Posted 19 January 2019 - 20:07
Hi,
Someone report to me that he uses OpenPLi 7.0 stable from 20190116, turn the box its Zgemma H9S into standby.
Image turned off and no sound.
Go to OpenWebif and zap to a FTA channel for exemple.
You will have no picture on TV but the channel sound will be played.
Can someone else confirm this bug?
Thanks,
Pr2
NO SUPPORT by PM, it is a forum make your question public so everybody can benefit from the question/answer.
If you think that my answer helps you, you can press the up arrow in bottom right of the answer.
Wanna help with OpenPLi Translation? Please read our Wiki Information for translators
Sat: Hotbird 13.0E, Astra 19.2E, Eutelsat5A 5.0W
VU+ Solo 4K: 2*DVB-S2 + 2*DVB-C/T/T2 (used in DVB-C) & Duo 4K: 2*DVB-S2X + DVB-C (FBC)
AB-Com: PULSe 4K 1*DVB-S2X (+ DVB-C/T/T2)
Edision OS Mio 4K: 1*DVB-S2X + 1*DVB-C/T/T2
Posted 19 January 2019 - 21:50
I only have an H9T here, if this is a drivers issue not really relavant I think.
Currently in use: VU+ Duo 4K (2xFBC S2), VU+ Solo 4K (1xFBC S2), uClan Usytm 4K Ultimate (S2+T2), Octagon SF8008 (S2+T2), Zgemma H9.2H (S2+T2)
Due to my bad health, I will not be very active at times and may be slow to respond. I will not read the forum or PM on a regular basis.
Many answers to your question can be found in our new and improved wiki.
Posted 19 January 2019 - 22:34
Confirmed. Tried H9S pluged to PC monitor via HDMI, used fallback tuner. Zgemma to standby => monitor sleeps.
Open Owif, click to any service - monitor wakeup, on screen is "standby screen" with Tuner in use, Current time, Streaming Info and audio is on.
Posted 20 January 2019 - 12:03
Current time, Streaming Info and audio is on
That's truth 
Posted 21 January 2019 - 22:24
Can someone with contact at Zgemma escalate this bug?
NO SUPPORT by PM, it is a forum make your question public so everybody can benefit from the question/answer.
If you think that my answer helps you, you can press the up arrow in bottom right of the answer.
Wanna help with OpenPLi Translation? Please read our Wiki Information for translators
Sat: Hotbird 13.0E, Astra 19.2E, Eutelsat5A 5.0W
VU+ Solo 4K: 2*DVB-S2 + 2*DVB-C/T/T2 (used in DVB-C) & Duo 4K: 2*DVB-S2X + DVB-C (FBC)
AB-Com: PULSe 4K 1*DVB-S2X (+ DVB-C/T/T2)
Edision OS Mio 4K: 1*DVB-S2X + 1*DVB-C/T/T2
Posted 23 January 2019 - 10:56
I will send it to zgemma...
Posted 24 January 2019 - 11:17
Answer from suppot:
We can confirm the issue.
The video encoders are disabled in standby/HDMI shut down.
We will check as the video encoder should been still available for streaming in standby.
Posted 24 January 2019 - 17:00
It looks like this is about streaming, not transcoding, so no encoders are required.
* Wavefrontier T90 with 28E/23E/19E/13E via SCR switches 2 x 2 x 6 user bands
I don't read PM -> if you have something to ask or to report, do it in the forum so others can benefit. I don't take freelance jobs.
Ik lees geen PM -> als je iets te vragen of te melden hebt, doe het op het forum, zodat anderen er ook wat aan hebben.
Posted 24 January 2019 - 22:06
The bug is not while streaming, just zap from the OpenWebif with the box still in standby.
NO SUPPORT by PM, it is a forum make your question public so everybody can benefit from the question/answer.
If you think that my answer helps you, you can press the up arrow in bottom right of the answer.
Wanna help with OpenPLi Translation? Please read our Wiki Information for translators
Sat: Hotbird 13.0E, Astra 19.2E, Eutelsat5A 5.0W
VU+ Solo 4K: 2*DVB-S2 + 2*DVB-C/T/T2 (used in DVB-C) & Duo 4K: 2*DVB-S2X + DVB-C (FBC)
AB-Com: PULSe 4K 1*DVB-S2X (+ DVB-C/T/T2)
Edision OS Mio 4K: 1*DVB-S2X + 1*DVB-C/T/T2
Posted 26 January 2019 - 11:31
WaveFrontier 28.2E | 23.5E | 19.2E | 16E | 13E | 10/9E | 7E | 5E | 1W | 4/5W | 15W
Posted 26 January 2019 - 12:03
Zgemma H9 only
Posted 26 January 2019 - 12:08
The bug is not while streaming, just zap from the OpenWebif with the box still in standby.
Why would you want to do that?
* Wavefrontier T90 with 28E/23E/19E/13E via SCR switches 2 x 2 x 6 user bands
I don't read PM -> if you have something to ask or to report, do it in the forum so others can benefit. I don't take freelance jobs.
Ik lees geen PM -> als je iets te vragen of te melden hebt, doe het op het forum, zodat anderen er ook wat aan hebben.
Posted 26 January 2019 - 12:38
WaveFrontier 28.2E | 23.5E | 19.2E | 16E | 13E | 10/9E | 7E | 5E | 1W | 4/5W | 15W
Posted 26 January 2019 - 12:39
Why do you need it ? F.eg. if you want see fresh EPG in owif for some service (f.eg. you want create timer etc) and box is in standby, then press L mouse on service name. Box zap to wanted service, but does not turning HDMI output.
But H9 turn on TV in this case, displaying "standby screen" and audio (in last volume, as was used) is on whole room... EDIT: audio goes on max in this case on H9 to HDMI!
Btw - why should not zap Owif in standby ? It is Qwif's feature, not bug.
Edited by ims, 26 January 2019 - 12:47.
Posted 26 January 2019 - 12:58
Example for what it is useful and why it is not a bug:
- box in stanby - epg missing on services (picture 1).
- zap to service (in standby) , refresh page in browser and ... 'voila' ... epg exist and can be created timer, readed epg. looking in epg etc (picture 2)
owif_zap1.PNG 4.96KB
1 downloads
owif_zap2.PNG 27.13KB
1 downloads
Posted 26 January 2019 - 13:01
Apologies if I'm getting totally the wrong end of the stick, but timer recordings on my ET10K run in standby, using one or more tuners as and when required.
test
Posted 26 January 2019 - 13:15
NO SUPPORT by PM, it is a forum make your question public so everybody can benefit from the question/answer.
If you think that my answer helps you, you can press the up arrow in bottom right of the answer.
Wanna help with OpenPLi Translation? Please read our Wiki Information for translators
Sat: Hotbird 13.0E, Astra 19.2E, Eutelsat5A 5.0W
VU+ Solo 4K: 2*DVB-S2 + 2*DVB-C/T/T2 (used in DVB-C) & Duo 4K: 2*DVB-S2X + DVB-C (FBC)
AB-Com: PULSe 4K 1*DVB-S2X (+ DVB-C/T/T2)
Edision OS Mio 4K: 1*DVB-S2X + 1*DVB-C/T/T2
Posted 27 January 2019 - 13:39
About OWIF on Zgemma 9, on old look when you goes to check the stream link you only have IP, no channel references etc
When you switch OWIF to new look, it's shows correct.
On Zgemma H3 series on old/default OWIF look its shows correct stream link with channel references without changes to new look.
btw about this OWIF bug on standby, its no matter, just founded and reported
0 members, 1 guests, 0 anonymous users
