Jump to content


Photo

Edision Mini und Gigablue Quad 4k Chrash beim Plugin Meteo Viewer


  • Please log in to reply
2 replies to this topic

#1 momax

  • Senior Member
  • 30 posts

0
Neutral

Posted 28 September 2019 - 13:11

Kann sich das BitOpenPLi Enigma2 crash log

 
crashdate=Sa Sep 28 14:01:18 2019
compiledate=Sep 27 2019
skin=PLi-FullNightHD/skin.xml
sourcedate=2019-09-27
branch=rc
rev=7119aaa
component=Enigma2
 
stbmodel=osmini
stbmodel=dm8000
kernelcmdline=console=ttyS0,115200  ubi.mtd=rootfs root=ubi0:rootfs rootfstype=ubifs
nimsockets=NIM Socket 0:
imageissue=openpli 7.2-rc %h
 
 
REMOVE Peer osmini
REMOVE Peer osmini
ADD Peer gbquad4k=gbquad4k.local:8001
ADD Peer mutant51-2=mutant51-2.local:8001
ADD Peer osninoplus=osninoplus.local:8001
ADD Peer mutant51-2=mutant51-2.local:8001
ADD Peer osninoplus=osninoplus.local:8001
ADD Peer gbquad4k=gbquad4k.local:8001
REMOVE Peer gbquad4k
REMOVE Peer mutant51-2
REMOVE Peer osninoplus
REMOVE Peer gbquad4k
REMOVE Peer mutant51-2
REMOVE Peer osninoplus
REMOVE Peer osmini
REMOVE Peer osmini
ADD Peer gbquad4k=gbquad4k.local:8001
ADD Peer mutant51-2=mutant51-2.local:8001
ADD Peer gbquad4k=gbquad4k.local:8001
ADD Peer mutant51-2=mutant51-2.local:8001
ADD Peer osninoplus=osninoplus.local:8001
[eDVBPESReader] ERROR reading PES (fd=54): Value too large for defined data type
[eListboxPythonConfigContent] second value of tuple is not a tuple.
[eDVBPESReader] ERROR reading PES (fd=54): Value too large for defined data type
ADD Peer osninoplus=osninoplus.local:8001
[eListboxPythonConfigContent] second value of tuple is not a tuple.
[eListboxPythonConfigContent] second value of tuple is not a tuple.
[eListboxPythonConfigContent] second value of tuple is not a tuple.
Traceback (most recent call last):
  File "/usr/lib/enigma2/python/Components/ActionMap.py", line 57, in action
  File "/usr/lib/enigma2/python/Screens/PluginBrowser.py", line 144, in save
  File "/usr/lib/enigma2/python/Screens/PluginBrowser.py", line 148, in run
  File "/usr/lib/enigma2/python/Plugins/Extensions/MeteoViewer/plugin.py", line 20, in main
  File "/usr/lib/enigma2/python/Plugins/Extensions/MeteoViewer/ui.py", line 38, in <module>
ImportError: No module named requests
 
 
dmesg
 
<5>Linux version 4.11.0 (oe-user@oe-host) (gcc version 6.3.0 (GCC) ) #1 SMP Fri Sep 6 04:31:16 CEST 2019
<6>CPU0 revision is: 0002a065 (Broadcom BMIPS4380)
<6>FPU revision is: 00130001
<6>MIPS: machine is Broadcom BCM97362SVMB
<6>Determined physical RAM map:
<6> memory: 10000000 @ 00000000 (usable)
<4>Primary instruction cache 32kB, VIPT, 2-way, linesize 64 bytes.
<4>Primary data cache 64kB, 4-way, VIPT, cache aliases, linesize 64 bytes
<4>This processor doesn't support highmem. -262144k highmem ignored
<6>Zone ranges:
<6>  Normal   [mem 0x0000000000000000-0x000000000fffffff]
<6>  HighMem  empty
<6>Movable zone start for each node
<6>Early memory node ranges
<6>  node   0: [mem 0x0000000000000000-0x000000000fffffff]
<6>Initmem setup node 0 [mem 0x0000000000000000-0x000000000fffffff]
<7>On node 0 totalpages: 65536
<7>free_area_init_node: node 0, pgdat 80a5cc00, node_mem_map 8100b000
<7>  Normal zone: 512 pages used for memmap
<7>  Normal zone: 0 pages reserved
<7>  Normal zone: 65536 pages, LIFO batch:15
<6>percpu: Embedded 16 pages/cpu @8120e000 s34192 r8192 d23152 u65536
<7>pcpu-alloc: s34192 r8192 d23152 u65536 alloc=16*4096
<7>pcpu-alloc: [0] 0 [0] 1 
<6>Built 1 zonelists in Zone order, mobility grouping on.  Total pages: 65024
<5>Kernel command line: console=ttyS0,115200  ubi.mtd=rootfs root=ubi0:rootfs rootfstype=ubifs
<6>PID hash table entries: 1024 (order: 0, 4096 bytes)
<6>Dentry cache hash table entries: 32768 (order: 5, 131072 bytes)
<6>Inode-cache hash table entries: 16384 (order: 4, 65536 bytes)
<6>Memory: 248460K/262144K available (8530K kernel code, 334K rwdata, 1688K rodata, 320K init, 303K bss, 13684K reserved, 0K cma-reserved, 0K highmem)
<6>SLUB: HWalign=128, Order=0-3, MinObjects=0, CPUs=2, Nodes=1
<6>Hierarchical RCU implementation.
<6> Build-time adjustment of leaf fanout to 32.
<6> RCU restricting CPUs from NR_CPUS=4 to nr_cpu_ids=2.
<6>RCU: Adjusting geometry for rcu_fanout_leaf=32, nr_cpu_ids=2
<6>NR_IRQS:128
<6>irq_bcm7038_l1: registered BCM7038 L1 intc (mem: 0xb0411400, IRQs: 96)
<6>irq_brcmstb_l2: registered L2 intc (mem: 0xb0403000, parent irq: 56)
<6>irq_bcm7120_l2: registered BCM7120 L2 intc (mem: 0xb0406600, parent IRQ(s): 2)
<6>irq_bcm7120_l2: registered BCM7120 L2 intc (mem: 0xb0408b80, parent IRQ(s): 3)
<6>irq_brcmstb_l2: registered L2 intc (mem: 0xb0408440, parent irq: 58)
<6>irq_brcmstb_l2: registered L2 intc (mem: 0xb0411000, parent irq: 38)
<6>irq_brcmstb_l2: registered L2 intc (mem: 0xb0411d00, parent irq: 39)
<6>clocksource: MIPS: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 5086568860 ns
<6>sched_clock: 32 bits at 250 Hz, resolution 4000000ns, wraps every 8589934590000000ns
<6>Console: colour dummy device 80x25
<6>Calibrating delay loop... 749.56 BogoMIPS (lpj=1499136)
<6>pid_max: default: 32768 minimum: 301
<6>Mount-cache hash table entries: 1024 (order: 0, 4096 bytes)
<6>Mountpoint-cache hash table entries: 1024 (order: 0, 4096 bytes)
<6>smp: Bringing up secondary CPUs ...
<6>SMP: Booting CPU1...
<4>Primary instruction cache 32kB, VIPT, 2-way, linesize 64 bytes.
<4>Primary data cache 64kB, 4-way, VIPT, cache aliases, linesize 64 bytes
<6>CPU1 revision is: 0002a065 (Broadcom BMIPS4380)
<6>FPU revision is: 00130001
<6>Synchronize counters for CPU 1: done.
<6>SMP: CPU1 is running
<6>smp: Brought up 1 node, 2 CPUs
<6>devtmpfs: initialized
<6>clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 7645041785100000 ns
<6>futex hash table entries: 512 (order: 4, 65536 bytes)
<6>NET: Registered protocol family 16
<5>SCSI subsystem initialized
<7>libata version 3.00 loaded.
<6>usbcore: registered new interface driver usbfs
<6>usbcore: registered new interface driver hub
<6>usbcore: registered new device driver usb
<6>Linux video capture interface: v2.00
<6>Advanced Linux Sound Architecture Driver Initialized.
<6>Bluetooth: Core ver 2.22
<6>NET: Registered protocol family 31
<6>Bluetooth: HCI device and connection manager initialized
<6>Bluetooth: HCI socket layer initialized
<6>Bluetooth: L2CAP socket layer initialized
<6>Bluetooth: SCO socket layer initialized
<6>clocksource: Switched to clocksource MIPS
<5>FS-Cache: Loaded
<6>NET: Registered protocol family 2
<6>TCP established hash table entries: 2048 (order: 1, 8192 bytes)
<6>TCP bind hash table entries: 2048 (order: 2, 16384 bytes)
<6>TCP: Hash tables configured (established 2048 bind 2048)
<6>UDP hash table entries: 256 (order: 1, 8192 bytes)
<6>UDP-Lite hash table entries: 256 (order: 1, 8192 bytes)
<6>NET: Registered protocol family 1
<6>RPC: Registered named UNIX socket transport module.
<6>RPC: Registered udp transport module.
<6>RPC: Registered tcp transport module.
<6>RPC: Registered tcp NFSv4.1 backchannel transport module.
<6>workingset: timestamp_bits=30 max_order=16 bucket_order=0
<5>NFS: Registering the id_resolver key type
<5>Key type id_resolver registered
<5>Key type id_legacy registered
<6>nfs4filelayout_init: NFSv4 File Layout Driver Registering...
<6>Installing knfsd (copyright © 1996 okir@monad.swb.de).
<6>fuse init (API version 7.26)
<5>random: fast init done
<6>Block layer SCSI generic (bsg) driver version 0.4 loaded (major 253)
<6>io scheduler noop registered
<6>io scheduler deadline registered
<6>io scheduler cfq registered (default)
<6>io scheduler mq-deadline registered
<6>brcm-gisb-arb 10400000.gisb-arb: registered mem: b0400000, irqs: 104, 105
<6>brcm-sata-phy 10180100.sata-phy: registered 2 port(s)
<6>brcmstb-gpio 10406500.gpio: Registered 5 banks (GPIO(s): 0-159)
<6>brcmstb-gpio 10408c00.gpio: Registered 3 banks (GPIO(s): 160-255)
<6>Serial: 8250/16550 driver, 4 ports, IRQ sharing disabled
<6>console [ttyS0] disabled
<6>10406800.serial: ttyS0 at MMIO 0x10406800 (irq = 69, base_baud = 5062500) is a 16550A
<6>console [ttyS0] enabled
<6>10406840.serial: ttyS1 at MMIO 0x10406840 (irq = 70, base_baud = 5062500) is a 16550A
<6>10406880.serial: ttyS2 at MMIO 0x10406880 (irq = 71, base_baud = 5062500) is a 16550A
<6>loop: module loaded
<6>brcm-ahci 10181000.sata: controller can't do NCQ, turning off CAP_NCQ
<4>brcm-ahci 10181000.sata: masking port_map 0x3 -> 0x3
<6>brcm-ahci 10181000.sata: SSS flag set, parallel bus scan disabled
<6>brcm-ahci 10181000.sata: AHCI 0001.0300 32 slots 2 ports 6 Gbps 0x3 impl platform mode
<6>brcm-ahci 10181000.sata: flags: sntf stag pm clo slum part 
<6>scsi host0: brcm-ahci
<6>scsi host1: brcm-ahci
<6>ata1: SATA max UDMA/133 mmio [mem 0x10181000-0x10181a9b] port 0x100 irq 94
<6>ata2: SATA max UDMA/133 mmio [mem 0x10181000-0x10181a9b] port 0x180 irq 94
<6>brcm-ahci 10181000.sata: Broadcom AHCI SATA3 registered
<6>nand: device found, Manufacturer ID: 0x01, Chip ID: 0xdc
<6>nand: AMD/Spansion S34ML04G2
<6>nand: 512 MiB, SLC, erase size: 128 KiB, page size: 2048, OOB size: 128
<6>brcmstb_nand 10412800.nand: detected 512MiB total, 128KiB blocks, 2KiB pages, 32B OOB, 8-bit, BCH-4
<6>Bad block table found at page 262080, version 0x01
<6>Bad block table found at page 262016, version 0x01
<5>3 ofpart partitions found on MTD device brcmnand.2
<5>Creating 3 MTD partitions on "brcmnand.2":
<5>0x000000000000-0x000000800000 : "kernel"
<5>0x000000800000-0x000000c00000 : "splash"
<5>0x000000c00000-0x00001fe00000 : "rootfs"
<6>brcmstb_qspi 10410920.spi: using bspi-mspi mode
<4>m25p80 spi32766.0: found mx25l3205d, expected m25p80
<6>m25p80 spi32766.0: mx25l3205d (4096 Kbytes)
<5>3 ofpart partitions found on MTD device spi32766.0
<5>Creating 3 MTD partitions on "spi32766.0":
<5>0x000000000000-0x0000000a0000 : "cfe"
<5>0x0000000a0000-0x0000000b0000 : "nvram"
<5>0x0000000b0000-0x0000000c0000 : "mac"
<6>libphy: Fixed MDIO Bus: probed
<4>bcmgenet 10430000.ethernet: failed to get enet clock
<6>bcmgenet 10430000.ethernet: GENET 2.0 EPHY: 0x00b0
<6>ata1: SATA link down (SStatus 0 SControl 300)
<4>bcmgenet 10430000.ethernet: failed to get enet-wol clock
<4>bcmgenet 10430000.ethernet: failed to get enet-eee clock
<6>libphy: bcmgenet MII bus: probed
<6>usbcore: registered new interface driver zd1201
<6>ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
<6>ehci-platform: EHCI generic platform driver
<6>ehci-platform 10480300.usb: EHCI Host Controller
<6>ehci-platform 10480300.usb: new USB bus registered, assigned bus number 1
<6>ehci-platform 10480300.usb: irq 73, io mem 0x10480300
<6>ehci-platform 10480300.usb: USB 2.0 started, EHCI 1.00
<6>hub 1-0:1.0: USB hub found
<6>hub 1-0:1.0: 2 ports detected
<6>ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
<6>ohci-platform: OHCI generic platform driver
<6>ata2: SATA link down (SStatus 0 SControl 300)
<6>ohci-platform 10480400.usb: Generic Platform OHCI controller
<6>ohci-platform 10480400.usb: new USB bus registered, assigned bus number 2
<6>ohci-platform 10480400.usb: irq 74, io mem 0x10480400
<6>hub 2-0:1.0: USB hub found
<6>hub 2-0:1.0: 2 ports detected
<6>usbcore: registered new interface driver uas
<6>usbcore: registered new interface driver usb-storage
<6>mousedev: PS/2 mouse device common for all mice
<6>i2c /dev entries driver
<6>brcmstb-i2c 10406200.i2c: upg_bsca@97500hz registered in interrupt mode
<6>brcmstb-i2c 10406280.i2c: upg_bscb@97500hz registered in interrupt mode
<6>brcmstb-i2c 10408980.i2c: upg_bscd@97500hz registered in interrupt mode
<6>usbcore: registered new interface driver btusb
<6>bmips-cpufreq: registered
<6>sdhci: Secure Digital Host Controller Interface driver
<6>sdhci: Copyright© Pierre Ossman
<6>sdhci-pltfm: SDHCI platform and OF driver helper
<3>sdhci-brcmstb 10410000.sdhci: Clock not found in Device Tree
<6>mmc0: SDHCI controller on 10410000.sdhci [10410000.sdhci] using ADMA
<6>hidraw: raw HID events driver © Jiri Kosina
<6>usbcore: registered new interface driver usbhid
<6>usbhid: USB HID core driver
<6>NET: Registered protocol family 17
<6>Bluetooth: HIDP (Human Interface Emulation) ver 1.2
<6>Bluetooth: HIDP socket layer initialized
<5>Key type dns_resolver registered
<5>ubi0: attaching mtd2
<6>mmc0: new high speed SDIO card at address 0001
<5>random: crng init done
<5>ubi0: scanning is finished
<5>ubi0: attached mtd2 (name "rootfs", size 498 MiB)
<5>ubi0: PEB size: 131072 bytes (128 KiB), LEB size: 126976 bytes
<5>ubi0: min./max. I/O unit sizes: 2048/2048, sub-page size 2048
<5>ubi0: VID header offset: 2048 (aligned 2048), data offset: 4096
<5>ubi0: good PEBs: 3984, bad PEBs: 0, corrupted PEBs: 0
<5>ubi0: user volume: 1, internal volumes: 1, max. volumes count: 128
<5>ubi0: max/mean erase counter: 2/0, WL threshold: 4096, image sequence number: 1894146448
<5>ubi0: available PEBs: 0, total reserved PEBs: 3984, PEBs reserved for bad PEB handling: 80
<5>ubi0: background thread "ubi_bgt0d" started, PID 83
<6>ALSA device list:
<6>  No soundcards found.
<5>UBIFS (ubi0:0): UBIFS: mounted UBI device 0, volume 0, name "rootfs", R/O mode
<5>UBIFS (ubi0:0): LEB size: 126976 bytes (124 KiB), min./max. I/O unit sizes: 2048 bytes/2048 bytes
<5>UBIFS (ubi0:0): FS size: 493809664 bytes (470 MiB, 3889 LEBs), journal size 9023488 bytes (8 MiB, 72 LEBs)
<5>UBIFS (ubi0:0): reserved for root: 0 bytes (0 KiB)
<5>UBIFS (ubi0:0): media format: w4/r0 (latest is w5/r0), UUID D487C2D5-1939-4DF1-9472-E0B724A15D74, small LPT model
<6>VFS: Mounted root (ubifs filesystem) readonly on device 0:13.
<6>devtmpfs: mounted
<6>Freeing unused kernel memory: 320K
<4>This architecture does not have kernel memory protection.
<4>fts260: loading out-of-tree module taints kernel.
<4>fts260: module license 'Proprietary' taints kernel.
<4>Disabling lock debugging due to kernel taint
<6>dvbdev: DVB: registering new adapter (Broadcom BCM7xxx)
<6>input: dreambox advanced remote control (native) as /devices/virtual/misc/brcmstb/input0
<6>input: dreambox ir mouse as /devices/virtual/misc/brcmstb/input1
<6>input: dreambox front panel as /devices/virtual/misc/brcmstb/input2
<6>misc brcmstb: DVB: registering adapter 0 frontend 0 (Broadcom BCM73XX)...
<6>misc brcmstb: DVB: registering adapter 0 frontend 1 (FTS-260 (Montage RS6000))...
<6>Bluetooth: HCI UART driver ver 2.3
<6>Bluetooth: HCI UART protocol H4 registered
<6>Bluetooth: HCI UART protocol BCSP registered
<6>Bluetooth: HCI UART protocol LL registered
<6>Bluetooth: HCI UART protocol Three-wire (H5) registered
<4>RTL871X: module init start
<4>RTL871X: rtl8723bs v4.4.1_17245.20160325_BTCOEX20151223-654a
<4>RTL871X: build time: Sep 17 2019 21:45:28
<4>RTL871X: rtl8723bs BT-Coex version = BTCOEX20151223-654a
<4>RTL871X: hal_com_config_channel_plan chplan:0x21
<4>RTL871X: rtw_ndev_init(wlan0) if1 mac_addr=7c:c7:09:06:40:7b
<4>RTL871X: module init ret=0
<5>UBIFS (ubi0:0): background thread "ubifs_bgt0_0" started, PID 236
<4>RTL871X: nolinked power save enter
<4>RTL871X: nolinked power save leave
<4>RTL871X: rtw_set_802_11_connect(wlan0)  fw_state=0x00000008
<4>RTL871X: start auth
<4>RTL871X: auth success, start assoc
<4>RTL871X: rtw_cfg80211_indicate_connect(wlan0) BSS not found !!
<4>RTL871X: assoc success
<4>RTL871X: recv eapol packet
<4>RTL871X: send eapol packet
<4>RTL871X: recv eapol packet
<4>RTL871X: send eapol packet
<4>RTL871X: set pairwise key camid:4, addr:34:81:c4:dd:1f:55, kid:0, type:TKIP
<4>RTL871X: recv eapol packet
<4>RTL871X: set group key camid:5, addr:34:81:c4:dd:1f:55, kid:1, type:TKIP
<4>RTL871X: send eapol packet
<6>NET: Registered protocol family 10
<6>Segment Routing with IPv6
<4>RTL871X: recv eapol packet
<4>RTL871X: send eapol packet
<4>RTL871X: set group key camid:6, addr:34:81:c4:dd:1f:55, kid:2, type:TKIP
<4>RTL871X: ERROR sd_recv_rxfifo: alloc recvbuf FAIL!
<4>RTL871X: ERROR sd_recv_rxfifo: alloc recvbuf FAIL!
<4>RTL871X: ERROR sd_recv_rxfifo: alloc recvbuf FAIL!
<4>RTL871X: ERROR sd_recv_rxfifo: alloc recvbuf FAIL!
<4>RTL871X: ERROR sd_recv_rxfifo: alloc recvbuf FAIL!
<4>RTL871X: ERROR sd_recv_rxfifo: alloc recvbuf FAIL!
 

te mal jemand Ansehen? Das Plugin geht nicht den Letzen Images.



Re: Edision Mini und Gigablue Quad 4k Chrash beim Plugin Meteo Viewer #2 betacentauri

  • PLi® Core member
  • 5,595 posts

+254
Excellent

Posted 28 September 2019 - 13:15

Manuell über Telnet python-requests installieren.

opkg update
opkg install python-requests

Xtrend ET-9200, ET-8000, ET-10000, OpenPliPC on Ubuntu 12.04

Re: Edision Mini und Gigablue Quad 4k Chrash beim Plugin Meteo Viewer #3 momax

  • Senior Member
  • 30 posts

0
Neutral

Posted 2 October 2019 - 13:48

Danke, es geht jetzt auch bei eurem neuesten Images. 






0 user(s) are reading this topic

0 members, 0 guests, 0 anonymous users