Heb vaker last van groen scherm op solo4K en wat me opvalt is dat box erg lang doet over iets downloaden aplicatie.
zal de crach log hier ff plaatsen misschie dat dit iemand wat zegt.
Bedankt voor het meekijken alvast
OpenPLi Enigma2 crash log
crashdate=do jan 1 01:00:27 1970
compiledate=Jan 21 2019
skin=PLi-FullNightHD/skin.xml
sourcedate=2019-01-16
branch=release-6.2
rev=a7f2f4d
component=Enigma2
stbmodel=solo4k
stbmodel=dm8000
kernelcmdline=root=/dev/mmcblk0p4 rootwait rw rootflags=data=journal debug coherent_pool=2M bmem=633m@387m bmem=499m@2573m
nimsockets=NIM Socket 0:
imageissue=openpli 6.2-release %h
dmesg
<6>[ 0.000000] Booting Linux on physical CPU 0x0
<5>[ 0.000000] Linux version 3.14.28-1.8 (build@bouwserver2) (gcc version 6.2.0 (GCC) ) #1 SMP Tue May 8 02:14:55 CEST 2018
<6>[ 0.000000] CPU: ARMv7 Processor [420f00f3] revision 3 (ARMv7), cr=30c7387d
<6>[ 0.000000] CPU: PIPT / VIPT nonaliasing data cache, PIPT instruction cache
<6>[ 0.000000] Machine model: BCM97366SFF_bad_MoCA
<6>[ 0.000000] moving dtb from 0x000000000761c000 to 0x00000000008342d0
<6>[ 0.000000] bmem: Reserved 633 MiB at 0x0000000018300000
<6>[ 0.000000] bmem: Reserved 499 MiB at 0x00000000a0d00000
<6>[ 0.000000] cma: Reserved 16 MiB at 0x000000000f000000
<6>[ 0.000000] Memory policy: Data cache writealloc
<7>[ 0.000000] On node 0 totalpages: 524288
<7>[ 0.000000] free_area_init_node: node 0, pgdat c07f9740, node_mem_map cd7f2000
<7>[ 0.000000] Normal zone: 512 pages used for memmap
<7>[ 0.000000] Normal zone: 0 pages reserved
<7>[ 0.000000] Normal zone: 65536 pages, LIFO batch:15
<7>[ 0.000000] HighMem zone: 5632 pages used for memmap
<7>[ 0.000000] HighMem zone: 458752 pages, LIFO batch:31
<6>[ 0.000000] MCP: Write pairing already disabled
<6>[ 0.000000] PERCPU: Embedded 8 pages/cpu @cd7c2000 s8768 r8192 d15808 u32768
<7>[ 0.000000] pcpu-alloc: s8768 r8192 d15808 u32768 alloc=8*4096
<7>[ 0.000000] pcpu-alloc: [0] 0 [0] 1
<4>[ 0.000000] Built 1 zonelists in Zone order, mobility grouping on. Total pages: 523776
<5>[ 0.000000] Kernel command line: root=/dev/mmcblk0p4 rootwait rw rootflags=data=journal debug coherent_pool=2M bmem=633m@387m bmem=499m@2573m
<6>[ 0.000000] PID hash table entries: 1024 (order: 0, 4096 bytes)
<6>[ 0.000000] Dentry cache hash table entries: 32768 (order: 5, 131072 bytes)
<6>[ 0.000000] Inode-cache hash table entries: 16384 (order: 4, 65536 bytes)
<4>[ 0.000000] Memory: 892244K/2097152K available (5723K kernel code, 330K rwdata, 1876K rodata, 248K init, 182K bss, 1188524K reserved, 16384K cma-reserved, 671744K highmem)
<5>[ 0.000000] Virtual kernel memory layout:
<5>[ 0.000000] vector : 0xffff0000 - 0xffff1000 ( 4 kB)
<5>[ 0.000000] fixmap : 0xfff00000 - 0xfffe0000 ( 896 kB)
<5>[ 0.000000] vmalloc : 0xd0800000 - 0xff000000 ( 744 MB)
<5>[ 0.000000] lowmem : 0xc0000000 - 0xd0000000 ( 256 MB)
<5>[ 0.000000] pkmap : 0xbfe00000 - 0xc0000000 ( 2 MB)
<5>[ 0.000000] modules : 0xbf000000 - 0xbfe00000 ( 14 MB)
<5>[ 0.000000] .text : 0xc0008000 - 0xc077406c (7601 kB)
<5>[ 0.000000] .init : 0xc0775000 - 0xc07b3240 ( 249 kB)
<5>[ 0.000000] .data : 0xc07b4000 - 0xc0806870 ( 331 kB)
<5>[ 0.000000] .bss : 0xc0806878 - 0xc08342d0 ( 183 kB)
<6>[ 0.000000] Hierarchical RCU implementation.
<6>[ 0.000000] RCU restricting CPUs from NR_CPUS=4 to nr_cpu_ids=2.
<6>[ 0.000000] RCU: Adjusting geometry for rcu_fanout_leaf=16, nr_cpu_ids=2
<6>[ 0.000000] NR_IRQS:16 nr_irqs:16 16
<6>[ 0.000000] irq_brcmstb_l2: registered L2 intc (mem: 0xfc403000, parent irq: 95)
<6>[ 0.000000] irq_brcmstb_l2: registered L2 intc (mem: 0xfc441000, parent irq: 74)
<6>[ 0.000000] irq_brcmstb_l2: registered L2 intc (mem: 0xfc410640, parent irq: 97)
<6>[ 0.000000] irq_brcmstb_l2: registered L2 intc (mem: 0xfc4d1200, parent irq: 57)
<6>[ 0.000000] Architected cp15 timer(s) running at 27.00MHz (virt).
<6>[ 0.000004] sched_clock: 56 bits at 27MHz, resolution 37ns, wraps every 2545165795328ns
<6>[ 0.000010] Switching to timer-based delay loop
<6>[ 0.000280] Console: colour dummy device 80x30
<6>[ 0.000301] Calibrating delay loop (skipped), value calculated using timer frequency.. 54.00 BogoMIPS (lpj=270000)
<6>[ 0.000310] pid_max: default: 32768 minimum: 301
<6>[ 0.000412] Mount-cache hash table entries: 1024 (order: 0, 4096 bytes)
<6>[ 0.000418] Mountpoint-cache hash table entries: 1024 (order: 0, 4096 bytes)
<6>[ 0.006089] CPU: Testing write buffer coherency: ok
<6>[ 0.006296] CPU0: update cpu_power 1024
<6>[ 0.006303] CPU0: thread -1, cpu 0, socket 0, mpidr 80000000
<6>[ 0.006356] Setting up static identity map for 0x576ef8 - 0x576f50
<4>[ 0.009303] CPU1: Booted secondary processor
<6>[ 0.009324] CPU1: update cpu_power 1024
<6>[ 0.009328] CPU1: thread -1, cpu 1, socket 0, mpidr 80000001
<6>[ 0.009436] Brought up 2 CPUs
<6>[ 0.009447] SMP: Total of 2 processors activated.
<6>[ 0.009452] CPU: All CPU(s) started in SVC mode.
<6>[ 0.009817] devtmpfs: initialized
<6>[ 0.013477] VFP support v0.3: implementor 42 architecture 4 part 00 variant 0 rev 0
<6>[ 0.014533] regulator-dummy: no parameters
<6>[ 0.014726] NET: Registered protocol family 16
<6>[ 0.017208] DMA: preallocated 2048 KiB pool for atomic coherent allocations
<6>[ 0.018050] cpuidle: using governor ladder
<6>[ 0.018057] cpuidle: using governor menu
<4>[ 0.020015] irq: no irq domain found for /rdb/interrupt-controller@f040a580 !
<4>[ 0.020178] irq: no irq domain found for /rdb/interrupt-controller@f0417280 !
<6>[ 0.023547] syscon f0404000.syscon: regmap [mem 0xf0404000-0xf040452f] registered
<6>[ 0.023725] syscon f0442400.syscon: regmap [mem 0xf0442400-0xf04427ff] registered
<6>[ 0.023882] syscon f0462000.syscon: regmap [mem 0xf0462000-0xf04620ff] registered
<6>[ 0.024031] syscon f0404100.syscon: regmap [mem 0xf0404100-0xf0404157] registered
<6>[ 0.024182] syscon f0404158.syscon: regmap [mem 0xf0404158-0xf040418f] registered
<6>[ 0.024344] syscon f0410700.syscon: regmap [mem 0xf0410700-0xf041070f] registered
<6>[ 0.024492] syscon f0410710.syscon: regmap [mem 0xf0410710-0xf0410717] registered
<6>[ 0.024643] syscon f0501004.syscon: regmap [mem 0xf0501004-0xf0501403] registered
<6>[ 0.024791] syscon f0901004.syscon: regmap [mem 0xf0901004-0xf0901403] registered
<6>[ 0.024937] syscon f0404080.syscon: regmap [mem 0xf0404080-0xf0404083] registered
<6>[ 0.025087] syscon f04040a4.syscon: regmap [mem 0xf04040a4-0xf04040a7] registered
<6>[ 0.025230] syscon f0440154.syscon: regmap [mem 0xf0440154-0xf0440157] registered
<6>[ 0.025367] syscon f0440354.syscon: regmap [mem 0xf0440354-0xf0440357] registered
<6>[ 0.025517] syscon f0440400.syscon: regmap [mem 0xf0440400-0xf0440403] registered
<6>[ 0.026018] No ATAGs?
<6>[ 0.026036] hw-breakpoint: found 5 (+1 reserved) breakpoint and 4 watchpoint registers.
<6>[ 0.026041] hw-breakpoint: maximum watchpoint size is 8 bytes.
<6>[ 0.126592] brcm-pci f0470000.pcie: link down
<6>[ 0.142588] bio: create slab <bio-0> at 0
<5>[ 0.143387] SCSI subsystem initialized
<7>[ 0.143626] libata version 3.00 loaded.
<6>[ 0.144072] usbcore: registered new interface driver usbfs
<6>[ 0.144162] usbcore: registered new interface driver hub
<6>[ 0.144268] usbcore: registered new device driver usb
<6>[ 0.144418] Linux video capture interface: v2.00
<6>[ 0.144656] pps_core: LinuxPPS API ver. 1 registered
<6>[ 0.144661] pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giometti <giometti@linux.it>
<6>[ 0.144724] PTP clock support registered
<6>[ 0.145345] Advanced Linux Sound Architecture Driver Initialized.
<6>[ 0.146206] cfg80211: Calling CRDA to update world regulatory domain
<6>[ 0.146629] Switched to clocksource arch_sys_counter
<5>[ 0.146835] FS-Cache: Loaded
<4>[ 0.156573] thermal thermal_zone0: failed to read out thermal zone 0
<6>[ 0.156726] NET: Registered protocol family 2
<6>[ 0.157259] TCP established hash table entries: 2048 (order: 1, 8192 bytes)
<6>[ 0.157279] TCP bind hash table entries: 2048 (order: 2, 16384 bytes)
<6>[ 0.157305] TCP: Hash tables configured (established 2048 bind 2048)
<6>[ 0.157399] TCP: reno registered
<6>[ 0.157409] UDP hash table entries: 256 (order: 1, 8192 bytes)
<6>[ 0.157426] UDP-Lite hash table entries: 256 (order: 1, 8192 bytes)
<6>[ 0.157593] NET: Registered protocol family 1
<6>[ 0.157866] RPC: Registered named UNIX socket transport module.
<6>[ 0.157875] RPC: Registered udp transport module.
<6>[ 0.157880] RPC: Registered tcp transport module.
<6>[ 0.157885] RPC: Registered tcp NFSv4.1 backchannel transport module.
<7>[ 0.157897] PCI: CLS 0 bytes, default 64
<6>[ 0.158265] hw perfevents: enabled with ARMv7 Cortex-A15 PMU driver, 7 counters available
<6>[ 0.160082] futex hash table entries: 512 (order: 3, 32768 bytes)
<4>[ 0.160858] bounce pool size: 64 pages
<5>[ 0.161348] NFS: Registering the id_resolver key type
<5>[ 0.161383] Key type id_resolver registered
<5>[ 0.161387] Key type id_legacy registered
<6>[ 0.161399] nfs4filelayout_init: NFSv4 File Layout Driver Registering...
<6>[ 0.161405] Installing knfsd (copyright © 1996 okir@monad.swb.de).
<6>[ 0.161800] fuse init (API version 7.22)
<6>[ 0.161967] msgmni has been set to 462
<6>[ 0.162722] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 252)
<6>[ 0.162731] io scheduler noop registered
<6>[ 0.162735] io scheduler deadline registered
<6>[ 0.162755] io scheduler cfq registered (default)
<6>[ 0.163011] brcm-gisb-arb f0400000.gisb-arb: registered mem: fc400000, irqs: 259, 260
<6>[ 0.163637] Serial: 8250/16550 driver, 4 ports, IRQ sharing disabled
<6>[ 0.165162] f040b000.serial: ttyS0 at MMIO 0xf040b000 (irq = 108, base_baud = 5062500) is a 16550A
<6>[ 0.964232] console [ttyS0] enabled
<6>[ 0.968217] f040b040.serial: ttyS1 at MMIO 0xf040b040 (irq = 109, base_baud = 5062500) is a 16550A
<6>[ 0.977591] f040b080.serial: ttyS2 at MMIO 0xf040b080 (irq = 110, base_baud = 5062500) is a 16550A
<6>[ 0.990934] loop: module loaded
<3>[ 0.994732] ahci strict-ahci.0: can't get clock
<6>[ 0.999422] ahci strict-ahci.0: SSS flag set, parallel bus scan disabled
<6>[ 1.016667] ahci strict-ahci.0: AHCI 0001.0300 32 slots 2 ports 6 Gbps 0x3 impl platform mode
<6>[ 1.025207] ahci strict-ahci.0: flags: 64bit ncq sntf stag clo pmp slum part
<6>[ 1.034896] scsi0 : ahci_platform
<6>[ 1.038634] scsi1 : ahci_platform
<6>[ 1.042203] ata1: SATA max UDMA/133 mmio [mem 0xf046a000-0xf046aa9b] port 0x100 irq 72
<6>[ 1.050140] ata2: SATA max UDMA/133 mmio [mem 0xf046a000-0xf046aa9b] port 0x180 irq 72
<6>[ 1.059537] spi_brcmstb f0443400.spi: 1-lane output, 3-byte address
<6>[ 1.065944] spi_brcmstb f0443400.spi: master is unqueued, this is deprecated
<4>[ 1.073275] m25p80 spi32766.0: found mx25l3255e, expected m25p80
<6>[ 1.079307] m25p80 spi32766.0: mx25l3255e (4096 Kbytes)
<5>[ 1.084567] 5 ofpart partitions found on MTD device spi32766.0
<5>[ 1.090412] Creating 5 MTD partitions on "spi32766.0":
<5>[ 1.095558] 0x000000000000-0x000000200000 : "flash0.bolt"
<5>[ 1.101737] 0x000000200000-0x000000210000 : "flash0.macadr"
<5>[ 1.108006] 0x000000210000-0x000000220000 : "flash0.nvram"
<5>[ 1.114136] 0x000000220000-0x000000230000 : "flash0.devtree"
<5>[ 1.120496] 0x000000000000-0x000000400000 : "flash0"
<6>[ 1.127296] libphy: Fixed MDIO Bus: probed
<6>[ 1.132075] bcmgenet f0b60000.ethernet: GENET 4.3 EPHY: 0x1002
<6>[ 1.146632] libphy: bcmgenet MII bus: probed
<6>[ 1.168964] bcmgenet f0b60000.ethernet: configuring instance for internal PHY
<6>[ 1.177212] e1000e: Intel® PRO/1000 Network Driver - 2.3.2-k
<6>[ 1.183052] e1000e: Copyright© 1999 - 2013 Intel Corporation.
<6>[ 1.307386] xhci-brcm: xHCI BRCM driver
<6>[ 1.311362] xhci-brcm f0481000.xhci: xHCI Host Controller
<6>[ 1.316950] xhci-brcm f0481000.xhci: new USB bus registered, assigned bus number 1
<6>[ 1.324847] xhci-brcm f0481000.xhci: irq 116, io mem 0xf0481000
<6>[ 1.331384] hub 1-0:1.0: USB hub found
<3>[ 1.335160] hub 1-0:1.0: config failed, hub doesn't have any ports! (err -19)
<6>[ 1.342444] xhci-brcm f0481000.xhci: xHCI Host Controller
<6>[ 1.348019] xhci-brcm f0481000.xhci: new USB bus registered, assigned bus number 2
<6>[ 1.356105] hub 2-0:1.0: USB hub found
<6>[ 1.359888] hub 2-0:1.0: 2 ports detected
<6>[ 1.364216] ehci-brcm: EHCI BRCM driver
<6>[ 1.368230] ehci-brcm f0480300.ehci: EHCI Host Controller
<6>[ 1.373810] ehci-brcm f0480300.ehci: new USB bus registered, assigned bus number 3
<6>[ 1.391544] ehci-brcm f0480300.ehci: irq 112, io mem 0xf0480300
<6>[ 1.416633] ehci-brcm f0480300.ehci: USB 2.0 started, EHCI 1.00
<6>[ 1.423064] hub 3-0:1.0: USB hub found
<6>[ 1.426845] hub 3-0:1.0: 1 port detected
<6>[ 1.430990] ehci-brcm f0480500.ehci: EHCI Host Controller
<6>[ 1.436555] ehci-brcm f0480500.ehci: new USB bus registered, assigned bus number 4
<6>[ 1.454263] ehci-brcm f0480500.ehci: irq 113, io mem 0xf0480500
<6>[ 1.476702] ehci-brcm f0480500.ehci: USB 2.0 started, EHCI 1.00
<6>[ 1.483141] hub 4-0:1.0: USB hub found
<6>[ 1.486919] hub 4-0:1.0: 1 port detected
<6>[ 1.491068] ehci-brcm f0490300.ehci: EHCI Host Controller
<6>[ 1.496638] ehci-brcm f0490300.ehci: new USB bus registered, assigned bus number 5
<6>[ 1.514341] ehci-brcm f0490300.ehci: irq 118, io mem 0xf0490300
<6>[ 1.536634] ehci-brcm f0490300.ehci: USB 2.0 started, EHCI 1.00
<6>[ 1.543045] hub 5-0:1.0: USB hub found
<6>[ 1.547495] hub 5-0:1.0: 1 port detected
<6>[ 1.551635] ehci-brcm f0490500.ehci: EHCI Host Controller
<6>[ 1.557239] ehci-brcm f0490500.ehci: new USB bus registered, assigned bus number 6
<6>[ 1.574939] ehci-brcm f0490500.ehci: irq 119, io mem 0xf0490500
<6>[ 1.596631] ehci-brcm f0490500.ehci: USB 2.0 started, EHCI 1.00
<6>[ 1.603052] hub 6-0:1.0: USB hub found
<6>[ 1.607215] hub 6-0:1.0: 1 port detected
<6>[ 1.611381] ohci-brcm: OHCI BRCM driver
<6>[ 1.615384] ohci-brcm f0480400.ohci: BRCM OHCI controller
<6>[ 1.620965] ohci-brcm f0480400.ohci: new USB bus registered, assigned bus number 7
<6>[ 1.626648] ata1: SATA link up 6.0 Gbps (SStatus 133 SControl 300)
<6>[ 1.627603] ata1.00: ATA-8: HGST HTS541010A9E680, JA0OA7J0, max UDMA/133
<6>[ 1.627607] ata1.00: 1953525168 sectors, multi 16: LBA48 NCQ (depth 31/32)
<6>[ 1.628630] ata1.00: configured for UDMA/133
<5>[ 1.628922] scsi 0:0:0:0: Direct-Access ATA HGST HTS541010A9 JA0O PQ: 0 ANSI: 5
<5>[ 1.629597] sd 0:0:0:0: [sda] 1953525168 512-byte logical blocks: (1.00 TB/931 GiB)
<5>[ 1.629600] sd 0:0:0:0: [sda] 4096-byte physical blocks
<5>[ 1.629740] sd 0:0:0:0: [sda] Write Protect is off
<7>[ 1.629744] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
<5>[ 1.629803] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
<6>[ 1.692534] ohci-brcm f0480400.ohci: irq 114, io mem 0xf0480400
<5>[ 1.697468] sd 0:0:0:0: Attached scsi generic sg0 type 0
<6>[ 1.761206] hub 7-0:1.0: USB hub found
<6>[ 1.764979] hub 7-0:1.0: 1 port detected
<6>[ 1.769190] ohci-brcm f0480600.ohci: BRCM OHCI controller
<6>[ 1.774766] ohci-brcm f0480600.ohci: new USB bus registered, assigned bus number 8
<6>[ 1.782393] ohci-brcm f0480600.ohci: irq 115, io mem 0xf0480600
<6>[ 1.851142] hub 8-0:1.0: USB hub found
<6>[ 1.854914] hub 8-0:1.0: 1 port detected
<6>[ 1.859079] ohci-brcm f0490400.ohci: BRCM OHCI controller
<6>[ 1.864657] ohci-brcm f0490400.ohci: new USB bus registered, assigned bus number 9
<6>[ 1.872285] ohci-brcm f0490400.ohci: irq 120, io mem 0xf0490400
<6>[ 1.936662] usb 5-1: new high-speed USB device number 2 using ehci-brcm
<6>[ 1.941183] hub 9-0:1.0: USB hub found
<6>[ 1.941203] hub 9-0:1.0: 1 port detected
<6>[ 1.941437] ohci-brcm f0490600.ohci: BRCM OHCI controller
<6>[ 1.941601] ohci-brcm f0490600.ohci: new USB bus registered, assigned bus number 10
<6>[ 1.941653] ohci-brcm f0490600.ohci: irq 121, io mem 0xf0490600
<6>[ 1.974450] sda: sda1
<5>[ 1.977557] sd 0:0:0:0: [sda] Attached SCSI disk
<6>[ 2.001166] hub 10-0:1.0: USB hub found
<6>[ 2.005025] hub 10-0:1.0: 1 port detected
<6>[ 2.009311] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
<6>[ 2.015854] ehci-pci: EHCI PCI platform driver
<6>[ 2.020421] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
<6>[ 2.026615] ohci-pci: OHCI PCI platform driver
<6>[ 2.031402] usbcore: registered new interface driver usb-storage
<6>[ 2.037635] mousedev: PS/2 mouse device common for all mice
<6>[ 2.043656] i2c /dev entries driver
<6>[ 2.047201] ata2: SATA link down (SStatus 0 SControl 300)
<6>[ 2.053077] IR NEC protocol handler initialized
<6>[ 2.057624] IR RC5(x) protocol handler initialized
<6>[ 2.062420] IR RC6 protocol handler initialized
<6>[ 2.066965] IR JVC protocol handler initialized
<6>[ 2.071505] IR Sony protocol handler initialized
<6>[ 2.076125] IR RC5 (streamzap) protocol handler initialized
<6>[ 2.081709] IR SANYO protocol handler initialized
<6>[ 2.086418] IR MCE Keyboard/mouse protocol handler initialized
<4>[ 2.092332] cpufreq_cpu0: failed to get cpu0 regulator: -19
<6>[ 2.098297] sdhci: Secure Digital Host Controller Interface driver
<6>[ 2.104484] sdhci: Copyright© Pierre Ossman
<6>[ 2.108858] sdhci-pltfm: SDHCI platform and OF driver helper
<6>[ 2.115653] mmc0: no vqmmc regulator found
<6>[ 2.119765] mmc0: no vmmc regulator found
<6>[ 2.166637] mmc0: SDHCI controller on f0440000.sdhci [f0440000.sdhci] using ADMA
<6>[ 2.175121] mmc1: no vqmmc regulator found
<6>[ 2.179234] mmc1: no vmmc regulator found
<6>[ 2.226643] mmc1: SDHCI controller on f0440200.sdhci [f0440200.sdhci] using ADMA
<6>[ 2.234486] usbcore: registered new interface driver usbhid
<6>[ 2.240075] usbhid: USB HID core driver
<6>[ 2.244604] TCP: cubic registered
<6>[ 2.247942] NET: Registered protocol family 17
<5>[ 2.252666] Key type dns_resolver registered
<5>[ 2.259065] Registering SWP/SWPB emulation handler
<6>[ 2.266330] regulator-dummy: disabling
<6>[ 2.298173] ALSA device list:
<6>[ 2.301152] No soundcards found.
<6>[ 2.304857] Waiting for root device /dev/mmcblk0p4...
<6>[ 2.530275] mmc1: BKOPS_EN bit is not set
<6>[ 2.540519] mmc1: new high speed MMC card at address 0001
<6>[ 2.546326] mmcblk0: mmc1:0001 4FPD3R 3.64 GiB
<6>[ 2.550994] mmcblk0boot0: mmc1:0001 4FPD3R partition 1 4.00 MiB
<6>[ 2.557021] mmcblk0boot1: mmc1:0001 4FPD3R partition 2 4.00 MiB
<6>[ 2.566705] mmcblk0: p1 p2 p3 p4
<6>[ 2.571546] mmcblk0boot1: unknown partition table
<6>[ 2.577140] mmcblk0boot0: unknown partition table
<4>[ 2.637188] EXT4-fs: Warning: mounting with data=journal disables delayed allocation and O_DIRECT support!
<6>[ 2.652647] EXT4-fs (mmcblk0p4): mounted filesystem with journalled data mode. Opts: data=journal
<6>[ 2.661569] VFS: Mounted root (ext4 filesystem) on device 179:4.
<6>[ 2.671524] devtmpfs: mounted
<6>[ 2.674778] Freeing unused kernel memory: 248K (c0775000 - c07b3000)
<6>[ 3.102559] EXT4-fs (sda1): mounted filesystem with ordered data mode. Opts: (null)
<6>[ 3.211897] EXT4-fs (mmcblk0p4): re-mounted. Opts: nodelalloc,data=journal
<6>[ 3.516659] usb 5-1: reset high-speed USB device number 2 using ehci-brcm
<6>[ 3.676306] ieee80211 phy0: rt2x00_set_rt: Info - RT chipset 5392, rev 0223 detected
<6>[ 3.712181] ieee80211 phy0: rt2x00_set_rf: Info - RF chipset 5372 detected
<7>[ 3.720291] ieee80211 phy0: Selected rate control algorithm 'minstrel_ht'
<6>[ 3.745753] usbcore: registered new interface driver rt2800usb
<5>[ 3.918232] random: dd urandom read with 77 bits of entropy available
<4>[ 3.970377] procmk_init
<4>[ 3.977056] bcm_event: module license 'Proprietary' taints kernel.
<4>[ 3.983251] Disabling lock debugging due to kernel taint
<6>[ 7.337284] DVB: registering new adapter (_vuplus_solo4k_)
<4>[ 7.827313] bcm7376: hotplug_callback():
<4>[ 7.827313] Hotplug - status.connected 1:0:1
<4>[ 7.834312] bcm7376: hotplug_callback():
<4>[ 7.834312] Hotplug - connecting HDMI to display 0xe
<5>[ 8.068382] random: nonblocking pool is initialized
<6>[ 8.136632] brcm_demux_init: $Id: bcm_demux.c,v 0.7 $
<4>[ 8.306790] [MPVR]: >> misc_pvr_init
<4>[ 8.314679] [VID]: 6bcm7335_video_init
<4>[ 8.386881] [AUD]: 6bcm7335_audio_init
<4>[ 8.391784] [AUD]: >> bcm_audio_capture_init
<4>[ 8.417005] qam=0, ofdm=0, satellite=1
<6>[ 8.422805] BRCM brcm_dvb0: DVB: registering adapter 0 frontend 0 (Vuplus FE)...
<4>[ 8.432899] qam=0, ofdm=0, satellite=1
<6>[ 8.437565] BRCM brcm_dvb0: DVB: registering adapter 0 frontend 0 (Vuplus FE)...
<4>[ 8.448762] qam=0, ofdm=0, satellite=1
<6>[ 8.454124] BRCM brcm_dvb0: DVB: registering adapter 0 frontend 0 (Vuplus FE)...
<4>[ 8.462091] qam=0, ofdm=0, satellite=1
<6>[ 8.466583] BRCM brcm_dvb0: DVB: registering adapter 0 frontend 0 (Vuplus FE)...
<4>[ 8.475610] qam=0, ofdm=0, satellite=1
<6>[ 8.480289] BRCM brcm_dvb0: DVB: registering adapter 0 frontend 0 (Vuplus FE)...
<4>[ 8.491600] qam=0, ofdm=0, satellite=1
<6>[ 8.496088] BRCM brcm_dvb0: DVB: registering adapter 0 frontend 0 (Vuplus FE)...
<4>[ 8.505616] qam=0, ofdm=0, satellite=1
<6>[ 8.510152] BRCM brcm_dvb0: DVB: registering adapter 0 frontend 0 (Vuplus FE)...
<4>[ 8.519601] qam=0, ofdm=0, satellite=1
<6>[ 8.524192] BRCM brcm_dvb0: DVB: registering adapter 0 frontend 0 (Vuplus FE)...
<4>[ 8.533071] bcm7376: bcm7335_frontend_init(): vtuner1 : 9
<4>[ 8.648525] BKNI_P_GetTrackAllocEntry_resize: resizing from 5376->8704
<4>[ 8.656805] BKNI_Malloc(linuxkernel) top users:
<4>[ 8.656805] blocks, bytes, filename:line
<4>[ 8.665872] 1289, 274468, BSEAV/lib/utils/balloc.c:31
<6>[ 8.747262] input: dreambox advanced remote control (native) as /devices/virtual/input/input0
<6>[ 8.779010] [LCD]: registered
<6>[ 9.326981] [CI]: registered ci0
<6>[ 9.367197] [CI]: CI interface initialised
<6>[ 9.367197]
<6>[ 9.427040] [DFP]: registered dbox fp
<6>[ 9.447480] [SC]: registered sci0
<6>[ 9.453087] [SC]: registered sci1
<4>[ 11.086649] system_time_set wakeup mode get
<4>[ 11.146661] system_time_set wakeup mode get 0xc4
<6>[ 11.596651] f0b60000.etherne:01: Broadcom BCM7366 PHY revision: 0x10, patch: 2
<6>[ 13.596732] libphy: f0b60000.etherne:01 - Link is Down
<6>[ 14.776802] libphy: f0b60000.etherne:01 - Link is Up - 1000/Full
<6>[ 18.741606] NET: Registered protocol family 10
<6>[ 18.895211] Bluetooth: Core ver 2.18
<6>[ 18.899163] NET: Registered protocol family 31
<6>[ 18.903625] Bluetooth: HCI device and connection manager initialized
<6>[ 18.910039] Bluetooth: HCI socket layer initialized
<6>[ 18.914941] Bluetooth: L2CAP socket layer initialized
<6>[ 18.920081] Bluetooth: SCO socket layer initialized
<4>[ 19.553957] [VID]: VIDEO_SET_STREAMTYPE 1
<4>[ 19.558547] [VID]: VIDEO_SELECT_SOURCE 1 0
<4>[ 19.563267] [VID]: VIDEO_PLAY 1 5 0
<4>[ 19.572193] [VID]: VIDEO_CONTINUE 1 1
<4>[ 19.577257] [VID]: VIDEO_CLEAR_BUFFER 1 1 0
<4>[ 19.741557] [VID]: VIDEO_STOP 0 1
<4>[ 19.746064] [VID]: VIDEO_SELECT_SOURCE 0 0
<4>[ 22.572531] [AUD]: AUDIO_SET_MUTE 0
<4>[ 22.577199] [AUD]: AUDIO_SET_MIXER -884023672
<4>[ 22.581653] [AUD]: AUDIO_SET_MIXER : amixl 0, amixr 0
<4>[ 22.586743] [AUD]: AUDIO_SET_MIXER : next left volume 0, right volume 0
<4>[ 22.593371] [AUD]: AUDIO_SET_MIXER : next left volume -70, right volume -70
<4>[ 26.765217] [AUD]: AUDIO_SET_MIXER -884023672
<4>[ 26.769706] [AUD]: AUDIO_SET_MIXER : amixl 32, amixr 32
<4>[ 26.774939] [AUD]: AUDIO_SET_MIXER : next left volume -70, right volume -70
<4>[ 26.781966] [AUD]: AUDIO_SET_MIXER : next left volume -2355, right volume -2355
