Jump to content


Photo

OpenPLi 7.0 Vu+ Uno4K and Duo4K AAC-HE audio doesn't work

AAC-HE audio

  • Please log in to reply
54 replies to this topic

Re: OpenPLi 7.0 Vu+ Uno4K and Duo4K AAC-HE audio doesn't work #21 WanWizard

  • PLi® Core member
  • 68,309 posts

+1,719
Excellent

Posted 27 February 2019 - 18:30

No, drivers are hardware specific.


Currently in use: VU+ Duo 4K (2xFBC S2), VU+ Solo 4K (1xFBC S2), uClan Usytm 4K Pro (S2+T2), Octagon SF8008 (S2+T2), Zgemma H9.2H (S2+T2)

Due to my bad health, I will not be very active at times and may be slow to respond. I will not read the forum or PM on a regular basis.

Many answers to your question can be found in our new and improved wiki.


Re: OpenPLi 7.0 Vu+ Uno4K and Duo4K AAC-HE audio doesn't work #22 anudanan

  • Senior Member
  • 1,185 posts

+16
Neutral

Posted 28 February 2019 - 06:40

Tested and confirmed.

I drop 2019.02.12 OpenPLi tuner drivers for OpenVIX 5.2 and audio works fine.

I´m a little bit confuded. the openpli 7.0 here in the download area include drivers from dezember 2018. You said you droped the drivers from 2019-02-09 openpli and used it for openvix. Have you a development version of openpli on your system witht drivers from 2019 ?


Receiver:2 x Uno4k SE (PLI 7.3 rel), 1 x ET9200 (PLI 4.0), NAS: 2 x QNAP 410, TV: LG 65C8llla, LG 47LB570V, LG 42LM615S, Sound: Yamaha RX-v663, Teufel System 5 THX


Re: OpenPLi 7.0 Vu+ Uno4K and Duo4K AAC-HE audio doesn't work #23 tappari

  • Senior Member
  • 121 posts

+2
Neutral

Posted 28 February 2019 - 08:42

 

Tested and confirmed.

I drop 2019.02.12 OpenPLi tuner drivers for OpenVIX 5.2 and audio works fine.

I´m a little bit confuded. the openpli 7.0 here in the download area include drivers from dezember 2018. You said you droped the drivers from 2019-02-09 openpli and used it for openvix. Have you a development version of openpli on your system witht drivers from 2019 ?

 

Drivers can be downloaded here: http://archive.vuplu...90212.r0.tar.gz



Re: OpenPLi 7.0 Vu+ Uno4K and Duo4K AAC-HE audio doesn't work #24 anudanan

  • Senior Member
  • 1,185 posts

+16
Neutral

Posted 28 February 2019 - 08:53

thx


Receiver:2 x Uno4k SE (PLI 7.3 rel), 1 x ET9200 (PLI 4.0), NAS: 2 x QNAP 410, TV: LG 65C8llla, LG 47LB570V, LG 42LM615S, Sound: Yamaha RX-v663, Teufel System 5 THX


Re: OpenPLi 7.0 Vu+ Uno4K and Duo4K AAC-HE audio doesn't work #25 anudanan

  • Senior Member
  • 1,185 posts

+16
Neutral

Posted 28 February 2019 - 08:55

Maybe that the new drivers works not with openpli 7.0 but with the develop branch and later openpli 7.1


Receiver:2 x Uno4k SE (PLI 7.3 rel), 1 x ET9200 (PLI 4.0), NAS: 2 x QNAP 410, TV: LG 65C8llla, LG 47LB570V, LG 42LM615S, Sound: Yamaha RX-v663, Teufel System 5 THX


Re: OpenPLi 7.0 Vu+ Uno4K and Duo4K AAC-HE audio doesn't work #26 WanWizard

  • PLi® Core member
  • 68,309 posts

+1,719
Excellent

Posted 28 February 2019 - 11:00

I doubt it.

 

It they load, they work. If they don't load, nothing works.


Currently in use: VU+ Duo 4K (2xFBC S2), VU+ Solo 4K (1xFBC S2), uClan Usytm 4K Pro (S2+T2), Octagon SF8008 (S2+T2), Zgemma H9.2H (S2+T2)

Due to my bad health, I will not be very active at times and may be slow to respond. I will not read the forum or PM on a regular basis.

Many answers to your question can be found in our new and improved wiki.


Re: OpenPLi 7.0 Vu+ Uno4K and Duo4K AAC-HE audio doesn't work #27 Hermanni

  • Member
  • 15 posts

0
Neutral

Posted 5 March 2019 - 07:44

I think that the tuner driver package is not wrong because the exchange of working does not help.

Vu+ Images 3.0 audio works, VTi, audio works and OpenATV audio works.

The defect is more obvious in the OpenPLi 7.0 player or its codec?

This is because the recording with OpenPL's silent recording works with sounds in other E2 distributions.

Here's 5 minutes of audio for problematic recording viasat.zip


My STB: Vu+ Duo 4K UHD, Vu+ Uno 4K SE, Dreambox DM920 UHD 4K, Octagon SF1028P.
Other: Sony FW-49X8370C, Sony FW-43X8370C, STR-DH550.


Re: OpenPLi 7.0 Vu+ Uno4K and Duo4K AAC-HE audio doesn't work #28 WanWizard

  • PLi® Core member
  • 68,309 posts

+1,719
Excellent

Posted 5 March 2019 - 12:16

That recording plays fine here, both video and audio (DVB driver version 4.1.45-20190212.r0.0).


Currently in use: VU+ Duo 4K (2xFBC S2), VU+ Solo 4K (1xFBC S2), uClan Usytm 4K Pro (S2+T2), Octagon SF8008 (S2+T2), Zgemma H9.2H (S2+T2)

Due to my bad health, I will not be very active at times and may be slow to respond. I will not read the forum or PM on a regular basis.

Many answers to your question can be found in our new and improved wiki.


Re: OpenPLi 7.0 Vu+ Uno4K and Duo4K AAC-HE audio doesn't work #29 Hermanni

  • Member
  • 15 posts

0
Neutral

Posted 5 March 2019 - 12:42

That recording plays fine here, both video and audio (DVB driver version 4.1.45-20190212.r0.0).

VU+Duo 4K, the audio settings are?

Now the latest (2019.03.04) distribution inside and no help..

Goes nerves with DUO 4K device, UNO 4K SE works fine.. :(


My STB: Vu+ Duo 4K UHD, Vu+ Uno 4K SE, Dreambox DM920 UHD 4K, Octagon SF1028P.
Other: Sony FW-49X8370C, Sony FW-43X8370C, STR-DH550.


Re: OpenPLi 7.0 Vu+ Uno4K and Duo4K AAC-HE audio doesn't work #30 WanWizard

  • PLi® Core member
  • 68,309 posts

+1,719
Excellent

Posted 5 March 2019 - 12:47

I think you are running in circles:

 

OpenPLi 7.0 is a stable image, is doesn't get any intermediate updates, so it still has the drivers from december. So updating in the hope these things change is pointless.

 

I run a develop image, being tested in preparation of the 7.1-release, and that has the latest version of the BSP, which contains the 12-02-2019 r0 drivers, which may as well have fixed the problem you have.

 

This has been explained a few times before, you've been pointed towards the latest drivers, and I was under the impression you've tried those? If not, the reason you stil have this issue is rather obvious...


Currently in use: VU+ Duo 4K (2xFBC S2), VU+ Solo 4K (1xFBC S2), uClan Usytm 4K Pro (S2+T2), Octagon SF8008 (S2+T2), Zgemma H9.2H (S2+T2)

Due to my bad health, I will not be very active at times and may be slow to respond. I will not read the forum or PM on a regular basis.

Many answers to your question can be found in our new and improved wiki.


Re: OpenPLi 7.0 Vu+ Uno4K and Duo4K AAC-HE audio doesn't work #31 Hermanni

  • Member
  • 15 posts

0
Neutral

Posted 13 March 2019 - 20:12

If enable Bypass HDMI EDID checking and move to channel with AAC-HE audio all channel lose audio.
Restart enigma doesn't fix all channel audio problem, only cold boot repair audio.
Bypass HDMI EDID checking enable or disable has no effect on aac-he sounds silence problem.


Edited by Hermanni, 13 March 2019 - 20:13.

My STB: Vu+ Duo 4K UHD, Vu+ Uno 4K SE, Dreambox DM920 UHD 4K, Octagon SF1028P.
Other: Sony FW-49X8370C, Sony FW-43X8370C, STR-DH550.


Re: OpenPLi 7.0 Vu+ Uno4K and Duo4K AAC-HE audio doesn't work #32 -M-

  • Senior Member
  • 128 posts

+4
Neutral

Posted 15 March 2019 - 18:30

I have sound on AAC-HE. However need to have downmix on. I also run a own build version, newer than 7.0. The 7.0 and Duo 4K have some problems, so that is no for me. I actually don't care about AAC-HE, since the services that have it (for me) have an AC3 track that I want instead.

My recommendation is to wait for OpenPLi 7.1 and then test.

Please be aware of the settings for audio. They exist both on global level, but also on a per-service level (i.e. for each tv-channel). It is a global settings if per-service settings should be used or not. All these settings can cause confusion.

PS. I need to have downmix on to get sound. It is strange. I think the reason is that it is not actually possible to switch off downmix, but possible to select passthrough.



Re: OpenPLi 7.0 Vu+ Uno4K and Duo4K AAC-HE audio doesn't work #33 Taykun345

  • Senior Member
  • 1,296 posts

+41
Good

Posted 16 March 2019 - 07:44

I agree. Latest PLi is less stable for Duo4k than for other Vu+ receivers. But only because drivers are not mature enough. I dont have problems with basic function, watching TV. Only audio stuttering is annoying but you can fix this by just zapping.

I hope that with 7.1 drivers will fix some annoyances.

Sent from my HTC U11 using Tapatalk
Army MoodBlue HD skin modification by me: https://github.com/T...-MoodBlueHD-mod
Matrix10 MH-HD2 skin modification by me: https://github.com/B...-MX-HD2-OpenPli
MetrixHD skin modification by me: https://github.com/T...xHD-WPstyle-mod
Slovenian translation for OpenPLi E2: https://github.com/T...ion-for-OpenPLi

Re: OpenPLi 7.0 Vu+ Uno4K and Duo4K AAC-HE audio doesn't work #34 WanWizard

  • PLi® Core member
  • 68,309 posts

+1,719
Excellent

Posted 16 March 2019 - 11:39

No, the audio stuttering still hasn't been fixed (in the latest develop drivers).


Currently in use: VU+ Duo 4K (2xFBC S2), VU+ Solo 4K (1xFBC S2), uClan Usytm 4K Pro (S2+T2), Octagon SF8008 (S2+T2), Zgemma H9.2H (S2+T2)

Due to my bad health, I will not be very active at times and may be slow to respond. I will not read the forum or PM on a regular basis.

Many answers to your question can be found in our new and improved wiki.


Re: OpenPLi 7.0 Vu+ Uno4K and Duo4K AAC-HE audio doesn't work #35 RdM8000

  • Member
  • 19 posts

+1
Neutral

Posted 20 April 2019 - 11:16

Received my DUO4k yesterday and observed that on DVB-T2 there are indeed issues with sound. German channels work fine, Dutch channels (NPO1,2,3) are mute: image but no sound. Changing settings (downmix etc.), updating firmware don't help.

When viewing these channels on my PC using WebIF and VLC player, there is sound however. Maybe the Dutch use a slightly different AAC-HE than the Germans which the present drivers cannot handle. Hope new drivers will solve this issue.


VU+ DUO4k OpenPli 8.2


Re: OpenPLi 7.0 Vu+ Uno4K and Duo4K AAC-HE audio doesn't work #36 Hermanni

  • Member
  • 15 posts

0
Neutral

Posted 17 May 2019 - 19:32

OpenPLi 7.1 » Pre-release test images fix all my Duo 4K audio broplem.

Thanks all OpenPLi team.


My STB: Vu+ Duo 4K UHD, Vu+ Uno 4K SE, Dreambox DM920 UHD 4K, Octagon SF1028P.
Other: Sony FW-49X8370C, Sony FW-43X8370C, STR-DH550.


Re: OpenPLi 7.0 Vu+ Uno4K and Duo4K AAC-HE audio doesn't work #37 WanWizard

  • PLi® Core member
  • 68,309 posts

+1,719
Excellent

Posted 17 May 2019 - 21:24

Not all, the chopy audio problem is still there.


Currently in use: VU+ Duo 4K (2xFBC S2), VU+ Solo 4K (1xFBC S2), uClan Usytm 4K Pro (S2+T2), Octagon SF8008 (S2+T2), Zgemma H9.2H (S2+T2)

Due to my bad health, I will not be very active at times and may be slow to respond. I will not read the forum or PM on a regular basis.

Many answers to your question can be found in our new and improved wiki.


Re: OpenPLi 7.0 Vu+ Uno4K and Duo4K AAC-HE audio doesn't work #38 gh_n

  • Senior Member
  • 39 posts

0
Neutral

Posted 19 June 2019 - 08:24

Hi
unfortunately AAC-HE audio on hotbird transponder 10775 H 29900 doesn't work on mu Vu+Duo4K with the latest original frimware and pli neither i think there must be driver issues

Re: OpenPLi 7.0 Vu+ Uno4K and Duo4K AAC-HE audio doesn't work #39 Taykun345

  • Senior Member
  • 1,296 posts

+41
Good

Posted 19 June 2019 - 10:17

Interesting, I will also check. I am dissapointed with Vu+ and Duo4k. They are again very slow with fixing issues, also their priorities are messed up. They are rather adding new features (MIS in 45308X DVB-S2X for example) instead of fixing existing issues.


Army MoodBlue HD skin modification by me: https://github.com/T...-MoodBlueHD-mod
Matrix10 MH-HD2 skin modification by me: https://github.com/B...-MX-HD2-OpenPli
MetrixHD skin modification by me: https://github.com/T...xHD-WPstyle-mod
Slovenian translation for OpenPLi E2: https://github.com/T...ion-for-OpenPLi

Re: OpenPLi 7.0 Vu+ Uno4K and Duo4K AAC-HE audio doesn't work #40 twol

  • Senior Member
  • 442 posts

+15
Neutral

Posted 19 June 2019 - 17:57

Interesting, I will also check. I am dissapointed with Vu+ and Duo4k. They are again very slow with fixing issues, also their priorities are messed up. They are rather adding new features (MIS in 45308X DVB-S2X for example) instead of fixing existing issues.

“Their priorities“ are not mixed up - they make money by adding new “hot“ features like DVB-S2X“ - fixing costs them money.
I have never noticed that „a customer issue“ is a „Vu+ issue ..... or priority“

Gigablue Quad 4K & UE 4K
.........FBC Tuners:
------------------> DUR-Line DCR 5-1-8-L4 Multiswitch to 1.5M dish(28.2E)
------------------> Spaun SUS 5581/33 NFA Multiswitch to 80 cm dish(19.2E)
.........DVB-S2X into 90cm dish (27.5W)

Octagon sf8008, AX HD61, Edision Osmio 4K+, Zgemma H9Combo using Legacy ports on multiswitches
Zgemma H9twin & Zgemma H9 C/S mode into Giga4K
 



1 user(s) are reading this topic

0 members, 1 guests, 0 anonymous users