Someone who can see why text tv (tuxtxt)
crashes and restarts enigma!
OpenPLi Enigma2 crash log
crashdate=mån feb 25 15:26:25 2019
compiledate=Dec 14 2018
skin=Default Skin
sourcedate=2018-12-14
branch=develop
rev=8a44df2
component=enigma2, signal
compiledate=Dec 14 2018
skin=Default Skin
sourcedate=2018-12-14
branch=develop
rev=8a44df2
component=enigma2, signal
stbmodel=dm
kernelcmdline=bmem=192M@64M console=ttyS0,1000000 ubi.mtd=rootfs root=ubi0:dreambox-rootfs rootfstype=ubifs rw
nimsockets=NIM Socket 0:
imageissue=openpli 7* %h
kernelcmdline=bmem=192M@64M console=ttyS0,1000000 ubi.mtd=rootfs root=ubi0:dreambox-rootfs rootfstype=ubifs rw
nimsockets=NIM Socket 0:
imageissue=openpli 7* %h
:0: UserWarning: You do not have a working installation of the service_identity module: 'No module named service_identity'. Please install it from <https://pypi.python....ervice_identity> and make sure all of its dependencies are satisfied. Without the service_identity module, Twisted can perform only rudimentary TLS client hostname verification. Many valid certificate/hostname mappings may be rejected.
PC: 771a2db0
00000000 00000001 76b0c000 00000000
76e36000 00000000 007e9000 772f5000
772f5000 7ff36aec 00000000 00001e00
00000000 af220820 af2222d4 00000000
00a455c8 00000438 00000780 006b4d78
00000020 00a455e0 00d5f128 00977bf0
00000000 772f4ee0 00000000 00000000
006c9c30 7ff36a80 76efbcb0 0050c5bc
Backtrace:
/usr/bin/enigma2(_Z17handleFatalSignaliP9siginfo_tPv) [0x45DD28]
/lib/libc.so.6(memset) [0x771A2DB2]
/usr/bin/enigma2(_ZN7fbClass7SetModeEiii) [0x50C5BC]
/usr/bin/enigma2(_ZN5gFBDC13setResolutionEiii) [0x523110]
/usr/bin/enigma2(n/a) [0x5453F0]
/usr/lib/libpython2.7.so.1.0(PyEval_EvalFrameEx) [0x776AC47C]
-------FATAL SIGNAL
dmesg
<7>[ 56.610000] eth0: no IPv6 routers present
<4>[ 64.572000] sync0 is off so we enable it
<4>[ 64.573000] sync0: allocated pcroffset 0
<4>[ 64.573000] sync0: playback!
<4>[ 64.574000] VIDEO0: total delay: 0 (0 ms)
<4>[ 64.581000] VIDEO0: start decode
<4>[ 64.584000] VIDEO0: flush video decoder
<4>[ 64.627000] VIDEO0: first pts 0x0
<4>[ 64.751000] VIDEO0: stop decode
<4>[ 64.751000] sync0 1fff no decoder left in sync handling so disable
<4>[ 64.752000] sync0: was last pcroffset0 user so free it
<3>[ 65.188000] bcm_accel: invalid opcode! 00000080
<4>[ 65.348000] HDMI: CEC device open ... state is 3, flushed 0 old messages from RX fifo
<4>[ 65.349000] HDMI: CEC returned state 3
<4>[ 65.350000] HDMI: CEC state now 803
<6>[ 65.433000] bcmast: channel 0 is in normal mode now
<6>[ 65.435000] bcmast: channel 0 is sleeping now
<4>[ 65.443000] VIDEO0: dst_left, dst_top, dst_width and dst_height is 0.. reset to defaults!
<4>[ 65.444000] set current avs auto aspect to 16:9
<4>[ 65.445000] set sb to 3(1)
<4>[ 65.478000] HDMI: CEC send ok!
<4>[ 71.769000] set current avs auto aspect to 16:9
<4>[ 71.770000] set sb to 3(1)
<4>[ 71.770000] set current avs auto aspect to 16:9
<4>[ 71.771000] set sb to 3(1)
<4>[ 71.772000] set input to 0
<4>[ 71.773000] set fb to 2(-1)
<4>[ 71.773000] set current avs auto aspect to 16:9
<4>[ 71.774000] set sb to 3(1)
<4>[ 71.775000] set ac3 to downmix
<4>[ 71.777000] set aac to downmix
<4>[ 71.777000] audio ch0: streamtype set 8
<4>[ 71.778000] audio ch0: decode
<4>[ 71.782000] set mute 0 0
<4>[ 77.991000] set current avs auto aspect to 16:9
<4>[ 77.991000] set sb to 3(1)
<4>[ 77.992000] set current avs auto aspect to 16:9
<4>[ 77.993000] set sb to 3(1)
<4>[ 77.994000] set current avs auto aspect to 16:9
<4>[ 77.994000] set sb to 3(1)
<4>[ 77.997000] set current avs auto aspect to 16:9
<4>[ 77.997000] set sb to 3(1)
<4>[ 77.998000] set current avs auto aspect to 16:9
<4>[ 77.998000] set sb to 3(1)
<4>[ 77.999000] set current avs auto aspect to 16:9
<4>[ 78.000000] set sb to 3(1)
<4>[ 78.002000] set current avs auto aspect to 16:9
<4>[ 78.003000] set sb to 3(1)
<4>[ 78.003000] set current avs auto aspect to 16:9
<4>[ 78.004000] set sb to 3(1)
<4>[ 78.005000] set current avs auto aspect to 16:9
<4>[ 78.005000] set sb to 3(1)
<4>[ 78.008000] set current avs auto aspect to 16:9
<4>[ 78.009000] set sb to 3(1)
<4>[ 78.009000] set current avs auto aspect to 16:9
<4>[ 78.010000] set sb to 3(1)
<4>[ 78.011000] set current avs auto aspect to 16:9
<4>[ 78.011000] set sb to 3(1)
<4>[ 78.013000] set current avs auto aspect to 16:9
<4>[ 78.014000] set sb to 3(1)
<4>[ 78.015000] set current avs auto aspect to 16:9
<4>[ 78.015000] set sb to 3(1)
<4>[ 78.018000] set current avs auto aspect to 16:9
<4>[ 78.018000] set sb to 3(1)
<4>[ 78.019000] set current avs auto aspect to 16:9
<4>[ 78.020000] set sb to 3(1)
<4>[ 78.020000] set current avs auto aspect to 16:9
<4>[ 78.021000] set sb to 3(1)
<6>[ 79.985000] bcmast: channel 0 is in normal mode now
<4>[ 80.100000] al8304: static current limiting is enabled for 11ms only
<4>[ 80.878000] start PCR0 on dmx 0 pid:417 index 2
<4>[ 80.878000] start AUDIO0 on dmx 0 pid:be7 index 3
<4>[ 80.879000] audio ch0: xpt start
<4>[ 80.879000] audio ch0: reset GA threshold to 8ms
<4>[ 80.880000] sync0 is off so we enable it
<4>[ 80.880000] sync0: allocated pcroffset 0
<4>[ 80.881000] sync0: demux-index 0 pcr pid 417
<4>[ 80.881000] sync0: using 2 as pcr pidchannel
<4>[ 80.882000] audio ch0: AC3
<4>[ 80.883000] audio ch0: streamtype set 1
<4>[ 80.883000] audio ch0: streamtype_set: stop rave
<4>[ 80.884000] audio ch0: decode
<4>[ 80.884000] audio ch0: streamtype_set: restart rave
<4>[ 80.885000] audio ch0: decoder start
<4>[ 80.885000] audio ch0: video delay 0 (0 ms)
<4>[ 80.886000] VIDEO0: total delay: 0 (0 ms)
<4>[ 80.889000] VIDEO0: set streamtype!
<4>[ 80.890000] -> set H264
<4>[ 80.890000] -> sw rave disabled!
<4>[ 80.891000] audio ch0 delay 18000 (200 ms)
<4>[ 80.891000] VIDEO0: total delay: 18000 (200 ms)
<4>[ 80.892000] start VIDEO0 on dmx 0 pid:417 index 2
<4>[ 80.893000] VIDEO0: total delay: 18000 (200 ms)
<4>[ 80.901000] VIDEO0: start decode
<4>[ 282.754000] VIDEO0: dst_left, dst_top, dst_width and dst_height is 0.. reset to defaults!
<4>[ 282.755000] set current avs auto aspect to 16:9
<4>[ 282.756000] set sb to 3(1)
<4>[ 293.466000] using 50.00Hz as MonitorRefreshRate
<4>[ 293.467000] SET FORMAT: display[0], format='720p50'
<4>[ 293.467000] HDMI mode
<4>[ 293.468000] use EDID to detect colorspace
<4>[ 293.468000] preferred colorspace: Itu_R_BT_709
<4>[ 293.469000] using 8bit output
<4>[ 293.610000] set current avs auto aspect to 16:9
<4>[ 293.611000] set sb to 3(1)
<4>[ 293.690000] set current avs auto aspect to 16:9
<4>[ 293.691000] set sb to 3(1)
<4>[ 293.694000] set current avs auto aspect to 16:9
<4>[ 293.694000] set sb to 3(1)
<4>[ 293.695000] set current avs auto aspect to 16:9
<4>[ 293.696000] set sb to 3(1)
<4>[ 293.696000] set current avs auto aspect to 16:9
<4>[ 293.697000] set sb to 3(1)
<4>[ 316.969000] VIDEO0: dst_left, dst_top, dst_width and dst_height is 0.. reset to defaults!
<4>[ 316.971000] set current avs auto aspect to 16:9
<4>[ 316.972000] set sb to 3(1)
<4>[ 322.327000] VIDEO0: dst_left, dst_top, dst_width and dst_height is 0.. reset to defaults!
<4>[ 322.328000] set current avs auto aspect to 16:9
<4>[ 322.329000] set sb to 3(1)
<4>[ 367.499000] VIDEO0: dst_left, dst_top, dst_width and dst_height is 0.. reset to defaults!
<4>[ 367.500000] set current avs auto aspect to 16:9
<4>[ 367.501000] set sb to 3(1)
<4>[ 372.565000] stop PCR0 on dmx 0 pid:417
<4>[ 372.566000] stop VIDEO0 on dmx 0 pid:417
<4>[ 372.568000] VIDEO0: stop decode
<4>[ 372.568000] VIDEO0: set blank to 1
<4>[ 372.569000] audio ch0: use saved pts 0x18b686 (0x0) (ret 1)
<4>[ 372.570000] audio ch0: decoder stop
<4>[ 372.578000] stop AUDIO0 on dmx 0 pid:be7
<4>[ 372.579000] audio ch0: xpt stop
<4>[ 372.579000] sync0 1fff no decoder left in sync handling so disable
<4>[ 372.580000] sync0: was last pcroffset0 user so free it
<6>[ 375.603000] bcmast: channel 0 is sleeping now
<4>[ 377.645000] VIDEO0: dst_left, dst_top, dst_width and dst_height is 0.. reset to defaults!
<4>[ 377.646000] set current avs auto aspect to 16:9
<4>[ 377.647000] set sb to 3(1)
<6>[ 382.620000] bcmfb: creating surface with pixel format 0x07e48888 (BPXL_eA8_R8_G8_B8)
<4>[ 382.988000] VIDEO0: set streamtype!
<4>[ 382.988000] -> set MPEG2
<4>[ 382.988000] -> sw rave disabled!
<4>[ 382.989000] VIDEO0: set blank to 0
<4>[ 382.990000] sync0 is off so we enable it
<4>[ 382.991000] sync0: allocated pcroffset 0
<4>[ 382.991000] sync0: playback!
<4>[ 382.992000] VIDEO0: total delay: 0 (0 ms)
<4>[ 383.000000] VIDEO0: start decode
<4>[ 383.003000] VIDEO0: flush video decoder
<4>[ 383.051000] VIDEO0: first pts 0x0
<4>[ 383.168000] VIDEO0: stop decode
<4>[ 383.169000] sync0 1fff no decoder left in sync handling so disable
<4>[ 383.170000] sync0: was last pcroffset0 user so free it
<3>[ 383.615000] bcm_accel: invalid opcode! 00000080
<4>[ 383.648000] HDMI: CEC device open ... state is 3, flushed 0 old messages from RX fifo
<4>[ 383.649000] HDMI: CEC returned state 3
<4>[ 383.650000] HDMI: CEC state now 803
<6>[ 383.727000] bcmast: channel 0 is in normal mode now
<6>[ 383.728000] bcmast: channel 0 is sleeping now
<4>[ 383.736000] VIDEO0: dst_left, dst_top, dst_width and dst_height is 0.. reset to defaults!
<4>[ 383.737000] set current avs auto aspect to 16:9
<4>[ 383.738000] set sb to 3(1)
<4>[ 383.778000] HDMI: CEC send ok!
<6>[ 389.582000] bcmfb: creating surface with pixel format 0x07e48888 (BPXL_eA8_R8_G8_B8)
<4>[ 64.572000] sync0 is off so we enable it
<4>[ 64.573000] sync0: allocated pcroffset 0
<4>[ 64.573000] sync0: playback!
<4>[ 64.574000] VIDEO0: total delay: 0 (0 ms)
<4>[ 64.581000] VIDEO0: start decode
<4>[ 64.584000] VIDEO0: flush video decoder
<4>[ 64.627000] VIDEO0: first pts 0x0
<4>[ 64.751000] VIDEO0: stop decode
<4>[ 64.751000] sync0 1fff no decoder left in sync handling so disable
<4>[ 64.752000] sync0: was last pcroffset0 user so free it
<3>[ 65.188000] bcm_accel: invalid opcode! 00000080
<4>[ 65.348000] HDMI: CEC device open ... state is 3, flushed 0 old messages from RX fifo
<4>[ 65.349000] HDMI: CEC returned state 3
<4>[ 65.350000] HDMI: CEC state now 803
<6>[ 65.433000] bcmast: channel 0 is in normal mode now
<6>[ 65.435000] bcmast: channel 0 is sleeping now
<4>[ 65.443000] VIDEO0: dst_left, dst_top, dst_width and dst_height is 0.. reset to defaults!
<4>[ 65.444000] set current avs auto aspect to 16:9
<4>[ 65.445000] set sb to 3(1)
<4>[ 65.478000] HDMI: CEC send ok!
<4>[ 71.769000] set current avs auto aspect to 16:9
<4>[ 71.770000] set sb to 3(1)
<4>[ 71.770000] set current avs auto aspect to 16:9
<4>[ 71.771000] set sb to 3(1)
<4>[ 71.772000] set input to 0
<4>[ 71.773000] set fb to 2(-1)
<4>[ 71.773000] set current avs auto aspect to 16:9
<4>[ 71.774000] set sb to 3(1)
<4>[ 71.775000] set ac3 to downmix
<4>[ 71.777000] set aac to downmix
<4>[ 71.777000] audio ch0: streamtype set 8
<4>[ 71.778000] audio ch0: decode
<4>[ 71.782000] set mute 0 0
<4>[ 77.991000] set current avs auto aspect to 16:9
<4>[ 77.991000] set sb to 3(1)
<4>[ 77.992000] set current avs auto aspect to 16:9
<4>[ 77.993000] set sb to 3(1)
<4>[ 77.994000] set current avs auto aspect to 16:9
<4>[ 77.994000] set sb to 3(1)
<4>[ 77.997000] set current avs auto aspect to 16:9
<4>[ 77.997000] set sb to 3(1)
<4>[ 77.998000] set current avs auto aspect to 16:9
<4>[ 77.998000] set sb to 3(1)
<4>[ 77.999000] set current avs auto aspect to 16:9
<4>[ 78.000000] set sb to 3(1)
<4>[ 78.002000] set current avs auto aspect to 16:9
<4>[ 78.003000] set sb to 3(1)
<4>[ 78.003000] set current avs auto aspect to 16:9
<4>[ 78.004000] set sb to 3(1)
<4>[ 78.005000] set current avs auto aspect to 16:9
<4>[ 78.005000] set sb to 3(1)
<4>[ 78.008000] set current avs auto aspect to 16:9
<4>[ 78.009000] set sb to 3(1)
<4>[ 78.009000] set current avs auto aspect to 16:9
<4>[ 78.010000] set sb to 3(1)
<4>[ 78.011000] set current avs auto aspect to 16:9
<4>[ 78.011000] set sb to 3(1)
<4>[ 78.013000] set current avs auto aspect to 16:9
<4>[ 78.014000] set sb to 3(1)
<4>[ 78.015000] set current avs auto aspect to 16:9
<4>[ 78.015000] set sb to 3(1)
<4>[ 78.018000] set current avs auto aspect to 16:9
<4>[ 78.018000] set sb to 3(1)
<4>[ 78.019000] set current avs auto aspect to 16:9
<4>[ 78.020000] set sb to 3(1)
<4>[ 78.020000] set current avs auto aspect to 16:9
<4>[ 78.021000] set sb to 3(1)
<6>[ 79.985000] bcmast: channel 0 is in normal mode now
<4>[ 80.100000] al8304: static current limiting is enabled for 11ms only
<4>[ 80.878000] start PCR0 on dmx 0 pid:417 index 2
<4>[ 80.878000] start AUDIO0 on dmx 0 pid:be7 index 3
<4>[ 80.879000] audio ch0: xpt start
<4>[ 80.879000] audio ch0: reset GA threshold to 8ms
<4>[ 80.880000] sync0 is off so we enable it
<4>[ 80.880000] sync0: allocated pcroffset 0
<4>[ 80.881000] sync0: demux-index 0 pcr pid 417
<4>[ 80.881000] sync0: using 2 as pcr pidchannel
<4>[ 80.882000] audio ch0: AC3
<4>[ 80.883000] audio ch0: streamtype set 1
<4>[ 80.883000] audio ch0: streamtype_set: stop rave
<4>[ 80.884000] audio ch0: decode
<4>[ 80.884000] audio ch0: streamtype_set: restart rave
<4>[ 80.885000] audio ch0: decoder start
<4>[ 80.885000] audio ch0: video delay 0 (0 ms)
<4>[ 80.886000] VIDEO0: total delay: 0 (0 ms)
<4>[ 80.889000] VIDEO0: set streamtype!
<4>[ 80.890000] -> set H264
<4>[ 80.890000] -> sw rave disabled!
<4>[ 80.891000] audio ch0 delay 18000 (200 ms)
<4>[ 80.891000] VIDEO0: total delay: 18000 (200 ms)
<4>[ 80.892000] start VIDEO0 on dmx 0 pid:417 index 2
<4>[ 80.893000] VIDEO0: total delay: 18000 (200 ms)
<4>[ 80.901000] VIDEO0: start decode
<4>[ 282.754000] VIDEO0: dst_left, dst_top, dst_width and dst_height is 0.. reset to defaults!
<4>[ 282.755000] set current avs auto aspect to 16:9
<4>[ 282.756000] set sb to 3(1)
<4>[ 293.466000] using 50.00Hz as MonitorRefreshRate
<4>[ 293.467000] SET FORMAT: display[0], format='720p50'
<4>[ 293.467000] HDMI mode
<4>[ 293.468000] use EDID to detect colorspace
<4>[ 293.468000] preferred colorspace: Itu_R_BT_709
<4>[ 293.469000] using 8bit output
<4>[ 293.610000] set current avs auto aspect to 16:9
<4>[ 293.611000] set sb to 3(1)
<4>[ 293.690000] set current avs auto aspect to 16:9
<4>[ 293.691000] set sb to 3(1)
<4>[ 293.694000] set current avs auto aspect to 16:9
<4>[ 293.694000] set sb to 3(1)
<4>[ 293.695000] set current avs auto aspect to 16:9
<4>[ 293.696000] set sb to 3(1)
<4>[ 293.696000] set current avs auto aspect to 16:9
<4>[ 293.697000] set sb to 3(1)
<4>[ 316.969000] VIDEO0: dst_left, dst_top, dst_width and dst_height is 0.. reset to defaults!
<4>[ 316.971000] set current avs auto aspect to 16:9
<4>[ 316.972000] set sb to 3(1)
<4>[ 322.327000] VIDEO0: dst_left, dst_top, dst_width and dst_height is 0.. reset to defaults!
<4>[ 322.328000] set current avs auto aspect to 16:9
<4>[ 322.329000] set sb to 3(1)
<4>[ 367.499000] VIDEO0: dst_left, dst_top, dst_width and dst_height is 0.. reset to defaults!
<4>[ 367.500000] set current avs auto aspect to 16:9
<4>[ 367.501000] set sb to 3(1)
<4>[ 372.565000] stop PCR0 on dmx 0 pid:417
<4>[ 372.566000] stop VIDEO0 on dmx 0 pid:417
<4>[ 372.568000] VIDEO0: stop decode
<4>[ 372.568000] VIDEO0: set blank to 1
<4>[ 372.569000] audio ch0: use saved pts 0x18b686 (0x0) (ret 1)
<4>[ 372.570000] audio ch0: decoder stop
<4>[ 372.578000] stop AUDIO0 on dmx 0 pid:be7
<4>[ 372.579000] audio ch0: xpt stop
<4>[ 372.579000] sync0 1fff no decoder left in sync handling so disable
<4>[ 372.580000] sync0: was last pcroffset0 user so free it
<6>[ 375.603000] bcmast: channel 0 is sleeping now
<4>[ 377.645000] VIDEO0: dst_left, dst_top, dst_width and dst_height is 0.. reset to defaults!
<4>[ 377.646000] set current avs auto aspect to 16:9
<4>[ 377.647000] set sb to 3(1)
<6>[ 382.620000] bcmfb: creating surface with pixel format 0x07e48888 (BPXL_eA8_R8_G8_B8)
<4>[ 382.988000] VIDEO0: set streamtype!
<4>[ 382.988000] -> set MPEG2
<4>[ 382.988000] -> sw rave disabled!
<4>[ 382.989000] VIDEO0: set blank to 0
<4>[ 382.990000] sync0 is off so we enable it
<4>[ 382.991000] sync0: allocated pcroffset 0
<4>[ 382.991000] sync0: playback!
<4>[ 382.992000] VIDEO0: total delay: 0 (0 ms)
<4>[ 383.000000] VIDEO0: start decode
<4>[ 383.003000] VIDEO0: flush video decoder
<4>[ 383.051000] VIDEO0: first pts 0x0
<4>[ 383.168000] VIDEO0: stop decode
<4>[ 383.169000] sync0 1fff no decoder left in sync handling so disable
<4>[ 383.170000] sync0: was last pcroffset0 user so free it
<3>[ 383.615000] bcm_accel: invalid opcode! 00000080
<4>[ 383.648000] HDMI: CEC device open ... state is 3, flushed 0 old messages from RX fifo
<4>[ 383.649000] HDMI: CEC returned state 3
<4>[ 383.650000] HDMI: CEC state now 803
<6>[ 383.727000] bcmast: channel 0 is in normal mode now
<6>[ 383.728000] bcmast: channel 0 is sleeping now
<4>[ 383.736000] VIDEO0: dst_left, dst_top, dst_width and dst_height is 0.. reset to defaults!
<4>[ 383.737000] set current avs auto aspect to 16:9
<4>[ 383.738000] set sb to 3(1)
<4>[ 383.778000] HDMI: CEC send ok!
<6>[ 389.582000] bcmfb: creating surface with pixel format 0x07e48888 (BPXL_eA8_R8_G8_B8)
what's wrong
how can i solve it?
