop: module loaded
[ 0.088000] ahci ahci.0: SSS flag set, parallel bus scan disabled
[ 0.098000] ahci ahci.0: AHCI 0001.0300 32 slots 2 ports 6 Gbps 0x3 impl platform mode
[ 0.098000] ahci ahci.0: flags: ncq sntf stag clo slum part
[ 0.103000] scsi host0: ahci
[ 0.104000] scsi host1: ahci
[ 0.104000] ata1: SATA max UDMA/133 mmio [mem 0x10181000-0x10190fff] port 0x100 irq 87
[ 0.104000] ata2: SATA max UDMA/133 mmio [mem 0x10181000-0x10190fff] port 0x180 irq 87
[ 0.104000] brcmstb_nand: NAND controller driver is loaded
[ 0.105000] libphy: Fixed MDIO Bus: probed
[ 0.105000] __clk_enable: network [1]
[ 0.105000] __clk_enable: enet [1]
[ 0.105000] bcm7552_pm_genet_enable 00
[ 0.105000] bcmgenet bcmgenet.0: GENET 2.0 EPHY: 0x00b0
[ 0.105000] bcmgenet bcmgenet.0: failed to get enet-eee clock
[ 0.140000] libphy: bcmgenet MII bus: probed
[ 0.140000] __clk_disable: enet [0]
[ 0.140000] bcm7552_pm_genet_disable 00
[ 0.140000] __clk_disable: network [0]
[ 0.141000] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
[ 0.141000] __clk_enable: usb [1]
[ 0.141000] bcm7552_pm_usb_enable 00
[ 0.141000] ehci-brcm ehci-brcm.0: Broadcom STB EHCI
[ 0.141000] ehci-brcm ehci-brcm.0: new USB bus registered, assigned bus number 1
[ 0.151000] ehci-brcm ehci-brcm.0: irq 66, io mem 0x10480300
[ 0.158000] ehci-brcm ehci-brcm.0: USB 0.0 started, EHCI 1.00
[ 0.158000] hub 1-0:1.0: USB hub found
[ 0.158000] hub 1-0:1.0: 2 ports detected
[ 0.159000] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
[ 0.159000] ohci-brcm ohci-brcm.0: Broadcom STB OHCI
[ 0.159000] ohci-brcm ohci-brcm.0: new USB bus registered, assigned bus number 2
[ 0.159000] ohci-brcm ohci-brcm.0: irq 67, io mem 0x10480400
[ 0.225000] hub 2-0:1.0: USB hub found
[ 0.225000] hub 2-0:1.0: 2 ports detected
[ 0.226000] usbcore: registered new interface driver usb-storage
[ 0.226000] mousedev: PS/2 mouse device common for all mice
[ 0.226000] i2c /dev entries driver
[ 0.227000] usbcore: registered new interface driver btusb
[ 0.227000] sdhci: Secure Digital Host Controller Interface driver
[ 0.227000] sdhci: Copyright© Pierre Ossman
[ 0.227000] sdhci-pltfm: SDHCI platform and OF driver helper
[ 0.227000] sdhci-brcmstb sdhci-brcmstb.0: Enabling controller
[ 0.228000] mmc0: Failed to set 64-bit DMA mask.
[ 0.228000] mmc0: Failed to set 32-bit DMA mask.
[ 0.228000] mmc0: No suitable DMA available - falling back to PIO
[ 0.261000] mmc0: SDHCI controller on sdhci-brcmstb.0 [sdhci-brcmstb.0] using PIO
[ 0.261000] hidraw: raw HID events driver © Jiri Kosina
[ 0.261000] usbcore: registered new interface driver usbhid
[ 0.261000] usbhid: USB HID core driver
[ 0.263000] NET: Registered protocol family 17
[ 0.263000] Bluetooth: HIDP (Human Interface Emulation) ver 1.2
[ 0.263000] Bluetooth: HIDP socket layer initialized
[ 0.263000] Key type dns_resolver registered
[ 0.263000] PM: CP0 COUNT/COMPARE frequency does not depend on divisor
[ 0.265000] EBI CS2: setting up NAND flash (primary)
[ 0.265000] nand: device found, Manufacturer ID: 0x01, Chip ID: 0xda
[ 0.265000] nand: AMD/Spansion S34ML02G1
[ 0.265000] nand: 256 MiB, SLC, erase size: 128 KiB, page size: 2048, OOB size: 64
[ 0.266000] nand: device found, Manufacturer ID: 0x01, Chip ID: 0xda
[ 0.266000] nand: AMD/Spansion S34ML02G1
[ 0.266000] nand: 256 MiB, SLC, erase size: 128 KiB, page size: 2048, OOB size: 64
[ 0.266000] brcmnand brcmnand.0: 256MiB total, 128KiB blocks, 2KiB pages, 16B OOB, 8-bit, BCH-4
[ 0.266000]
[ 0.266000] Bad block table found at page 131008, version 0x01
[ 0.267000] Bad block table found at page 130944, version 0x01
[ 0.268000] Creating 3 MTD partitions on "brcmnand.0":
[ 0.268000] 0x000000000000-0x000010000000 : "complete"
[ 0.270000] 0x000000000000-0x000000600000 : "kernel"
[ 0.271000] 0x000000600000-0x000010000000 : "rootfs"
[ 0.274000] EBI CS0: setting up SPI flash
[ 0.274000] brcm_setup_spi_flash: can't locate SPI master
[ 0.274000] brcm_setup_cs: can't register SPI flash (error -19)
[ 0.274000] ubi0: default fastmap pool size: 100
[ 0.274000] ubi0: default fastmap WL pool size: 50
[ 0.274000] ubi0: attaching mtd2
[ 0.413000] ata1: SATA link down (SStatus 0 SControl 300)
[ 0.472000] usb 1-1: new high-speed USB device number 2 using ehci-brcm
[ 0.481000] ubi0: attached by fastmap
[ 0.482000] ubi0: fastmap pool size: 100
[ 0.482000] ubi0: fastmap WL pool size: 50
[ 0.494000] ubi0: attached mtd2 (name "rootfs", size 250 MiB)
[ 0.494000] ubi0: PEB size: 131072 bytes (128 KiB), LEB size: 126976 bytes
[ 0.494000] ubi0: min./max. I/O unit sizes: 2048/2048, sub-page size 2048
[ 0.494000] ubi0: VID header offset: 2048 (aligned 2048), data offset: 4096
[ 0.494000] ubi0: good PEBs: 1996, bad PEBs: 4, corrupted PEBs: 0
[ 0.494000] ubi0: user volume: 1, internal volumes: 1, max. volumes count: 128
[ 0.494000] ubi0: max/mean erase counter: 210/72, WL threshold: 4096, image sequence number: 862440369
[ 0.494000] ubi0: available PEBs: 0, total reserved PEBs: 1996, PEBs reserved for bad PEB handling: 36
[ 0.494000] ubi0: background thread "ubi_bgt0d" started, PID 84
[ 0.494000] ALSA device list:
[ 0.494000] No soundcards found.
[ 0.494000] Warning: unable to open an initial console.
[ 0.596000] usb-storage 1-1:1.0: USB Mass Storage device detected
[ 0.597000] scsi host2: usb-storage 1-1:1.0
[ 0.701000] usb 1-2: new high-speed USB device number 3 using ehci-brcm
[ 0.718000] ata2: SATA link down (SStatus 0 SControl 300)
[ 0.719000] UBIFS (ubi0:0): background thread "ubifs_bgt0_0" started, PID 88
[ 0.816000] UBIFS (ubi0:0): UBIFS: mounted UBI device 0, volume 0, name "rootfs"
[ 0.816000] UBIFS (ubi0:0): LEB size: 126976 bytes (124 KiB), min./max. I/O unit sizes: 2048 bytes/2048 bytes
[ 0.816000] UBIFS (ubi0:0): FS size: 246714368 bytes (235 MiB, 1943 LEBs), journal size 9023488 bytes (8 MiB, 72 LEBs
)
[ 0.816000] UBIFS (ubi0:0): reserved for root: 0 bytes (0 KiB)
[ 0.816000] UBIFS (ubi0:0): media format: w4/r0 (latest is w5/r0), UUID 282119E1-FA20-431F-B27A-D4EDD8239B3C, small L
PT model
[ 0.818000] VFS: Mounted root (ubifs filesystem) on device 0:12.
[ 0.821000] hub 1-2:1.0: USB hub found
[ 0.822000] hub 1-2:1.0: 4 ports detected
[ 0.822000] devtmpfs: mounted
[ 0.822000] Freeing unused kernel memory: 268K
[ 0.822000] This architecture does not have kernel memory protection.
[ 1.097000] usb 1-2.2: new high-speed USB device number 4 using ehci-brcm
[ 1.265000] usb 1-2.4: new full-speed USB device number 5 using ehci-brcm
[ 1.545000] random: crng init done
[ 1.568000] h3_1: loading out-of-tree module taints kernel.
[ 1.571000] usbcore: registered new interface driver tpm
[ 1.642000] scsi 2:0:0:0: Direct-Access USB DISK 2.0 PMAP PQ: 0 ANSI: 6
[ 1.644000] sd 2:0:0:0: Attached scsi generic sg0 type 0
[ 2.983000] sd 2:0:0:0: [sda] 60532992 512-byte logical blocks: (31.0 GB/28.9 GiB)
[ 2.984000] sd 2:0:0:0: [sda] Write Protect is off
[ 2.984000] sd 2:0:0:0: [sda] Mode Sense: 23 00 00 00
[ 2.985000] sd 2:0:0:0: [sda] No Caching mode page found
[ 2.985000] sd 2:0:0:0: [sda] Assuming drive cache: write through
[ 2.996000] sda: sda1
[ 3.004000] sd 2:0:0:0: [sda] Attached SCSI removable disk
[ 5.349000] h3: module_layout: kernel tainted.
[ 5.349000] Disabling lock debugging due to kernel taint
[ 5.917000] EXT4-fs (sda1): warning: mounting fs with errors, running e2fsck is recommended
[ 6.744000] EXT4-fs (sda1): mounted filesystem with ordered data mode. Opts: (null)
[ 7.888000] Console: switching to colour frame buffer device 160x45
[ 7.941000] input: front panel as /devices/virtual/input/input0
[ 7.942000] input: dreambox remote control (native) as /devices/virtual/input/input1
[ 7.943000] input: dreambox advanced remote control (native) as /devices/virtual/input/input2
[ 8.037000] dvbdev: DVB: registering new adapter (dvb0)
[ 8.068000] platform dvb0.0: DVB: registering adapter 0 frontend 0 (DVB-S2)...
[ 8.069000] platform dvb0.0: DVB: registering adapter 0 frontend 1 (DVB-T/T2/C)...
[ 8.069000] platform dvb0.0: DVB: registering adapter 0 frontend 2 (DVB-T/T2/C)...
[ 8.457000] input: front panel as /devices/virtual/input/input3
[ 8.485000] Registered IR keymap rc-cec
[ 8.486000] input: RC for hdmi_cec as /devices/platform/hdmi.0/rc/rc0/input4
[ 8.487000] rc rc0: RC for hdmi_cec as /devices/platform/hdmi.0/rc/rc0
[ 9.514000] usb 1-2.2: reset high-speed USB device number 4 using ehci-brcm
[ 9.605000] ieee80211 phy0: rt2x00_set_rt: Info - RT chipset 5390, rev 0502 detected
[ 9.637000] ieee80211 phy0: rt2x00_set_rf: Info - RF chipset 5370 detected
[ 9.639000] ieee80211 phy0: Selected rate control algorithm 'minstrel_ht'
[ 9.641000] usbcore: registered new interface driver rt2800usb
[ 9.772000] Console: switching to colour dummy device 80x25
[ 14.459000] ieee80211 phy0: rt2x00lib_request_firmware: Info - Loading firmware file 'rt2870.bin'
[ 14.465000] ieee80211 phy0: rt2x00lib_request_firmware: Info - Firmware detected - version: 0.36
[ 15.511000] NET: Registered protocol family 10
[ 15.514000] IPv6: ADDRCONF(NETDEV_UP): wlan0: link is not ready
[ 15.515000] Segment Routing with IPv6
[ 16.283000] wlan0: authenticate with 2e:b0:5d:ca:45:68
[ 16.311000] wlan0: send auth to 2e:b0:5d:ca:45:68 (try 1/3)
[ 16.314000] wlan0: authenticated
[ 16.317000] wlan0: associate with 2e:b0:5d:ca:45:68 (try 1/3)
[ 16.321000] wlan0: RX AssocResp from 2e:b0:5d:ca:45:68 (capab=0x411 status=0 aid=1)
[ 16.330000] wlan0: associated
[ 16.330000] IPv6: ADDRCONF(NETDEV_CHANGE): wlan0: link becomes ready
[ 332.768000] EXT4-fs (sda1): error count since last fsck: 754
[ 332.768000] EXT4-fs (sda1): initial error at time 1540126652: ext4_iget:4592: inode 907
[ 332.768000] EXT4-fs (sda1): last error at time 1544386934: ext4_iget:4592: inode 906
root@h3:~#
Xtrend et8000 7.1-Release
2 x 8/1 DiSEqC 30w 13e 19e 23e 28e
Astrometa USB Tuner Working DVB-T2 now on Kernel 4.10+
WD10EARX 1TB
Sandisk 32GB USB for AFB, EPG, Picons & Timeshift
ZGemma Star S 7.0-Release
4/1 DiSEqC 30w 13e 19e 28e
Sandisk 8GB USB for AFB, EPG, Picons & Timeshift
LG 49UH610V UHD-HDR
UHF/Cable/Sat
E-Channelizer
Re: RT5370 USB Wireless #36
-
- Senior Member
- 81 posts
0
Neutral
Posted 11 December 2018 - 13:28
Just checked now above is dmesg -c, and below is dmesg:
[ 0.010000] smp: Bringing up secondary CPUs ...
[ 0.011000] SMP: Booting CPU1...
[ 0.015000] Primary instruction cache 32kB, VIPT, 2-way, linesize 64 bytes.
[ 0.015000] Primary data cache 64kB, 4-way, VIPT, cache aliases, linesize 64 bytes
[ 0.015000] CPU1 revision is: 0002a065 (Broadcom BMIPS4380)
[ 0.015000] FPU revision is: 00130001
[ 0.024000] SMP: CPU1 is running
[ 0.024000] smp: Brought up 1 node, 2 CPUs
[ 0.024000] devtmpfs: initialized
[ 0.027000] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 1911260446275000 ns
[ 0.028000] futex hash table entries: 512 (order: 3, 32768 bytes)
[ 0.028000] NET: Registered protocol family 16
[ 0.043000] USB0: power enable is active low; overcurrent is active low
[ 0.053000] SCSI subsystem initialized
[ 0.053000] libata version 3.00 loaded.
[ 0.053000] usbcore: registered new interface driver usbfs
[ 0.053000] usbcore: registered new interface driver hub
[ 0.053000] usbcore: registered new device driver usb
[ 0.053000] Linux cec interface: v0.10
[ 0.053000] Linux video capture interface: v2.00
[ 0.054000] Advanced Linux Sound Architecture Driver Initialized.
[ 0.054000] Bluetooth: Core ver 2.22
[ 0.054000] NET: Registered protocol family 31
[ 0.054000] Bluetooth: HCI device and connection manager initialized
[ 0.054000] Bluetooth: HCI socket layer initialized
[ 0.054000] Bluetooth: L2CAP socket layer initialized
[ 0.054000] Bluetooth: SCO socket layer initialized
[ 0.055000] clocksource: Switched to clocksource wktmr
[ 0.055000] FS-Cache: Loaded
[ 0.062000] random: fast init done
[ 0.064000] NET: Registered protocol family 2
[ 0.065000] TCP established hash table entries: 4096 (order: 2, 16384 bytes)
[ 0.065000] TCP bind hash table entries: 4096 (order: 3, 32768 bytes)
[ 0.065000] TCP: Hash tables configured (established 4096 bind 4096)
[ 0.066000] UDP hash table entries: 256 (order: 1, 8192 bytes)
[ 0.066000] UDP-Lite hash table entries: 256 (order: 1, 8192 bytes)
[ 0.066000] NET: Registered protocol family 1
[ 0.066000] RPC: Registered named UNIX socket transport module.
[ 0.066000] RPC: Registered udp transport module.
[ 0.066000] RPC: Registered tcp transport module.
[ 0.066000] RPC: Registered tcp NFSv4.1 backchannel transport module.
[ 0.068000] workingset: timestamp_bits=14 max_order=17 bucket_order=3
[ 0.069000] NFS: Registering the id_resolver key type
[ 0.069000] Key type id_resolver registered
[ 0.069000] Key type id_legacy registered
[ 0.069000] nfs4filelayout_init: NFSv4 File Layout Driver Registering...
[ 0.070000] fuse init (API version 7.26)
[ 0.077000] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 253)
[ 0.077000] io scheduler noop registered
[ 0.077000] io scheduler cfq registered (default)
[ 0.077000] Serial: 8250/16550 driver, 4 ports, IRQ sharing disabled
[ 0.079000] serial8250.0: ttyS0 at MMIO 0x10406800 (irq = 62, base_baud = 5062500) is a 16550A
[ 0.079000] serial8250.0: ttyS1 at MMIO 0x10406840 (irq = 63, base_baud = 5062500) is a 16550A
[ 0.079000] serial8250.0: ttyS2 at MMIO 0x10406880 (irq = 64, base_baud = 5062500) is a 16550A
[ 0.088000] loop: module loaded
[ 0.088000] ahci ahci.0: SSS flag set, parallel bus scan disabled
[ 0.098000] ahci ahci.0: AHCI 0001.0300 32 slots 2 ports 6 Gbps 0x3 impl platform mode
[ 0.098000] ahci ahci.0: flags: ncq sntf stag clo slum part
[ 0.103000] scsi host0: ahci
[ 0.104000] scsi host1: ahci
[ 0.104000] ata1: SATA max UDMA/133 mmio [mem 0x10181000-0x10190fff] port 0x100 irq 87
[ 0.104000] ata2: SATA max UDMA/133 mmio [mem 0x10181000-0x10190fff] port 0x180 irq 87
[ 0.104000] brcmstb_nand: NAND controller driver is loaded
[ 0.105000] libphy: Fixed MDIO Bus: probed
[ 0.105000] __clk_enable: network [1]
[ 0.105000] __clk_enable: enet [1]
[ 0.105000] bcm7552_pm_genet_enable 00
[ 0.105000] bcmgenet bcmgenet.0: GENET 2.0 EPHY: 0x00b0
[ 0.105000] bcmgenet bcmgenet.0: failed to get enet-eee clock
[ 0.140000] libphy: bcmgenet MII bus: probed
[ 0.140000] __clk_disable: enet [0]
[ 0.140000] bcm7552_pm_genet_disable 00
[ 0.140000] __clk_disable: network [0]
[ 0.141000] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
[ 0.141000] __clk_enable: usb [1]
[ 0.141000] bcm7552_pm_usb_enable 00
[ 0.141000] ehci-brcm ehci-brcm.0: Broadcom STB EHCI
[ 0.141000] ehci-brcm ehci-brcm.0: new USB bus registered, assigned bus number 1
[ 0.151000] ehci-brcm ehci-brcm.0: irq 66, io mem 0x10480300
[ 0.158000] ehci-brcm ehci-brcm.0: USB 0.0 started, EHCI 1.00
[ 0.158000] hub 1-0:1.0: USB hub found
[ 0.158000] hub 1-0:1.0: 2 ports detected
[ 0.159000] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
[ 0.159000] ohci-brcm ohci-brcm.0: Broadcom STB OHCI
[ 0.159000] ohci-brcm ohci-brcm.0: new USB bus registered, assigned bus number 2
[ 0.159000] ohci-brcm ohci-brcm.0: irq 67, io mem 0x10480400
[ 0.225000] hub 2-0:1.0: USB hub found
[ 0.225000] hub 2-0:1.0: 2 ports detected
[ 0.226000] usbcore: registered new interface driver usb-storage
[ 0.226000] mousedev: PS/2 mouse device common for all mice
[ 0.226000] i2c /dev entries driver
[ 0.227000] usbcore: registered new interface driver btusb
[ 0.227000] sdhci: Secure Digital Host Controller Interface driver
[ 0.227000] sdhci: Copyright© Pierre Ossman
[ 0.227000] sdhci-pltfm: SDHCI platform and OF driver helper
[ 0.227000] sdhci-brcmstb sdhci-brcmstb.0: Enabling controller
[ 0.228000] mmc0: Failed to set 64-bit DMA mask.
[ 0.228000] mmc0: Failed to set 32-bit DMA mask.
[ 0.228000] mmc0: No suitable DMA available - falling back to PIO
[ 0.261000] mmc0: SDHCI controller on sdhci-brcmstb.0 [sdhci-brcmstb.0] using PIO
[ 0.261000] hidraw: raw HID events driver © Jiri Kosina
[ 0.261000] usbcore: registered new interface driver usbhid
[ 0.261000] usbhid: USB HID core driver
[ 0.263000] NET: Registered protocol family 17
[ 0.263000] Bluetooth: HIDP (Human Interface Emulation) ver 1.2
[ 0.263000] Bluetooth: HIDP socket layer initialized
[ 0.263000] Key type dns_resolver registered
[ 0.263000] PM: CP0 COUNT/COMPARE frequency does not depend on divisor
[ 0.265000] EBI CS2: setting up NAND flash (primary)
[ 0.265000] nand: device found, Manufacturer ID: 0x01, Chip ID: 0xda
[ 0.265000] nand: AMD/Spansion S34ML02G1
[ 0.265000] nand: 256 MiB, SLC, erase size: 128 KiB, page size: 2048, OOB size: 64
[ 0.266000] nand: device found, Manufacturer ID: 0x01, Chip ID: 0xda
[ 0.266000] nand: AMD/Spansion S34ML02G1
[ 0.266000] nand: 256 MiB, SLC, erase size: 128 KiB, page size: 2048, OOB size: 64
[ 0.266000] brcmnand brcmnand.0: 256MiB total, 128KiB blocks, 2KiB pages, 16B OOB, 8-bit, BCH-4
[ 0.266000]
[ 0.266000] Bad block table found at page 131008, version 0x01
[ 0.266000] Bad block table found at page 130944, version 0x01
[ 0.267000] Creating 3 MTD partitions on "brcmnand.0":
[ 0.267000] 0x000000000000-0x000010000000 : "complete"
[ 0.270000] 0x000000000000-0x000000600000 : "kernel"
[ 0.271000] 0x000000600000-0x000010000000 : "rootfs"
[ 0.274000] EBI CS0: setting up SPI flash
[ 0.274000] brcm_setup_spi_flash: can't locate SPI master
[ 0.274000] brcm_setup_cs: can't register SPI flash (error -19)
[ 0.274000] ubi0: default fastmap pool size: 100
[ 0.274000] ubi0: default fastmap WL pool size: 50
[ 0.274000] ubi0: attaching mtd2
[ 0.410000] ubi0: attached by fastmap
[ 0.410000] ubi0: fastmap pool size: 100
[ 0.410000] ubi0: fastmap WL pool size: 50
[ 0.414000] ata1: SATA link down (SStatus 0 SControl 300)
[ 0.422000] ubi0: attached mtd2 (name "rootfs", size 250 MiB)
[ 0.422000] ubi0: PEB size: 131072 bytes (128 KiB), LEB size: 126976 bytes
[ 0.422000] ubi0: min./max. I/O unit sizes: 2048/2048, sub-page size 2048
[ 0.422000] ubi0: VID header offset: 2048 (aligned 2048), data offset: 4096
[ 0.422000] ubi0: good PEBs: 1996, bad PEBs: 4, corrupted PEBs: 0
[ 0.422000] ubi0: user volume: 1, internal volumes: 1, max. volumes count: 128
[ 0.422000] ubi0: max/mean erase counter: 10/3, WL threshold: 4096, image sequence number: 97831133
[ 0.422000] ubi0: available PEBs: 0, total reserved PEBs: 1996, PEBs reserved for bad PEB handling: 36
[ 0.422000] ubi0: background thread "ubi_bgt0d" started, PID 84
[ 0.422000] ALSA device list:
[ 0.422000] No soundcards found.
[ 0.423000] Warning: unable to open an initial console.
[ 0.472000] usb 1-2: new high-speed USB device number 2 using ehci-brcm
[ 0.592000] hub 1-2:1.0: USB hub found
[ 0.592000] hub 1-2:1.0: 4 ports detected
[ 0.725000] ata2: SATA link down (SStatus 0 SControl 300)
[ 0.726000] UBIFS (ubi0:0): background thread "ubifs_bgt0_0" started, PID 85
[ 0.771000] UBIFS (ubi0:0): recovery needed
[ 0.865000] usb 1-2.2: new high-speed USB device number 3 using ehci-brcm
[ 1.021000] usb 1-2.4: new full-speed USB device number 4 using ehci-brcm
[ 1.063000] UBIFS (ubi0:0): recovery completed
[ 1.063000] UBIFS (ubi0:0): UBIFS: mounted UBI device 0, volume 0, name "rootfs"
[ 1.063000] UBIFS (ubi0:0): LEB size: 126976 bytes (124 KiB), min./max. I/O unit sizes: 2048 bytes/2048 bytes
[ 1.063000] UBIFS (ubi0:0): FS size: 246714368 bytes (235 MiB, 1943 LEBs), journal size 9023488 bytes (8 MiB, 72 LEBs)
[ 1.063000] UBIFS (ubi0:0): reserved for root: 0 bytes (0 KiB)
[ 1.063000] UBIFS (ubi0:0): media format: w4/r0 (latest is w5/r0), UUID 94160F33-5E67-4C08-9329-8811FF165D26, small LPT model
[ 1.065000] VFS: Mounted root (ubifs filesystem) on device 0:12.
[ 1.066000] devtmpfs: mounted
[ 1.066000] Freeing unused kernel memory: 268K
[ 1.066000] This architecture does not have kernel memory protection.
[ 1.544000] random: crng init done
[ 1.859000] h5_1: loading out-of-tree module taints kernel.
[ 1.861000] usbcore: registered new interface driver tpm
[ 5.306000] h5: module_layout: kernel tainted.
[ 5.306000] Disabling lock debugging due to kernel taint
[ 7.897000] 777777777777777777777777777777777777777
[ 8.852000] Console: switching to colour frame buffer device 160x45
[ 8.917000] input: front panel as /devices/virtual/input/input0
[ 8.918000] input: dreambox remote control (native) as /devices/virtual/input/input1
[ 8.919000] input: dreambox advanced remote control (native) as /devices/virtual/input/input2
[ 9.010000] dvbdev: DVB: registering new adapter (dvb0)
[ 9.039000] platform dvb0.0: DVB: registering adapter 0 frontend 0 (DVB-S2)...
[ 9.040000] platform dvb0.0: DVB: registering adapter 0 frontend 1 (DVB-T/T2/C)...
[ 9.481000] input: front panel as /devices/virtual/input/input3
[ 9.503000] Registered IR keymap rc-cec
[ 9.504000] input: RC for hdmi_cec as /devices/platform/hdmi.0/rc/rc0/input4
[ 9.504000] rc rc0: RC for hdmi_cec as /devices/platform/hdmi.0/rc/rc0
[ 11.078000] usb 1-2.2: reset high-speed USB device number 3 using ehci-brcm
[ 11.162000] mt7601u 1-2.2:1.0: ASIC revision: 76010001 MAC revision: 76010500
[ 11.186000] CPU 0 Unable to handle kernel paging request at virtual address 401a6008, epc == 80448550, ra == 8044852c
[ 11.186000] Oops[#1]:
[ 11.186000] CPU: 0 PID: 271 Comm: modprobe Tainted: GF O 4.10.12 #1
[ 11.186000] task: aee5ad00 task.stack: adff2000
[ 11.186000] $ 0 : 00000000 10008700 035bd024 00010000
[ 11.186000] $ 4 : 00000000 10008701 8045a570 af2d2080
[ 11.186000] $ 8 : 01007640 e1d26164 00005a48 fffffffe
[ 11.186000] $12 : 00005a50 af5de143 00000000 00005a54
[ 11.186000] $16 : 401a6000 af52056c 8045a0e0 8045a570
[ 11.186000] $20 : af520568 af2d2080 10008701 af520420
[ 11.186000] $24 : 00000000 80386230
[ 11.186000] $28 : adff2000 adff3a38 e1d12bfc 8044852c
[ 11.186000] Hi : 0005cc0c
[ 11.186000] Lo : 0002e606
[ 11.186000] epc : 80448550 devres_find+0x68/0x108
[ 11.186000] ra : 8044852c devres_find+0x44/0x108
[ 11.186000] Status: 10008702 KERNEL EXL
[ 11.186000] Cause : 00800008 (ExcCode 02)
[ 11.186000] BadVA : 401a6008
[ 11.186000] PrId : 0002a065 (Broadcom BMIPS4380)
[ 11.186000] Modules linked in: mt7601u(+) mac80211 h5(FO) h5_3(O) h5_2(O) h5_1(O)
[ 11.186000] Process modprobe (pid: 271, threadinfo=adff2000, task=aee5ad00, tls=7717d4a0)
[ 11.186000] Stack : 8088eadc 807e450c af2d2180 801214fc 7fffffff adff3b40 af520420 af558a80
[ 11.186000] af2d2180 80950000 807e450c af2d2080 80460000 8045afac 800957b4 00000007
[ 11.186000] 00000730 808b05b4 7fffffff 00000000 00000001 00000000 0000b164 00000000
[ 11.186000] af2c6f90 00000004 af2d21a0 80930000 7fffffff 00000001 808b050c 809e0000
[ 11.186000] ada6b0a4 00000004 adff3b40 e1d06af0 e1d0656c e1d0b330 e1d13664 af520400
[ 11.186000] ...
[ 11.186000] Call Trace:
[ 11.186000] [<80448550>] devres_find+0x68/0x108
[ 11.186000] [<8045afac>] _request_firmware+0x65c/0x848
[ 11.186000] [<8045b1d8>] request_firmware+0x40/0x60
[ 11.186000] [<e1d09954>] mt7601u_mcu_init+0x9c/0x4e4 [mt7601u]
[ 11.186000] [<e1d073f0>] mt7601u_init_hardware+0x70/0x59c [mt7601u]
[ 11.186000] [<e1d0698c>] mt7601u_probe+0x2a4/0x330 [mt7601u]
[ 11.186000] [<8051a154>] usb_probe_interface+0x150/0x2b4
[ 11.186000] [<80444c94>] driver_probe_device+0x258/0x38c
[ 11.186000] [<80444ea0>] __driver_attach+0xd8/0xe0
[ 11.186000] [<80442ae4>] bus_for_each_dev+0x68/0xb0
[ 11.186000] [<80443fc8>] bus_add_driver+0x124/0x260
[ 11.186000] [<80445974>] driver_register+0x84/0x128
[ 11.186000] [<805184e8>] usb_register_driver+0x80/0x18c
[ 11.186000] [<800015d8>] do_one_initcall+0x44/0x18c
[ 11.186000] [<800cc050>] do_init_module+0x74/0x1d4
[ 11.186000] [<800b3618>] load_module+0x2450/0x26f8
[ 11.186000] [<800b3b4c>] SyS_finit_module+0xc8/0xe8
[ 11.186000] [<80015d64>] syscall_common+0x34/0x58
[ 11.186000] Code: 8e100004 1211001b 02c02825 <8e020008> 1642fffb 26050010 02a03025 12600005 02e02025
[ 11.186000]
[ 11.187000] ---[ end trace ad1e4b616fd48d44 ]---
[ 11.310000] Console: switching to colour dummy device 80x25
Re: RT5370 USB Wireless #37
-
- Senior Member
- 81 posts
0
Neutral
Posted 11 December 2018 - 13:32
I find out now that when you do this commands on putty, the log file is on var/log, i know for the future now, if you think is not correct, i can do again.
Re: RT5370 USB Wireless #38
-
- PLi® Core member
- 68,544 posts
+1,737
Excellent
Posted 11 December 2018 - 13:33
@ColinB,
This is what I want to see:
[ 9.514000] usb 1-2.2: reset high-speed USB device number 4 using ehci-brcm [ 9.605000] ieee80211 phy0: rt2x00_set_rt: Info - RT chipset 5390, rev 0502 detected [ 9.637000] ieee80211 phy0: rt2x00_set_rf: Info - RF chipset 5370 detected [ 9.639000] ieee80211 phy0: Selected rate control algorithm 'minstrel_ht' [ 9.641000] usbcore: registered new interface driver rt2800usb [ 9.772000] Console: switching to colour dummy device 80x25 [ 14.459000] ieee80211 phy0: rt2x00lib_request_firmware: Info - Loading firmware file 'rt2870.bin' [ 14.465000] ieee80211 phy0: rt2x00lib_request_firmware: Info - Firmware detected - version: 0.36
Currently in use: VU+ Duo 4K (2xFBC S2), VU+ Solo 4K (1xFBC S2), uClan Usytm 4K Pro (S2+T2), Octagon SF8008 (S2+T2), Zgemma H9.2H (S2+T2)
Due to my bad health, I will not be very active at times and may be slow to respond. I will not read the forum or PM on a regular basis.
Many answers to your question can be found in our new and improved wiki.
Re: RT5370 USB Wireless #39
-
- PLi® Core member
- 68,544 posts
+1,737
Excellent
Posted 11 December 2018 - 13:34
@Search40,
Your box loads a mediatek driver:
[ 11.078000] usb 1-2.2: reset high-speed USB device number 3 using ehci-brcm [ 11.162000] mt7601u 1-2.2:1.0: ASIC revision: 76010001 MAC revision: 76010500
after which the kernel crashes...
Currently in use: VU+ Duo 4K (2xFBC S2), VU+ Solo 4K (1xFBC S2), uClan Usytm 4K Pro (S2+T2), Octagon SF8008 (S2+T2), Zgemma H9.2H (S2+T2)
Due to my bad health, I will not be very active at times and may be slow to respond. I will not read the forum or PM on a regular basis.
Many answers to your question can be found in our new and improved wiki.
Re: RT5370 USB Wireless #40
-
- Senior Member
- 81 posts
0
Neutral
Posted 11 December 2018 - 13:43
Ah i see, so the Chinese seller has wrong info about this?
0 user(s) are reading this topic
0 members, 0 guests, 0 anonymous users
