Does it also crash if not streaming?
VU+ SoloSe v2 crashing constantly
Re: VU+ SoloSe v2 crashing constantly #21
Posted 24 January 2019 - 16:37
* Wavefrontier T90 with 28E/23E/19E/13E via SCR switches 2 x 2 x 6 user bands
I don't read PM -> if you have something to ask or to report, do it in the forum so others can benefit. I don't take freelance jobs.
Ik lees geen PM -> als je iets te vragen of te melden hebt, doe het op het forum, zodat anderen er ook wat aan hebben.
Re: VU+ SoloSe v2 crashing constantly #22
Posted 24 January 2019 - 16:44
I don't realy know because it streams all the time (my friend is watching TV). 1 stream all the time, second stream in the evening. Until now it still didn't hang so i'm still waiting.
I also made a RJ12 to USB adapter FTD1232 and tried with putty (115200 8 N 1), but i only get garbage in output, don't realy know what could be wrong.
Re: VU+ SoloSe v2 crashing constantly #23
Posted 24 January 2019 - 16:55
Try 9600 8N1.
You very well may be hitting a driver bug there. That's why I recommend testing it without streaming for some time.
* Wavefrontier T90 with 28E/23E/19E/13E via SCR switches 2 x 2 x 6 user bands
I don't read PM -> if you have something to ask or to report, do it in the forum so others can benefit. I don't take freelance jobs.
Ik lees geen PM -> als je iets te vragen of te melden hebt, doe het op het forum, zodat anderen er ook wat aan hebben.
Re: VU+ SoloSe v2 crashing constantly #24
Re: VU+ SoloSe v2 crashing constantly #25
Posted 26 January 2019 - 14:47
Well the Vu+ didn't hang until today, when we had power outage and also we are corrently experiencing some problems with our operator, so the internet and DVB-C are down every few minutes. After the power came back VU+ vorked for a few minutes, then OpenWebif and streaming stopped working, but i could stil watch TV normaly if i turned it on. I'm attaching that logs:
Mesaages
Dmesg
and here is the log before power outage
I'm creating a now log now again, if anything woild happen.
Re: VU+ SoloSe v2 crashing constantly #26
Posted 29 January 2019 - 19:11
You said you were streaming, but the log suggests you are transcoding. Transcoding is notoriously unstable.
* Wavefrontier T90 with 28E/23E/19E/13E via SCR switches 2 x 2 x 6 user bands
I don't read PM -> if you have something to ask or to report, do it in the forum so others can benefit. I don't take freelance jobs.
Ik lees geen PM -> als je iets te vragen of te melden hebt, doe het op het forum, zodat anderen er ook wat aan hebben.
Re: VU+ SoloSe v2 crashing constantly #27
Posted 29 January 2019 - 22:17
I realy wouldn't know about that. All video request's go to port 8001, also the playlist itself is just taken from OpenWebif as complete playlist, so it should not be transcoding playlist. Which entry in log shows that? Untill now i'm still waitnig, that it hangs again. 1/4 of the log until now (too big for pastebin):
https://pastebin.com....com/FWrprGcP
Re: VU+ SoloSe v2 crashing constantly #28
Posted 30 January 2019 - 05:50
Ok, it hanged again. This time SSH works, OpenWebif is dead, Oscam web interface is responding normaly. The device cannot be turned on by remote, no response on button press.
Re: VU+ SoloSe v2 crashing constantly #29
Re: VU+ SoloSe v2 crashing constantly #30
Posted 30 January 2019 - 10:44
Well, that's not realy good news, since it's happening almost from when it was new.
I'm now running Gstreamer debugging and afterwards i will try with mounting a fan on the CPU cooler. And that is probably all that can be tried.
Any sugestions which devices have DVB-C FBC tuner to buy it instead of VU+? Or VU+ is actualy good and i'm just out of luck?
Re: VU+ SoloSe v2 crashing constantly #31
Posted 30 January 2019 - 18:15
Gstreamer is not involved in DVB streaming (despite it's name) and gstreamer will also not crash the receiver.
* Wavefrontier T90 with 28E/23E/19E/13E via SCR switches 2 x 2 x 6 user bands
I don't read PM -> if you have something to ask or to report, do it in the forum so others can benefit. I don't take freelance jobs.
Ik lees geen PM -> als je iets te vragen of te melden hebt, doe het op het forum, zodat anderen er ook wat aan hebben.
Re: VU+ SoloSe v2 crashing constantly #32
Posted 1 February 2019 - 10:53
Well, it's probably realy something with the hardware. I have one last log to check (only last part of it) if anyone find's anything suspicius.
Thank you for all help.
Re: VU+ SoloSe v2 crashing constantly #33
Posted 1 February 2019 - 11:22
The duo4k isn't that mature yet. If you're going to stability, I'd suggest using Uno4kSE or Ultimo4k.
* Wavefrontier T90 with 28E/23E/19E/13E via SCR switches 2 x 2 x 6 user bands
I don't read PM -> if you have something to ask or to report, do it in the forum so others can benefit. I don't take freelance jobs.
Ik lees geen PM -> als je iets te vragen of te melden hebt, doe het op het forum, zodat anderen er ook wat aan hebben.
Re: VU+ SoloSe v2 crashing constantly #34
Re: VU+ SoloSe v2 crashing constantly #35
Re: VU+ SoloSe v2 crashing constantly #36
Posted 4 February 2019 - 11:30
Firmware mature.
Currently in use: VU+ Duo 4K (2xFBC S2), VU+ Solo 4K (1xFBC S2), uClan Usytm 4K Pro (S2+T2), Octagon SF8008 (S2+T2), Zgemma H9.2H (S2+T2)
Due to my bad health, I will not be very active at times and may be slow to respond. I will not read the forum or PM on a regular basis.
Many answers to your question can be found in our new and improved wiki.
Re: VU+ SoloSe v2 crashing constantly #37
0 user(s) are reading this topic
0 members, 0 guests, 0 anonymous users