Hi
where to get the plugin for have TX/RX Rate: 130Mbps / 78Mbps ???
I would like to follow for iptv.
Thanks
TX/RX Rate plugin
Started by fatmir, 19 Nov 2019 20:54
14 replies to this topic
Re: TX/RX Rate plugin #2
-
- PLi® Core member
- 71,191 posts
+1,842
Excellent
Posted 19 November 2019 - 22:16
Never seen one. Which doesn't mean it doesn't exist. 
Currently in use: VU+ Duo 4K (2xFBC S2), VU+ Solo 4K (1xFBC S2), uClan Usytm 4K Ultimate (S2+T2), Octagon SF8008 (S2+T2), Zgemma H9.2H (S2+T2)
Due to my bad health, I will not be very active at times and may be slow to respond. I will not read the forum or PM on a regular basis.
Many answers to your question can be found in our new and improved wiki.
Re: TX/RX Rate plugin #3
-
- Senior Member
- 1,128 posts
+34
Good
Posted 20 November 2019 - 08:43
Hi,
gutemine once developed a band with monitor which should do what you want but the bwmon was written 2009 I do not know if it is still working or if there is a newer version.
Ralf
Re: TX/RX Rate plugin #4
-
- PLi® Core member
- 57,571 posts
+709
Excellent
Posted 20 November 2019 - 09:18
When he made it then I guess it is closed source and the might be a time bomb included
I would 'say' as work-a-round use your phone or tablet on the same WiFi and when the box is cabled (which is recommended) check the bandwidth on your PC to indicate the WWW-bandwidth you have available...
WaveFrontier 28.2E | 23.5E | 19.2E | 16E | 13E | 10/9E | 7E | 5E | 1W | 4/5W | 15W
Re: TX/RX Rate plugin #5
-
- Senior Member
- 1,143 posts
+32
Good
Posted 20 November 2019 - 09:23
I have this one, but it doesn't work fine...
Attached Files
-
enigma2-plugin-extensions-bwmon_0.3_all.ipk 4.08KB
5 downloads
Enigma is getting old....
Spoiler
Re: TX/RX Rate plugin #6
-
- PLi® Core member
- 57,571 posts
+709
Excellent
Posted 20 November 2019 - 09:26
There are plain py's included and it is 10 years old code.
WaveFrontier 28.2E | 23.5E | 19.2E | 16E | 13E | 10/9E | 7E | 5E | 1W | 4/5W | 15W
Re: TX/RX Rate plugin #7
-
- Senior Member
- 1,143 posts
+32
Good
Posted 20 November 2019 - 09:48
Sorry, yes, it works. colours should be changed and plugin screen size should be increased. Sure It was designed when HD skins where 1280x720, so it's small.
Enigma is getting old....
Spoiler
Re: TX/RX Rate plugin #8
-
- PLi® Core member
- 57,571 posts
+709
Excellent
Posted 20 November 2019 - 10:01
It does not work at all... It just counts the RX/TX bytes received/send by the box. It does not measure bandwidth from the box to the WWW.
WaveFrontier 28.2E | 23.5E | 19.2E | 16E | 13E | 10/9E | 7E | 5E | 1W | 4/5W | 15W
Re: TX/RX Rate plugin #9
-
- Senior Member
- 1,279 posts
+89
Good
Re: TX/RX Rate plugin #10
-
- PLi® Core member
- 57,571 posts
+709
Excellent
Posted 20 November 2019 - 10:13
At least from the console this works...
Now a volunteer who is willing to add a E2 User Interface around this
root@vuultimo4k:~# wget https://raw.githubusercontent.com/sivel/speedtest-cli/master/speedtest.py Connecting to raw.githubusercontent.com (151.101.112.133:443) speedtest.py 100% |*****************************************************************************************| 65018 0:00:00 ETA root@vuultimo4k:~# python speedtest.py Retrieving speedtest.net configuration... Testing from Tele2 Nederland (###.###.###.###)... Retrieving speedtest.net server list... Selecting best server based on ping... Hosted by TriNed B.V. (Sint-Oedenrode) [##.## km]: 28.849 ms Testing download speed................................................................................ Download: 50.14 Mbit/s Testing upload speed................................................................................................ Upload: 50.98 Mbit/s root@vuultimo4k:~#\
Edited by littlesat, 20 November 2019 - 10:14.
WaveFrontier 28.2E | 23.5E | 19.2E | 16E | 13E | 10/9E | 7E | 5E | 1W | 4/5W | 15W
Re: TX/RX Rate plugin #11
-
- Senior Member
- 1,128 posts
+34
Good
Posted 20 November 2019 - 10:14
Hi,
It does not work at all... It just counts the RX/TX bytes received/send by the box. It does not measure bandwidth from the box to the WWW.
adding bandwidth when you have send/received bytes is not a magically trick. At least you have a base to start with.
Ralf
Re: TX/RX Rate plugin #12
-
- Senior Member
- 1,128 posts
+34
Good
Posted 20 November 2019 - 10:16
Hi,
At least from the console this works...
I understood the thread starter that he wanted to see which bitrates are used while he streams and not the possible bitrate.
Ralf
Re: TX/RX Rate plugin #13
-
- Senior Member
- 1,143 posts
+32
Good
Posted 20 November 2019 - 10:33
It does not work at all... It just counts the RX/TX bytes received/send by the box. It does not measure bandwidth from the box to the WWW.
Yes, but this plugin was designed to show the RX TX bytes from the box.
Enigma is getting old....
Spoiler
Re: TX/RX Rate plugin #14
-
- Senior Member
- 1,143 posts
+32
Good
Posted 20 November 2019 - 10:34
Hi,
At least from the console this works...
I understood the thread starter that he wanted to see which bitrates are used while he streams and not the possible bitrate.
Ralf
I understood it in that way too.
Enigma is getting old....
Spoiler
Re: TX/RX Rate plugin #15
-
- PLi® Core member
- 57,571 posts
+709
Excellent
Posted 20 November 2019 - 11:17
Then Gutemine's plugin is the tool...
WaveFrontier 28.2E | 23.5E | 19.2E | 16E | 13E | 10/9E | 7E | 5E | 1W | 4/5W | 15W
1 user(s) are reading this topic
0 members, 1 guests, 0 anonymous users
