Dm8000 openpli7 bestaat er een plugin die...
birdybird 28 Aug 2019
Ik zoek eigenlijk een plugin die de hd uitleest
Mbt het aantal uren dat hij powerup is een soort smart utility. Bestaat die ?
Mbt het aantal uren dat hij powerup is een soort smart utility. Bestaat die ?
WanWizard 28 Aug 2019
Ja. En die tool heet ook nog eens smart.
root@vuduo4k:~# opkg install smartmontools Installing smartmontools (5.42) on root Downloading http://xxxxx/feeds/openpli-develop/armv7ahf-neon/smartmontools_5.42-r1.0.1_armv7ahf-neon.ipk. Configuring smartmontools. root@vuduo4k:~# smartctl -a /dev/sdb smartctl 5.42 2011-10-20 r3458 [armv7l-linux-4.1.45-1.17] (local build) Copyright (C) 2002-11 by Bruce Allen, [url=http://smartmontools.sourceforge.net]http://smartmontools.sourceforge.net[/url] === START OF INFORMATION SECTION === Device Model: ST1500LM006 HN-M151RAD Serial Number: S35UJ9AFA04664 LU WWN Device Id: 5 0004cf 20e4d6a63 Firmware Version: 2BC10001 User Capacity: 1,500,301,910,016 bytes [1.50 TB] Sector Sizes: 512 bytes logical, 4096 bytes physical Device is: Not in smartctl database [for details use: -P showall] ATA Version is: 8 ATA Standard is: ATA-8-ACS revision 6 Local Time is: Wed Aug 28 13:00:51 2019 IST SMART support is: Available - device has SMART capability. SMART support is: Enabled === START OF READ SMART DATA SECTION === SMART overall-health self-assessment test result: PASSED General SMART Values: Offline data collection status: (0x00) Offline data collection activity was never started. Auto Offline Data Collection: Disabled. Self-test execution status: ( 0) The previous self-test routine completed without error or no self-test has ever been run. Total time to complete Offline data collection: (17520) seconds. Offline data collection capabilities: (0x51) SMART execute Offline immediate. No Auto Offline data collection support. Suspend Offline collection upon new command. No Offline surface scan supported. Self-test supported. No Conveyance Self-test supported. Selective Self-test supported. SMART capabilities: (0x0003) Saves SMART data before entering power-saving mode. Supports SMART auto save timer. Error logging capability: (0x01) Error logging supported. General Purpose Logging supported. Short self-test routine recommended polling time: ( 2) minutes. Extended self-test routine recommended polling time: ( 255) minutes. SCT capabilities: (0x003d) SCT Status supported. SCT Error Recovery Control supported. SCT Feature Control supported. SCT Data Table supported. SMART Attributes Data Structure revision number: 16 Vendor Specific SMART Attributes with Thresholds: ID# ATTRIBUTE_NAME FLAG VALUE WORST THRESH TYPE UPDATED WHEN_FAILED RAW_VALUE 1 Raw_Read_Error_Rate 0x002f 100 100 051 Pre-fail Always - 2 2 Throughput_Performance 0x0027 252 252 000 Pre-fail Always - 0 3 Spin_Up_Time 0x0023 091 090 025 Pre-fail Always - 2872 4 Start_Stop_Count 0x0032 093 093 000 Old_age Always - 7774 5 Reallocated_Sector_Ct 0x0033 252 252 010 Pre-fail Always - 0 7 Seek_Error_Rate 0x002f 252 252 051 Pre-fail Always - 0 8 Seek_Time_Performance 0x0025 252 252 015 Pre-fail Offline - 0 9 Power_On_Hours 0x0032 100 100 000 Old_age Always - 10627 10 Spin_Retry_Count 0x0033 252 252 051 Pre-fail Always - 0 12 Power_Cycle_Count 0x0032 100 100 000 Old_age Always - 981 181 Program_Fail_Cnt_Total 0x0022 100 100 000 Old_age Always - 5727823 183 Runtime_Bad_Block 0x0032 252 252 010 Old_age Always - 0 184 End-to-End_Error 0x0033 252 252 097 Pre-fail Always - 0 186 Unknown_Attribute 0x0032 252 252 000 Old_age Always - 0 187 Reported_Uncorrect 0x0032 252 252 000 Old_age Always - 0 188 Command_Timeout 0x0032 252 252 000 Old_age Always - 0 190 Airflow_Temperature_Cel 0x0002 070 052 040 Old_age Always - 30 (Min/Max 13/48) 191 G-Sense_Error_Rate 0x0022 100 100 000 Old_age Always - 29 192 Power-Off_Retract_Count 0x0022 100 100 000 Old_age Always - 468 193 Load_Cycle_Count 0x0032 025 025 000 Old_age Always - 757828 194 Temperature_Celsius 0x0002 064 052 000 Old_age Always - 30 (Min/Max 13/48) 195 Hardware_ECC_Recovered 0x003a 100 100 000 Old_age Always - 0 196 Reallocated_Event_Count 0x0032 252 252 000 Old_age Always - 0 197 Current_Pending_Sector 0x0032 252 252 000 Old_age Always - 0 198 Offline_Uncorrectable 0x0030 252 252 000 Old_age Offline - 0 199 UDMA_CRC_Error_Count 0x0036 200 200 000 Old_age Always - 0 200 Multi_Zone_Error_Rate 0x002a 100 100 000 Old_age Always - 136 SMART Error Log Version: 1 No Errors Logged SMART Self-test log structure revision number 1 Num Test_Description Status Remaining LifeTime(hours) LBA_of_first_error # 1 Short offline Completed without error 00% 5026 - # 2 Offline Interrupted (host reset) 90% 4380 - # 3 Extended captive Self-test routine in progress 90% 4380 - # 4 Extended offline Aborted by host 90% 4380 - # 5 Short offline Completed without error 00% 6 - Note: selective self-test log revision number (0) not 1 implies that no selective self-test has ever been run SMART Selective self-test log data structure revision number 0 Note: revision number not 1 implies that no selective self-test has ever been run SPAN MIN_LBA MAX_LBA CURRENT_TEST_STATUS 1 0 0 Completed [00% left] (0-65535) 2 0 0 Not_testing 3 0 0 Not_testing 4 0 0 Not_testing 5 0 0 Not_testing Selective self-test flags (0x0): After scanning selected spans, do NOT read-scan remainder of disk. If Selective self-test is pending on power-up, resume after 0 minute delay. root@vuduo4k:~#
WanWizard 29 Aug 2019
Ik heb meerdere devices aangesloten.
Het is altijd random welke als eerste gevonden wordt en "sda" genoemd wordt, in dit geval was mijn USB stick sda, en mijn lokale disk sdb.