Jump to content


Photo

Thud branch.


  • Please log in to reply
101 replies to this topic

#1 foxbob

  • Senior Member
  • 612 posts

+18
Neutral

Posted 28 October 2019 - 21:25

Good evening.I put together for a test on thud branch.I understand that the version is test but maybe someone already tried to collect on it.For my et11000 4k collects without errors but does not work exteplayer3 when included in serviceapp.With the same settings system and ffmpeg but on zeus branch exteplayer3 works.I collected on openssl 1.1.1 but on 1.02 also does not work.My knowledge is not enough to solve this problem.I don’t know where else to ask.

And with sumo branch need to add this patch for dhcp.On zeus branch a patch is not needed.

Attached Files



Re: Thud branch. #2 betacentauri

  • PLi® Core member
  • 7,185 posts

+323
Excellent

Posted 29 October 2019 - 01:13

Do you use OpenPLi thud branch or do you use develop OpenPLi branch and “only” change openembedded branches?
Because we don’t have Zeus branch.
Xtrend ET-9200, ET-8000, ET-10000, OpenPliPC on Ubuntu 12.04

Re: Thud branch. #3 foxbob

  • Senior Member
  • 612 posts

+18
Neutral

Posted 29 October 2019 - 04:55

I use Openpli thud branch.Yes,change openembedded branches Zeus.



Re: Thud branch. #4 foxbob

  • Senior Member
  • 612 posts

+18
Neutral

Posted 29 October 2019 - 05:18

Here to check, try if interested.For duo4k.

https://drive.google...iew?usp=sharing



Re: Thud branch. #5 betacentauri

  • PLi® Core member
  • 7,185 posts

+323
Excellent

Posted 29 October 2019 - 18:13

We have own images ;)

 

Thanks for reporting! We will note it and try to fix later. Has not high priority at the moment.


Xtrend ET-9200, ET-8000, ET-10000, OpenPliPC on Ubuntu 12.04

Re: Thud branch. #6 foxbob

  • Senior Member
  • 612 posts

+18
Neutral

Posted 29 October 2019 - 20:55

And kodi not start.

21:36:14.334 T:3019590416  NOTICE: Starting Kodi (17.6 Git:2019-10-29-7e52c-stb). Platform: Linux ARM 32-bit
21:36:14.334 T:3019590416  NOTICE: Using Release Kodi x32 build
21:36:14.334 T:3019590416  NOTICE: Kodi compiled Oct 29 2019 by GCC 8.2.0 for Linux ARM 32-bit version 4.18.0 (266752)
21:36:14.334 T:3019590416  NOTICE: Running on openpli develop, kernel: Linux ARM 32-bit version 4.1.37
21:36:14.334 T:3019590416  NOTICE: FFmpeg version/source: ffmpeg-3.1-kodi
21:36:14.334 T:3019590416  NOTICE: Host CPU: ARMv7 Processor rev 3 (v7l), 2 cores available
21:36:14.334 T:3019590416  NOTICE: ARM Features: Neon enabled
21:36:14.690 T:3019590416  NOTICE: Loaded playercorefactory configuration
21:36:14.690 T:3019590416  NOTICE: Loading player core factory settings from special://masterprofile/playercorefactory.xml.
21:36:14.690 T:3019590416  NOTICE: special://masterprofile/playercorefactory.xml does not exist. Skipping.
19:36:14.700 T:3019590416  NOTICE: Running database version Addons27
19:36:14.737 T:3019590416  NOTICE: ADDONS: Using repository repository.xbmc.org
19:36:14.740 T:2988438448   ERROR: SetPriority: error Permission denied
19:36:14.966 T:3019590416  NOTICE: InitWindowSystem: Using EGL Implementation: NexTV

and

2019-10-29 21:36:14+0200 [-] [Console] command: ps | grep kodi.bin | grep -v grep
2019-10-29 21:36:14+0200 [-] [Console] finished: ps | grep kodi.bin | grep -v grep
2019-10-29 21:36:14+0200 [-] [KodiLauncher] FBLock
2019-10-29 21:36:14+0200 [-] [KodiLauncher] startup: kodi is not running, starting...
2019-10-29 21:36:14+0200 [-] [Console] command: unset PYTHONPATH;kodi;kodiext -T
2019-10-29 21:36:14+0200 [-] 
2019-10-29 21:36:14+0200 [-] [Console] finished: unset PYTHONPATH;kodi;kodiext -T
2019-10-29 21:36:14+0200 [-] [KodiLauncher] kodi stopped: retval = 0
2019-10-29 21:36:15+0200 [-] [KodiLauncher] FBUnlock


Re: Thud branch. #7 betacentauri

  • PLi® Core member
  • 7,185 posts

+323
Excellent

Posted 29 October 2019 - 21:26

Please always post which box you are using.
Xtrend ET-9200, ET-8000, ET-10000, OpenPliPC on Ubuntu 12.04

Re: Thud branch. #8 foxbob

  • Senior Member
  • 612 posts

+18
Neutral

Posted 30 October 2019 - 04:49

Sorry,GI ET11000 4K.



Re: Thud branch. #9 littlesat

  • PLi® Core member
  • 56,123 posts

+685
Excellent

Posted 30 October 2019 - 07:53

Kodi does not have the focus...

Edited by littlesat, 30 October 2019 - 07:53.

WaveFrontier 28.2E | 23.5E | 19.2E | 16E | 13E | 10/9E | 7E | 5E | 1W | 4/5W | 15W


Re: Thud branch. #10 dax

  • Senior Member
  • 228 posts

0
Neutral

Posted 1 November 2019 - 23:20

Hi, i have a problem from thud branch

Fetch eseguito nel percorso del sottomodulo 'meta-edision', ma non conteneva 0ea98688aa7e9dc0294b2dc0122748c7fb8af8c3.


Re: Thud branch. #11 WanWizard

  • PLi® Core member
  • 68,303 posts

+1,718
Excellent

Posted 1 November 2019 - 23:50

That doesn't seen right, that hash doesn't exist in the edision repo. Did you correctly install and update the submodules?


Currently in use: VU+ Duo 4K (2xFBC S2), VU+ Solo 4K (1xFBC S2), uClan Usytm 4K Pro (S2+T2), Octagon SF8008 (S2+T2), Zgemma H9.2H (S2+T2)

Due to my bad health, I will not be very active at times and may be slow to respond. I will not read the forum or PM on a regular basis.

Many answers to your question can be found in our new and improved wiki.


Re: Thud branch. #12 betacentauri

  • PLi® Core member
  • 7,185 posts

+323
Excellent

Posted 1 November 2019 - 23:56

Thud branch uses at the moment copies of original BSP layers. For edision eg https://github.com/O...22748c7fb8af8c3
Check which Git is used by executing
git remote -v
in the meta-edision directory.
Xtrend ET-9200, ET-8000, ET-10000, OpenPliPC on Ubuntu 12.04

Re: Thud branch. #13 dax

  • Senior Member
  • 228 posts

0
Neutral

Posted 2 November 2019 - 00:08

That doesn't seen right, that hash doesn't exist in the edision repo. Did you correctly install and update the submodules?

 

I think... As usually i type

export PATH=~/bin:$PATH
mkdir /home/davide/openpli_thud
cd openpli_thud/
git clone -b thud https://github.com/openpli/openpli-oe-core.git openpli-oe-core
cd openpli-oe-core
make -f Makefile

but

make -f Makefile
[ -d /home/davide/openpli_thud/openpli-oe-core/meta-openembedded/meta-oe ] || make  update
make[1]: ingresso nella directory "/home/davide/openpli_thud/openpli-oe-core"
Updating Git repositories...
Già aggiornato.
Sottomodulo 'bitbake' (git://git.openembedded.org/bitbake) registrato per il percorso 'bitbake'
Sottomodulo 'meta-amiko' (https://github.com/OpenPLi/meta-amiko.git) registrato per il percorso 'meta-amiko'
Sottomodulo 'meta-axasuhd' (https://github.com/Axas-UHD/meta-axasuhd.git) registrato per il percorso 'meta-axasuhd'
Sottomodulo 'meta-edision' (https://github.com/OpenPLi/meta-edision.git) registrato per il percorso 'meta-edision'
Sottomodulo 'meta-formuler' (https://github.com/OpenPLi/meta-formuler.git) registrato per il percorso 'meta-formuler'
Sottomodulo 'meta-gfutures' (https://github.com/OpenPLi/meta-gfutures.git) registrato per il percorso 'meta-gfutures'
Sottomodulo 'meta-gi' (https://github.com/OpenPLi/meta-gi.git) registrato per il percorso 'meta-gi'
Sottomodulo 'meta-gigablue' (https://github.com/GigaBlue-STB/meta-gigablue) registrato per il percorso 'meta-gigablue'
Sottomodulo 'meta-maxytec' (https://github.com/OpenPLi/meta-maxytec.git) registrato per il percorso 'meta-maxytec'
Sottomodulo 'meta-miraclebox' (https://github.com/OpenPLi/meta-miraclebox.git) registrato per il percorso 'meta-miraclebox'
Sottomodulo 'meta-openembedded' (git://git.openembedded.org/meta-openembedded) registrato per il percorso 'meta-openembedded'
Sottomodulo 'meta-qt5' (https://github.com/meta-qt5/meta-qt5.git) registrato per il percorso 'meta-qt5'
Sottomodulo 'meta-qviart' (https://github.com/OpenPLi/meta-qviart-5.git) registrato per il percorso 'meta-qviart'
Sottomodulo 'meta-sab' (https://github.com/OpenPLi/meta-sab.git) registrato per il percorso 'meta-sab'
Sottomodulo 'meta-spycat' (https://github.com/OpenPLi/meta-spycat.git) registrato per il percorso 'meta-spycat'
Sottomodulo 'meta-vuplus' (https://github.com/OpenPLi/meta-vuplus.git) registrato per il percorso 'meta-vuplus'
Sottomodulo 'meta-xp' (https://github.com/OpenPLi/meta-xp.git) registrato per il percorso 'meta-xp'
Sottomodulo 'meta-xpeedc' (https://github.com/OpenPLi/meta-xpeedc.git) registrato per il percorso 'meta-xpeedc'
Sottomodulo 'meta-xsarius.pli5' (https://github.com/OpenPLi/meta-xsarius.pli5.git) registrato per il percorso 'meta-xsarius.pli5'
Sottomodulo 'meta-xtrend' (https://github.com/OpenPLi/meta-xtrend.git) registrato per il percorso 'meta-xtrend'
Sottomodulo 'meta-zgemma' (https://github.com/OpenPLi/meta-zgemma.git) registrato per il percorso 'meta-zgemma'
Sottomodulo 'openembedded-core' (git://git.openembedded.org/openembedded-core) registrato per il percorso 'openembedded-core'
Clone in '/home/davide/openpli_thud/openpli-oe-core/bitbake' in corso...
Clone in '/home/davide/openpli_thud/openpli-oe-core/meta-amiko' in corso...
Clone in '/home/davide/openpli_thud/openpli-oe-core/meta-axasuhd' in corso...
Clone in '/home/davide/openpli_thud/openpli-oe-core/meta-edision' in corso...
Clone in '/home/davide/openpli_thud/openpli-oe-core/meta-formuler' in corso...
Clone in '/home/davide/openpli_thud/openpli-oe-core/meta-gfutures' in corso...
Clone in '/home/davide/openpli_thud/openpli-oe-core/meta-gi' in corso...
Clone in '/home/davide/openpli_thud/openpli-oe-core/meta-gigablue' in corso...
Clone in '/home/davide/openpli_thud/openpli-oe-core/meta-maxytec' in corso...
Clone in '/home/davide/openpli_thud/openpli-oe-core/meta-miraclebox' in corso...
Clone in '/home/davide/openpli_thud/openpli-oe-core/meta-openembedded' in corso...
Clone in '/home/davide/openpli_thud/openpli-oe-core/meta-qt5' in corso...
Clone in '/home/davide/openpli_thud/openpli-oe-core/meta-qviart' in corso...
Clone in '/home/davide/openpli_thud/openpli-oe-core/meta-sab' in corso...
Clone in '/home/davide/openpli_thud/openpli-oe-core/meta-spycat' in corso...
Clone in '/home/davide/openpli_thud/openpli-oe-core/meta-vuplus' in corso...
Clone in '/home/davide/openpli_thud/openpli-oe-core/meta-xp' in corso...
Clone in '/home/davide/openpli_thud/openpli-oe-core/meta-xpeedc' in corso...
Clone in '/home/davide/openpli_thud/openpli-oe-core/meta-xsarius.pli5' in corso...
Clone in '/home/davide/openpli_thud/openpli-oe-core/meta-xtrend' in corso...
Clone in '/home/davide/openpli_thud/openpli-oe-core/meta-zgemma' in corso...
Clone in '/home/davide/openpli_thud/openpli-oe-core/openembedded-core' in corso...
Percorso del sottomodulo 'bitbake': eseguito checkout di 'd36438759344caa447d9a0bf30749a0aa31d1fba'
Percorso del sottomodulo 'meta-amiko': eseguito checkout di '694a610d5948996c92ab0852f9a60d9f32e5e8a1'
Percorso del sottomodulo 'meta-axasuhd': eseguito checkout di 'f454aabecfdfccf2ec338a30971b20fdd1d58130'
error: Il server non consente richieste per l'oggetto non pubblicizzato 0ea98688aa7e9dc0294b2dc0122748c7fb8af8c3
Fetch eseguito nel percorso del sottomodulo 'meta-edision', ma non conteneva 0ea98688aa7e9dc0294b2dc0122748c7fb8af8c3. Fetch diretto di tale commit non riuscito.
make[1]: *** [Makefile:135: update] Error 1
make[1]: uscita dalla directory "/home/davide/openpli_thud/openpli-oe-core"
make: *** [Makefile:119: /home/davide/openpli_thud/openpli-oe-core/meta-openembedded/meta-oe] Error 2

 

Thud branch uses at the moment copies of original BSP layers. For edision eg https://github.com/O...22748c7fb8af8c3
Check which Git is used by executing
git remote -v
in the meta-edision directory.

[davide@dax-arch meta-edision]$ git remote -v
origin    https://github.com/OpenPLi/meta-edision.git (fetch)
origin    https://github.com/OpenPLi/meta-edision.git (push)


Re: Thud branch. #14 betacentauri

  • PLi® Core member
  • 7,185 posts

+323
Excellent

Posted 2 November 2019 - 00:50

I guess I know where the problem is. I will fix it tomorrow.

By the way it’s an experimental branch. It might work, but there is no guarantee for it.
Xtrend ET-9200, ET-8000, ET-10000, OpenPliPC on Ubuntu 12.04

Re: Thud branch. #15 betacentauri

  • PLi® Core member
  • 7,185 posts

+323
Excellent

Posted 2 November 2019 - 09:31

Should be fixed now. Please execute:

git submodule sync
git submodule update --init

Xtrend ET-9200, ET-8000, ET-10000, OpenPliPC on Ubuntu 12.04

Re: Thud branch. #16 dax

  • Senior Member
  • 228 posts

0
Neutral

Posted 2 November 2019 - 10:26

Thanks a lot betacentauri, now is working. I will report here any further problem, i known that we' re talking about an experimental branch.



Re: Thud branch. #17 dax

  • Senior Member
  • 228 posts

0
Neutral

Posted 2 November 2019 - 12:08

The first problem is quemu, see attached log.

Then i add in my site.conf

DISTRO_FEATURES_BACKFILL_CONSIDERED += "gobject-introspection-data"
GIO_MODULE_PACKAGES = ""

Different error but unfortunately

ERROR: qemu-native-3.0.0-r0 do_compile: oe_runmake failed
ERROR: qemu-native-3.0.0-r0 do_compile: Function failed: do_compile (log file is located at /home/davide/openpli_thud/openpli-oe-core/build/tmp/work/x86_64-linux/qemu-native/3.0.0-r0/temp/log.do_compile.827586)
ERROR: Logfile of failure stored in: /home/davide/openpli_thud/openpli-oe-core/build/tmp/work/x86_64-linux/qemu-native/3.0.0-r0/temp/log.do_compile.827586
Log data follows:
| DEBUG: Executing shell function do_compile
| NOTE: make -j 4 LD=ld  AR=ar OBJCOPY=objcopy LDFLAGS=-L/home/davide/openpli_thud/openpli-oe-core/build/tmp/work/x86_64-linux/qemu-native/3.0.0-r0/recipe-sysroot-native/usr/lib -L/home/davide/openpli_thud/openpli-oe-core/build/tmp/work/x86_64-linux/qemu-native/3.0.0-r0/recipe-sysroot-native/lib -Wl,-rpath-link,/home/davide/openpli_thud/openpli-oe-core/build/tmp/work/x86_64-linux/qemu-native/3.0.0-r0/recipe-sysroot-native/usr/lib -Wl,-rpath-link,/home/davide/openpli_thud/openpli-oe-core/build/tmp/work/x86_64-linux/qemu-native/3.0.0-r0/recipe-sysroot-native/lib -Wl,-rpath,/home/davide/openpli_thud/openpli-oe-core/build/tmp/work/x86_64-linux/qemu-native/3.0.0-r0/recipe-sysroot-native/usr/lib -Wl,-rpath,/home/davide/openpli_thud/openpli-oe-core/build/tmp/work/x86_64-linux/qemu-native/3.0.0-r0/recipe-sysroot-native/lib -Wl,-O1 -fuse-ld=bfd
|   LINK    qemu-img
|   CC      aarch64-linux-user/gdbstub-xml.o
|   CC      aarch64-linux-user/linux-user/syscall.o
| /home/davide/openpli_thud/openpli-oe-core/build/tmp/work/x86_64-linux/qemu-native/3.0.0-r0/qemu-3.0.0/linux-user/syscall.c:254:16: error: static declaration of ‘gettid’ follows non-static declaration
|   254 | _syscall0(int, gettid)
|       |                ^~~~~~
| /home/davide/openpli_thud/openpli-oe-core/build/tmp/work/x86_64-linux/qemu-native/3.0.0-r0/qemu-3.0.0/linux-user/syscall.c:185:13: note: in definition of macro ‘_syscall0’
|   185 | static type name (void)   \
|       |             ^~~~
| In file included from /usr/include/unistd.h:1170,
|                  from /home/davide/openpli_thud/openpli-oe-core/build/tmp/work/x86_64-linux/qemu-native/3.0.0-r0/qemu-3.0.0/include/qemu/osdep.h:90,
|                  from /home/davide/openpli_thud/openpli-oe-core/build/tmp/work/x86_64-linux/qemu-native/3.0.0-r0/qemu-3.0.0/linux-user/syscall.c:20:
| /usr/include/bits/unistd_ext.h:34:16: note: previous declaration of ‘gettid’ was here
|    34 | extern __pid_t gettid (void) __THROW;
|       |                ^~~~~~
|   CC      arm-linux-user/gdbstub-xml.o
| /home/davide/openpli_thud/openpli-oe-core/build/tmp/work/x86_64-linux/qemu-native/3.0.0-r0/qemu-3.0.0/linux-user/ioctls.h:176:9: error: ‘SIOCGSTAMP’ undeclared here (not in a function); did you mean ‘SIOCSRARP’?
|   176 |   IOCTL(SIOCGSTAMP, IOC_R, MK_PTR(MK_STRUCT(STRUCT_timeval)))
|       |         ^~~~~~~~~~
| /home/davide/openpli_thud/openpli-oe-core/build/tmp/work/x86_64-linux/qemu-native/3.0.0-r0/qemu-3.0.0/linux-user/syscall.c:5747:23: note: in definition of macro ‘IOCTL’
|  5747 |     { TARGET_ ## cmd, cmd, #cmd, access, 0, {  __VA_ARGS__ } },
|       |                       ^~~
| /home/davide/openpli_thud/openpli-oe-core/build/tmp/work/x86_64-linux/qemu-native/3.0.0-r0/qemu-3.0.0/linux-user/ioctls.h:177:9: error: ‘SIOCGSTAMPNS’ undeclared here (not in a function); did you mean ‘SIOCGSTAMP_OLD’?
|   177 |   IOCTL(SIOCGSTAMPNS, IOC_R, MK_PTR(MK_STRUCT(STRUCT_timespec)))
|       |         ^~~~~~~~~~~~
| /home/davide/openpli_thud/openpli-oe-core/build/tmp/work/x86_64-linux/qemu-native/3.0.0-r0/qemu-3.0.0/linux-user/syscall.c:5747:23: note: in definition of macro ‘IOCTL’
|  5747 |     { TARGET_ ## cmd, cmd, #cmd, access, 0, {  __VA_ARGS__ } },
|       |                       ^~~
|   CC      arm-linux-user/linux-user/syscall.o
| make[1]: *** [/home/davide/openpli_thud/openpli-oe-core/build/tmp/work/x86_64-linux/qemu-native/3.0.0-r0/qemu-3.0.0/rules.mak:69: linux-user/syscall.o] Error 1
| make: *** [Makefile:481: subdir-aarch64-linux-user] Error 2
| make: *** Waiting for unfinished jobs....
|   CC      arm-linux-user/linux-user/strace.o
| /home/davide/openpli_thud/openpli-oe-core/build/tmp/work/x86_64-linux/qemu-native/3.0.0-r0/qemu-3.0.0/linux-user/syscall.c:254:16: error: static declaration of ‘gettid’ follows non-static declaration
|   254 | _syscall0(int, gettid)
|       |                ^~~~~~
| /home/davide/openpli_thud/openpli-oe-core/build/tmp/work/x86_64-linux/qemu-native/3.0.0-r0/qemu-3.0.0/linux-user/syscall.c:185:13: note: in definition of macro ‘_syscall0’
|   185 | static type name (void)   \
|       |             ^~~~
| In file included from /usr/include/unistd.h:1170,
|                  from /home/davide/openpli_thud/openpli-oe-core/build/tmp/work/x86_64-linux/qemu-native/3.0.0-r0/qemu-3.0.0/include/qemu/osdep.h:90,
|                  from /home/davide/openpli_thud/openpli-oe-core/build/tmp/work/x86_64-linux/qemu-native/3.0.0-r0/qemu-3.0.0/linux-user/syscall.c:20:
| /usr/include/bits/unistd_ext.h:34:16: note: previous declaration of ‘gettid’ was here
|    34 | extern __pid_t gettid (void) __THROW;
|       |                ^~~~~~
| /home/davide/openpli_thud/openpli-oe-core/build/tmp/work/x86_64-linux/qemu-native/3.0.0-r0/qemu-3.0.0/linux-user/ioctls.h:176:9: error: ‘SIOCGSTAMP’ undeclared here (not in a function); did you mean ‘SIOCSRARP’?
|   176 |   IOCTL(SIOCGSTAMP, IOC_R, MK_PTR(MK_STRUCT(STRUCT_timeval)))
|       |         ^~~~~~~~~~
| /home/davide/openpli_thud/openpli-oe-core/build/tmp/work/x86_64-linux/qemu-native/3.0.0-r0/qemu-3.0.0/linux-user/syscall.c:5747:23: note: in definition of macro ‘IOCTL’
|  5747 |     { TARGET_ ## cmd, cmd, #cmd, access, 0, {  __VA_ARGS__ } },
|       |                       ^~~
| /home/davide/openpli_thud/openpli-oe-core/build/tmp/work/x86_64-linux/qemu-native/3.0.0-r0/qemu-3.0.0/linux-user/ioctls.h:177:9: error: ‘SIOCGSTAMPNS’ undeclared here (not in a function); did you mean ‘SIOCGSTAMP_OLD’?
|   177 |   IOCTL(SIOCGSTAMPNS, IOC_R, MK_PTR(MK_STRUCT(STRUCT_timespec)))
|       |         ^~~~~~~~~~~~
| /home/davide/openpli_thud/openpli-oe-core/build/tmp/work/x86_64-linux/qemu-native/3.0.0-r0/qemu-3.0.0/linux-user/syscall.c:5747:23: note: in definition of macro ‘IOCTL’
|  5747 |     { TARGET_ ## cmd, cmd, #cmd, access, 0, {  __VA_ARGS__ } },
|       |                       ^~~
| make[1]: *** [/home/davide/openpli_thud/openpli-oe-core/build/tmp/work/x86_64-linux/qemu-native/3.0.0-r0/qemu-3.0.0/rules.mak:69: linux-user/syscall.o] Error 1
| make[1]: *** Waiting for unfinished jobs....
| make: *** [Makefile:481: subdir-arm-linux-user] Error 2
| ERROR: oe_runmake failed
| WARNING: /home/davide/openpli_thud/openpli-oe-core/build/tmp/work/x86_64-linux/qemu-native/3.0.0-r0/temp/run.do_compile.827586:1 exit 1 from 'exit 1'
| ERROR: Function failed: do_compile (log file is located at /home/davide/openpli_thud/openpli-oe-core/build/tmp/work/x86_64-linux/qemu-native/3.0.0-r0/temp/log.do_compile.827586)
ERROR: Task (virtual:native:/home/davide/openpli_thud/openpli-oe-core/openembedded-core/meta/recipes-devtools/qemu/qemu_3.0.0.bb:do_compile) failed with exit code '1'
NOTE: Tasks Summary: Attempted 1018 tasks of which 883 didn't need to be rerun and 1 failed.

Summary: 1 task failed:
  virtual:native:/home/davide/openpli_thud/openpli-oe-core/openembedded-core/meta/recipes-devtools/qemu/qemu_3.0.0.bb:do_compile
Summary: There were 143 WARNING messages shown.
Summary: There were 2 ERROR messages shown, returning a non-zero exit code.

Attached Files


Edited by dax, 2 November 2019 - 12:08.


Re: Thud branch. #18 betacentauri

  • PLi® Core member
  • 7,185 posts

+323
Excellent

Posted 2 November 2019 - 12:26

Which OS do you use? On ubuntu 16.04. we have no build problems.


Xtrend ET-9200, ET-8000, ET-10000, OpenPliPC on Ubuntu 12.04

Re: Thud branch. #19 betacentauri

  • PLi® Core member
  • 7,185 posts

+323
Excellent

Posted 2 November 2019 - 12:28

Please try this patch:

https://patchwork.op...g/patch/165581/


Xtrend ET-9200, ET-8000, ET-10000, OpenPliPC on Ubuntu 12.04

Re: Thud branch. #20 dax

  • Senior Member
  • 228 posts

0
Neutral

Posted 2 November 2019 - 13:29

I use arch 'living on the edge' linux.

I have a problem with the lines of patch

diff --git a/meta/recipes-devtools/qemu/qemu_3.0.0.bb b/meta/recipes-devtools/qemu/qemu_3.0.0.bb
index 6c3049b..e483aca 100644
--- a/meta/recipes-devtools/qemu/qemu_3.0.0.bb
+++ b/meta/recipes-devtools/qemu/qemu_3.0.0.bb
@@ -40,6 +40,8 @@  SRC_URI = "https://download.qemu.org/${BPN}-${PV}.tar.xz \
            file://CVE-2019-3812.patch \
            file://CVE-2019-6778.patch \
            file://CVE-2019-8934.patch \
+           file://0001-linux-user-assume-__NR_gettid-always-exists.patch \
+           file://0001-linux-user-rename-gettid-to-sys_gettid-to-avoid-clas.patch \
            "
 UPSTREAM_CHECK_REGEX = "qemu-(?P<pver>\d+(\.\d+)+)\.tar"
 

ERROR: qemu-native-3.0.0-r0 do_patch: Command Error: 'quilt --quiltrc /home/davide/openpli_thud/openpli-oe-core/build/tmp/work/x86_64-linux/qemu-native/3.0.0-r0/recipe-sysroot-native/etc/quiltrc push' exited with 0  Output:
Applying patch thud-1-2-qemu-fix-build-issue-on-new-hosts-with-glibc-2.30.patch
patching file meta/recipes-devtools/qemu/qemu/0001-linux-user-assume-__NR_gettid-always-exists.patch
patching file meta/recipes-devtools/qemu/qemu/0001-linux-user-rename-gettid-to-sys_gettid-to-avoid-clas.patch
can't find file to patch at input line 161
Perhaps you used the wrong -p or --strip option?
The text leading up to this was:
--------------------------
|diff --git a/meta/recipes-devtools/qemu/qemu_3.0.0.bb b/meta/recipes-devtools/qemu/qemu_3.0.0.bb
|index 6c3049b..e483aca 100644
|--- a/meta/recipes-devtools/qemu/qemu_3.0.0.bb
|+++ b/meta/recipes-devtools/qemu/qemu_3.0.0.bb
--------------------------
No file to patch.  Skipping patch.
1 out of 1 hunk ignored
Patch thud-1-2-qemu-fix-build-issue-on-new-hosts-with-glibc-2.30.patch does not apply (enforce with -f)
ERROR: qemu-native-3.0.0-r0 do_patch: Function failed: patch_do_patch
ERROR: Logfile of failure stored in: /home/davide/openpli_thud/openpli-oe-core/build/tmp/work/x86_64-linux/qemu-native/3.0.0-r0/temp/log.do_patch.849877
ERROR: Task (virtual:native:/home/davide/openpli_thud/openpli-oe-core/openembedded-core/meta/recipes-devtools/qemu/qemu_3.0.0.bb:do_patch) failed with exit code '1'

Why can't find file to patch???




0 user(s) are reading this topic

0 members, 0 guests, 0 anonymous users