Jump to content


Photo

Zgemma H9.2H dvb-t black screen


  • Please log in to reply
11 replies to this topic

#1 fatnasa

  • Member
  • 15 posts

0
Neutral

Posted 8 March 2019 - 00:17

Hello team,

 

Hope you are doing well.

 

i have just installed Zgemma H9.2H  [5 hours ago] with a dvb-t feed with a single channel "No satellite connection".

 

Currently installed image  ==== > openpli-7.0-release-h9-20190304

 

i can scan for my channel "Ch44 in my case" however every time the receiver go to standby then powered on again i just get a black screen.

 

the workarounds that i have found (every time i comeback from standby) :

 

- rescan

- full restart / enigma restart

 

so i am not sure if i am missing something, so would you please help me fixing this?

 

thanks in advance.

 



Re: Zgemma H9.2H dvb-t black screen #2 fatnasa

  • Member
  • 15 posts

0
Neutral

Posted 8 March 2019 - 00:49

also i can see in information /about menu that gstreamer version is unknow.

 

is this normal? or even related to the mentioned issue?

 

i have tried to re-flash the same image but i  came up with the same result



Re: Zgemma H9.2H dvb-t black screen #3 Pr2

  • PLi® Contributor
  • 3,365 posts

+146
Excellent

Posted 8 March 2019 - 11:04

Hi,

 

How do you stop your receiver?

 

When you press the standby button on the RCU normally everything should be written into:  /etc/enigma2/

 

But if you turn it off by the power switch, without setting it into standby with the remote control first, you probably lose your scan.

 

Thanks,

 

Pr2


NO SUPPORT by PM, it is a forum make your question public so everybody can benefit from the question/answer.
If you think that my answer helps you, you can press the up arrow in bottom right of the answer.

Wanna help with OpenPLi Translation? Please read our Wiki Information for translators

Sat: Hotbird 13.0E, Astra 19.2E, Eutelsat5A 5.0W
VU+ Solo 4K: 2*DVB-S2 + 2*DVB-C/T/T2 (used in DVB-C) & Duo 4K: 2*DVB-S2X + DVB-C (FBC)
Edision OS Mio 4K: 1*DVB-S2X + 1*DVB-C/T/T2
 


Re: Zgemma H9.2H dvb-t black screen #4 fatnasa

  • Member
  • 15 posts

0
Neutral

Posted 8 March 2019 - 11:15

thanks a lot of your reply

 

i am doing the standby by using the standby button on the RCU

 

so i am not sure what's the issue.

 

also do you know why gstreamer version is showing  unknown [in information /about menu].

 

waiting for your feedback

 

thanks in advance.



Re: Zgemma H9.2H dvb-t black screen #5 fatnasa

  • Member
  • 15 posts

0
Neutral

Posted 8 March 2019 - 12:37

one more thing to add , as when i said a workaround , i have meant or:

 

so a full reboot / enigma restart  or re-scan will get the dvb-t picture again while RCU button is used for the standby

 

hope this will help to identify the issue



Re: Zgemma H9.2H dvb-t black screen #6 fatnasa

  • Member
  • 15 posts

0
Neutral

Posted 8 March 2019 - 15:11

here is a picture while i have black screen after a regular standby (before restart or re-scan)

 

issue.jpg

 

hope this will help to identify the issue



Re: Zgemma H9.2H dvb-t black screen #7 fatnasa

  • Member
  • 15 posts

0
Neutral

Posted 8 March 2019 - 15:47

here is a screenshot of the unknown version of gstreamer

 

334.jpg



Re: Zgemma H9.2H dvb-t black screen #8 WTE

  • Senior Member
  • 656 posts

+30
Good

Posted 8 March 2019 - 17:09

Drivers in your image are one of the first releases. Update the driver in your box with the latest or try latest Openatv image.

To see if this problem is already solved.


Mut@nt HD51 STB 4K

   :rolleyes:                :rolleyes:


Re: Zgemma H9.2H dvb-t black screen #9 WanWizard

  • Forum Moderator
    PLi® Core member
  • 46,349 posts

+749
Excellent

Posted 8 March 2019 - 17:18

OpenPLi 7.1-release is scheduled towards the end of the month, and will have the latest drivers. 7.0 will update to 7.1 on a software update, no flash needed.


Currently in use: VU+Duo 4K (2xFBC S2), Amiko Viper T2C (T2), SAB Alpha Triple HD (S2+T2), Zgemma H3.T2C (T/C), Zgemma H6 (fallback), VU+Zero (fallback)

Many answers to your question can be found in our new and improved wiki.

note: I do not provide support via PM !

 


Re: Zgemma H9.2H dvb-t black screen #10 fatnasa

  • Member
  • 15 posts

0
Neutral

Posted 8 March 2019 - 17:46

so this means that the issue of the black screen is related to outdated drivers?

 

:D



Re: Zgemma H9.2H dvb-t black screen #11 WanWizard

  • Forum Moderator
    PLi® Core member
  • 46,349 posts

+749
Excellent

Posted 8 March 2019 - 17:57

I don't know, I don't have an H9.2H. But usually WTE knows what he's saying. ;)


Currently in use: VU+Duo 4K (2xFBC S2), Amiko Viper T2C (T2), SAB Alpha Triple HD (S2+T2), Zgemma H3.T2C (T/C), Zgemma H6 (fallback), VU+Zero (fallback)

Many answers to your question can be found in our new and improved wiki.

note: I do not provide support via PM !

 


Re: Zgemma H9.2H dvb-t black screen #12 fatnasa

  • Member
  • 15 posts

0
Neutral

Posted 12 March 2019 - 22:11

here is an update :lol:

 

i have configured the fallback receiver feature on h92h , and  have loaded all my satellite channels lists from my main E2 receiver .

 

once i have done this , the standby issue seems to be fixed

 

hope it will stay like this






0 user(s) are reading this topic

0 members, 0 guests, 0 anonymous users