13 replies to this topic

[HWTest]

I have recently upgraded to the latest version and now, when I switch channels I often get the Tune failed! message.

 

The sequence:

I zap to another channel

the OSD shows 0dB signal for about 1 second

then for about one second the message Tune failed! shows

and then comes the picture and sound

 

I reverted to my backup (2019/02/11) and it works perfectly, zapping is almost instant

 

I was able to 100% reproduce it by zapping between CT 24 HD and regionalnitelevize.cz on Astra 23.5E back and forth.

Both are FTA channels

I have a T90 with 8 twin LNBs, 2 EMP-CENTAURI S8/1PCP-W2 DiSEqC switches, the outputs from the switches are connected to the two inputs of the DVB-S2 FBC tuner.

 

I did not change any tuner settings.

The tuner setting:

config.Nims.0.advanced.lnb.1.diseqcMode=1_1
config.Nims.0.advanced.lnb.1.uncommittedDiseqcCommand=1
config.Nims.0.advanced.lnb.2.diseqcMode=1_1
config.Nims.0.advanced.lnb.2.uncommittedDiseqcCommand=2
config.Nims.0.advanced.lnb.3.diseqcMode=1_1
config.Nims.0.advanced.lnb.3.uncommittedDiseqcCommand=3
config.Nims.0.advanced.lnb.4.diseqcMode=1_1
config.Nims.0.advanced.lnb.4.uncommittedDiseqcCommand=4
config.Nims.0.advanced.lnb.5.diseqcMode=1_1
config.Nims.0.advanced.lnb.5.uncommittedDiseqcCommand=5
config.Nims.0.advanced.lnb.6.diseqcMode=1_1
config.Nims.0.advanced.lnb.6.uncommittedDiseqcCommand=6
config.Nims.0.advanced.lnb.7.diseqcMode=1_1
config.Nims.0.advanced.lnb.7.powerMeasurement=false
config.Nims.0.advanced.lnb.7.uncommittedDiseqcCommand=7
config.Nims.0.advanced.lnb.8.diseqcMode=1_1
config.Nims.0.advanced.lnb.8.uncommittedDiseqcCommand=8
config.Nims.0.advanced.sat.48.lnb=3
config.Nims.0.advanced.sat.90.lnb=4
config.Nims.0.advanced.sat.100.lnb=4
config.Nims.0.advanced.sat.130.lnb=5
config.Nims.0.advanced.sat.192.lnb=6
config.Nims.0.advanced.sat.235.lnb=7
config.Nims.0.advanced.sat.282.lnb=8
config.Nims.0.advanced.sat.3550.lnb=1
config.Nims.0.advanced.sat.3560.lnb=1
config.Nims.0.advanced.sat.3592.lnb=2
config.Nims.0.advanced.sats=48
config.Nims.0.configMode=advanced
config.Nims.1.configMode=equal
config.Nims.8.multiType=1
config.Nims.9.multiType=1

Is this a bug or do I need to adjust some settings?

[WanWizard]

Why are these there?

config.Nims.0.advanced.lnb.1.diseqcMode=1_1
config.Nims.0.advanced.lnb.1.uncommittedDiseqcCommand=1

There is nothing uncommited in your setup, these are just regular 8/1 switches?

[betacentauri]

Deinstall lcd4linux. Or deactivate it.

 

@PLi: There were several discussions about it and I think we decided to remove it from the image as it's not needed (It's only needed for one box. Was it vuduo?).

[HWTest]

I'm not sure I understand ...

I have attached a screenshot of my LNB setting in the GUI (there is nothing about "uncommited"), a picture of the switch and a debug log.

Is my setting wrong ? It worked perfectly, so I assumed it's correct ...

How to set it correctly?

 

 

Attached Files

•  LNB.jpg   115.57KB   2 downloads
•  s_8-1_pcp_w2.jpg   65.95KB   2 downloads
•  enigma.20191005.debuglog.txt   103.32KB   4 downloads

[betacentauri]

@PLi: There were several discussions about it and I think we decided to remove it from the image as it's not needed (It's only needed for one box. Was it vuduo?).

 

Ok, ignore it. It was removed.

 

@HWTest: Have you installed lcd4linux plugin? If yes, please remove, reboot and test again.

[HWTest]

betacentauri: OK, but how do I make the LCD to show my custom screens?

 

Edit: Yes, I have it installed.

Edited by HWTest, 5 October 2019 - 13:39.

[betacentauri]

Please test first. It's a known problem with the lcd4linux plugin.

If it solves your problem, we can think about solution for your LCD screens. But I'm no expert in it. So I hope some other will join.

[HWTest]

Tested, just disabled the plugin, rebooted and it works like a charm.

No tune failed, channel switching is almost instant (again).

But the LCD is all black now :-(

[betacentauri]

All black shouldn't be the case. Something should be shown.

But let's wait for someone with more knowledge about LCD skins than me...

[Erik Slagter]

Just removing LCD4Linux leaves the "special" LCD skin place, you should also remove it. If you're not sure, re-flash.

 

BTW I've never seen this issue myself. So "something" triggers the issue, but we don't know what.

[HWTest]

I uninstalled the plugin from the plugin menu and it's a little bit better.

But just a little bit - it shows something, when I browse recordings but the rest is all black (watching channels, watching recordings ...)

[HWTest]

I found the LCD also works when I'm in the EPG but that's it ...

[Eragon]

If you have a skin_user.xml file in root/etc/enigma2 try deleting (or renaming) it and reboot.

Edited by Eragon, 6 October 2019 - 22:50.

[HWTest]

That was it.

Thank you very much.