57 replies to this topic

[betacentauri]

Latest version? There were more changes after this commit.

[WanWizard]

Also don't forget the corresponding update to SystemInfo.py, to avoid a crash.

[twol]

Didn’t pick up those commits - will it tomorrow .

[twol]

So tested with OpemPli 7.2 RC and the updated Harddisk.py/SystemInfo.py

1.Menu/Information doesn't show the SD card

2. Menu/Setup/System/Harddisk doesn't see it

3. MountManager can see it

 

Perhaps a bit of debug code would help or do you want me to try something else??

Partitions are:-

major minor  #blocks  name

   1        0       4096 ram0
   1        1       4096 ram1
   1        2       4096 ram2
   1        3       4096 ram3
   1        4       4096 ram4
   1        5       4096 ram5
   1        6       4096 ram6
   1        7       4096 ram7
   1        8       4096 ram8
   1        9       4096 ram9
   1       10       4096 ram10
   1       11       4096 ram11
   1       12       4096 ram12
   1       13       4096 ram13
   1       14       4096 ram14
   1       15       4096 ram15
 179        0    7634944 mmcblk0
 179        1       1024 mmcblk0p1
 179        2       1024 mmcblk0p2
 179        3      18432 mmcblk0p3
 179        4       2048 mmcblk0p4
 179        5       2048 mmcblk0p5
 179        6       4096 mmcblk0p6
 179        7       4096 mmcblk0p7
 259        0       4096 mmcblk0p8
 259        1      40960 mmcblk0p9
 259        2      20480 mmcblk0p10
 259        3      20480 mmcblk0p11
 259        4       4096 mmcblk0p12
 259        5    1048576 mmcblk0p13
 259        6     153600 mmcblk0p14
 259        7     313344 mmcblk0p15
 259        8     262144 mmcblk0p16
 259        9      51200 mmcblk0p17
 259       10       8192 mmcblk0p18
 259       11      16384 mmcblk0p19
 259       12      16384 mmcblk0p20
 259       13      16384 mmcblk0p21
 259       14      16384 mmcblk0p22
 259       15    5609472 mmcblk0p23
 179       24        512 mmcblk0rpmb
 179       16       4096 mmcblk0boot1
 179        8       4096 mmcblk0boot0
 179       32    7782400 mmcblk1
 179       33    7781376 mmcblk1p1
   8        0  250059096 sda
   8        1  250057728 sda1

Edited by twol, 20 November 2019 - 10:43.

[WanWizard]

Which which box do you test?

[twol]

Which which box do you test?

H9Combo - see re edit with partition list (if you want a test another box let me know - have also H9, H9Twin(will be same as Combo) and ............ SF8008)

[WanWizard]

I've tested with my H9Twin, I will try again later today.

 

p.s. currently only looking at Harddisk/Initialize, as that was the question, the rest is cosmetics. And plugins should be dealt with by the author, no idea who made that MountManager.

[WanWizard]

Was indeed not 100%. Fixed it.

 

 screenshot_19700101021428.jpg   69.34KB   2 downloads  screenshot_19700101021453.jpg   37.91KB   2 downloads

 

I've installed the mount manager. That shows mounted partitions, which is different from devices.

[twol]

OK, that works for me on the H9Combo

[WanWizard]

[twol]

You might have an issue where the boot device is not on the Emmc?

[WanWizard]

The only possible issue that can exist is if have a box that has an internal eMMC boot device, but you boot it from another device or an NFS mount through a serial connection and custom cmdline arguments.

 

We've discussed this, and have decided that if you are smart enough to do that, you are also smart enough not to format your internal eMMC by mistake.

[twol]

You have more faith than I have!!!    .... but I was thinking of the SF8008

[WanWizard]

We don't support the SF8008, so that is a non issue for the moment.

[byanonimo]

I don't know if it can be useful to the problem, but today installing the new openpli-7.2-rc-h9combo-20191122_emmc on h9combo I wanted to do a test, that is to insert the microsd on the decoder, and the USB for the flash, has started everything, has finished the installation of the image, before restarting the decoder for the ritual settings, language, overscan, satellites etc. etc. I removed the USB from the decoder and in the end, in the menu, system settings, advanced settings, I found the Hard Disk item. and inside the mmc that he didn't see working.

[littlesat]

And when you restart enigma2 after inserting the SD-card...?

[byanonimo]

After the installation, once you have seen the microsd, this remains, in fact if I install picon-like plugins, the deco asks me where I want to install internal memory or mmc

[byanonimo]

I believe that the deco after the installation of the image, if I don't remove the attached USB key, this goes into conflict with the microsd.