Jump to content


Photo

[eDVBPESReader] ERROR reading PES


  • Please log in to reply
3 replies to this topic

#1 rantanplan

  • Senior Member
  • 186 posts

+5
Neutral

Posted 10 November 2019 - 12:42

Hello to the eager hobbyists

maybe someone would like to give me a hint.
It is not a problem of the 'original' Pli-Image construction.
For a long time I'm building a modified sh4 pli.
Principal basis is libeplayer based.
Error occurs at the end of a stream (mp4) and leads to reboot.
Media data will otherwise be given back properly.
My question ...
Does the error originally come from the e2?
Or would I have to adapt a bit more the libeplayer3 or the servicesh4?

greetings

[eDVBPESReader] ERROR reading PES (fd=53): Value too large for defined data type
[eDVBPESReader] ERROR reading PES (fd=53): Value too large for defined data type
[eDVBPESReader] ERROR reading PES (fd=53): Value too large for defined data type
Backtrace:
/usr/bin/enigma2(_Z17handleFatalSignaliP9siginfo_tPv) [0x46A4C0]
/usr/lib/libavcodec.so.58(av_packet_copy_props) [0x2D13B976]
-------FATAL SIGNAL


Re: [eDVBPESReader] ERROR reading PES #2 betacentauri

  • PLi® Core member
  • 5,813 posts

+261
Excellent

Posted 10 November 2019 - 12:53

I don’t think the “ERROR reading PES” errors are related. I already saw these messages without a crash.
The crash seems to be in libavcodec, but it can be that the calling part already delivers bad data. So this backtrace doesn’t really help.
If you have the knowledge disable the signal handler in e2. Then a core dump is created during next crash. And this core can be analyzed with gdb.
Or add tons of debug messages to find out where it crashes.
Xtrend ET-9200, ET-8000, ET-10000, OpenPliPC on Ubuntu 12.04

Re: [eDVBPESReader] ERROR reading PES #3 rantanplan

  • Senior Member
  • 186 posts

+5
Neutral

Posted 10 November 2019 - 13:02

 Thanks in advance.
dmesg attached, but i dont even know if it helps.

dmesg

ailed to get output window -22
<4>failed to set output window -22
<4>failed to get output window -22
<4>failed to set output window -22
<4>failed to get output window -22
<4>failed to set output window -22
<4>failed to get output window -22
<4>failed to set output window -22
<4>failed to get output window -22
<4>failed to set output window -22
<4>failed to get output window -22
<4>failed to set output window -22
<4>VFD/AOTOM: unknown IOCTL 0x1015
<4>dtv_property_dump: tvp.cmd = 0x0000002c undefined
<4>dtv_property_dump: tvp.cmd = 0x0000002c undefined
<4>dtv_property_dump: tvp.cmd = 0x0000002c undefined
<7>reset_tsm: 1 numRunningFeeds: 0 => calling stm_tsm_init(1)
<7>[TSM] reinit stream routing...
<4>ret slothandle = 20000
<4>pti_hal_slot_set_pid: 2 20000 0
<4>pti_hal_slot_set_pid ok (pid 0, tc = 0)
<4>pti_hal_slot_clear_pid slot = 0, tc = 0, num = 1
<4>pti_hal_slot_free 20000
<7>reset_tsm: 1 numRunningFeeds: 0 => calling stm_tsm_init(1)
<7>[TSM] reinit stream routing...
<4>ret slothandle = 20000
<4>pti_hal_slot_set_pid: 1 20000 0
<4>pti_hal_slot_set_pid ok (pid 0, tc = 0)
<4>pti_hal_slot_clear_pid slot = 0, tc = 0, num = 1
<4>pti_hal_slot_free 20000
<4>failed to get output window -22
<4>failed to set output window -22
<4>failed to get output window -22
<4>failed to set output window -22
<4>failed to get output window -22
<4>failed to set output window -22
<4>failed to get output window -22
<4>failed to set output window -22
<4>failed to get output window -22
<4>failed to set output window -22
<4>failed to get output window -22
<4>failed to set output window -22
<4>failed to get output window -22
<4>failed to set output window -22
<4>failed to get output window -22
<4>failed to set output window -22
<4>aotom_write_rtc_offset 4 - aotom_write_rtc_offset -> 3600
<4> offset: 3600
<4>Can't set policy, VideoStream NULL
<4>proc_denc_0_wss_write 4 - auto
<7>proc_hdmi_audio_source_write 3 - 
<7>pcm
<7>stmhdmiio_set_audio_source - 88ee0000
<4>ERROR:LinuxDvb:DvbDisplayDelete: Failed to close audio surface
<4>power_standbyled_write(3, offoff
<7>proc_hdmi_edid_handling_write 8 - 
<7>[HDMI] EDID handling arg: 00000000
<7>[HDMI] EDID handling: strict
<7>stmhdmiio_set_edid_handling - 88ee0000
<4>Can't set policy, VideoStream NULL
<4>proc_denc_0_wss_write 4 - auto
<4>Can't set policy, VideoStream NULL
<4>proc_denc_0_wss_write 4 - auto
<4>Can't set policy, VideoStream NULL
<4>proc_denc_0_wss_write 4 - auto
<4>Can't set policy, VideoStream NULL
<4>proc_denc_0_wss_write 4 - auto
<7>Found mode to set 720p50 at 21
<7>Found mode to set 720p50 at 21
<4>Can't set policy, VideoStream NULL
<4>proc_denc_0_wss_write 4 - auto
<4>failed to get output window -22
<4>failed to set output window -22
<4>failed to get output window -22
<4>failed to set output window -22
<4>failed to get output window -22
<4>failed to set output window -22
<4>failed to get output window -22
<4>failed to set output window -22
<4>ERROR:LinuxDvb:DvbDisplayDelete: Failed to close audio surface
<4>source 1, session_handle 2
<4>before
<4>internal->demux[0] = 0x88038e9c
<4>internal->demux_tag[0] = 0
<4>internal->demux[1] = 0x88038914
<4>internal->demux_tag[1] = 1
<4>internal->demux[2] = 0x8803838c
<4>internal->demux_tag[2] = 2
<4>internal->demux[3] = 0x0
<4>internal->demux_tag[3] = 3
<4>after
<4>internal->demux[0] = 0x88038e9c
<4>internal->demux_tag[0] = 0
<4>internal->demux[1] = 0x88038914
<4>internal->demux_tag[1] = 2
<4>internal->demux[2] = 0x8803838c
<4>internal->demux_tag[2] = 1
<4>internal->demux[3] = 0x0
<4>internal->demux_tag[3] = 3
<7>reset_tsm: 1 numRunningFeeds: 0 => calling stm_tsm_init(1)
<7>[TSM] reinit stream routing...
<4>ret slothandle = 20000
<4>pti_hal_slot_set_pid: 2 20000 20
<4>pti_hal_slot_set_pid ok (pid 20, tc = 0)
<4>ret slothandle = 20001
<4>pti_hal_slot_set_pid: 2 20001 6323
<4>pti_hal_slot_set_pid ok (pid 6323, tc = 1)
<7>Find spdif_bypass control at 88d51380
<4>ret slothandle = 20002
<4>pti_hal_slot_set_pid: 2 20002 6310
<4>pti_hal_slot_set_pid ok (pid 6310, tc = 2)
<4>ret slothandle = 20003
<4>pti_hal_slot_set_pid: 2 20003 6330
<4>pti_hal_slot_set_pid ok (pid 6330, tc = 3)
<4>ret slothandle = 20004
<4>pti_hal_slot_set_pid: 2 20004 0
<4>pti_hal_slot_set_pid ok (pid 0, tc = 4)
<4>ret slothandle = 20005
<4>pti_hal_slot_set_pid: 2 20005 18
<4>pti_hal_slot_set_pid ok (pid 18, tc = 5)
<4>pti_hal_slot_clear_pid slot = 4, tc = 4, num = 6
<4>pti_hal_slot_free 20004
<4>ret slothandle = 20004
<4>pti_hal_slot_set_pid: 2 20004 0
<4>pti_hal_slot_set_pid ok (pid 0, tc = 5)
<7>ksound: Set parameters for hw:0,2 to 2 x 48000hz with period 1536 (of 4608)
<7>ksound: Set parameters for hw:0,1 to 2 x 48000hz with period 1536 (of 4608)
<7>ksound: Set parameters for hw:0,0 to 2 x 48000hz with period 1536 (of 4608)
<4>pti_hal_slot_clear_pid slot = 4, tc = 5, num = 6
<4>pti_hal_slot_free 20004
<4>ret slothandle = 20004
<4>pti_hal_slot_set_pid: 2 20004 0
<4>pti_hal_slot_set_pid ok (pid 0, tc = 5)
<4>ret slothandle = 20006
<4>pti_hal_slot_set_pid: 2 20006 6300
<4>pti_hal_slot_set_pid ok (pid 6300, tc = 6)
<4>pti_hal_slot_clear_pid slot = 4, tc = 5, num = 7
<4>pti_hal_slot_free 20004
<4>ret slothandle = 20004
<4>pti_hal_slot_set_pid: 2 20004 0
<4>pti_hal_slot_set_pid ok (pid 0, tc = 6)
<4>pti_hal_slot_clear_pid slot = 4, tc = 6, num = 7
<4>pti_hal_slot_free 20004
<4>ret slothandle = 20004
<4>pti_hal_slot_set_pid: 2 20004 0
<4>pti_hal_slot_set_pid ok (pid 0, tc = 6)
<4>ret slothandle = 20007
<4>pti_hal_slot_set_pid: 2 20007 6100
<4>pti_hal_slot_set_pid ok (pid 6100, tc = 7)
<4>ret slothandle = 20008
<4>pti_hal_slot_set_pid: 2 20008 17
<4>pti_hal_slot_set_pid ok (pid 17, tc = 8)
<4>pti_hal_slot_clear_pid slot = 6, tc = 5, num = 9
<4>pti_hal_slot_free 20006
<4>ret slothandle = 20006
<4>pti_hal_slot_set_pid: 2 20006 6370
<4>pti_hal_slot_set_pid ok (pid 6370, tc = 8)
<4>pti_hal_slot_clear_pid slot = 6, tc = 8, num = 9
<4>pti_hal_slot_free 20006
<4>ret slothandle = 20006
<4>pti_hal_slot_set_pid: 2 20006 6370
<4>pti_hal_slot_set_pid ok (pid 6370, tc = 8)
<4>ret slothandle = 20009
<4>pti_hal_slot_set_pid: 2 20009 6300
<4>pti_hal_slot_set_pid ok (pid 6300, tc = 9)
<4>pti_hal_slot_clear_pid slot = 7, tc = 7, num = 10
<4>pti_hal_slot_free 20007
<4>pti_hal_slot_clear_pid slot = 9, tc = 7, num = 9
<4>pti_hal_slot_free 20009
<4>ret slothandle = 20007
<4>pti_hal_slot_set_pid: 2 20007 6300
<4>pti_hal_slot_set_pid ok (pid 6300, tc = 8)
<4>pti_hal_slot_clear_pid slot = 6, tc = 7, num = 9
<4>pti_hal_slot_free 20006
<4>pti_hal_slot_clear_pid slot = 5, tc = 4, num = 8
<4>pti_hal_slot_free 20005
<4>ret slothandle = 20005
<4>pti_hal_slot_set_pid: 2 20005 18
<4>pti_hal_slot_set_pid ok (pid 18, tc = 7)
<4>pti_hal_slot_clear_pid slot = 8, tc = 5, num = 8
<4>pti_hal_slot_free 20008
<4>pti_hal_slot_clear_pid slot = 7, tc = 4, num = 7
<4>pti_hal_slot_free 20007
<4>ret slothandle = 20006
<4>pti_hal_slot_set_pid: 2 20006 6300
<4>pti_hal_slot_set_pid ok (pid 6300, tc = 6)
<4>aotom_write_rtc 10 - aotom_write_rtc -> 1573153616
<4>pti_hal_slot_clear_pid slot = 0, tc = 0, num = 7
<4>pti_hal_slot_free 20000
<4>ret slothandle = 20000
<4>pti_hal_slot_set_pid: 2 20000 3842
<4>pti_hal_slot_set_pid ok (pid 3842, tc = 6)
<4>ret slothandle = 20007
<4>pti_hal_slot_set_pid: 2 20007 3003
<4>pti_hal_slot_set_pid ok (pid 3003, tc = 7)
<4>pti_hal_slot_clear_pid slot = 5, tc = 5, num = 8
<4>pti_hal_slot_free 20005
<4>ret slothandle = 20005
<4>pti_hal_slot_set_pid: 2 20005 18
<4>pti_hal_slot_set_pid ok (pid 18, tc = 7)
<4>pti_hal_slot_clear_pid slot = 5, tc = 7, num = 8
<4>pti_hal_slot_free 20005
<4>ret slothandle = 20005
<4>pti_hal_slot_set_pid: 2 20005 18
<4>pti_hal_slot_set_pid ok (pid 18, tc = 7)
<4>pti_hal_slot_clear_pid slot = 5, tc = 7, num = 8
<4>pti_hal_slot_free 20005
<4>ret slothandle = 20005
<4>pti_hal_slot_set_pid: 2 20005 18
<4>pti_hal_slot_set_pid ok (pid 18, tc = 7)
<4>ret slothandle = 20008
<4>pti_hal_slot_set_pid: 2 20008 5000
<4>pti_hal_slot_set_pid ok (pid 5000, tc = 8)
<4>pti_hal_slot_clear_pid slot = 8, tc = 8, num = 9
<4>pti_hal_slot_free 20008
<4>ret slothandle = 20008
<4>pti_hal_slot_set_pid: 2 20008 5000
<4>pti_hal_slot_set_pid ok (pid 5000, tc = 8)
<4>ret slothandle = 20009
<4>pti_hal_slot_set_pid: 2 20009 57
<4>pti_hal_slot_set_pid ok (pid 57, tc = 9)
<4>pti_hal_slot_clear_pid slot = 5, tc = 7, num = 10
<4>pti_hal_slot_free 20005
<4>ret slothandle = 20005
<4>pti_hal_slot_set_pid: 2 20005 18
<4>pti_hal_slot_set_pid ok (pid 18, tc = 9)
<4>pti_hal_slot_clear_pid slot = 8, tc = 8, num = 10
<4>pti_hal_slot_free 20008
<4>ret slothandle = 20008
<4>pti_hal_slot_set_pid: 2 20008 5000
<4>pti_hal_slot_set_pid ok (pid 5000, tc = 9)
<4>pti_hal_slot_clear_pid slot = 8, tc = 9, num = 10
<4>pti_hal_slot_free 20008
<4>pti_hal_slot_clear_pid slot = 0, tc = 6, num = 9
<4>pti_hal_slot_free 20000
<4>pti_hal_slot_clear_pid slot = 7, tc = 5, num = 8
<4>pti_hal_slot_free 20007
<4>pti_hal_slot_clear_pid slot = 9, tc = 5, num = 7
<4>pti_hal_slot_free 20009
<4>pti_hal_slot_clear_pid slot = 5, tc = 5, num = 6
<4>pti_hal_slot_free 20005
<4>ret slothandle = 20000
<4>pti_hal_slot_set_pid: 2 20000 18
<4>pti_hal_slot_set_pid ok (pid 18, tc = 5)
<4>pti_hal_slot_clear_pid slot = 0, tc = 5, num = 6
<4>pti_hal_slot_free 20000
<4>ret slothandle = 20000
<4>pti_hal_slot_set_pid: 2 20000 18
<4>pti_hal_slot_set_pid ok (pid 18, tc = 5)
<4>pti_hal_slot_clear_pid slot = 6, tc = 0, num = 6
<4>pti_hal_slot_free 20006
<4>pti_hal_slot_clear_pid slot = 4, tc = 4, num = 5
<4>pti_hal_slot_free 20004
<4>pti_hal_slot_clear_pid slot = 0, tc = 0, num = 4
<4>pti_hal_slot_free 20000
<4>pti_hal_slot_clear_pid slot = 2, tc = 2, num = 3
<4>pti_hal_slot_free 20002
<4>pti_hal_slot_clear_pid slot = 1, tc = 1, num = 2
<4>pti_hal_slot_free 20001
<4>pti_hal_slot_clear_pid slot = 3, tc = 0, num = 1
<4>pti_hal_slot_free 20003
<7>ksound: Set parameters for hw:0,2 to 2 x 48000hz with period 1536 (of 4608)
<7>ksound: Set parameters for hw:0,1 to 2 x 48000hz with period 1536 (of 4608)
<7>ksound: Set parameters for hw:0,0 to 2 x 48000hz with period 1536 (of 4608)
<4>source 1, session_handle 2
<4>before
<4>internal->demux[0] = 0x88038e9c
<4>internal->demux_tag[0] = 0
<4>internal->demux[1] = 0x88038914
<4>internal->demux_tag[1] = 2
<4>internal->demux[2] = 0x8803838c
<4>internal->demux_tag[2] = 1
<4>internal->demux[3] = 0x0
<4>internal->demux_tag[3] = 3
<7>reset_tsm: 1 numRunningFeeds: 0 => calling stm_tsm_init(1)
<7>[TSM] reinit stream routing...
<4>ret slothandle = 20000
<4>pti_hal_slot_set_pid: 2 20000 20
<4>pti_hal_slot_set_pid ok (pid 20, tc = 0)
<4>ret slothandle = 20001
<4>pti_hal_slot_set_pid: 2 20001 6323
<4>pti_hal_slot_set_pid ok (pid 6323, tc = 1)
<7>Find spdif_bypass control at 88d51380
<4>ret slothandle = 20002
<4>pti_hal_slot_set_pid: 2 20002 6310
<4>pti_hal_slot_set_pid ok (pid 6310, tc = 2)
<4>ret slothandle = 20003
<4>pti_hal_slot_set_pid: 2 20003 6330
<4>pti_hal_slot_set_pid ok (pid 6330, tc = 3)
<4>ret slothandle = 20004
<4>pti_hal_slot_set_pid: 2 20004 0
<4>pti_hal_slot_set_pid ok (pid 0, tc = 4)
<7>ksound: Set parameters for hw:0,2 to 2 x 48000hz with period 1536 (of 4608)
<7>ksound: Set parameters for hw:0,1 to 2 x 48000hz with period 1536 (of 4608)
<7>ksound: Set parameters for hw:0,0 to 2 x 48000hz with period 1536 (of 4608)
<4>ret slothandle = 20005
<4>pti_hal_slot_set_pid: 2 20005 18
<4>pti_hal_slot_set_pid ok (pid 18, tc = 5)
<4>pti_hal_slot_clear_pid slot = 4, tc = 4, num = 6
<4>pti_hal_slot_free 20004
<4>ret slothandle = 20004
<4>pti_hal_slot_set_pid: 2 20004 0
<4>pti_hal_slot_set_pid ok (pid 0, tc = 5)
<4>pti_hal_slot_clear_pid slot = 4, tc = 5, num = 6
<4>pti_hal_slot_free 20004
<4>ret slothandle = 20004
<4>pti_hal_slot_set_pid: 2 20004 0
<4>pti_hal_slot_set_pid ok (pid 0, tc = 5)
<4>ret slothandle = 20006
<4>pti_hal_slot_set_pid: 2 20006 6300
<4>pti_hal_slot_set_pid ok (pid 6300, tc = 6)
<4>pti_hal_slot_clear_pid slot = 4, tc = 5, num = 7
<4>pti_hal_slot_free 20004
<4>ret slothandle = 20004
<4>pti_hal_slot_set_pid: 2 20004 0
<4>pti_hal_slot_set_pid ok (pid 0, tc = 6)
<4>pti_hal_slot_clear_pid slot = 6, tc = 5, num = 7
<4>pti_hal_slot_free 20006
<4>ret slothandle = 20006
<4>pti_hal_slot_set_pid: 2 20006 6370
<4>pti_hal_slot_set_pid ok (pid 6370, tc = 6)
<4>pti_hal_slot_clear_pid slot = 6, tc = 6, num = 7
<4>pti_hal_slot_free 20006
<4>ret slothandle = 20006
<4>pti_hal_slot_set_pid: 2 20006 6370
<4>pti_hal_slot_set_pid ok (pid 6370, tc = 6)
<4>ret slothandle = 20007
<4>pti_hal_slot_set_pid: 2 20007 6300
<4>pti_hal_slot_set_pid ok (pid 6300, tc = 7)
<4>pti_hal_slot_clear_pid slot = 4, tc = 5, num = 8
<4>pti_hal_slot_free 20004
<4>ret slothandle = 20004
<4>pti_hal_slot_set_pid: 2 20004 0
<4>pti_hal_slot_set_pid ok (pid 0, tc = 7)
<4>ret slothandle = 20008
<4>pti_hal_slot_set_pid: 2 20008 6100
<4>pti_hal_slot_set_pid ok (pid 6100, tc = 8)
<4>ret slothandle = 20009
<4>pti_hal_slot_set_pid: 2 20009 17
<4>pti_hal_slot_set_pid ok (pid 17, tc = 9)
<4>pti_hal_slot_clear_pid slot = 8, tc = 8, num = 10
<4>pti_hal_slot_free 20008
<4>pti_hal_slot_clear_pid slot = 7, tc = 5, num = 9
<4>pti_hal_slot_free 20007
<4>ret slothandle = 20007
<4>pti_hal_slot_set_pid: 2 20007 6300
<4>pti_hal_slot_set_pid ok (pid 6300, tc = 8)
<4>pti_hal_slot_clear_pid slot = 7, tc = 8, num = 9
<4>pti_hal_slot_free 20007
<4>ret slothandle = 20007
<4>pti_hal_slot_set_pid: 2 20007 6300
<4>pti_hal_slot_set_pid ok (pid 6300, tc = 8)
<4>pti_hal_slot_clear_pid slot = 6, tc = 6, num = 9
<4>pti_hal_slot_free 20006
<4>pti_hal_slot_clear_pid slot = 5, tc = 4, num = 8
<4>pti_hal_slot_free 20005
<4>ret slothandle = 20005
<4>pti_hal_slot_set_pid: 2 20005 18
<4>pti_hal_slot_set_pid ok (pid 18, tc = 7)
<4>pti_hal_slot_clear_pid slot = 9, tc = 5, num = 8
<4>pti_hal_slot_free 20009
<4>pti_hal_slot_clear_pid slot = 0, tc = 0, num = 7
<4>pti_hal_slot_free 20000
<4>pti_hal_slot_clear_pid slot = 5, tc = 5, num = 6
<4>pti_hal_slot_free 20005
<4>ret slothandle = 20000
<4>pti_hal_slot_set_pid: 2 20000 18
<4>pti_hal_slot_set_pid ok (pid 18, tc = 5)
<4>pti_hal_slot_clear_pid slot = 0, tc = 5, num = 6
<4>pti_hal_slot_free 20000
<4>ret slothandle = 20000
<4>pti_hal_slot_set_pid: 2 20000 18
<4>pti_hal_slot_set_pid ok (pid 18, tc = 5)
<4>(bpamemio_allocmem): data.mem_size = 519728
<4>
<4>(bpamemio_allocmem): data.mem_size = 794734
<4>
<4>(bpamemio_allocmem): data.mem_size = 638250
<4>
<7>Found mode to set 720p50 at 21
<7>Found mode to set 720p50 at 21
<7>Found mode to set 720p50 at 21
<4>pti_hal_slot_clear_pid slot = 7, tc = 0, num = 6
<4>pti_hal_slot_free 20007
<4>pti_hal_slot_clear_pid slot = 4, tc = 4, num = 5
<4>pti_hal_slot_free 20004
<4>pti_hal_slot_clear_pid slot = 0, tc = 0, num = 4
<4>pti_hal_slot_free 20000
<4>pti_hal_slot_clear_pid slot = 2, tc = 2, num = 3
<4>pti_hal_slot_free 20002
<4>pti_hal_slot_clear_pid slot = 1, tc = 1, num = 2
<4>pti_hal_slot_free 20001
<4>pti_hal_slot_clear_pid slot = 3, tc = 0, num = 1
<4>pti_hal_slot_free 20003
<7>ksound: Set parameters for hw:0,2 to 2 x 44100hz with period 1536 (of 4608)
<7>ksound: Set parameters for hw:0,1 to 2 x 44100hz with period 1536 (of 4608)
<7>ksound: Set parameters for hw:0,0 to 2 x 44100hz with period 1536 (of 4608)
<7>Found mode to set 720p50 at 21
<7>Found mode to set 720p50 at 21
<7>Found mode to set 720p50 at 21
<4>source 1, session_handle 2
<4>before
<4>internal->demux[0] = 0x88038e9c
<4>internal->demux_tag[0] = 0
<4>internal->demux[1] = 0x88038914
<4>internal->demux_tag[1] = 2
<4>internal->demux[2] = 0x8803838c
<4>internal->demux_tag[2] = 1
<4>internal->demux[3] = 0x0
<4>internal->demux_tag[3] = 3
<4>(bpamemio_allocmem): data.mem_size = 794734
<4>
<4>(bpamemio_allocmem): data.mem_size = 276543
<4>
<7>Found mode to set 720p50 at 21
<7>Found mode to set 720p50 at 21
<7>Found mode to set 720p50 at 21
<7>ksound: Set parameters for hw:0,2 to 2 x 44100hz with period 1536 (of 4608)
<7>ksound: Set parameters for hw:0,1 to 2 x 44100hz with period 1536 (of 4608)
<7>ksound: Set parameters for hw:0,0 to 2 x 44100hz with period 1536 (of 4608)
<7>reset_tsm: 1 numRunningFeeds: 0 => calling stm_tsm_init(1)
<7>[TSM] reinit stream routing...
<4>ret slothandle = 20000
<4>pti_hal_slot_set_pid: 2 20000 20
<4>pti_hal_slot_set_pid ok (pid 20, tc = 0)
<4>pti_hal_slot_clear_pid slot = 0, tc = 0, num = 1
<4>pti_hal_slot_free 20000
<4>VideoIoctlFlush NonBlock=0
<5>Unaligned userspace access in "playthread" pid=1668 pc=0x2d13b976 ins=0x5a11
<5>Sending SIGBUS to "playthread" due to unaligned access (PC 2d13b976 PR 2d13bf72)


Re: [eDVBPESReader] ERROR reading PES #4 rantanplan

  • Senior Member
  • 186 posts

+5
Neutral

Posted 5 December 2019 - 14:05

Enable debug seems to solve the problem, if it is helpful somewhere else.






0 user(s) are reading this topic

0 members, 0 guests, 0 anonymous users