You have to be clear, as this is about power-on of the box (after a power cut, which is equal to flipping the switch of plugging in the power cable).
HDMI-CEC + short power outage
Re: HDMI-CEC + short power outage #21
Posted 15 July 2019 - 20:26
Currently in use: VU+ Duo 4K (2xFBC S2), VU+ Solo 4K (1xFBC S2), uClan Usytm 4K Pro (S2+T2), Octagon SF8008 (S2+T2), Zgemma H9.2H (S2+T2)
Due to my bad health, I will not be very active at times and may be slow to respond. I will not read the forum or PM on a regular basis.
Many answers to your question can be found in our new and improved wiki.
Re: HDMI-CEC + short power outage #22
Posted 15 July 2019 - 21:16
Mijn schotel is een T90 met 10 LNB's. Daarnaast voor de fun nog een draaibaar systeem met een Triax TD 78.
Dreamboxen heb ik niet meer echt actief. Verder heb ik ook nog een een VU+ duo2 met 500Gb harddisk + een VU+ Uno, Zero, Solo 4K, Ultimo 4K, Zero 4K, Uno 4Kse. + ook nog een Xtrend ET7x00. Daarnaast heb ik ook nog diverse andere modellen w.o. een Formuler F4, ET8500, ET7500, Mut@nt 2400HD, Xsarius Fusion HD se en verder nog wel het e.e.a. waarmee op verzoek vanalles wordt getest. Iemand moet het tenslotte doen.
Los van de eerder genoemde modellen heb ik nog wel een rits aan testsamples als Mut@nt 2400HD, HD60, GB UE4K, GB Trio4K, Maxitec Multibox combo en Twin, Octagon sf8008, sf8008 mini en last but nog least enkele modellen van het Grieks Duitse Edision.
Voor centrale opslag van media gebruik ik een Qnap 219P met tweemaal 2 Tb harddisks + een Synology DS414 met 12 Tb Totale opslag.
-------------------------------------------------------------------------------------------
Many answers to your question can be found in our wiki: Just one click away from this "solutioncentre".
Als ik alles al wist hoefde ik ook niets te vragen. If I had all the knowledge I had no questions at all.
Re: HDMI-CEC + short power outage #23
Posted 15 July 2019 - 21:57
yes
No need to apologize.
On my main TV HDMI-CEC works great on my LG OLED. TV power’s up when starting the box and shuts down when putting the box to standby.
Yes, my turn on and then does not go to standby, the box goes to standby
Edited by caligula73, 15 July 2019 - 22:01.
HD51 (2xFBC S2) - 14w+4w+1w+5e+9e+13e+16e+19e+23e+42e+45e+51e+52e+53e+55e+56e+60e+75e+80e+90e
Re: HDMI-CEC + short power outage #24
Posted 16 July 2019 - 09:06
Attached Files
Edited by caligula73, 16 July 2019 - 09:07.
HD51 (2xFBC S2) - 14w+4w+1w+5e+9e+13e+16e+19e+23e+42e+45e+51e+52e+53e+55e+56e+60e+75e+80e+90e
Re: HDMI-CEC + short power outage #25
Re: HDMI-CEC + short power outage #26
Re: HDMI-CEC + short power outage #27
Re: HDMI-CEC + short power outage #28
Re: HDMI-CEC + short power outage #29
Posted 16 July 2019 - 11:02
This is a log output and mode deep standbay
yes, only one box.
I'm going to add a new option to HDMI-CEC plugin.
"Do not turn on the TV" (yes/no), after a power loss, when "Wakeup TV from standby"/"Regard deep standby as standby" as enabled.
Yes! of course, add - we will test
HD51 (2xFBC S2) - 14w+4w+1w+5e+9e+13e+16e+19e+23e+42e+45e+51e+52e+53e+55e+56e+60e+75e+80e+90e
Re: HDMI-CEC + short power outage #30
Posted 17 July 2019 - 10:00
I'm going to add a new option to HDMI-CEC plugin.
"Do not turn on the TV" (yes/no), after a power loss, when "Wakeup TV from standby"/"Regard deep standby as standby" as enabled.
After a detailed study, it turned out that this is not possible.
No trigger for this except VU + receivers.
VU + work RTC time if box in deep standby.When power loss,then this time is reset(1970).
Edited by Dimitrij, 17 July 2019 - 10:02.
GigaBlue UHD Quad 4K /Lunix3-4K/Solo 4K
Re: HDMI-CEC + short power outage #31
Re: HDMI-CEC + short power outage #32
Posted 1 August 2019 - 17:45
The kld-28 button came. installed on the box. now hdmi-cec works correctly when power failure(TV does not turn on).
... but this is not a good solution for openpli
Attached Files
Edited by caligula73, 1 August 2019 - 17:46.
HD51 (2xFBC S2) - 14w+4w+1w+5e+9e+13e+16e+19e+23e+42e+45e+51e+52e+53e+55e+56e+60e+75e+80e+90e
Re: HDMI-CEC + short power outage #33
Posted 2 August 2019 - 11:46
If you take your receiver RCU then turn it on and then turn off, you will see that the Panasonic TV won't turn off.
And I think that it is what happens with a power outage, the TV turn on but ignore the turn off signal because it is still starting.
If you want to fix this, you need to add a minimal delay between turn on / turn off signal to TV (or just turn off to TV), so when HDMI-CEC needs to send a turn off signal it will wait for this delay before sending.
So this can leave time for TV to turn on and then accept the turn off signal.
Edited by Pr2, 2 August 2019 - 11:47.
NO SUPPORT by PM, it is a forum make your question public so everybody can benefit from the question/answer.
If you think that my answer helps you, you can press the up arrow in bottom right of the answer.
Wanna help with OpenPLi Translation? Please read our Wiki Information for translators
Sat: Hotbird 13.0E, Astra 19.2E, Eutelsat5A 5.0W
VU+ Solo 4K: 2*DVB-S2 + 2*DVB-C/T/T2 (used in DVB-C) & Duo 4K: 2*DVB-S2X + DVB-C (FBC)
AB-Com: PULSe 4K 1*DVB-S2X (+ DVB-C/T/T2)
Edision OS Mio 4K: 1*DVB-S2X + 1*DVB-C/T/T2
Re: HDMI-CEC + short power outage #34
Posted 2 August 2019 - 13:27
I can confirm I have that with my Panasonic too, but only with some boxes. For example, the Duo 4K needs the delay, the HD2400 and the SAB AlphaTriple don;t.
Currently in use: VU+ Duo 4K (2xFBC S2), VU+ Solo 4K (1xFBC S2), uClan Usytm 4K Pro (S2+T2), Octagon SF8008 (S2+T2), Zgemma H9.2H (S2+T2)
Due to my bad health, I will not be very active at times and may be slow to respond. I will not read the forum or PM on a regular basis.
Many answers to your question can be found in our new and improved wiki.
Re: HDMI-CEC + short power outage #35
Posted 3 August 2019 - 17:32
Edited by Pr2, 3 August 2019 - 17:32.
NO SUPPORT by PM, it is a forum make your question public so everybody can benefit from the question/answer.
If you think that my answer helps you, you can press the up arrow in bottom right of the answer.
Wanna help with OpenPLi Translation? Please read our Wiki Information for translators
Sat: Hotbird 13.0E, Astra 19.2E, Eutelsat5A 5.0W
VU+ Solo 4K: 2*DVB-S2 + 2*DVB-C/T/T2 (used in DVB-C) & Duo 4K: 2*DVB-S2X + DVB-C (FBC)
AB-Com: PULSe 4K 1*DVB-S2X (+ DVB-C/T/T2)
Edision OS Mio 4K: 1*DVB-S2X + 1*DVB-C/T/T2
Re: HDMI-CEC + short power outage #36
0 user(s) are reading this topic
0 members, 0 guests, 0 anonymous users