10 replies to this topic

[fatnasa]

Hello Everyone

 

Hope you are doing well .

 

currently i have  VU+ DUO2  running openpli 7.0 with 2 tuners as below :

 

* A-B  "dual dvb-s2 tuner"

* C-D "Single dvb-s2 tuner"

 

my question is about the single DVB-S2 tuner :

 

LNB IN : is connected to Diseqc switch  for NileSat 7W (Port A) and Badr 26E (PortB)

LNB out:  is connected to another E2 receiver

 

so Would you please help me to configure the tuner for Diseqc "ports" as below :

 

(Port A) ===== NileSat 7W and Eutelsat 8W (2 satellites , almost same position )

(Port ===== Badr 26E and  Eutelsat 25B (25.5°E)  (2 satellites , almost same position )

 

i have tried , but only single satellite entry can be done so i am not sure how to identify 2 satellites for the same port

 

one more thing , i couldn't find the Eutelsat 25B in the list of satellites , do you know how this satellite can be added ?

 

thanks in advance,

 

Wish you Nice night

[jpuigs]

Eutelsat 25 was renamed to Es'hail

You have to do an advanced configuration.

 

Configure 7 West    7W.jpg   93.2KB   1 downloads     and save.

Then configure 8 West, and set LNB=1, like 7 West.

 

 

Configure 26 East,     26E.jpg   90.7KB   1 downloads    and save.

Then configure 25.5 East and set LNB=2, like 26 East.

 

 

I don't know if your disecq is 1.0 or toneburst. Change if needed.

Edited by jpuigs, 11 February 2019 - 23:06.

[fatnasa]

Thanks a lot for your prompt help   i am going to test this and let you know asap

 

thanks again , have a good night

[fatnasa]

i have tried to follow , but i am still not able to to find either Eutelsat 25 nor Es'hail in the list of available satellites.

 

do you know how can i add it? is it something related to satellites.xml because i cannot find it there? if yes is there  a way to get an updated version?

 

thanks once again

[jpuigs]

https://raw.githubus.../satellites.xml

 

I see it appears…..

 

<sat name="25.5E Ku-band Es'hail 1" flags="1" position="255">

  <transponder frequency="11045000" symbol_rate="27500000" polarization="0" fec_inner="2" system="1" modulation="2" />

  <transponder frequency="11065000" symbol_rate="27500000" polarization="1" fec_inner="2" system="1" modulation="2" />

  <transponder frequency="11084000" symbol_rate="27500000" polarization="0" fec_inner="2" system="1" modulation="2" />

  <transponder frequency="11103000" symbol_rate="27500000" polarization="1" fec_inner="2" system="1" modulation="2" />

  <transponder frequency="11123000" symbol_rate="27500000" polarization="0" fec_inner="2" system="1" modulation="2" />

  <transponder frequency="11142000" symbol_rate="27500000" polarization="1" fec_inner="3" system="0" modulation="1" />

  <transponder frequency="11180000" symbol_rate="27500000" polarization="1" fec_inner="2" system="1" modulation="2" />

  <transponder frequency="11547000" symbol_rate="27500000" polarization="1" fec_inner="2" system="1" modulation="2" />

  <transponder frequency="11566000" symbol_rate="27500000" polarization="0" fec_inner="2" system="1" modulation="2" />

  <transponder frequency="11585000" symbol_rate="27500000" polarization="1" fec_inner="2" system="1" modulation="2" />

  <transponder frequency="11604000" symbol_rate="27500000" polarization="0" fec_inner="3" system="0" modulation="1" />

  <transponder frequency="11623000" symbol_rate="27500000" polarization="1" fec_inner="2" system="1" modulation="2" />

  <transponder frequency="11642000" symbol_rate="27500000" polarization="0" fec_inner="2" system="1" modulation="2" />

  <transponder frequency="11669000" symbol_rate="27500000" polarization="1" fec_inner="2" system="1" modulation="2" />

  <transponder frequency="11678000" symbol_rate="27500000" polarization="0" fec_inner="3" system="1" modulation="2" />

</sat>

Edited by jpuigs, 12 February 2019 - 01:21.

[WanWizard]

File created on 2019-02-10T22:29:21

so part of the image updates published yesterday.

[fatnasa]

Thank you once again for you wonderful help , i have updated the image and the files got successfully updated and i can see it so i am going to test the suggested configuration and let you know the result.

 

Have nice day!

[Erik Slagter]

Second tuner, single, is C-D?

[fatnasa]

@Erik

 

The single tuner is ==== >  Tuner C Vuplus DVB-S NIM(AVL6211) (DVB-S2)

 

the dual tuner : 

 

Tuner A     Vuplus DVB-S NIM(AVL6222) (DVB-S2)
Tuner B     Vuplus DVB-S NIM(AVL6222) (DVB-S2)

 

@jpuigs :

 

when using the tuner LNB out  to another E2 receiver :  should the Diseqc configuration be done on both receivers?

 

thanks again for your help

[jpuigs]

????  Yes.

 

If you want to be able to receive on 2nd. receiver the same you receive in the first receiver., you have to configure it in the same way, otherwise you won't get everything.

Edited by jpuigs, 13 February 2019 - 23:12.

[fatnasa]

thank you so much , the setup went smoothly as expected

 

 

thanks  again for your help