Posted 5 November 2019 - 18:17
The number is not relevant as long as it can be detected.
Problem remains, as betacentauri correctly mentions, that some boxes can boot from another device than the designated boot device (you can even boot the box from NFS is you want), but still you want to blacklist that boot device...
Currently in use: VU+ Duo 4K (2xFBC S2), VU+ Solo 4K (1xFBC S2), uClan Usytm 4K Pro (S2+T2), Octagon SF8008 (S2+T2), Zgemma H9.2H (S2+T2)
Due to my bad health, I will not be very active at times and may be slow to respond. I will not read the forum or PM on a regular basis.
Many answers to your question can be found in our new and improved wiki.
Posted 5 November 2019 - 18:38
Edited by littlesat, 5 November 2019 - 18:39.
WaveFrontier 28.2E | 23.5E | 19.2E | 16E | 13E | 10/9E | 7E | 5E | 1W | 4/5W | 15W
Posted 5 November 2019 - 18:44
I also have no idea how detect that automatically.
OE-Alliance adds informations into the BSP layers so that the internal flash device can be ignored/blacklisted.
Not a possibility we have at the moment.
Posted 5 November 2019 - 19:01
Not a possibility we would like either, hardcoding it.
I think the multiboot code has logic to find partitions that contain bootable images. Perhaps that can be generalized to return a list of devices that contain those partitions, so they can be blacklisted?
Currently in use: VU+ Duo 4K (2xFBC S2), VU+ Solo 4K (1xFBC S2), uClan Usytm 4K Pro (S2+T2), Octagon SF8008 (S2+T2), Zgemma H9.2H (S2+T2)
Due to my bad health, I will not be very active at times and may be slow to respond. I will not read the forum or PM on a regular basis.
Many answers to your question can be found in our new and improved wiki.
Posted 5 November 2019 - 19:15
Edited by littlesat, 5 November 2019 - 19:17.
WaveFrontier 28.2E | 23.5E | 19.2E | 16E | 13E | 10/9E | 7E | 5E | 1W | 4/5W | 15W
Posted 5 November 2019 - 19:41
Read what betacentauri wrote.
If you boot from SD (the second eMMC device !) than that has the startup files on it. That doesn't mean its fine to format the first eMMC device, that means you may brick the box.
Currently in use: VU+ Duo 4K (2xFBC S2), VU+ Solo 4K (1xFBC S2), uClan Usytm 4K Pro (S2+T2), Octagon SF8008 (S2+T2), Zgemma H9.2H (S2+T2)
Due to my bad health, I will not be very active at times and may be slow to respond. I will not read the forum or PM on a regular basis.
Many answers to your question can be found in our new and improved wiki.
Posted 5 November 2019 - 20:00
WaveFrontier 28.2E | 23.5E | 19.2E | 16E | 13E | 10/9E | 7E | 5E | 1W | 4/5W | 15W
Posted 5 November 2019 - 20:08
I don't know what other partitions are on the internal eMMC device? Like the boot loader partition?
Currently in use: VU+ Duo 4K (2xFBC S2), VU+ Solo 4K (1xFBC S2), uClan Usytm 4K Pro (S2+T2), Octagon SF8008 (S2+T2), Zgemma H9.2H (S2+T2)
Due to my bad health, I will not be very active at times and may be slow to respond. I will not read the forum or PM on a regular basis.
Many answers to your question can be found in our new and improved wiki.
Posted 5 November 2019 - 21:45
I don't know what other partitions are on the internal eMMC device? Like the boot loader partition?
In Systemsinfo(multiboot) you already specify the eMMC device which handles the diiference between most rmultiboot receivers (mmcblk0) and teh Edision (mmcblk1) so its not too difficult (after all you don‘t build for the Octagon SF8008 which uses the sd card as a multiboot device or have the h9 using the sdcard )
Gigablue Quad 4K & UE 4K
.........FBC Tuners:
------------------> DUR-Line DCR 5-1-8-L4 Multiswitch to 1.5M dish(28.2E)
------------------> Spaun SUS 5581/33 NFA Multiswitch to 80 cm dish(19.2E)
.........DVB-S2X into 90cm dish (27.5W)
Octagon sf8008, AX HD61, Edision Osmio 4K+, Zgemma H9Combo using Legacy ports on multiswitches
Zgemma H9twin & Zgemma H9 C/S mode into Giga4K
Posted 5 November 2019 - 21:47
after all you don‘t build for the Octagon SF8008 which uses the sd card as a multiboot device or have the h9 using the sdcard
True, but that doesn't mean we should ignore the possibility. Discussions with Octagon are still ongoing, but they seem to lack the skills to create a working BSP.
Currently in use: VU+ Duo 4K (2xFBC S2), VU+ Solo 4K (1xFBC S2), uClan Usytm 4K Pro (S2+T2), Octagon SF8008 (S2+T2), Zgemma H9.2H (S2+T2)
Due to my bad health, I will not be very active at times and may be slow to respond. I will not read the forum or PM on a regular basis.
Many answers to your question can be found in our new and improved wiki.
Posted 5 November 2019 - 22:01
I would concentrate on the rest -the SF8008 uses a multiboot setup that is totally diifferent from the other multiboot receivers and has to be specifically coded for -not something OpenPli likes to do (And I agree with that concept)
Edited by twol, 5 November 2019 - 22:04.
Gigablue Quad 4K & UE 4K
.........FBC Tuners:
------------------> DUR-Line DCR 5-1-8-L4 Multiswitch to 1.5M dish(28.2E)
------------------> Spaun SUS 5581/33 NFA Multiswitch to 80 cm dish(19.2E)
.........DVB-S2X into 90cm dish (27.5W)
Octagon sf8008, AX HD61, Edision Osmio 4K+, Zgemma H9Combo using Legacy ports on multiswitches
Zgemma H9twin & Zgemma H9 C/S mode into Giga4K
Posted 5 November 2019 - 22:02
Edited by littlesat, 5 November 2019 - 22:02.
WaveFrontier 28.2E | 23.5E | 19.2E | 16E | 13E | 10/9E | 7E | 5E | 1W | 4/5W | 15W
Posted 5 November 2019 - 22:05
Yep... better boxes watch what others do...
Its a great receiver ...... but multiboot implementation?
Gigablue Quad 4K & UE 4K
.........FBC Tuners:
------------------> DUR-Line DCR 5-1-8-L4 Multiswitch to 1.5M dish(28.2E)
------------------> Spaun SUS 5581/33 NFA Multiswitch to 80 cm dish(19.2E)
.........DVB-S2X into 90cm dish (27.5W)
Octagon sf8008, AX HD61, Edision Osmio 4K+, Zgemma H9Combo using Legacy ports on multiswitches
Zgemma H9twin & Zgemma H9 C/S mode into Giga4K
Posted 6 November 2019 - 08:06
WaveFrontier 28.2E | 23.5E | 19.2E | 16E | 13E | 10/9E | 7E | 5E | 1W | 4/5W | 15W
Posted 19 November 2019 - 12:29
Has anyone managed to solve the problem of the hard disk entry in the openpli image menu of 2019/11/18 to format the microsd ??
Posted 19 November 2019 - 13:11
On the todo list, building an h9 image as I type...
Currently in use: VU+ Duo 4K (2xFBC S2), VU+ Solo 4K (1xFBC S2), uClan Usytm 4K Pro (S2+T2), Octagon SF8008 (S2+T2), Zgemma H9.2H (S2+T2)
Due to my bad health, I will not be very active at times and may be slow to respond. I will not read the forum or PM on a regular basis.
Many answers to your question can be found in our new and improved wiki.
Posted 19 November 2019 - 13:52
On the todo list, building an h9 image as I type...
Hope you mean h9combo which is more typical of the Zgemma boxes, h9 is different type in terms of root/kernel and how it treats SD card
Gigablue Quad 4K & UE 4K
.........FBC Tuners:
------------------> DUR-Line DCR 5-1-8-L4 Multiswitch to 1.5M dish(28.2E)
------------------> Spaun SUS 5581/33 NFA Multiswitch to 80 cm dish(19.2E)
.........DVB-S2X into 90cm dish (27.5W)
Octagon sf8008, AX HD61, Edision Osmio 4K+, Zgemma H9Combo using Legacy ports on multiswitches
Zgemma H9twin & Zgemma H9 C/S mode into Giga4K
Posted 19 November 2019 - 14:08
I need an image for every box that has an eMMC boot device, and a separate eMMC slot, for test purposes, we have to make sure users don't format the boot device by accident.
May take a while, my server takes at least 2 hours for a build, and my poor health doesn't permit me to do anything for hours on end...
Currently in use: VU+ Duo 4K (2xFBC S2), VU+ Solo 4K (1xFBC S2), uClan Usytm 4K Pro (S2+T2), Octagon SF8008 (S2+T2), Zgemma H9.2H (S2+T2)
Due to my bad health, I will not be very active at times and may be slow to respond. I will not read the forum or PM on a regular basis.
Many answers to your question can be found in our new and improved wiki.
Posted 19 November 2019 - 16:51
If someone is willing to test this: https://github.com/O...f2725bc89930e60 ?
Please let me know if it works, also if it doesn't show the boot device by mistake (and if so, do not format it! 
).
Currently in use: VU+ Duo 4K (2xFBC S2), VU+ Solo 4K (1xFBC S2), uClan Usytm 4K Pro (S2+T2), Octagon SF8008 (S2+T2), Zgemma H9.2H (S2+T2)
Due to my bad health, I will not be very active at times and may be slow to respond. I will not read the forum or PM on a regular basis.
Many answers to your question can be found in our new and improved wiki.
Posted 19 November 2019 - 21:10
If someone is willing to test this: https://github.com/O...f2725bc89930e60 ?
Please let me know if it works, also if it doesn't show the boot device by mistake (and if so, do not format it!
Harddisk doesn't see the SD card, MountManager (from Plugins) does see it (I copied Harddisk mgr from Develop into current 7.2)
Gigablue Quad 4K & UE 4K
.........FBC Tuners:
------------------> DUR-Line DCR 5-1-8-L4 Multiswitch to 1.5M dish(28.2E)
------------------> Spaun SUS 5581/33 NFA Multiswitch to 80 cm dish(19.2E)
.........DVB-S2X into 90cm dish (27.5W)
Octagon sf8008, AX HD61, Edision Osmio 4K+, Zgemma H9Combo using Legacy ports on multiswitches
Zgemma H9twin & Zgemma H9 C/S mode into Giga4K
0 members, 0 guests, 0 anonymous users
