Posted 10 November 2020 - 17:13
Waarom een work-around als de provider zich niet aan de standaard houdt? Je moet hier TriNed mee confronteren (of gewoon opzeggen, of er tenminste mee dreigen).
dit is toch geen work-around of vergis ik mij ( ontvanger te snel voor een tuner lock )
We would risk getting an SDT timeout in particular (2500ms) because we
did not wait for the channel to have a lock before starting the SDT
reader.
VU+ULTIMO4K/HD11/HD530C/HD51/multibox openpli 9.0
Posted 10 November 2020 - 19:40
Posted 11 November 2020 - 18:35
komen deze commits nog in openpli 7.3 of word het openpli 8.0 ?
VU+ULTIMO4K/HD11/HD530C/HD51/multibox openpli 9.0
Posted 11 November 2020 - 19:40
Dat wordt 8.0, die staat er aan te komen.
Currently in use: VU+ Duo 4K (2xFBC S2), VU+ Solo 4K (1xFBC S2), uClan Usytm 4K Pro (S2+T2), Octagon SF8008 (S2+T2), Zgemma H9.2H (S2+T2)
Due to my bad health, I will not be very active at times and may be slow to respond. I will not read the forum or PM on a regular basis.
Many answers to your question can be found in our new and improved wiki.
Posted 11 November 2020 - 20:02
vol verwachting klopt ons hart 
VU+ULTIMO4K/HD11/HD530C/HD51/multibox openpli 9.0
Posted 29 November 2020 - 19:41
heb nu een multibox 4k en in de multiboot openpli 7.3 en openpli 8.0 rc 2020-11-29
met een kabelscan met openpli 8.0 rc 277 zenders en met openpli 7.3 239 zenders met trined op e-fiber
ziet er goed uit met open pli 8.0 
een gedeelte van een log met open pli 8.0 277 zenders
[eDVBFrontend0] tune
[eDVBFrontend0] tuning to 304000 khz, sr 6875000, fec 0, modulation 5, inversion 2
[eDVBChannel] OURSTATE: tuning
[eDVBFrontend0] startTuneTimeout 5000
[eDVBFrontend0] setFrontend 1
[eDVBFrontend0] setting frontend
[eDVBFrontend0] fe event: status 0, inversion off, m_tuning 1
[eDVBFrontend0] fe event: status 1, inversion off, m_tuning 2
[eDVBFrontend0] fe event: status 1f, inversion off, m_tuning 3
[eDVBChannel] OURSTATE: ok
[eDVBDemux] open demux /dev/dvb/adapter0/demux0
[eDVBSectionReader] DMX_SET_FILTER pid=17
[eCableScan] SDTReady 0
[eCableScan] skip SID 1a9 on TSID 1 (which belongs to TSID 6 according to the NIT)
[eCableScan] skip SID 4ab on TSID 1 (which belongs to TSID 2d according to the NIT)
[eDVBFrontend0] tune
[eDVBFrontend0] tuning to 312000 khz, sr 6875000, fec 0, modulation 5, inversion 2
[eDVBChannel] OURSTATE: tuning
[eDVBFrontend0] startTuneTimeout 5000
[eDVBFrontend0] setFrontend 1
[eDVBFrontend0] setting frontend
[eDVBFrontend0] fe event: status 0, inversion off, m_tuning 1
[eDVBFrontend0] fe event: status 1, inversion off, m_tuning 2
[eDVBFrontend0] fe event: status 1f, inversion off, m_tuning 3
[eDVBChannel] OURSTATE: ok
[eDVBDemux] open demux /dev/dvb/adapter0/demux0
[eDVBSectionReader] DMX_SET_FILTER pid=17
[eCableScan] SDTReady 0
[eCableScan] skip SID 54 on TSID 2 (which belongs to TSID 22 according to the NIT)
[eDVBFrontend0] tune
[eDVBFrontend0] tuning to 320000 khz, sr 6875000, fec 0, modulation 5, inversion 2
[eDVBChannel] OURSTATE: tuning
[eDVBFrontend0] startTuneTimeout 5000
[eDVBFrontend0] setFrontend 1
[eDVBFrontend0] setting frontend
[eDVBFrontend0] fe event: status 0, inversion off, m_tuning 1
[eDVBFrontend0] fe event: status 1, inversion off, m_tuning 2
[eDVBFrontend0] fe event: status 1f, inversion off, m_tuning 3
[eDVBChannel] OURSTATE: ok
[eDVBDemux] open demux /dev/dvb/adapter0/demux0
en een gedeelte van een log met openpli 7.3 239 zenders
[eDVBFrontend0] tuning to 304000 khz, sr 6875000, fec 0, modulation 5, inversion 2
[eDVBChannel] OURSTATE: tuning
[eDVBDemux] open demux /dev/dvb/adapter0/demux0
[eDVBSectionReader] DMX_SET_FILTER pid=17
[eDVBFrontend0] startTuneTimeout 5000
[eDVBFrontend0] setFrontend 1
[eDVBFrontend0] setting frontend
[eDVBFrontend0] fe event: status 0, inversion off, m_tuning 1
[eDVBFrontend0] fe event: status 1, inversion off, m_tuning 2
[eDVBFrontend0] fe event: status 1f, inversion off, m_tuning 3
[eDVBChannel] OURSTATE: ok
[eCableScan] SDTReady 0
[eCableScan] skip SID 1a9 on TSID 1 (which belongs to TSID 6 according to the NIT)
[eCableScan] skip SID 4ab on TSID 1 (which belongs to TSID 2d according to the NIT)
[eDVBFrontend0] tune
[eDVBFrontend0] tuning to 312000 khz, sr 6875000, fec 0, modulation 5, inversion 2
[eDVBChannel] OURSTATE: tuning
[eDVBDemux] open demux /dev/dvb/adapter0/demux0
[eDVBSectionReader] DMX_SET_FILTER pid=17
[eDVBFrontend0] startTuneTimeout 5000
[eDVBFrontend0] setFrontend 1
[eDVBFrontend0] setting frontend
[eDVBFrontend0] fe event: status 0, inversion off, m_tuning 1
[eDVBFrontend0] fe event: status 1, inversion off, m_tuning 2
[eDVBFrontend0] fe event: status 1f, inversion off, m_tuning 3
[eDVBChannel] OURSTATE: ok
[eCableScan] SDTReady -1
[eDVBFrontend0] tune
[eDVBFrontend0] tuning to 320000 khz, sr 6875000, fec 0, modulation 5, inversion 2
[eDVBChannel] OURSTATE: tuning
[eDVBDemux] open demux /dev/dvb/adapter0/demux0
[eDVBSectionReader] DMX_SET_FILTER pid=17
[eDVBFrontend0] startTuneTimeout 5000
[eDVBFrontend0] setFrontend 1
[eDVBFrontend0] setting frontend
[eDVBFrontend0] fe event: status 0, inversion off, m_tuning 1
[eDVBFrontend0] fe event: status 1, inversion off, m_tuning 2
[eDVBFrontend0] fe event: status 1f, inversion off, m_tuning 3
[eDVBChannel] OURSTATE: ok
[eCableScan] SDTReady 0
[eDVBFrontend0] tune
openpli 8.0rc 277.txt 45.7KB
0 downloads
openpli 7.3 239.txt 40.69KB
0 downloads
VU+ULTIMO4K/HD11/HD530C/HD51/multibox openpli 9.0
0 members, 1 guests, 0 anonymous users
