14 replies to this topic

[ataman]

Hello
how can I set permanently channel number at lcd screen and disable bright air logo ?
Are there any plugins to change it ?
Thanks

Edited by ataman, 29 July 2019 - 14:52.

[Pr2]

Hi,
Disable the Air logo unfortunately no.
And I don't think that we can keep the channel number instead of time.
Pr2

[mrvica]

is that a 4way 7segment display, can you check if you have this device on the box /dev/dbox/oled0

[ataman]

I can`t edit or open this file

[mrvica]

you don´t need to edit or open this file (device), just see if it is present

 

dir /dev/dbox/oled0
crw-rw----    1 root     root       10,  58 Jan  1  1970 /dev/dbox/oled0

 

or

 

ls -al /dev/dbox/oled0
crw-rw----    1 root     root       10,  58 Jan  1  1970 /dev/dbox/oled0
 

 

Edited by mrvica, 29 July 2019 - 22:10.

[alabama]

The bright air logo is only a surface LED with mask

[mrvica]

just put a piece of adhesive black tape on it, I assume you have the device /dev/dbox/oled0 , copy this to ../SystemPlugins on your box, restart E2

 

 

Attached Files

•  vfd.zip   1.8KB   35 downloads

[FlexMcMurphy]

What does that plugin do exactly? I think it just makes the clock appear on the front panel but does nothing to the annoying logo?

 

Flex

[mrvica]

I now own h7 myself, for h7 you don´t need the plugin, for the logo led I just cut the circuit path, if you want only channel number in 7segment display edit this in /usr/share/enigma2/skin_text.xml

instead of

 

<!-- main-->
 <screen name="InfoBarSummary" position="0,0" size="1,1">
  <widget source="session.CurrentService" render="Label" position="0,0" size="1,1">
   <convert type="VfdDisplay"></convert>
  </widget>
 </screen>

 

put this

 

<!-- main-->
        <screen name="InfoBarSummary" position="0,0" size="1,1">
                <widget source="session.CurrentService" render="Label" position="0,0" size="1,1">
                        <convert type="VfdDisplay">Number</convert>
                </widget>
        </screen>

Edited by mrvica, 24 April 2020 - 19:03.

[s3n0]

Isn't it in the OpenPLi MENU? I mean here:
MENU -> Settings -> System -> Expert -> LCD / LED / display settings -> Brigthness
If you can't find it there, then probably the driver for Linux systems supplied by the device manufacturer does not allow you to change the brightness of the logo on the front panel. Or it is possible, but less likely, that the OpenPLi team of developers has not implemented this option yet .

[WanWizard]

These things are controlled by the existence of a proc node in /proc/stb), so unless they've suddenly invented a new one, it should be covered.

 

The H9 (the only box I have here) doesn't have Brightless for the logo, only an on/off switch for standby and deep-standby.

 

The H9 does have a /proc/stb/lcd/oled_brightness node, which is weird because no OLED display. Changing it doesn't do anything, so it's not logo related.

Edited by WanWizard, 25 April 2020 - 12:04.

[ims]

If you want for H7 permanent channel number - add there in /usr/share/enigma2/display/skin_default/skin_display.xml  under "main" line <convert type="VfdDisplay"></convert> to <convert type="VfdDisplay">Number</convert>

[mrvica]

your solution may be better, won´t be overwritten during an update

[ims]

your solution may be better, won´t be overwritten during an update

You can add it this file to backup ...

 

and if you want display notice about recording, add to "main" and to "standby" this lines:

        <widget source="session.RecordState" render="Label" text=" 00 " position="0,0" size="1,1">
            <convert type="ConditionalShowHide">Blink,2000</convert>
        </widget>

For standby change it to 3000

 

And better could be text="    "

Edited by ims, 25 April 2020 - 15:10.

[ataman]

 

your solution may be better, won´t be overwritten during an update

You can add it this file to backup ...

 

and if you want display notice about recording, add to "main" and to "standby" this lines:

        <widget source="session.RecordState" render="Label" text=" 00 " position="0,0" size="1,1">
            <convert type="ConditionalShowHide">Blink,2000</convert>
        </widget>

For standby change it to 3000

 

And better could be text="    "

 

Please give lines only for standby because I do not know where to change to 3000