Evening, should these changes affect the Sundtek USB tuners?
@Littlesat, Multituner issues.
Started by Huevos, 16 Mar 2019 15:55
58 replies to this topic
Re: @Littlesat, Multituner issues. #41
-
- PLi® Contributor
- 2,435 posts
+62
Good
Posted 21 December 2019 - 18:02
Re: @Littlesat, Multituner issues. #42
-
- PLi® Core member
- 56,260 posts
+691
Excellent
Posted 21 December 2019 - 19:27
They usually report as one type and are not switchable
WaveFrontier 28.2E | 23.5E | 19.2E | 16E | 13E | 10/9E | 7E | 5E | 1W | 4/5W | 15W
Re: @Littlesat, Multituner issues. #43
-
- PLi® Contributor
- 2,435 posts
+62
Good
Posted 21 December 2019 - 20:10
OK. Previously, you could configure the mode in Enigma2. That is no longer possible.
Sent from my Moto G (5S) using Forum Fiend v1.3.3.
Sent from my Moto G (5S) using Forum Fiend v1.3.3.
Re: @Littlesat, Multituner issues. #44
-
- PLi® Core member
- 56,260 posts
+691
Excellent
Posted 21 December 2019 - 20:41
I thought sundtek should be changed by the config from sundtek itself... but it might be we should do the same as we do for vu... could be sundtek is not hotswifchable.
I do not own a sundtek so I cannot troubleshoot it
I do not own a sundtek so I cannot troubleshoot it
Edited by littlesat, 21 December 2019 - 20:47.
WaveFrontier 28.2E | 23.5E | 19.2E | 16E | 13E | 10/9E | 7E | 5E | 1W | 4/5W | 15W
Re: @Littlesat, Multituner issues. #45
-
- PLi® Contributor
- 2,435 posts
+62
Good
Posted 21 December 2019 - 21:21
Both were possible as far as I know, i.e configure in Sundtek plugin as well as E2.
I have a Sundtek Hybrid tuner. I'll wait to see what Sundtek says
Sent from my Moto G (5S) using Forum Fiend v1.3.3.
I have a Sundtek Hybrid tuner. I'll wait to see what Sundtek says
Sent from my Moto G (5S) using Forum Fiend v1.3.3.
Re: @Littlesat, Multituner issues. #46
-
- Senior Member
- 2,557 posts
+756
Excellent
Posted 22 December 2019 - 10:01
Sundtek worked fine in 7.2 rc, but not in 7.0 stable.
I mentioned this earlier in the Dutch section. Answer: external software, we can't help it.
Then I mentioned it to Markus from Suntek. He wants to try to fix it this week.
Mutant HD51 via Wave T55 (5 lnb's: 9/13/19/23/28 oost) + Edision Mio 4K via Triax 1,2 meter met usals disecq.
Re: @Littlesat, Multituner issues. #47
-
- PLi® Core member
- 56,260 posts
+691
Excellent
Posted 22 December 2019 - 10:10
So in 7.2 it is fine?
WaveFrontier 28.2E | 23.5E | 19.2E | 16E | 13E | 10/9E | 7E | 5E | 1W | 4/5W | 15W
Re: @Littlesat, Multituner issues. #48
-
- Senior Member
- 2,557 posts
+756
Excellent
Posted 22 December 2019 - 10:22
So in 7.2 it is fine?
before 7.2 stable we had the release version rc. In the rc the Sundtek software worked fine. Then I installed the 7.2 stable: no signal of the cable on the Sundtek tuner.
Now I am back to 7.2 rc and wait for a fix.
I had hoped this fix would come from OpenPLi, but no... external software so no fix from the team.
Mutant HD51 via Wave T55 (5 lnb's: 9/13/19/23/28 oost) + Edision Mio 4K via Triax 1,2 meter met usals disecq.
Re: @Littlesat, Multituner issues. #49
-
- PLi® Core member
- 68,555 posts
+1,737
Excellent
Posted 22 December 2019 - 12:35
Very weird, since there is no difference between 7.2-rc and 7.2-release (that would defeat the purpose of having an RC).
Currently in use: VU+ Duo 4K (2xFBC S2), VU+ Solo 4K (1xFBC S2), uClan Usytm 4K Pro (S2+T2), Octagon SF8008 (S2+T2), Zgemma H9.2H (S2+T2)
Due to my bad health, I will not be very active at times and may be slow to respond. I will not read the forum or PM on a regular basis.
Many answers to your question can be found in our new and improved wiki.
Re: @Littlesat, Multituner issues. #50
-
- PLi® Contributor
- 6,073 posts
+257
Excellent
Posted 22 December 2019 - 12:38
Sundtek provide very good support so contact them and grant them access to your box and I am convinced that a solution will be found.
NO SUPPORT by PM, it is a forum make your question public so everybody can benefit from the question/answer.
If you think that my answer helps you, you can press the up arrow in bottom right of the answer.
Wanna help with OpenPLi Translation? Please read our Wiki Information for translators
Sat: Hotbird 13.0E, Astra 19.2E, Eutelsat5A 5.0W
VU+ Solo 4K: 2*DVB-S2 + 2*DVB-C/T/T2 (used in DVB-C) & Duo 4K: 2*DVB-S2X + DVB-C (FBC)
AB-Com: PULSe 4K 1*DVB-S2X (+ DVB-C/T/T2)
Edision OS Mio 4K: 1*DVB-S2X + 1*DVB-C/T/T2
Re: @Littlesat, Multituner issues. #51
-
- Senior Member
- 2,557 posts
+756
Excellent
Posted 22 December 2019 - 16:55
I already contacted Sundtek. Help is on it's way... perhaps Monday a solution.
@WanWizard: yes, perhaps very wierd, but the truth.
Mutant HD51 via Wave T55 (5 lnb's: 9/13/19/23/28 oost) + Edision Mio 4K via Triax 1,2 meter met usals disecq.
Re: @Littlesat, Multituner issues. #52
-
- PLi® Core member
- 68,555 posts
+1,737
Excellent
Posted 22 December 2019 - 19:19
I love to hear what the solution was.
Currently in use: VU+ Duo 4K (2xFBC S2), VU+ Solo 4K (1xFBC S2), uClan Usytm 4K Pro (S2+T2), Octagon SF8008 (S2+T2), Zgemma H9.2H (S2+T2)
Due to my bad health, I will not be very active at times and may be slow to respond. I will not read the forum or PM on a regular basis.
Many answers to your question can be found in our new and improved wiki.
Re: @Littlesat, Multituner issues. #53
-
- Senior Member
- 2,557 posts
+756
Excellent
Posted 24 December 2019 - 13:03
Today Markus of Sundtek logged in to my network and did some programmering. I don't know what he did but after reboot en setting the Sundtek tuner on (green for Cable) everything worked here.
HERE: Markus is busy and wrote that the change on my receiver is not yet avaibable for the rest of the world.
He needs more time.
You can try to install the Sundtek software once more, reboot, set your tuner correct and see what happens. Please report it here for other users.
Mutant HD51 via Wave T55 (5 lnb's: 9/13/19/23/28 oost) + Edision Mio 4K via Triax 1,2 meter met usals disecq.
Re: @Littlesat, Multituner issues. #54
-
- PLi® Contributor
- 6,073 posts
+257
Excellent
Posted 24 December 2019 - 13:09
Once again Sundtek worth its money!
NO SUPPORT by PM, it is a forum make your question public so everybody can benefit from the question/answer.
If you think that my answer helps you, you can press the up arrow in bottom right of the answer.
Wanna help with OpenPLi Translation? Please read our Wiki Information for translators
Sat: Hotbird 13.0E, Astra 19.2E, Eutelsat5A 5.0W
VU+ Solo 4K: 2*DVB-S2 + 2*DVB-C/T/T2 (used in DVB-C) & Duo 4K: 2*DVB-S2X + DVB-C (FBC)
AB-Com: PULSe 4K 1*DVB-S2X (+ DVB-C/T/T2)
Edision OS Mio 4K: 1*DVB-S2X + 1*DVB-C/T/T2
Re: @Littlesat, Multituner issues. #55
-
- PLi® Core member
- 56,260 posts
+691
Excellent
Posted 24 December 2019 - 13:36
Maybe they are trying to make it 'hotswitchable' as we offer this functionality now!
Edited by littlesat, 24 December 2019 - 13:37.
WaveFrontier 28.2E | 23.5E | 19.2E | 16E | 13E | 10/9E | 7E | 5E | 1W | 4/5W | 15W
Re: @Littlesat, Multituner issues. #56
-
- PLi® Contributor
- 2,435 posts
+62
Good
Posted 24 December 2019 - 19:35
hot-switchable has been in ATV for a longer time. Their users probably won't notice the loss because both modes are enabled by default, user only sees one mode at a time.
Let's see what transpires.
Sent from my Moto G (5S) using Forum Fiend v1.3.3.
Let's see what transpires.
Sent from my Moto G (5S) using Forum Fiend v1.3.3.
Re: @Littlesat, Multituner issues. #57
-
- PLi® Core member
- 56,260 posts
+691
Excellent
Posted 24 December 2019 - 19:59
Hot switchable is not optimized programmed in Openatv. I completely made my own design and approach which uses even less lines of code than we had before without....and then even better everything on one config page, so you see all the modes and the tuner does not pick up what is not connected.
Edited by littlesat, 24 December 2019 - 20:00.
WaveFrontier 28.2E | 23.5E | 19.2E | 16E | 13E | 10/9E | 7E | 5E | 1W | 4/5W | 15W
Re: @Littlesat, Multituner issues. #58
-
- PLi® Contributor
- 4,244 posts
+158
Excellent
Posted 26 December 2019 - 00:14
Hot switchable is not optimized programmed in Openatv. I completely made my own design and approach which uses even less lines of code than we had before without....and then even better everything on one config page, so you see all the modes and the tuner does not pick up what is not connected.
Was a lot of good work. Well done.
Re: @Littlesat, Multituner issues. #59
-
- Senior Member
- 1,297 posts
+41
Good
Posted 26 December 2019 - 10:18
Once again Sundtek worth its money!
It should be. Tuners are expensive, you can almost get new receiver for the price of sundtek tuner ...
I have old one DVB-C/T from 2012. If you want good support over the years, Sundtek is the only option.
Army MoodBlue HD skin modification by me: https://github.com/T...-MoodBlueHD-mod
Matrix10 MH-HD2 skin modification by me: https://github.com/B...-MX-HD2-OpenPli
MetrixHD skin modification by me: https://github.com/T...xHD-WPstyle-mod
Slovenian translation for OpenPLi E2: https://github.com/T...ion-for-OpenPLi
Matrix10 MH-HD2 skin modification by me: https://github.com/B...-MX-HD2-OpenPli
MetrixHD skin modification by me: https://github.com/T...xHD-WPstyle-mod
Slovenian translation for OpenPLi E2: https://github.com/T...ion-for-OpenPLi
1 user(s) are reading this topic
0 members, 1 guests, 0 anonymous users
