Hello! I have a problem updating to openpli 7.0 from openpli 6.2.
I have Cccam working perfectly, but when updating it does not read my card, but Cccam works because I "see" correctly.
My receiver is aVuduo2.
Thank you
Problem with Cccam in openpli 7.0
Started by Asterix, 20 Jan 2019 10:05
15 replies to this topic
Re: Problem with Cccam in openpli 7.0 #2
-
- Senior Member
- 5,519 posts
+115
Excellent
Posted 20 January 2019 - 13:01
CCcam has nit changed for mipsel based boxes. What kind of card are we talking about? Perhaps it needs additional settings in CCcam.cfg to work.
Met één been in het graf..... Helaas
Re: Problem with Cccam in openpli 7.0 #3
-
- Member
- 18 posts
0
Neutral
Posted 21 January 2019 - 18:34
Thanks for the response, but I do not think that's the case, because if it works correctly in Openpli 6.2 and no change in Cccam version, it should work.
My card is "seca", I do not need to put any data in Cccam.cfg. I have been looking at whether there is a possibility to indicate the card holder (the Vuduo2 has two), but I can not find anything.
Regards
Re: Problem with Cccam in openpli 7.0 #4
-
- PLi® Core member
- 70,865 posts
+1,832
Excellent
Posted 21 January 2019 - 19:18
CCcam 2.3.2 has problems reading Seca "Merlin" cards, as used by M7.
It is not related to the image. If you had no problems before, perhaps you were using a different version?
Currently in use: VU+ Duo 4K (2xFBC S2), VU+ Solo 4K (1xFBC S2), uClan Usytm 4K Ultimate (S2+T2), Octagon SF8008 (S2+T2), Zgemma H9.2H (S2+T2)
Due to my bad health, I will not be very active at times and may be slow to respond. I will not read the forum or PM on a regular basis.
Many answers to your question can be found in our new and improved wiki.
Re: Problem with Cccam in openpli 7.0 #5
-
- Member
- 18 posts
0
Neutral
Posted 21 January 2019 - 19:34
Sorry but I do not know if "Merlin" is my card.
It is from the satellite platform of Spain (the "gray").
I do not change the Cccam version, I just update the image and stop reading the card.
Re: Problem with Cccam in openpli 7.0 #6
-
- PLi® Core member
- 70,865 posts
+1,832
Excellent
Posted 21 January 2019 - 19:36
Your cccam.cfg file missing or not restored or incorrect?
Did you check that cccam is really installed (long-press blue button), selected, and running?
Currently in use: VU+ Duo 4K (2xFBC S2), VU+ Solo 4K (1xFBC S2), uClan Usytm 4K Ultimate (S2+T2), Octagon SF8008 (S2+T2), Zgemma H9.2H (S2+T2)
Due to my bad health, I will not be very active at times and may be slow to respond. I will not read the forum or PM on a regular basis.
Many answers to your question can be found in our new and improved wiki.
Re: Problem with Cccam in openpli 7.0 #7
-
- Member
- 18 posts
0
Neutral
Posted 21 January 2019 - 20:19
Cccam works, because "I see" but not through my card.
I have tried saving my Cccam.cfg before updating and restoring it after the update and nothing.
Re: Problem with Cccam in openpli 7.0 #8
-
- Senior Member
- 5,519 posts
+115
Excellent
Posted 21 January 2019 - 20:36
If you can see your channels without your card being read then you are using CardSharing which is not allowed here...
I believe that Spain is using Nagra cards and they require special commands in CCcam.cfg
I believe that Spain is using Nagra cards and they require special commands in CCcam.cfg
Met één been in het graf..... Helaas
Re: Problem with Cccam in openpli 7.0 #9
-
- Member
- 18 posts
0
Neutral
Posted 21 January 2019 - 20:41
I use Cccam to see my subscription, and my problem is that it does not read my card.
The Spanish provider uses two types of cards "the white" (Nagra) and "the gray" (Seca) that we have the oldest subscribers.
Edited by Asterix, 21 January 2019 - 20:41.
Re: Problem with Cccam in openpli 7.0 #10
-
- Senior Member
- 5,519 posts
+115
Excellent
Posted 21 January 2019 - 22:19
How do you 'see' when your card doesn't work?Cccam works, because "I see" but not through my card.
I have tried saving my Cccam.cfg before updating and restoring it after the update and nothing.
Met één been in het graf..... Helaas
Re: Problem with Cccam in openpli 7.0 #11
-
- Member
- 18 posts
0
Neutral
Posted 22 January 2019 - 15:51
I see that Cccam is running
Re: Problem with Cccam in openpli 7.0 #12
-
- PLi® Core member
- 46,969 posts
+542
Excellent
Posted 22 January 2019 - 18:17
You might want to try running cccam in debug mode: cccam -d.
* Wavefrontier T90 with 28E/23E/19E/13E via SCR switches 2 x 2 x 6 user bands
I don't read PM -> if you have something to ask or to report, do it in the forum so others can benefit. I don't take freelance jobs.
Ik lees geen PM -> als je iets te vragen of te melden hebt, doe het op het forum, zodat anderen er ook wat aan hebben.
Re: Problem with Cccam in openpli 7.0 #13
-
- Member
- 18 posts
0
Neutral
Posted 22 January 2019 - 21:21
Thanks for the idea.
With Openpli 6.2 detects the card:
20:44:46.402 CCcam: starting CCcam 2.3.2 compiled on Mar 6 2018@14:27:07
20:44:46.403 CCcam: ======================================================================
20:44:46.403 CCcam: online using nodeId 44c6cf99071c5e6b
20:44:46.405 CCcam: dvb api3 detected
20:44:46.405 CCcam: BCM detected
20:44:46.405 CCcam: create 8 cam device(s)
20:44:52.921 CCcam: seca card found
20:45:02.192 CCcam: card added to broker with caid 100
20:45:02.258 CCcam: readKeyfile: cannot open /var/keys/SoftCam.Key or not found
20:45:02.258 CCcam: readKeyfile: cannot open /var/keys/AutoRoll.Key or not found
20:45:02.259 CCcam: static cw not found or bad
With Openpli 7.0 does not detect the card:
20:28:09.712 CCcam: starting CCcam 2.3.2 compiled on Mar 6 2018@14:27:07
20:28:09.712 CCcam: ======================================================================
20:28:09.712 CCcam: online using nodeId 2573fac513d153e0
20:28:09.714 CCcam: dvb api3 detected
20:28:09.714 CCcam: BCM detected
20:28:09.715 CCcam: create 8 cam device(s)
20:28:09.759 CCcam: readKeyfile: cannot open /var/keys/SoftCam.Key or not found
20:28:09.759 CCcam: readKeyfile: cannot open /var/keys/AutoRoll.Key or not found
20:28:09.759 CCcam: static cw not found or bad
In both cases it is the same version and cam.cfg
From here I do not know how to continue ...
Edited by Asterix, 22 January 2019 - 21:22.
Re: Problem with Cccam in openpli 7.0 #14
-
- PLi® Core member
- 57,441 posts
+708
Excellent
Posted 23 January 2019 - 07:49
Cccam 2.3.2 cannot properly detect m7’s seca card!
WaveFrontier 28.2E | 23.5E | 19.2E | 16E | 13E | 10/9E | 7E | 5E | 1W | 4/5W | 15W
Re: Problem with Cccam in openpli 7.0 #15
-
- Member
- 18 posts
0
Neutral
Posted 23 January 2019 - 19:13
Thank you! I have changed version 2.3.2 to 2.3.0 and it is perfect.
By the way, what does m7´s mean?
Re: Problem with Cccam in openpli 7.0 #16
-
- PLi® Core member
- 46,969 posts
+542
Excellent
Posted 23 January 2019 - 19:16
M7 is the owner of various brands in Europe, like CDS (NL), TVV (BE), Télésat (BE) and some others, mainly in Eastern Europe.
* Wavefrontier T90 with 28E/23E/19E/13E via SCR switches 2 x 2 x 6 user bands
I don't read PM -> if you have something to ask or to report, do it in the forum so others can benefit. I don't take freelance jobs.
Ik lees geen PM -> als je iets te vragen of te melden hebt, doe het op het forum, zodat anderen er ook wat aan hebben.
5 user(s) are reading this topic
0 members, 5 guests, 0 anonymous users
