Posted 17 January 2020 - 05:36
I'm using the latest OpenPLi 7.2 Image on the Edision OS Mio 4K, to try and tune the Hauppauge 950Q, I have the following drivers installed: "astc-usb-hauppauge (1.1-r0.1)" and "astc-usb-hauppauge-950q (1.1-r0.1)", but the Hardware is not displaying on Turner Configuration screen. It should be noted that the hardware displays on OpenVIX and scans in ATSC channels without any issues. Secondly, where can I download old versions of OeonPLi images? I can only find version 7.2 for download.
Posted 17 January 2020 - 13:10
........ the Edision is a relatively new receiver so unlikely that any „old“ versions provide support.
Gigablue Quad 4K & UE 4K, Vu+Uno4KSE, DM900
.........FBC Tuners:
------------------> GT-SAT unicable lnb to 1.5M dish(28.2E)
------------------> Gigablue unicable lnb to 80 cm dish(19.2E)
Octagon sf8008, AX HD61, Edision Osmio 4K+, Zgemma H9Combo using Legacy ports on multiswitches
Zgemma H9twin & Zgemma H9 C/S mode into Giga4K
Posted 17 January 2020 - 16:55
But do you have a link? It wouldn't hurt to try.
Edited by Babadem, 17 January 2020 - 16:56.
Posted 17 January 2020 - 17:03
Both drivers mentioned are standard linux kernel drivers, and as far as I can see, oe-a uses exactly the same.
First step is to check the dmesg output to see if the device is recognised. If not, looking at the rest is pointless...
Currently in use: VU+ Duo 4K (2xFBC S2), VU+ Solo 4K (1xFBC S2), uClan Usytm 4K Ultimate (S2+T2), Octagon SF8008 (S2+T2), Zgemma H9.2H (S2+T2)
Due to my bad health, I will not be very active at times and may be slow to respond. I will not read the forum or PM on a regular basis.
Many answers to your question can be found in our new and improved wiki.
Posted 17 January 2020 - 17:18
Support for Hauppauge ATSC 850 and 950Q was lost in kernel versions 5.2 and 5.3.
Support for Hauppauge ATSC 850 and 950Q was restored beginning with kernel version 5.4.
The OpenPLi image is using kernel 5.3 as of the 13th day of this month.
The Hauppauge 850 and 950Q should work correctly again once the kernel is updated in the OpenPLi image.
Posted 17 January 2020 - 17:28
The kernel version is dictated by the drivers, which in turn is dictated by the vendors BSP.
A BSP update in a release image is something we'd rather not do, it has to be carefully looked at.
Currently in use: VU+ Duo 4K (2xFBC S2), VU+ Solo 4K (1xFBC S2), uClan Usytm 4K Ultimate (S2+T2), Octagon SF8008 (S2+T2), Zgemma H9.2H (S2+T2)
Due to my bad health, I will not be very active at times and may be slow to respond. I will not read the forum or PM on a regular basis.
Many answers to your question can be found in our new and improved wiki.
Posted 17 January 2020 - 19:40
I have some OpenPLi images on my drive from last year that can be uploaded to the Internet if Babadem needs them. Or an OpenPLi image can be built...Anyway, we can get by until the next release.
Thanks.
Posted 17 January 2020 - 23:42
Posted 18 January 2020 - 00:56
These should work until things are updated. All of these multiboot images should have kernel 5.0 or less.
PLi_Images.zip 385.9 MB
https://mega.nz/#!Kx...E36dHGseYt7AmQ8
Posted 18 January 2020 - 05:57
These should work until things are updated. All of these multiboot images should have kernel 5.0 or less.
PLi_Images.zip 385.9 MB
https://mega.nz/#!Kx...E36dHGseYt7AmQ8
Thanks El Bandido. I highly appreciate it.
Posted 30 January 2020 - 03:36
These should work until things are updated. All of these multiboot images should have kernel 5.0 or less.
PLi_Images.zip 385.9 MB
https://mega.nz/#!Kx...E36dHGseYt7AmQ8
No luck with these. All the Images in the attached link caused the Receiver to be stuck in "BOOT" after adding the Hauppauge 950Q or 955Q driver and rebooting the receiver. Very strange behavior. 
Hauppauge 950Q
Edited by Babadem, 30 January 2020 - 03:38.
Posted 30 January 2020 - 12:51
Those images should not have such a problem.
How many usb devices do you have connected to the receiver?
Posted 30 January 2020 - 19:41
I only have one device the 950q besides a regular 15GB USB stick used for recording.
Posted 30 January 2020 - 21:28
The kernel for most of those images is 5.0. But the feeds are loading kernel 5.3, and this is why they do not work anymore.
screenshot_19700101010429.jpg 161.24KB
2 downloads
Edited by el bandido, 30 January 2020 - 21:28.
Posted 30 January 2020 - 22:27
There is a 7.3-release in the making with an upgrade to kernel 5.4.
Currently in use: VU+ Duo 4K (2xFBC S2), VU+ Solo 4K (1xFBC S2), uClan Usytm 4K Ultimate (S2+T2), Octagon SF8008 (S2+T2), Zgemma H9.2H (S2+T2)
Due to my bad health, I will not be very active at times and may be slow to respond. I will not read the forum or PM on a regular basis.
Many answers to your question can be found in our new and improved wiki.
Posted 1 April 2020 - 20:22
After installing the atsc-950q-usb-hauppague driver this is what is displayed "Tuner C: Auvitek AU8522 QAM/8VSB Frontend (DVB-C)" in the Tuner section. Nothing for ATSC.
0 members, 1 guests, 0 anonymous users
