Jump to content


Photo

VU+ Dual Band Wireless USB 2.0 Adapter in Vu+Uno4kse

OpenPLi7.0 vu+ wifi dongle uno4kse

  • Please log in to reply
18 replies to this topic

#1 Malwurf

  • Member
  • 5 posts

0
Neutral

Posted 15 May 2019 - 22:29

Hello all,

I have a problem with VU+ Dual Band Wireless USB 2.0 Adapter in my  Vu+ uno4kse decoder and OpenPLi 7.0 stable version system.

 

When i go to the settings -> advanced settings -> network i don't see wlan settings, only lan.

 

I'm 100% sure that wifi dongle work fine.

 

here is my log from terminal after lsusb:

 

root@vuuno4kse:~# lsusb

Bus 003 Device 002: ID 0bda:0811

Bus 001 Device 001: ID 1d6b:0002

Bus 002 Device 001: ID 1d6b:0003

Bus 003 Device 001: ID 1d6b:0002

Bus 004 Device 001: ID 1d6b:0002

Bus 005 Device 001: ID 1d6b:0001

Bus 006 Device 001: ID 1d6b:0001

 

Please help me :)

Attached Files


Edited by Malwurf, 15 May 2019 - 22:30.


Re: VU+ Dual Band Wireless USB 2.0 Adapter in Vu+Uno4kse #2 Trial

  • Senior Member
  • 965 posts

+29
Good

Posted 16 May 2019 - 06:51

Hi,

are the driver for RTL8812au installed?

 

ciao



Re: VU+ Dual Band Wireless USB 2.0 Adapter in Vu+Uno4kse #3 Malwurf

  • Member
  • 5 posts

0
Neutral

Posted 16 May 2019 - 08:29

Hello,

 

Thanks for answer. Can You tell me how to install this drivers?

On settings -> plugins -> drivers i don't have this driver to install.

RTL8812au is the correct driver for this dongle?



Re: VU+ Dual Band Wireless USB 2.0 Adapter in Vu+Uno4kse #4 WanWizard

  • Forum Moderator
    PLi® Core member
  • 47,152 posts

+784
Excellent

Posted 16 May 2019 - 10:20

We don't have meta packages for wifi drivers.
 

You can either use the commandline to install them, or use the software manager, which has the option to see and install all available packages in the feed.


Currently in use: VU+Duo 4K (2xFBC S2), Amiko Viper T2C (T2), SAB Alpha Triple HD (S2+T2), Zgemma H3.T2C (T/C), Zgemma H6 (fallback), VU+Zero (fallback)

Many answers to your question can be found in our new and improved wiki.

note: I do not provide support via PM !

 


Re: VU+ Dual Band Wireless USB 2.0 Adapter in Vu+Uno4kse #5 Malwurf

  • Member
  • 5 posts

0
Neutral

Posted 16 May 2019 - 15:49

I've found RTL8812au driver the software manager, so thank you very very much!



Re: VU+ Dual Band Wireless USB 2.0 Adapter in Vu+Uno4kse #6 Malwurf

  • Member
  • 5 posts

0
Neutral

Posted 16 May 2019 - 15:53

Maybe You can help me with another thing guys? i have a qwerty remote for this decoder and.... the qwerty part not work. Do i need additional drivers for that? What is the name of this driver ?

pilot-vu-pilot-z-klawiatura_129700.jpg



Re: VU+ Dual Band Wireless USB 2.0 Adapter in Vu+Uno4kse #7 Frenske

  • Forum Moderator
    PLi® Core member
  • 21,491 posts

+178
Excellent

Posted 16 May 2019 - 16:26

I guess this RC is connected via Bluetooth? If yes, you first must connect the box with this RC. I don’t know by heart whether the Uno 4Kse also has BT.

Just checked. Default no BT. VU+ Bluetooth 4.1 USB Dongle
Mijn schotel is een T90 met 10 LNB's. Daarnaast voor de fun nog een draaibaar systeem met een Triax TD 78.

Dreamboxen heb ik niet meer. Verder nog een een VU+ duo2 met 500Gb harddisk + een VU+ Uno, Zero, Solo 4K, Ultimo 4K, Zero 4K, Uno 4Kse. + ook nog een Xtrend ET4000. Daarnaast heb ik ook nog diverse andere modellen w.o. een Formuler F4, ET8500, ET7500, Mut@nt 2400HD, Xsarius Fusion HD se en verder nog wel het e.e.a. waarmee op verzoek vanalles wordt getest. Iemand moet het tenslotte doen. ;) :)

Voor centrale opslag van media gebruik ik een Qnap 219P met tweemaal 2 Tb harddisks.

-------------------------------------------------------------------------------------------
Many answers to your question can be found in our wiki: Just one click away from this "solutioncentre".

Als ik alles al wist hoefde ik ook niets te vragen. If I had all the knowledge I had no questions at all.

Re: VU+ Dual Band Wireless USB 2.0 Adapter in Vu+Uno4kse #8 Frenske

  • Forum Moderator
    PLi® Core member
  • 21,491 posts

+178
Excellent

Posted 16 May 2019 - 16:31

Concerning the WIFI dongle. I recently installed an original WIFI dongle with external aerial on a Uno 4Kse and this worked out of the box.
Mijn schotel is een T90 met 10 LNB's. Daarnaast voor de fun nog een draaibaar systeem met een Triax TD 78.

Dreamboxen heb ik niet meer. Verder nog een een VU+ duo2 met 500Gb harddisk + een VU+ Uno, Zero, Solo 4K, Ultimo 4K, Zero 4K, Uno 4Kse. + ook nog een Xtrend ET4000. Daarnaast heb ik ook nog diverse andere modellen w.o. een Formuler F4, ET8500, ET7500, Mut@nt 2400HD, Xsarius Fusion HD se en verder nog wel het e.e.a. waarmee op verzoek vanalles wordt getest. Iemand moet het tenslotte doen. ;) :)

Voor centrale opslag van media gebruik ik een Qnap 219P met tweemaal 2 Tb harddisks.

-------------------------------------------------------------------------------------------
Many answers to your question can be found in our wiki: Just one click away from this "solutioncentre".

Als ik alles al wist hoefde ik ook niets te vragen. If I had all the knowledge I had no questions at all.

Re: VU+ Dual Band Wireless USB 2.0 Adapter in Vu+Uno4kse #9 Trial

  • Senior Member
  • 965 posts

+29
Good

Posted 16 May 2019 - 16:48

Hi,

this seems to be the old IR remote with keyboard on back. In former boxes/driver the keyboard part worked as soon as you pressed the open lock button on the bottom left. I do not know if new boxes are still supporting it.

 

ciao



Re: VU+ Dual Band Wireless USB 2.0 Adapter in Vu+Uno4kse #10 Malwurf

  • Member
  • 5 posts

0
Neutral

Posted 16 May 2019 - 19:59

Hi,

this seems to be the old IR remote with keyboard on back. In former boxes/driver the keyboard part worked as soon as you pressed the open lock button on the bottom left. I do not know if new boxes are still supporting it.

 

ciao

 

Yes this is IR remote. When I click open lock and try to write something I get big "X" icon in top right corner on the screen.



Re: VU+ Dual Band Wireless USB 2.0 Adapter in Vu+Uno4kse #11 Frenske

  • Forum Moderator
    PLi® Core member
  • 21,491 posts

+178
Excellent

Posted 16 May 2019 - 22:31

I wouldn‘t know it too as I never ever owed a device like this. Sorry I can‘t be more helpfull.
Mijn schotel is een T90 met 10 LNB's. Daarnaast voor de fun nog een draaibaar systeem met een Triax TD 78.

Dreamboxen heb ik niet meer. Verder nog een een VU+ duo2 met 500Gb harddisk + een VU+ Uno, Zero, Solo 4K, Ultimo 4K, Zero 4K, Uno 4Kse. + ook nog een Xtrend ET4000. Daarnaast heb ik ook nog diverse andere modellen w.o. een Formuler F4, ET8500, ET7500, Mut@nt 2400HD, Xsarius Fusion HD se en verder nog wel het e.e.a. waarmee op verzoek vanalles wordt getest. Iemand moet het tenslotte doen. ;) :)

Voor centrale opslag van media gebruik ik een Qnap 219P met tweemaal 2 Tb harddisks.

-------------------------------------------------------------------------------------------
Many answers to your question can be found in our wiki: Just one click away from this "solutioncentre".

Als ik alles al wist hoefde ik ook niets te vragen. If I had all the knowledge I had no questions at all.

Re: VU+ Dual Band Wireless USB 2.0 Adapter in Vu+Uno4kse #12 Erik Slagter

  • PLi® Core member
  • 45,235 posts

+496
Excellent

Posted 17 May 2019 - 09:24

The qwerty part won't and can't work due to the way VU+ has implemented it.

 

AFAIK it's has been a long time ago that this remote control was sold.


* Wavefrontier T90 with 28E/23E/19E/13E/9E/4.8E/0.8W/5W via SCR switches 2 x 2 x 6 user bands
* Ziggo digital cable TV (FTA)
I don't read PM -> if you have something to ask or to report, do it in the forum so others can benefit. I don't take freelance jobs.
Ik lees geen PM -> als je iets te vragen of te melden hebt, doe het op het forum, zodat anderen er ook wat aan hebben.

Re: VU+ Dual Band Wireless USB 2.0 Adapter in Vu+Uno4kse #13 ArtiNI

  • New Member
  • 3 posts

0
Neutral

Posted 11 July 2019 - 17:57

I've found RTL8812au driver the software manager, so thank you very very much!

 

Hi guys,

 

I have been having a issue trying to get my WiFi dongle to work with OpenPLi . As above the chipset is RTL8812AU . 

The dongle itself is GigaBlue usb wifi adapter dual band 600mbps and my receiver is Formuler F1 . 

 

I can get it to work on OpenATV however I very much prefer OpenPLi . I would greatly appreciate your help on this. 

@Malwurf how did you do it exactly ? 

 

I have tried both 6.2 and 7.0 however I'd prefer to use 6.2 since I couldn't get mgcamd to work with 7.0

 

Thanks in advance for all replies.



Re: VU+ Dual Band Wireless USB 2.0 Adapter in Vu+Uno4kse #14 littlesat

  • PLi® Core member
  • 48,310 posts

+508
Excellent

Posted 11 July 2019 - 18:04

And 7.1? And try oscam?

Edited by littlesat, 11 July 2019 - 18:05.

WaveFrontier 28.2E | 23.5E | 19.2E | 16E | 13E | 10/9E | 7E | 5E | 1W | 4/5W | 15W


Re: VU+ Dual Band Wireless USB 2.0 Adapter in Vu+Uno4kse #15 WanWizard

  • Forum Moderator
    PLi® Core member
  • 47,152 posts

+784
Excellent

Posted 11 July 2019 - 18:57

Oscam? For a wifi stick? ;)

 

@ArtiNI,

 

Unlike other images we don't preload the image with all sort of drivers virtually nobody needs, so you need to install it.

 

On  the commandline:

opkg install rtl8812au

or use plugins, software management, advanced options, package management, and select it from the list.


Currently in use: VU+Duo 4K (2xFBC S2), Amiko Viper T2C (T2), SAB Alpha Triple HD (S2+T2), Zgemma H3.T2C (T/C), Zgemma H6 (fallback), VU+Zero (fallback)

Many answers to your question can be found in our new and improved wiki.

note: I do not provide support via PM !

 


Re: VU+ Dual Band Wireless USB 2.0 Adapter in Vu+Uno4kse #16 ArtiNI

  • New Member
  • 3 posts

0
Neutral

Posted 13 July 2019 - 08:16

Hi, 

 

So I did give it a try and followed the above instructions.

 

Currently I'm on OpenPLi 7.1 stable and my wifi dongle works! 

 

Thank you so much guys!

 

I have ran into another problem. The box does not recognise my HDD. It worked ok on OpenPLi 6.2 and OpenATV so it's not a hardware issue.

 

Would be grateful for another advise. It's probably something simple as well 

 

Many Thanks!



Re: VU+ Dual Band Wireless USB 2.0 Adapter in Vu+Uno4kse #17 WanWizard

  • Forum Moderator
    PLi® Core member
  • 47,152 posts

+784
Excellent

Posted 13 July 2019 - 14:58

Is your HDD Internal? External? eSATA or USB?


Currently in use: VU+Duo 4K (2xFBC S2), Amiko Viper T2C (T2), SAB Alpha Triple HD (S2+T2), Zgemma H3.T2C (T/C), Zgemma H6 (fallback), VU+Zero (fallback)

Many answers to your question can be found in our new and improved wiki.

note: I do not provide support via PM !

 


Re: VU+ Dual Band Wireless USB 2.0 Adapter in Vu+Uno4kse #18 ArtiNI

  • New Member
  • 3 posts

0
Neutral

Posted 13 July 2019 - 23:09

Sorry , should have mentioned.

It's external USB

Re: VU+ Dual Band Wireless USB 2.0 Adapter in Vu+Uno4kse #19 WanWizard

  • Forum Moderator
    PLi® Core member
  • 47,152 posts

+784
Excellent

Posted 14 July 2019 - 13:33

USB devices are mounted on /media/usb. So if you have /media/hdd defined somewhere, it won't work.

 

OpenPLi doesn't need this hardcoding, like other images, it can find the disk and use it, no matter where it is mounted.

 

So make sure there is no hardcoding: menu - setup - system - expert settings - recording paths, and either use "<default movie location>" or /media/usb (if you want to define it explicitly).


Currently in use: VU+Duo 4K (2xFBC S2), Amiko Viper T2C (T2), SAB Alpha Triple HD (S2+T2), Zgemma H3.T2C (T/C), Zgemma H6 (fallback), VU+Zero (fallback)

Many answers to your question can be found in our new and improved wiki.

note: I do not provide support via PM !

 






Also tagged with one or more of these keywords: OpenPLi7.0, vu+, wifi dongle, uno4kse

0 user(s) are reading this topic

0 members, 0 guests, 0 anonymous users