Jump to content


Photo

skin_display - VU+ Ultimo OpenPLI 7.0


  • Please log in to reply
16 replies to this topic

#1 Dark Angel

  • Member
  • 14 posts

0
Neutral

Posted 3 June 2019 - 20:15

Hi Leute,

 

nach dem Update auf dem OpenPLI 7.0 sehe ich im VFD Display meiner Ultimo (nicht 4k) nur noch den Sendernamen.
Öffne ich die Kanalliste zeigt mir das Display plötzlich genau die Infos, die ich sonst im "normalen TV Betrieb" zu sehen gewöhnt war: Sendername, Sendungsverlaufsbalken, Sendungsname, Uhrzeit.

 

Mir kommt es vor, als ob die skin_display.xml die Einstellungen für InfoBarSummary komplett ignoriert.
 

<!-- main -->
	<screen name="InfoBarSummary" position="fill">
		<widget source="session.CurrentService" render="Label" position="top" size="*,21" font="FdLcD;20" halign="left" noWrap="1">
			<convert type="ServiceName">Name</convert>
		</widget>
		<widget source="session.Event_Now" render="Label" position="top" size="*,15" font="FdLcD;14" halign="left" noWrap="1">
			<convert type="EventName">Name</convert>
		</widget>
		<widget source="session.Event_Now" render="Progress" position="top" size="*,4" borderWidth="1" >
			<convert type="EventTime">Progress</convert>
		</widget>
		<panel position="bottom" size="*,24" name="SummaryClockPanel">
			<widget source="session.Event_Now" render="Label" position="4,0" size="40,12" font="FdLcD;12" halign="left" noWrap="1">
				<convert type="EventTime">Remaining</convert>
				<convert type="RemainingToText">NoSeconds</convert>
			</widget>
		</panel>
	</screen>

Egal was für Änderungen ich vornehme, ändert sich nach Neustart nichts an der VFD Anzeige. Selbst, wenn ich es in InfoBar_summary umbenenne, oder irgendeinen anderen "sinnlosen" Namen, das Resultat bleibt das gleiche.

Das einzige was ich mir noch vorstellen kann, dass der InfoBarSummary gar nicht der Abschnitt ist, der für die VFD Azeige, während normales TV schauen zuständig ist. Für einen kleinen Tipp, wo mein Fehler liegen könnte wäre ich euch sehr dankbar.



Re: skin_display - VU+ Ultimo OpenPLI 7.0 #2 Dark Angel

  • Member
  • 14 posts

0
Neutral

Posted 3 June 2019 - 21:20

Hab den Fehler gefunden...
Aus irgendein altes Image ist wohl die /etc/enigma2/skin_user.xml imer wieder in dem neuen Image mitgewandert, bis irgendwas im OpenPLI 7.0 mit diese angepasste InfoBarSummary nichts anzufangen wusste. Nun habe ich auf dem VFD genau das, was in der gepostete InfoBarSummary definiert ist.



Re: skin_display - VU+ Ultimo OpenPLI 7.0 #3 Dark Angel

  • Member
  • 14 posts

0
Neutral

Posted 3 June 2019 - 21:33

Auf der Suche nach der Fehlerquelle bin ich auf selbiges "Problem" gestoßen wie auch schon bei dem GigaBlue UHD Quad 4k Images 7.0 und 7.1RC:
Der renderer "LcdPicon" ist nicht vorhanden.

Gibt es seit dem OpenPLI 7.0 einen anderen renderer für die Picons Anzeige im Display, oder soll es diese Möglichkeit gar nicht mehr geben?



Re: skin_display - VU+ Ultimo OpenPLI 7.0 #4 Frenske

  • Forum Moderator
    PLi® Core member
  • 27,379 posts

+393
Excellent

Posted 4 June 2019 - 06:49

Ich habe es mitlerweile im internen Teil gemeldet.

Mijn schotel is een T90 met 10 LNB's. Daarnaast voor de fun nog een draaibaar systeem met een Triax TD 78.

Dreamboxen heb ik niet meer echt actief. Verder heb ik ook nog een een VU+ duo2 met 500Gb harddisk + een VU+ Uno, Zero, Solo 4K, Ultimo 4K, Zero 4K, Uno 4Kse. + ook nog een Xtrend ET7x00. Daarnaast heb ik ook nog diverse andere modellen w.o. een Formuler F4, ET8500, ET7500, Mut@nt 2400HD, Xsarius Fusion HD se en verder nog wel het e.e.a. waarmee op verzoek vanalles wordt getest. Iemand moet het tenslotte doen. ;) :)
Los van de eerder genoemde modellen heb ik nog wel een rits aan testsamples als Mut@nt 2400HD, HD60, GB UE4K, GB Trio4K, Maxitec Multibox combo en Twin, Octagon sf8008, sf8008 mini en last but nog least enkele modellen van het Grieks Duitse Edision.

Voor centrale opslag van media gebruik ik een Qnap 219P 
met tweemaal 2 Tb harddisks + een Synology DS414 met 12 Tb Totale opslag.

-------------------------------------------------------------------------------------------
Many answers to your question can be found in our wiki: Just one click away from this "solutioncentre".

Als ik alles al wist hoefde ik ook niets te vragen. If I had all the knowledge I had no questions at all.


Re: skin_display - VU+ Ultimo OpenPLI 7.0 #5 littlesat

  • PLi® Core member
  • 56,123 posts

+685
Excellent

Posted 4 June 2019 - 06:55

Lcdpicon we indeed do not have and it is also not required... looks like custom skin_display issue. When a change does not has results there do you have lcd4linux installed?

Edited by littlesat, 4 June 2019 - 06:56.

WaveFrontier 28.2E | 23.5E | 19.2E | 16E | 13E | 10/9E | 7E | 5E | 1W | 4/5W | 15W


Re: skin_display - VU+ Ultimo OpenPLI 7.0 #6 Dark Angel

  • Member
  • 14 posts

0
Neutral

Posted 4 June 2019 - 10:01

Vielen Dank.
Das ursprüngliche Problem ist ja zum Glück schon gelöst.
Ich weiss nicht, ob LCD4Linux irgendwann mal installiert war.
Ich habe vor Jahre das VTI Image mit zusätzliche VFD Skins, danach OpenPLI 4 und jetzt OpenPLI 7.0 und immer die gesicherte Kofiguration eingespielt. Erst seit OpenPLI 7.0 hat die Displayanzeige nicht mehr richtig funktioniert.

@littlesat: soll das heissen, dass in Zukunft bei OpenPLI keine Picons Anzeige im Display mehr möglich sein wird?


Thank you very much, sir.
Fortunately, the original problem has already been solved.
I don't know if LCD4Linux was installed at any time.
Years ago I installed the VTI image with additional VFD skins, then OpenPLI 4 and now OpenPLI 7.0 and always the saved configuration. Only since OpenPLI 7.0 the display didn't work properly anymore.

@littlesat: does this mean that in the future OpenPLI will no longer be able to show Picons in the display?

Translated with www.DeepL.com/Translator



Re: skin_display - VU+ Ultimo OpenPLI 7.0 #7 littlesat

  • PLi® Core member
  • 56,123 posts

+685
Excellent

Posted 4 June 2019 - 10:36

Our standard skin_display.xml should work... the one you showed above does indeed not include any picon...


WaveFrontier 28.2E | 23.5E | 19.2E | 16E | 13E | 10/9E | 7E | 5E | 1W | 4/5W | 15W


Re: skin_display - VU+ Ultimo OpenPLI 7.0 #8 Dark Angel

  • Member
  • 14 posts

0
Neutral

Posted 4 June 2019 - 10:44

The standard skin_display.xml works.
But... what doing if i want show picons in display?
Without the LcdPicon render there is no way... :-(


Gesendet von iPhone mit Tapatalk

Re: skin_display - VU+ Ultimo OpenPLI 7.0 #9 littlesat

  • PLi® Core member
  • 56,123 posts

+685
Excellent

Posted 4 June 2019 - 10:47

You do not need the LcdPicon renderer.. with the standard skin_display the normal picon renderer should be sufficiant (when you have a full color display)


WaveFrontier 28.2E | 23.5E | 19.2E | 16E | 13E | 10/9E | 7E | 5E | 1W | 4/5W | 15W


Re: skin_display - VU+ Ultimo OpenPLI 7.0 #10 Dark Angel

  • Member
  • 14 posts

0
Neutral

Posted 4 June 2019 - 10:58

Thank you.

I will test this on my Gigablue UHD Quad 4k with OpenPLI 7.1RC


Gesendet von iPhone mit Tapatalk

Re: skin_display - VU+ Ultimo OpenPLI 7.0 #11 Dark Angel

  • Member
  • 14 posts

0
Neutral

Posted 4 June 2019 - 22:09

@littlesat: on Gigablue UHD Quad 4k does not work.

render="LcdPicon" >>> Display is black. No Informations

render="Picon" >>> All text lines working, but no Picon



Re: skin_display - VU+ Ultimo OpenPLI 7.0 #12 littlesat

  • PLi® Core member
  • 56,123 posts

+685
Excellent

Posted 5 June 2019 - 06:44

You need to use render picon... LcdPicon is wrong.... here ultimo4k picon occurs on display with default skin_display.xml so it should also work with ultimo when skin_display is correct.

WaveFrontier 28.2E | 23.5E | 19.2E | 16E | 13E | 10/9E | 7E | 5E | 1W | 4/5W | 15W


Re: skin_display - VU+ Ultimo OpenPLI 7.0 #13 Dark Angel

  • Member
  • 14 posts

0
Neutral

Posted 5 June 2019 - 07:23

Can you, or any one post the default skin_display.xml from Ultimo4k image?

Re: skin_display - VU+ Ultimo OpenPLI 7.0 #14 littlesat

  • PLi® Core member
  • 56,123 posts

+685
Excellent

Posted 5 June 2019 - 09:12

Does the Ultimo (non 4K) has a color or black/white screen?

 

When it has a black/white screen you indeed need to have a separate black/white picon set + LcdPicon renderer... 

All standard skin_display.xml files could be found here:

https://github.com/O...ee/develop/data


Edited by littlesat, 5 June 2019 - 09:14.

WaveFrontier 28.2E | 23.5E | 19.2E | 16E | 13E | 10/9E | 7E | 5E | 1W | 4/5W | 15W


Re: skin_display - VU+ Ultimo OpenPLI 7.0 #15 Dark Angel

  • Member
  • 14 posts

0
Neutral

Posted 6 June 2019 - 21:34

Thank you, littlesat

Re: skin_display - VU+ Ultimo OpenPLI 7.0 #16 Dark Angel

  • Member
  • 14 posts

0
Neutral

Posted 7 June 2019 - 21:12

The problem with the icon display of the Quad UHD 4k is the set icon size.
I use the "srp-full.220x132-190x102.dark.on.transparent" picons from feed.

 

If I set the original picon size (220x134) the picons are shown in the display, but are very large and not transparent.

<widget source="session.CurrentService" render="Picon" position="10,10" zPosition="1" size="220,132" alphatest="on">
	<convert type="ServiceName">Reference</convert>
</widget>

If I set the picon size to 190x102 they will not be shown on the display again.

<widget source="session.CurrentService" render="Picon" position="10,10" zPosition="1" size="190,102" alphatest="on">
	<convert type="ServiceName">Reference</convert>
</widget>


Edited by Dark Angel, 7 June 2019 - 21:12.


Re: skin_display - VU+ Ultimo OpenPLI 7.0 #17 littlesat

  • PLi® Core member
  • 56,123 posts

+685
Excellent

Posted 7 June 2019 - 22:21

Try alphatest blend instead of on

Edited by littlesat, 7 June 2019 - 22:21.

WaveFrontier 28.2E | 23.5E | 19.2E | 16E | 13E | 10/9E | 7E | 5E | 1W | 4/5W | 15W



0 user(s) are reading this topic

0 members, 0 guests, 0 anonymous users