256 replies to this topic

[DeBeek]

Vuduo4k

 

Compleet schone installatie gedaan,  alles werkt prima echter....

 

In de movielijst kan je functies van de gekleurde knoppen wijzigen in het menu van de movielijst

vervolgens druk je op bevestigen en de knoppen hebben de nieuwe functie.

 

Als je nu de lijst sluit en weer opent dan staan de oude (originele) instellingen er weer..

het gaat om de rood omlijnde knoppen

 

 1.jpg   207.13KB   5 downloads   2.jpg   207.67KB   5 downloads   3.jpg   173.81KB   5 downloads

[Frenske]

Net ook even gecontroleerd en kan het zoals verwacht na jouw melding bevestigen.

Als je echter na het bevestigen direct enigma herstart wordt de wijziging wél opgeslagen. 

[DeBeek]

Inderdaad dan werkt het wel.

 

Is echter nooit zo geweest..  (misschien werkte het wel op de DM-8000 ?) 10 jaar gehad..

[littlesat]

Dit stond nog op mijn (vergeten) to do lijst. Is inmiddels opgelost vanaf morgen.

 

https://github.com/O...b62e4dabe57da50

 

@wanwizard sorry we need to rebase rc7.2 again....

De fix voor constant weergegeven ‘please wait’ melding had blijkbaar een side effect...

[DeBeek]

Aha,

[DeBeek]

Kon niet wachten,  .py bestand gedownload, box herstart en het werkt weer...    Top...

[WanWizard]

@wanwizard sorry we need to rebase rc7.2 again....

 

Check...

[1ER]

Ik heb toch nog wel een bugje gevonden in 7.2 i.c.m. mijn Vu+ Ultimo 4k.

Als ik de laatste built uit het menu laad (draai nu met 7.1) en doorloop na het flashen de wizzard dan gebeurt het volgende:

Tuner A instellen gaat normaal. Bij het instellen van tuner B selecteer ik de 2e kabel van LNB1. Op de 2e regel in dat scherm verschijnt al een cryptische tekst wat niet veel goeds belooft. Als ik daarna op OK druk dan crasht de ontvanger een geeft een green screen.

Iemand een idee hoe ik dit kan oplossen?

 

Thanks and keep up the good work!!

 

Ed.

[littlesat]

Eerste oplossing is de log file en/of foto van het het groene scherm hier posten. Net nog mijn  ultimo4K hier geconfigureerd vanaf het begin en ik zie hier geen issue...

Edited by littlesat, 7 November 2019 - 13:14.

[1ER]

Onderstaand het log file.

  

 

OpenPLi Enigma2 crash log

 

crashdate=do nov  7 16:57:44 2019

compiledate=Nov  1 2019

skin=PLi-FullNightHD/skin.xml

sourcedate=2019-11-01

branch=rc

rev=40b7fd1

component=Enigma2

 

stbmodel=ultimo4k

stbmodel=dm8000

kernelcmdline=root=/dev/mmcblk0p4 rootfstype=ext4 rootflags=data=journal rootwait rw coherent_pool=2M vmalloc=622m bmem=630m@394m bmem=383m@1665m bmem=443m@2625m

nimsockets=NIM Socket 0:

imageissue=openpli 7.2-rc %h

 

 

REMOVE Peer vuultimo4k

REMOVE Peer vuultimo4k

REMOVE Peer vuultimo4k

Traceback (most recent call last):

  File "/usr/lib/enigma2/python/Components/ActionMap.py", line 77, in action

  File "/usr/lib/enigma2/python/Components/ActionMap.py", line 57, in action

  File "/usr/lib/enigma2/python/Screens/Wizard.py", line 377, in ok

  File "/usr/lib/enigma2/python/Screens/Satconfig.py", line 333, in run

  File "/usr/lib/enigma2/python/Components/NimManager.py", line 164, in update

TypeError: int() argument must be a string or a number, not 'generator'

 

 

dmesg

 

<6>[    0.000000] Booting Linux on physical CPU 0x0

<5>[    0.000000] Linux version 3.14.28-1.12 (oe-user@oe-host) (gcc version 6.3.0 (GCC) ) #1 SMP Thu Sep 5 16:11:12 CEST 2019

<6>[    0.000000] CPU: ARMv7 Processor [420f00f3] revision 3 (ARMv7), cr=30c7387d

<6>[    0.000000] CPU: PIPT / VIPT nonaliasing data cache, PIPT instruction cache

<6>[    0.000000] Machine model: ULTIMO4K

<6>[    0.000000] moving dtb from 0x0000000007628000 to 0x0000000000842510

<6>[    0.000000] bmem: Reserved 630 MiB at 0x0000000018a00000

<6>[    0.000000] bmem: Reserved 383 MiB at 0x0000000068100000

<6>[    0.000000] bmem: Reserved 443 MiB at 0x00000000a4100000

<6>[    0.000000] cma: Reserved 16 MiB at 0x0000000017000000

<6>[    0.000000] Memory policy: Data cache writealloc

<7>[    0.000000] On node 0 totalpages: 786432

<7>[    0.000000]   Normal zone: 772 pages used for memmap

<7>[    0.000000]   Normal zone: 0 pages reserved

<7>[    0.000000]   Normal zone: 98816 pages, LIFO batch:31

<7>[    0.000000]   HighMem zone: 5372 pages used for memmap

<7>[    0.000000]   HighMem zone: 687616 pages, LIFO batch:31

<6>[    0.000000] MCP: Enabling write pairing

<6>[    0.000000] PERCPU: Embedded 8 pages/cpu @d81b0000 s8768 r8192 d15808 u32768

<7>[    0.000000] pcpu-alloc: s8768 r8192 d15808 u32768 alloc=8*4096

<7>[    0.000000] pcpu-alloc: [0] 0 [0] 1 [0] 2 [0] 3 

<4>[    0.000000] Built 1 zonelists in Zone order, mobility grouping on.  Total pages: 785660

<5>[    0.000000] Kernel command line: root=/dev/mmcblk0p4 rootfstype=ext4 rootflags=data=journal rootwait rw coherent_pool=2M vmalloc=622m bmem=630m@394m bmem=383m@1665m bmem=443m@2625m

<6>[    0.000000] PID hash table entries: 2048 (order: 1, 8192 bytes)

<6>[    0.000000] Dentry cache hash table entries: 65536 (order: 6, 262144 bytes)

<6>[    0.000000] Inode-cache hash table entries: 32768 (order: 5, 131072 bytes)

<4>[    0.000000] Memory: 1600512K/3145728K available (5764K kernel code, 332K rwdata, 1880K rodata, 252K init, 188K bss, 1528832K reserved, 16384K cma-reserved, 1255412K highmem)

<5>[    0.000000] Virtual kernel memory layout:

<5>[    0.000000]     vector  : 0xffff0000 - 0xffff1000   (   4 kB)

<5>[    0.000000]     fixmap  : 0xfff00000 - 0xfffe0000   ( 896 kB)

<5>[    0.000000]     vmalloc : 0xd8800000 - 0xff000000   ( 616 MB)

<5>[    0.000000]     lowmem  : 0xc0000000 - 0xd8200000   ( 386 MB)

<5>[    0.000000]     pkmap   : 0xbfe00000 - 0xc0000000   (   2 MB)

<5>[    0.000000]     modules : 0xbf000000 - 0xbfe00000   (  14 MB)

<5>[    0.000000]       .text : 0xc0008000 - 0xc077f4c4   (7646 kB)

<5>[    0.000000]       .init : 0xc0780000 - 0xc07bf240   ( 253 kB)

<5>[    0.000000]       .data : 0xc07c0000 - 0xc0813398   ( 333 kB)

<5>[    0.000000]        .bss : 0xc08133a0 - 0xc0842510   ( 189 kB)

<6>[    0.000000] Hierarchical RCU implementation.

<6>[    0.000000] NR_IRQS:16 nr_irqs:16 16

<6>[    0.000000] irq_brcmstb_l2: registered L2 intc (mem: 0xfc403000, parent irq: 94)

<6>[    0.000000] irq_brcmstb_l2: registered L2 intc (mem: 0xfc3e1000, parent irq: 64)

<6>[    0.000000] irq_brcmstb_l2: registered L2 intc (mem: 0xfc410640, parent irq: 96)

<6>[    0.000000] irq_brcmstb_l2: registered L2 intc (mem: 0xfc4d1200, parent irq: 48)

<6>[    0.000000] Architected cp15 timer(s) running at 27.00MHz (virt).

<6>[    0.000004] sched_clock: 56 bits at 27MHz, resolution 37ns, wraps every 2545165795328ns

<6>[    0.000010] Switching to timer-based delay loop

<6>[    0.000277] Console: colour dummy device 80x30

<6>[    0.000297] Calibrating delay loop (skipped), value calculated using timer frequency.. 54.00 BogoMIPS (lpj=27000)

<6>[    0.000306] pid_max: default: 32768 minimum: 301

<6>[    0.000403] Mount-cache hash table entries: 1024 (order: 0, 4096 bytes)

<6>[    0.000408] Mountpoint-cache hash table entries: 1024 (order: 0, 4096 bytes)

<6>[    0.005844] CPU: Testing write buffer coherency: ok

<6>[    0.006050] CPU0: update cpu_power 1024

<6>[    0.006056] CPU0: thread -1, cpu 0, socket 0, mpidr 80000000

<6>[    0.006190] Setting up static identity map for 0x580240 - 0x580298

<4>[    0.008596] CPU1: Booted secondary processor

<6>[    0.008614] CPU1: update cpu_power 1024

<6>[    0.008617] CPU1: thread -1, cpu 1, socket 0, mpidr 80000001

<4>[    0.009264] CPU2: Booted secondary processor

<6>[    0.009275] CPU2: update cpu_power 1024

<6>[    0.009278] CPU2: thread -1, cpu 2, socket 0, mpidr 80000002

<4>[    0.009893] CPU3: Booted secondary processor

<6>[    0.009904] CPU3: update cpu_power 1024

<6>[    0.009907] CPU3: thread -1, cpu 3, socket 0, mpidr 80000003

<6>[    0.009988] Brought up 4 CPUs

<6>[    0.010006] SMP: Total of 4 processors activated.

<6>[    0.010010] CPU: All CPU(s) started in SVC mode.

<6>[    0.010360] devtmpfs: initialized

<6>[    0.013957] VFP support v0.3: implementor 42 architecture 4 part 00 variant 0 rev 0

<6>[    0.014958] regulator-dummy: no parameters

<6>[    0.015158] NET: Registered protocol family 16

<6>[    0.017313] DMA: preallocated 2048 KiB pool for atomic coherent allocations

<6>[    0.018126] cpuidle: using governor ladder

<6>[    0.018132] cpuidle: using governor menu

<4>[    0.021289] irq: no irq domain found for /rdb/interrupt-controller@f040a780 !

<4>[    0.021431] irq: no irq domain found for /rdb/interrupt-controller@f0417280 !

<4>[    0.025343] irq: no irq domain found for /rdb/interrupt-controller@f03e1a00 !

<6>[    0.025606] syscon f0404000.syscon: regmap [mem 0xf0404000-0xf040451b] registered

<6>[    0.026381] syscon f0404100.syscon: regmap [mem 0xf0404100-0xf040415b] registered

<6>[    0.026527] syscon f040415c.syscon: regmap [mem 0xf040415c-0xf040419b] registered

<6>[    0.026670] syscon f0410700.syscon: regmap [mem 0xf0410700-0xf041070b] registered

<6>[    0.026818] syscon f041070c.syscon: regmap [mem 0xf041070c-0xf0410713] registered

<6>[    0.026971] syscon f1101004.syscon: regmap [mem 0xf1101004-0xf1101403] registered

<6>[    0.027109] syscon f1181004.syscon: regmap [mem 0xf1181004-0xf1181403] registered

<6>[    0.027268] syscon f1201004.syscon: regmap [mem 0xf1201004-0xf1201403] registered

<6>[    0.027401] syscon f0404080.syscon: regmap [mem 0xf0404080-0xf0404083] registered

<6>[    0.027535] syscon f04040a4.syscon: regmap [mem 0xf04040a4-0xf04040a7] registered

<6>[    0.027670] syscon f03e0154.syscon: regmap [mem 0xf03e0154-0xf03e0157] registered

<6>[    0.027931] syscon f03e0354.syscon: regmap [mem 0xf03e0354-0xf03e0357] registered

<6>[    0.028067] syscon f03e0400.syscon: regmap [mem 0xf03e0400-0xf03e0403] registered

<4>[    0.028632] irq: no irq domain found for /rdb/interrupt-controller@f0417280 !

<6>[    0.029179] syscon f03e2400.syscon: regmap [mem 0xf03e2400-0xf03e27ff] registered

<6>[    0.029329] syscon f0452000.syscon: regmap [mem 0xf0452000-0xf04520ff] registered

<6>[    0.029627] No ATAGs?

<6>[    0.029646] hw-breakpoint: found 5 (+1 reserved) breakpoint and 4 watchpoint registers.

<6>[    0.029651] hw-breakpoint: maximum watchpoint size is 8 bytes.

<6>[    0.029782] Broadcom Brahma-B15 readahead cache at: 0xfc3e2478

<6>[    0.044932] bio: create slab <bio-0> at 0

<5>[    0.045644] SCSI subsystem initialized

<7>[    0.045930] libata version 3.00 loaded.

<6>[    0.046344] usbcore: registered new interface driver usbfs

<6>[    0.046422] usbcore: registered new interface driver hub

<6>[    0.046516] usbcore: registered new device driver usb

<6>[    0.046648] Linux video capture interface: v2.00

<6>[    0.046864] pps_core: LinuxPPS API ver. 1 registered

<6>[    0.046869] pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giometti <giometti@linux.it>

<6>[    0.046921] PTP clock support registered

<6>[    0.047463] Advanced Linux Sound Architecture Driver Initialized.

<6>[    0.048187] cfg80211: Calling CRDA to update world regulatory domain

<6>[    0.048643] brcm-pci f0460000.pcie: adjusting to legacy (broken) pcie DT

<6>[    0.048818] brcm-pci f0490000.pcie: adjusting to legacy (broken) pcie DT

<6>[    0.149136] brcm-pci f0460000.pcie: link down

<6>[    0.249158] brcm-pci f0490000.pcie: link down

<6>[    0.249213] Switched to clocksource arch_sys_counter

<5>[    0.249411] FS-Cache: Loaded

<4>[    0.258616] thermal thermal_zone0: failed to read out thermal zone 0

<6>[    0.258707] NET: Registered protocol family 2

<6>[    0.259106] TCP established hash table entries: 4096 (order: 2, 16384 bytes)

<6>[    0.259133] TCP bind hash table entries: 4096 (order: 3, 32768 bytes)

<6>[    0.259176] TCP: Hash tables configured (established 4096 bind 4096)

<6>[    0.259263] TCP: reno registered

<6>[    0.259270] UDP hash table entries: 256 (order: 1, 8192 bytes)

<6>[    0.259282] UDP-Lite hash table entries: 256 (order: 1, 8192 bytes)

<6>[    0.259398] NET: Registered protocol family 1

<6>[    0.259588] RPC: Registered named UNIX socket transport module.

<6>[    0.259593] RPC: Registered udp transport module.

<6>[    0.259596] RPC: Registered tcp transport module.

<6>[    0.259599] RPC: Registered tcp NFSv4.1 backchannel transport module.

<7>[    0.259605] PCI: CLS 0 bytes, default 64

<6>[    0.259850] hw perfevents: enabled with ARMv7 Cortex-A15 PMU driver, 7 counters available

<6>[    0.261107] futex hash table entries: 1024 (order: 4, 65536 bytes)

<4>[    0.261821] bounce pool size: 64 pages

<5>[    0.262305] NFS: Registering the id_resolver key type

<5>[    0.262330] Key type id_resolver registered

<5>[    0.262335] Key type id_legacy registered

<6>[    0.262344] nfs4filelayout_init: NFSv4 File Layout Driver Registering...

<6>[    0.262349] Installing knfsd (copyright © 1996 okir@monad.swb.de).

<6>[    0.262687] fuse init (API version 7.22)

<6>[    0.262835] msgmni has been set to 706

<6>[    0.263546] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 252)

<6>[    0.263554] io scheduler noop registered

<6>[    0.263558] io scheduler deadline registered

<6>[    0.263578] io scheduler cfq registered (default)

<6>[    0.263786] brcm-gisb-arb f0400000.gisb-arb: registered mem: fc400000, irqs: 258, 259

<6>[    0.294642] brcm-waketimer f0417580.waketimer: registered, with irq 260

<6>[    0.294917] Serial: 8250/16550 driver, 4 ports, IRQ sharing disabled

<6>[    0.296310] f040ab00.serial: ttyS0 at MMIO 0xf040ab00 (irq = 107, base_baud = 5062500) is a 16550A

<6>[    1.116669] console [ttyS0] enabled

<6>[    1.120579] f040ab40.serial: ttyS1 at MMIO 0xf040ab40 (irq = 108, base_baud = 5062500) is a 16550A

<6>[    1.129926] f040ab80.serial: ttyS2 at MMIO 0xf040ab80 (irq = 109, base_baud = 5062500) is a 16550A

<6>[    1.142475] loop: module loaded

<3>[    1.146224] ahci brcmstb-ahci.0: can't get clock

<6>[    1.150933] ahci brcmstb-ahci.0: SSS flag set, parallel bus scan disabled

<6>[    1.168224] ahci brcmstb-ahci.0: AHCI 0001.0300 32 slots 2 ports 6 Gbps 0x3 impl platform mode

<6>[    1.176855] ahci brcmstb-ahci.0: flags: 64bit ncq sntf stag pm clo pmp slum part 

<6>[    1.186500] scsi0 : ahci_platform

<6>[    1.190150] scsi1 : ahci_platform

<6>[    1.193700] ata1: SATA max UDMA/133 mmio [mem 0xf045a000-0xf045aa9b] port 0x100 irq 62

<6>[    1.201634] ata2: SATA max UDMA/133 mmio [mem 0xf045a000-0xf045aa9b] port 0x180 irq 62

<6>[    1.210825] spi_brcmstb f03e3400.spi: 1-lane output, 3-byte address

<6>[    1.217225] spi_brcmstb f03e3400.spi: master is unqueued, this is deprecated

<4>[    1.224542] m25p80 spi32766.0: found mx25l3255e, expected m25p80

<6>[    1.230567] m25p80 spi32766.0: mx25l3255e (4096 Kbytes)

<5>[    1.235825] 5 ofpart partitions found on MTD device spi32766.0

<5>[    1.241670] Creating 5 MTD partitions on "spi32766.0":

<5>[    1.246822] 0x000000000000-0x000000200000 : "flash0.bolt"

<5>[    1.252904] 0x000000200000-0x000000210000 : "flash0.macadr"

<5>[    1.259118] 0x000000210000-0x000000220000 : "flash0.nvram"

<5>[    1.265258] 0x000000220000-0x000000230000 : "flash0.devtree"

<5>[    1.271567] 0x000000000000-0x000000400000 : "flash0"

<6>[    1.278254] libphy: Fixed MDIO Bus: probed

<6>[    1.284818] libphy: unimac MII bus: probed

<6>[    1.293168] unimac-mdio f0b403c0.mdio: Broadcom UniMAC MDIO bus at 0xfcb403c0

<6>[    1.301141] brcm-systemport f04a0000.ethernet: Broadcom SYSTEMPORTv 1.00 at 0xfc4a0000 (irqs: 54, 55, TXQs: 32, RXQs: 1)

<6>[    1.314711] e1000e: Intel® PRO/1000 Network Driver - 2.3.2-k

<6>[    1.318233] ata1: SATA link down (SStatus 0 SControl 300)

<6>[    1.325964] e1000e: Copyright© 1999 - 2013 Intel Corporation.

<6>[    1.332455] xhci-brcm: xHCI BRCM driver

<6>[    1.336383] xhci-brcm f0471000.xhci_v2: xHCI Host Controller

<6>[    1.342224] xhci-brcm f0471000.xhci_v2: new USB bus registered, assigned bus number 1

<6>[    1.350361] xhci-brcm f0471000.xhci_v2: irq 115, io mem 0xf0471000

<6>[    1.357083] hub 1-0:1.0: USB hub found

<3>[    1.360863] hub 1-0:1.0: config failed, hub doesn't have any ports! (err -19)

<6>[    1.368129] xhci-brcm f0471000.xhci_v2: xHCI Host Controller

<6>[    1.373943] xhci-brcm f0471000.xhci_v2: new USB bus registered, assigned bus number 2

<6>[    1.382292] hub 2-0:1.0: USB hub found

<6>[    1.386071] hub 2-0:1.0: 2 ports detected

<6>[    1.390503] ehci-brcm: EHCI BRCM driver

<6>[    1.394419] ehci-brcm f0470300.ehci_v2: EHCI Host Controller

<6>[    1.400254] ehci-brcm f0470300.ehci_v2: new USB bus registered, assigned bus number 3

<6>[    1.418229] ehci-brcm f0470300.ehci_v2: irq 111, io mem 0xf0470300

<6>[    1.430217] ehci-brcm f0470300.ehci_v2: USB 2.0 started, EHCI 1.00

<6>[    1.436907] hub 3-0:1.0: USB hub found

<6>[    1.439224] ata2: SATA link down (SStatus 0 SControl 300)

<6>[    1.446092] hub 3-0:1.0: 1 port detected

<6>[    1.450240] ehci-brcm f0470500.ehci_v2: EHCI Host Controller

<6>[    1.456073] ehci-brcm f0470500.ehci_v2: new USB bus registered, assigned bus number 4

<6>[    1.474032] ehci-brcm f0470500.ehci_v2: irq 112, io mem 0xf0470500

<6>[    1.486217] ehci-brcm f0470500.ehci_v2: USB 2.0 started, EHCI 1.00

<6>[    1.492911] hub 4-0:1.0: USB hub found

<6>[    1.496689] hub 4-0:1.0: 1 port detected

<6>[    1.500839] ehci-brcm f0480300.ehci_v2: EHCI Host Controller

<6>[    1.506677] ehci-brcm f0480300.ehci_v2: new USB bus registered, assigned bus number 5

<6>[    1.524629] ehci-brcm f0480300.ehci_v2: irq 117, io mem 0xf0480300

<6>[    1.536216] ehci-brcm f0480300.ehci_v2: USB 2.0 started, EHCI 1.00

<6>[    1.542893] hub 5-0:1.0: USB hub found

<6>[    1.546675] hub 5-0:1.0: 1 port detected

<6>[    1.550820] ehci-brcm f0480500.ehci_v2: EHCI Host Controller

<6>[    1.556652] ehci-brcm f0480500.ehci_v2: new USB bus registered, assigned bus number 6

<6>[    1.574601] ehci-brcm f0480500.ehci_v2: irq 118, io mem 0xf0480500

<6>[    1.586216] ehci-brcm f0480500.ehci_v2: USB 2.0 started, EHCI 1.00

<6>[    1.592882] hub 6-0:1.0: USB hub found

<6>[    1.596660] hub 6-0:1.0: 1 port detected

<6>[    1.600915] ohci-brcm: OHCI BRCM driver

<6>[    1.604830] ohci-brcm f0470400.ohci_v2: BRCM OHCI controller

<6>[    1.610644] ohci-brcm f0470400.ohci_v2: new USB bus registered, assigned bus number 7

<6>[    1.618522] ohci-brcm f0470400.ohci_v2: irq 113, io mem 0xf0470400

<6>[    1.679680] hub 7-0:1.0: USB hub found

<6>[    1.683461] hub 7-0:1.0: 1 port detected

<6>[    1.687593] ohci-brcm f0470600.ohci_v2: BRCM OHCI controller

<6>[    1.693421] ohci-brcm f0470600.ohci_v2: new USB bus registered, assigned bus number 8

<6>[    1.701312] ohci-brcm f0470600.ohci_v2: irq 114, io mem 0xf0470600

<6>[    1.762688] hub 8-0:1.0: USB hub found

<6>[    1.766467] hub 8-0:1.0: 1 port detected

<6>[    1.770611] ohci-brcm f0480400.ohci_v2: BRCM OHCI controller

<6>[    1.776452] ohci-brcm f0480400.ohci_v2: new USB bus registered, assigned bus number 9

<6>[    1.784329] ohci-brcm f0480400.ohci_v2: irq 119, io mem 0xf0480400

<6>[    1.845680] hub 9-0:1.0: USB hub found

<6>[    1.849459] hub 9-0:1.0: 1 port detected

<6>[    1.853594] ohci-brcm f0480600.ohci_v2: BRCM OHCI controller

<6>[    1.854236] usb 5-1: new high-speed USB device number 2 using ehci-brcm

<6>[    1.866043] ohci-brcm f0480600.ohci_v2: new USB bus registered, assigned bus number 10

<6>[    1.874012] ohci-brcm f0480600.ohci_v2: irq 120, io mem 0xf0480600

<6>[    1.935688] hub 10-0:1.0: USB hub found

<6>[    1.939553] hub 10-0:1.0: 1 port detected

<6>[    1.943903] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver

<6>[    1.950453] ehci-pci: EHCI PCI platform driver

<6>[    1.955001] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver

<6>[    1.961207] ohci-pci: OHCI PCI platform driver

<6>[    1.965963] usbcore: registered new interface driver usb-storage

<6>[    1.972158] mousedev: PS/2 mouse device common for all mice

<6>[    1.977978] hub 5-1:1.0: USB hub found

<6>[    1.978196] i2c /dev entries driver

<6>[    1.978616] IR NEC protocol handler initialized

<6>[    1.978618] IR RC5(x) protocol handler initialized

<6>[    1.978620] IR RC6 protocol handler initialized

<6>[    1.978622] IR JVC protocol handler initialized

<6>[    1.978623] IR Sony protocol handler initialized

<6>[    1.978624] IR RC5 (streamzap) protocol handler initialized

<6>[    1.978626] IR SANYO protocol handler initialized

<6>[    1.978628] IR MCE Keyboard/mouse protocol handler initialized

<6>[    1.978980] brcmstb_thermal f04d1500.thermal: registered AVS TMON of-sensor driver

<4>[    1.979188] cpufreq_cpu0: failed to get cpu0 regulator: -19

<6>[    1.979477] sdhci: Secure Digital Host Controller Interface driver

<6>[    1.979479] sdhci: Copyright© Pierre Ossman

<6>[    1.979480] sdhci-pltfm: SDHCI platform and OF driver helper

<6>[    1.980598] mmc0: no vqmmc regulator found

<6>[    1.980602] mmc0: no vmmc regulator found

<6>[    2.011213] mmc0: SDHCI controller on f03e0200.sdhci [f03e0200.sdhci] using ADMA

<6>[    2.071313] hub 5-1:1.0: 4 ports detected

<6>[    2.073627] usbcore: registered new interface driver usbhid

<6>[    2.073629] usbhid: USB HID core driver

<6>[    2.084865] TCP: cubic registered

<6>[    2.088222] NET: Registered protocol family 17

<5>[    2.092798] Distributed Switch Architecture driver version 0.1

<6>[    2.100727] sys0[0]: detected a Broadcom Starfighter 2 switch

<6>[    2.106690] Starfighter 2 top: 4.00, core: 2.00 base: 0xfcb00000, IRQs: 56, 57

<6>[    2.116100] libphy: dsa slave smi: probed

<6>[    2.170858] mmc0: BKOPS_EN bit is not set

<6>[    2.179216] f0b403c0.mdio:05: Broadcom BCM7445 PHY revision: 0x10, patch: 3

<6>[    2.187375] mmc0: new high speed MMC card at address 0001

<6>[    2.193064] mmcblk0: mmc0:0001 4FPD3R 3.64 GiB 

<6>[    2.197696] mmcblk0boot0: mmc0:0001 4FPD3R partition 1 4.00 MiB

<6>[    2.203712] mmcblk0boot1: mmc0:0001 4FPD3R partition 2 4.00 MiB

<6>[    2.209726] mmcblk0rpmb: mmc0:0001 4FPD3R partition 3 512 KiB

<6>[    2.218664]  mmcblk0: p1 p2 p3 p4

<6>[    2.223681]  mmcblk0boot1: unknown partition table

<6>[    2.229191]  mmcblk0boot0: unknown partition table

<6>[    2.390350] usb 5-1.1: new high-speed USB device number 3 using ehci-brcm

<6>[    2.413372] attached PHY at address 5 [Broadcom BCM7445]

<3>[    2.419148] net eth0: PHY already attached

<5>[    2.423470] Key type dns_resolver registered

<5>[    2.427850] Registering SWP/SWPB emulation handler

<6>[    2.433081] regulator-dummy: disabling

<6>[    2.440088] ALSA device list:

<6>[    2.443074]   No soundcards found.

<4>[    2.447247] EXT4-fs: Warning: mounting with data=journal disables delayed allocation and O_DIRECT support!

<6>[    2.561352] usb 5-1.2: new full-speed USB device number 4 using ehci-brcm

<5>[    3.006500] random: nonblocking pool is initialized

<6>[    5.618304] EXT4-fs (mmcblk0p4): 16 orphan inodes deleted

<6>[    5.623727] EXT4-fs (mmcblk0p4): recovery complete

<6>[    5.643193] EXT4-fs (mmcblk0p4): mounted filesystem with journalled data mode. Opts: data=journal

<6>[    5.652117] VFS: Mounted root (ext4 filesystem) on device 179:4.

<6>[    5.658215] devtmpfs: mounted

<6>[    5.661397] Freeing unused kernel memory: 252K (c0780000 - c07bf000)

<6>[    5.915795] EXT4-fs (mmcblk0p4): re-mounted. Opts: nodelalloc,data=journal

<6>[    6.900594] usbcore: registered new interface driver dbus_usbdev

<6>[    6.909481] usb 5-1.1: USB disconnect, device number 3

<4>[    6.989688] bcm_event: module license 'Proprietary' taints kernel.

<4>[    6.995893] Disabling lock debugging due to kernel taint

<6>[    7.095367] usb 5-1.1: new high-speed USB device number 5 using ehci-brcm

<4>[    7.191826] Dongle Host Driver, version 1.363.110.16 (r620666)

<4>[    7.191826] Compiled in  on Oct 27 2016 at 18:59:23

<4>[    7.208274] Register interface [wlan3]  MAC: 00:90:4c:11:22:33

<4>[    7.208274] 

<6>[    8.982229] libphy: fixed-0:00 - Link is Up - 1000/Full

<6>[   11.566784] DVB: registering new adapter (_vuplus_ultimo4k_)

<4>[   11.881291] bcm7444: hotplug_callback(): 

<4>[   11.881291] Hotplug - status.connected 1:0:1

<4>[   11.888300] bcm7444: hotplug_callback(): 

<4>[   11.888300] Hotplug - connecting HDMI to display 0xe

<6>[   12.091211] brcm_demux_init: $Id: bcm_demux.c,v 0.7 $

<4>[   12.200221] [MPVR]: >> misc_pvr_init

<4>[   12.206517] [VID]: 6bcm7335_video_init

<4>[   12.258704] [AUD]: 6bcm7335_audio_init

<4>[   12.264563] [AUD]: >> bcm_audio_capture_init

<4>[   12.272647] fe_cap.qam : 0, fe_cap.ofd : 0, fe_cap.satellite:1

<6>[   12.292760] BRCM brcm_dvb0: DVB: registering adapter 0 frontend 0 (Vuplus FE)...

<4>[   12.300729] fe_cap.qam : 0, fe_cap.ofd : 0, fe_cap.satellite:1

<6>[   12.316624] BRCM brcm_dvb0: DVB: registering adapter 0 frontend 0 (Vuplus FE)...

<4>[   12.324695] fe_cap.qam : 0, fe_cap.ofd : 0, fe_cap.satellite:1

<6>[   12.342326] BRCM brcm_dvb0: DVB: registering adapter 0 frontend 0 (Vuplus FE)...

<4>[   12.350354] fe_cap.qam : 0, fe_cap.ofd : 0, fe_cap.satellite:1

<6>[   12.367721] BRCM brcm_dvb0: DVB: registering adapter 0 frontend 0 (Vuplus FE)...

<4>[   12.376084] fe_cap.qam : 0, fe_cap.ofd : 0, fe_cap.satellite:1

<6>[   12.392145] BRCM brcm_dvb0: DVB: registering adapter 0 frontend 0 (Vuplus FE)...

<4>[   12.400672] fe_cap.qam : 0, fe_cap.ofd : 0, fe_cap.satellite:1

<6>[   12.416670] BRCM brcm_dvb0: DVB: registering adapter 0 frontend 0 (Vuplus FE)...

<4>[   12.424619] fe_cap.qam : 0, fe_cap.ofd : 0, fe_cap.satellite:1

<6>[   12.440410] BRCM brcm_dvb0: DVB: registering adapter 0 frontend 0 (Vuplus FE)...

<4>[   12.448724] fe_cap.qam : 0, fe_cap.ofd : 0, fe_cap.satellite:1

<6>[   12.465972] BRCM brcm_dvb0: DVB: registering adapter 0 frontend 0 (Vuplus FE)...

<4>[   12.473773] -----------8 slot is empty ----------------

<4>[   12.479082] -----------9 slot is empty ----------------

<4>[   12.484591] -----------10 slot is empty ----------------

<4>[   12.489926] -----------11 slot is empty ----------------

<4>[   12.495277] -----------12 slot is empty ----------------

<4>[   12.500818] -----------13 slot is empty ----------------

<4>[   12.506156] -----------14 slot is empty ----------------

<4>[   12.511509] -----------15 slot is empty ----------------

<4>[   12.517039] -----------16 slot is empty ----------------

<4>[   12.522374] -----------17 slot is empty ----------------

<4>[   12.527737] bcm7444: bcm7335_frontend_init(): vtuner1 : 9 m_nfbc=0 m_fbc=8

<4>[   12.553572] BKNI_P_GetTrackAllocEntry_resize: resizing from 5376->8704

<4>[   12.561914] BKNI_Malloc(linuxkernel) top users:

<4>[   12.561914]     blocks,   bytes, filename:line

<4>[   12.570907]        930,  201624, BSEAV/lib/utils/balloc.c:31

<6>[   12.616723] input: dreambox advanced remote control (native) as /devices/virtual/input/input0

<6>[   12.631167] [LCD]: registered

<4>[   12.966584] GPIO Init... 

<6>[   12.979423] [CI]: registered ci0

<6>[   12.982957] [CI]: registered ci1

<6>[   12.992939] [CI]: CI interface initialised

<6>[   12.992939] 

<6>[   13.007493] [DFP]: registered dbox fp

<6>[   13.014816] [SC]: registered sci0

<6>[   13.018699] [SC]: registered sci1

<4>[   13.177218] system_time_set wakeup mode get 

<4>[   13.241220] system_time_set wakeup mode get 0xc2

<4>[   13.492696] BKNI_P_GetTrackAllocEntry_resize: resizing from 8704->14080

<4>[   13.501307] BKNI_Malloc(linuxkernel) top users:

<4>[   13.501307]     blocks,   bytes, filename:line

<4>[   13.510300]       2303,  501508, BSEAV/lib/utils/balloc.c:31

<4>[   13.642383] FPGA Version 0x11

<6>[   13.776302] wakeup_drv: Initializing wakeup driver

<6>[   13.781399] wakeup_drv: Initialization complete

<6>[   15.566290] libphy: f0b403c0.mdio:05 - Link is Down

<6>[   16.584297] libphy: f0b403c0.mdio:05 - Link is Up - 100/Full

<6>[   17.706051] NET: Registered protocol family 10

<6>[   17.874753] Bluetooth: Core ver 2.18

<6>[   17.878863] NET: Registered protocol family 31

<6>[   17.883341] Bluetooth: HCI device and connection manager initialized

<6>[   17.889727] Bluetooth: HCI socket layer initialized

<6>[   17.894643] Bluetooth: L2CAP socket layer initialized

<6>[   17.899944] Bluetooth: SCO socket layer initialized

<4>[   19.175198] [VID]: VIDEO_SET_STREAMTYPE 1 

<4>[   19.179355] [VID]: VIDEO_SELECT_SOURCE 1  0

<4>[   19.183618] [VID]: VIDEO_PLAY 1  5 0

<4>[   19.192737] [VID]: VIDEO_CONTINUE 1  1 

<4>[   19.196648] [VID]: VIDEO_CLEAR_BUFFER 1  1 0

<4>[   19.358660] [VID]: VIDEO_STOP 0  1

<4>[   19.363213] [VID]: VIDEO_SELECT_SOURCE 0  0

<4>[   22.493164] [AUD]: AUDIO_SET_MUTE 0 

<4>[   22.497112] [AUD]: AUDIO_SET_MIXER -834912632 

<4>[   22.501612] [AUD]: AUDIO_SET_MIXER : amixl 0, amixr 0

<4>[   22.506686] [AUD]: AUDIO_SET_MIXER : next left volume 0, right volume 0

<4>[   22.513315] [AUD]: AUDIO_SET_MIXER : next left volume -70, right volume -70

<4>[   25.606766] [AUD]: AUDIO_SET_MIXER -834912632 

<4>[   25.611249] [AUD]: AUDIO_SET_MIXER : amixl 32, amixr 32

<4>[   25.616499] [AUD]: AUDIO_SET_MIXER : next left volume -70, right volume -70

<4>[   25.623500] [AUD]: AUDIO_SET_MIXER : next left volume -2355, right volume -2355

<4>[   39.693107] [VID]: VIDEO_SET_STREAMTYPE 1 

<4>[   39.697281] [VID]: VIDEO_SELECT_SOURCE 1  0

<4>[   39.701534] [VID]: VIDEO_PLAY 1  5 0

<4>[   39.710399] [VID]: VIDEO_CONTINUE 1  1 

<4>[   39.714300] [VID]: VIDEO_CLEAR_BUFFER 1  1 0

<4>[   39.876032] [VID]: VIDEO_STOP 0  1

<4>[   39.880835] [VID]: VIDEO_SELECT_SOURCE 0  0

<4>[   42.315305] [AUD]: AUDIO_SET_MUTE 0 

<4>[   42.319480] [AUD]: AUDIO_SET_MIXER -859652472 

<4>[   42.323948] [AUD]: AUDIO_SET_MIXER : amixl 0, amixr 0

<4>[   42.329024] [AUD]: AUDIO_SET_MIXER : next left volume -2355, right volume -2355

<4>[   42.336381] [AUD]: AUDIO_SET_MIXER : next left volume -70, right volume -70

<4>[   43.728554] [AUD]: AUDIO_SET_MIXER -859652472 

<4>[   43.733037] [AUD]: AUDIO_SET_MIXER : amixl 32, amixr 32

<4>[   43.738302] [AUD]: AUDIO_SET_MIXER : next left volume -70, right volume -70

<4>[   43.745533] [AUD]: AUDIO_SET_MIXER : next left volume -2355, right volume -2355

[littlesat]

Welke tuners heb je? En in welk slot?
Heb je iets met satposdepends gedaan
Wat is de config (screenshot) van de eerste tuner?

Edited by littlesat, 7 November 2019 - 20:22.

[1ER]

Ik heb 1x DVB-S2 FBC Dual tuner in het eerste slot.

De kreet satposdepends zegt me niets dus je kan aannemen dat ik daar niets mee heb gedaan.

Ik krijg m'n foto's helaas niet geplakt hier dus ik type de instellingen maar even uit:

 

Tuner A

Configuratiemodus: Geavanceerd

Satelliet: 23.5E Astra 3B

LNB: LNB 1

Prioriteit: Auto

LNB/apparaat type: Universeel LNB

Spanningsmodus: Polarisatie

Verhoogd voltage: UIT

Tone modus: Band

Diseqc modus: 1.2

Snelle diseqc: UIT

Toneburst: UIT

Diseqc 1.0 commando: UIT

Diseqc 1.1 commando: UIT

Herhaal sequence: UIT

Gebruik USALS...: UIT

Opgeslagen positie: 003

Extra motor opties: UIT

 

Tuner B

Configuratiemodus: Tweede kabel van een draaibare LNB

Tuner: <generator object <genexpr> at 0xb1f8dd28>

[WanWizard]

Wat voor bijzondere LNB is dat die aan input A hangt, dat daar een geavanceerde configuratie op van toepassing is?

[1ER]

Als ik standaardgebruiker instel dan kan verdwijnen alle diseqc opties...

[littlesat]

Die heb je dan ook niet nodig... maar je hebt een duo lnb op een draaibare schotel dan heb je dus die satposdepends nodig
Kan idd zijn dat dit nu een beetje fout gaat alleen is debuggen lastig voor me daar ik je situatie niet heb.

Tuner moet eigenlijk tuner a geven....

Maar tuner A zou je ook anders moeten instellen zodat het wel gaat...

Edited by littlesat, 7 November 2019 - 22:12.

[1ER]

Ik heb geen duo LNB. Ik heb een draaibare schotel met een enkele LNB met 2 kabels.

De voorlaatste regel van de Tuner A configuratie, opgeslagen positie, daar vul het getal in waar mijn positioner op reageert. Op positie 003 staat Astra 3.

[WanWizard]

Wacht ff: je hebt een LNB, met twee uitgangen, op een rotor, en die allebei aangesloten? Hoe moet tuner B weten waar de rotor naar kijkt als je die met A hebt gedraaid? Is dat advanced positioning?

[1ER]

Ik geef bij Tuner B toch op dat het de 2e kabel is van Tuner A of niet. Deze discussie dwaalt wel heel erg af van het eigenlijke probleem. Ik draai nu met 7.1 met deze instellingen die prima werken. Als ik dezelfde instellingen invoer bij 7.2 dan krijg ik een groen scherm. Dan zit het probleem toch in 7.2 of niet soms :-(

[WanWizard]

Ik probeer de setup te begrijpen, ik heb nog nooit een rotor gehad, wist niet eens dat dit kon. Learning all the time...

 

En ja, dan is er iets gesloopt in 7.2.

[Sagitarius †]

Als ik standaardgebruiker instel dan kan verdwijnen alle diseqc opties...

Nou en.....? die uitgebreide diseqc instellingen heb je toch helemaal niet nodig of je zou een uitgebreide schotel opstelling moeten hebben zoals als ondergetekende die de rotor via een uncommitted switch laat lopen en daarnaast nog een Triax 78cm met een Triple quad lnb dan heb je die uitgebreide instellingen nodig.

De 2e tuner die kun je toch gewoon gebruiken, tuner 2 zet je dan op het simpelste diseqc protocol AB of ABCD en je kiest dan voor A, en voila klaar ben je.

En ik snap ook niet dat je geen Usals gebruikt diseqc 1.2 is een heel gedoe met posities opslaan, of ondersteund je rotor geen Usals? de huidige diseqc rotoren doen dat meestal wel, het gemak dient de mens

Edited by Sagitarius, 8 November 2019 - 10:25.