337 replies to this topic

[WanWizard]

Added to develop.

[zool]

Thank you both.

I tried the symlink but didn't solve the problem.

When I get some time over next few days I will temporarily try another image just to rule some external stuff out and will report back.

 

Happy to test/try anything in the mean time.

 

Thanks.

[zool]

Hi, just an update on the mgcamd1.45c issue.

I installed openatv6.4 (horrid image) and mgcamd1.45c is working ok.

So unless it's just me - I think there is a compatibility issue with mgcamd and OpenPLI.

Oscam is working fine though so I'll stick with that.

 

Just ask if there's anything I can test/try.

 

Thanks.

[littlesat]

Why is the ancient mgcamd so mandatory for you?
In our develop image (non public) a softlink work-a-round is added maybe we should consider to cherry pick this to release?

Edited by littlesat, 30 April 2020 - 19:48.

[WanWizard]

Hi, just an update on the mgcamd1.45c issue.

 

Please define "not work".

 

Doesn't it start? If so, start it from the commandline and post the error messages?

Does it start but not decode?

 

Why is the ancient mgcamd so mandatory for you?
In our develop image (non public) a softlink work-a-round is added maybe we should consider to cherry pick this to release?

 

(S)he wrote "I tried the symlink but it doesn't work".

[LraiZer]

OpenPLi 7.2-Release (2020-04-20) on zgemma h2h and Mgcamd1.45c starts, decodes and clears just fine once the symlink has been created by the command in post #259. The cam will not start at all in OpenPLI 7.2 without the symlink to 0.9.7 so would be good to fix this in release.

[WanWizard]

Cherry-picked into 7.2-release for this weekends build: https://github.com/O...c26db2489d97509

[zool]

Hi,

 

I tried the symlink command in post #259.

root@firetv:~# /etc/init.d/softcam start
/usr/bin/mgcamd is already running
943

root@firetv:~# /etc/init.d/softcam stop
stopped /usr/bin/mgcamd (pid 943)

root@firetv:~# /etc/init.d/softcam start
Mgcamd v1.45c [ LONG ECM ] by mixvt (Apr 19 2019) for cardsharing.cc
[mg] Net:1:7:2:5s Show ecm:1, emm:1 Up:2 Au:1 Dir:0 Osd:no:80:0 Cache:7 Log:3:17                                                                                                 2.16.1.1:28007 Reread:0
[mg] Ecm cache time: 15
Box type: mips dreambox (dm7025, dm800)
root@firetv:~# Conax.Key error 2: No such file or directory
SoftCam.Key error 2: No such file or directory
AutoRoll.Key error 2: No such file or directory
Conax.Key error 2: No such file or directory
[config] newcamd route = user:ip:password
newcamd keep alive: 0, incoming port: 0
[mgcam] emm thread started
[newcamd] Connecting to ip:password...
[newcamd] Login to ip:password as user accepted (44ms)
[newcamd] Card data from ip:password (63ms):
        Userid 239 caid 1841 providers 1
        Idents: 000000

[newcamd] ip:password new card: 1841 000000.
[newcamd] ip:password new card: 1841 000000.
[newcamd] ip:password new card: 1841 000000.
[newcamd] ip:password new card: 1841 000000.
[newcamd] ip:password new card: 1841 000000.
[newcamd] ip:password new card: 1841 000000.
got 75 cmd 9F
[mg0] namespace FFFF0000 t-id 1A on-id F020
[mg0] descramble on 1, source 0
[mg0] service A2B index 0 pmt pid 27 (1), pids: video 0x0135, audio  0x014B 0x01                                                                                                 55 0x015F
[mg0] ECM: CaID: 0x1841  -> CaPID: 0x139A ProvID: 000000
[mg0] ECM: CaID: 0x1850  -> CaPID: 0x1976 ProvID: 000000
[mg0] network can't decode
[mg0] pid 0x139A failed to decode.
[mg0] network can't decode
[mg0] pid 0x1976 failed to decode.
[mgcamd] emm started
*EMM: CaID: 0x1841  -> CaPID: 0x0081 ProvID: 000000
*EMM: CaID: 0x1850  -> CaPID: 0x0080 ProvID: 000000

mgcamd1.45c started but does not clear caid 1841
This is just feedback, I thought team may be interested as mgcamd145c seems to clear for me on openatv.

 

It is not important as oscam is working for me.

[WanWizard]

From that log I can deduct mgcamd itself runs fine, it configured for an external share, and that fails to decode.

 

So more likely a config issue.

[littlejoech]

Hi,

 

I have have an issue with 7.2 and my Zgemma H9.2S with my old Infinity USB Unlimited cardreader. I've installed the enigma2-plugin-drivers-usbserial but I think that the kernel module "iuu-phoenix.ko" driver is missing? Is it possible to update the package please?

 

Thanks in advance!

 

(Cardreader linux sources code to build the driver are available on the web site. www . infinityusb. com  (Product Infinity USB Unlimited) 

 

Status:(no /dev/ttyUSBx)

 

root@h9:~# dmesg | grep tty

f8b00000.uart: ttyAMA0 at MMIO 0xf8b00000 (irq = 25, base_baud = 0) is a PL011 rev2

console [ttyAMA0] enabled

f8b02000.uart: ttyAMA1 at MMIO 0xf8b02000 (irq = 26, base_baud = 0) is a PL011 rev2

f8b03000.uart: ttyAMA2 at MMIO 0xf8b03000 (irq = 27, base_baud = 0) is a PL011 rev2

 

root@h9:~# dmesg | grep usb

usbcore: registered new interface driver usbfs

usbcore: registered new interface driver hub

usbcore: registered new device driver usb

usbcore: registered new interface driver asix

usbcore: registered new interface driver ax88179_178a

usbcore: registered new interface driver cdc_ether

usbcore: registered new interface driver dm9601

usbcore: registered new interface driver net1080

usbcore: registered new interface driver cdc_subset

usbcore: registered new interface driver zaurus

usbcore: registered new interface driver cdc_ncm

usb usb4: We don't know the algorithms for LPM for this host, disabling LPM.

usbcore: registered new interface driver usb-storage

usbcore: registered new interface driver usbserial

usbcore: registered new interface driver usbserial_generic

usbserial: USB Serial support registered for generic

usbcore: registered new interface driver usb_debug

usbserial: USB Serial support registered for debug

usbcore: registered new interface driver option

usbserial: USB Serial support registered for GSM modem (1-port)

usbcore: registered new interface driver pl2303

usbserial: USB Serial support registered for pl2303

usbcore: registered new interface driver xpad

usb 3-1: new high-speed USB device number 2 using xhci-hcd

usb 2-1: new full-speed USB device number 2 using ohci-platform

usbcore: registered new interface driver usbhid

usbhid: USB HID core driver

usbcore: registered new interface driver snd-usb-audio

usb 2-2: new full-speed USB device number 3 using ohci-platform

usbcore: registered new interface driver tpm

usbcore: registered new interface driver rtl8192eu

 

root@h9:~# lsusb

Bus 004 Device 001: ID 1d6b:0003 Linux Foundation 3.0 root hub

Bus 001 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub

Bus 003 Device 002: ID 0bda:818b Realtek Semiconductor Corp. ACT-WNP-UA-005 802.11b/g/n WLAN Adapter

Bus 003 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub

Bus 002 Device 003: ID 04a3:0101 Trident Microsystems, Inc.

Bus 002 Device 002: ID 104f:0004 WB Electronics Infinity Unlimited

Bus 002 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub

root@h9:~#

[WanWizard]

It is not enabled in the vendors linux kernel config:

# CONFIG_USB_SERIAL_IUU is not set

I'll see what I can do.

[kovy27]

Hello to all, I use OpenPli 7.2 RC version (openpli-enigma7.2Rc-dmSSL84_191025) on my Dreambox 800HD original (I hope I write my question on right place). Everything is OK but I can not playback almost no videos from Youtube. I have an Youtube plugin by Taapalk (enigma2-plugin-extensions-youtube_h1+git478+3e096e2-r0.0_all). It is strange I can playback some videos downloaded from Youtube in Public feeds category (not all maybe just the smaller ones) but from Search category almost on one. I use in-built Media player in this image. I have created with Swap Manager an additional memory on USB stick by size of 2 GB (formatted by Dreambox). I am already desperate that I can not playedback any videos from YuTube. I am attaching my crashlog. When I am trying to play youtube video so it says it is buffering and mostly it stops at some percentage level of buffering and sometimes it try to buffer for the second time but it always gets stuck and I have to reboot an receiver by unplugging. I will be grateful for every help or hint. Thank you very much, Regards.

Attached Files

•  enigma.20200502_reduced.debuglog.txt   42.94KB   7 downloads

Edited by kovy27, 2 May 2020 - 13:41.

[WanWizard]

@littlejoech,

 

Here you go.

Attached Files

•  kernel-module-iuu-phoenix-4.4.35_4.4.35-.8.1_h9.ipk   12.99KB   14 downloads

[littlejoech]

It is not enabled in the vendors linux kernel config:

# CONFIG_USB_SERIAL_IUU is not set

I'll see what I can do.

 

Thanks

[littlejoech]

@littlejoech,

 

Here you go.

Thanks!, I'm giving it a try.

[littlejoech]

 

@littlejoech,

 

Here you go.

Thanks!, I'm giving it a try.

 

Thanks bro!

 

usbcore: registered new interface driver iuu_phoenix

usbserial: USB Serial support registered for iuu_phoenix

iuu_phoenix 2-1:1.0: iuu_phoenix converter detected

usb 2-1: iuu_phoenix converter now attached to ttyUSB0

 

 

[WanWizard]

You're welcome.

[tigranbadalyan]

Hi

I have some problem in Pli 7.2, my receiver is Vu+ Uno 4K SE.

This kind of problem, I have IPTV bouquets in favorites with subdirectories for example

fav1

fav2

fav3

in the bouquet fav2 there are still subdirectories fav4 and fav5 and channels respectively in them.

If I use parental control on fav2 then the subdirectories fav4 and fav5 are duplicated in the list of parent favorites list 

fav1

fav2

fav3

fav4

fav5

but olso they are still in the fav2.

somehow it is possible to solve this problem so that fav4 and fav5 do not come out of the fav2

regards Tigran

 

 

[littlesat]

Enigma2 actually do not support subfolders in user bouquets list.... that explains when you try it you got them on one root directory.

[tigranbadalyan]

Enigma2 actually do not support subfolders in user bouquets list.... that explains when you try it you got them on one root directory.

here is supported, only problem is i got them on one root directory when adding to parental control

other ways is works correctly

Attached Files

•  1.jpg   110.16KB   5 downloads
•  2.jpg   103.01KB   6 downloads
•  3.jpg   187.75KB   6 downloads

Edited by tigranbadalyan, 7 May 2020 - 14:49.