Jump to content


Photo

trined kabeltex sid not found in pat

Started by teo1966, 24 Jan 2020 17:35

  • Please log in to reply
145 replies to this topic

Re: trined kabeltex sid not found in pat #101 teo1966

  • Senior Member
  • 1,116 posts

+10
Neutral

Posted 9 August 2020 - 10:08

ik heb een vraag hoe werkt de instelling activeer de automatische kabelscan bij trined / ziggo ?

als ik de automatische kabelscan aan zet dan varieert het aantal zenders    bv de ene keer heb ik wel NPO 1HD en dan weer niet

dat is ook het geval met de kabelscan


VU+ULTIMO4K/HD11/HD530C/HD51/multibox openpli 9.0

Re: trined kabeltex sid not found in pat #102 WanWizard

  • PLi® Core member
  • 71,236 posts

+1,842
Excellent

Posted 9 August 2020 - 11:39

Marginaal or storing op een bepaalde "transponder" frequentie?

 

Mijn ouders hebben dat ook, alles komt prima binnen, behalve de frequentie waar de BBC's op zitten, die hebben last van de DVB-T antenne die op een kilometer staat (en ze hebben 20 jaar oude coax in de muur, zonder voldoende afscherming).


Currently in use: VU+ Duo 4K (2xFBC S2), VU+ Solo 4K (1xFBC S2), uClan Usytm 4K Ultimate (S2+T2), Octagon SF8008 (S2+T2), Zgemma H9.2H (S2+T2)

Due to my bad health, I will not be very active at times and may be slow to respond. I will not read the forum or PM on a regular basis.

Many answers to your question can be found in our new and improved wiki.

Re: trined kabeltex sid not found in pat #103 teo1966

  • Senior Member
  • 1,116 posts

+10
Neutral

Posted 9 August 2020 - 12:56

is verschillend op de frec 304  zit npohd1 , eurosport 2 hd , nickjr die vallen dan weg

bv op frec 552 zit fox1 , fox2 , fox3

dit is bij mijn vu ultimo4k en ook bij mij 500c draaien allerbij openpli 7.3

als ik bij mijn 500c scan heb ik 275 zenders en bij mijn ultimo4k 172 zenders bijna op dezelfde tijd gescant


VU+ULTIMO4K/HD11/HD530C/HD51/multibox openpli 9.0

Re: trined kabeltex sid not found in pat #104 WanWizard

  • PLi® Core member
  • 71,236 posts

+1,842
Excellent

Posted 9 August 2020 - 13:14

Zegt op zich niks, de ene tuner is de andere niet, vooral de FBC tuners lijken minder gevoelig te zijn, en hebben derhalve een beter signaal nodig.


Currently in use: VU+ Duo 4K (2xFBC S2), VU+ Solo 4K (1xFBC S2), uClan Usytm 4K Ultimate (S2+T2), Octagon SF8008 (S2+T2), Zgemma H9.2H (S2+T2)

Due to my bad health, I will not be very active at times and may be slow to respond. I will not read the forum or PM on a regular basis.

Many answers to your question can be found in our new and improved wiki.

Re: trined kabeltex sid not found in pat #105 teo1966

  • Senior Member
  • 1,116 posts

+10
Neutral

Posted 9 August 2020 - 13:39

oke dat begrijp ik maar wat is de reden dat de ene keer wel 275 zenders bij beide boxen en dan bij de ene wel 275 zenders en bij de ander niet

nu bij de 500c 275 zenders en bij de ultimo4k 172 , 168 , 172  zenders  dit varieert


VU+ULTIMO4K/HD11/HD530C/HD51/multibox openpli 9.0

Re: trined kabeltex sid not found in pat #106 WanWizard

  • PLi® Core member
  • 71,236 posts

+1,842
Excellent

Posted 9 August 2020 - 13:40

Marginaal signaal, dan een beetje fluctueert (bv door externe storing).

 

Waarschijnlijk zul je, als je op een van die 4 zenders die soms gevonden worden, ook flink wat blokvorming zien...


Currently in use: VU+ Duo 4K (2xFBC S2), VU+ Solo 4K (1xFBC S2), uClan Usytm 4K Ultimate (S2+T2), Octagon SF8008 (S2+T2), Zgemma H9.2H (S2+T2)

Due to my bad health, I will not be very active at times and may be slow to respond. I will not read the forum or PM on a regular basis.

Many answers to your question can be found in our new and improved wiki.

Re: trined kabeltex sid not found in pat #107 teo1966

  • Senior Member
  • 1,116 posts

+10
Neutral

Posted 9 August 2020 - 13:43

dit probleem is niet alleen op mijn adres met ziggo is er geen probleem met trined op e-fiber wel 


VU+ULTIMO4K/HD11/HD530C/HD51/multibox openpli 9.0

Re: trined kabeltex sid not found in pat #108 teo1966

  • Senior Member
  • 1,116 posts

+10
Neutral

Posted 31 August 2020 - 21:43

het probleem is er nog steeds heb de de automatische kabelscan maar uitgezet ( de kabel zender lijst varieert  ) 

heb een andere cables lijst er in gezet ( komt van sat4all ) probleem blijft

de config van de tuner ook verandert staat op 2000 / provider / alles / kabeltex(trined,land  van cuijk) dit is met de ander cables.xml

bij automatische zoeken krijg ik 379 zenders met de kabelscan 206 zenders

 

iemand nog een idee of wat tips ?


VU+ULTIMO4K/HD11/HD530C/HD51/multibox openpli 9.0

Re: trined kabeltex sid not found in pat #109 teo1966

  • Senior Member
  • 1,116 posts

+10
Neutral

Posted 1 September 2020 - 09:05

deze was ik vergeten :)

Attached Files


VU+ULTIMO4K/HD11/HD530C/HD51/multibox openpli 9.0

Re: trined kabeltex sid not found in pat #110 teo1966

  • Senior Member
  • 1,116 posts

+10
Neutral

Posted 1 September 2020 - 12:55

heb maar eens wat logs gemaakt zie bijlage met de hd500c 275 zenders en met de vu ultimo 206 zenders

 

een gedeelte van de log van de vu ultimo

 

[eDVBFrontend0] tune
[eDVBFrontend0] tuning to 304000 khz, sr 6875000, fec 0, modulation 5, inversion 2
[eDVBFrontend0] tune setting type to 1 from 0
[eDVBChannel] OURSTATE: tuning
[eDVBDemux] open demux /dev/dvb/adapter0/demux1
[eDVBSectionReader] DMX_SET_FILTER pid=16
[eDVBFrontend0] startTuneTimeout 5000
[eDVBFrontend0] setFrontend 1
[eDVBFrontend0] setting frontend
[eDVBFrontend0] fe event: status 0, inversion off, m_tuning 1
[eDVBFrontend0] fe event: status 1f, inversion off, m_tuning 2
[eDVBChannel] OURSTATE: ok
[eConsoleAppContainer] Starting /usr/bin/grab
[eCableScan] NITReady 0
[eDVBFrontendParametersCable] Cable freq 304000, mod 5, sr 6875000, fec 0
[eDVBFrontendParametersCable] Cable freq 312000, mod 5, sr 6875000, fec 0
[eDVBFrontendParametersCable] Cable freq 320000, mod 5, sr 6875000, fec 0
[eDVBFrontendParametersCable] Cable freq 328000, mod 5, sr 6875000, fec 0
[eDVBFrontendParametersCable] Cable freq 336000, mod 5, sr 6875000, fec 0
[eDVBFrontendParametersCable] Cable freq 344000, mod 5, sr 6875000, fec 0
[eDVBFrontendParametersCable] Cable freq 352000, mod 5, sr 6875000, fec 0
[eDVBFrontendParametersCable] Cable freq 360000, mod 5, sr 6875000, fec 0
[eDVBFrontendParametersCable] Cable freq 368000, mod 5, sr 6875000, fec 0
[eDVBFrontendParametersCable] Cable freq 376000, mod 5, sr 6875000, fec 0
[eDVBFrontendParametersCable] Cable freq 384000, mod 5, sr 6875000, fec 0
[eDVBFrontendParametersCable] Cable freq 392000, mod 5, sr 6875000, fec 0
[eDVBFrontendParametersCable] Cable freq 400000, mod 5, sr 6875000, fec 0
[eDVBFrontendParametersCable] Cable freq 408000, mod 5, sr 6875000, fec 0
[eDVBFrontendParametersCable] Cable freq 416000, mod 5, sr 6875000, fec 0
[eDVBFrontendParametersCable] Cable freq 424000, mod 5, sr 6875000, fec 0
[eDVBFrontendParametersCable] Cable freq 440000, mod 5, sr 6875000, fec 0
[eDVBFrontendParametersCable] Cable freq 448000, mod 5, sr 6875000, fec 0
[eDVBFrontendParametersCable] Cable freq 456000, mod 5, sr 6875000, fec 0
[eDVBFrontendParametersCable] Cable freq 464000, mod 5, sr 6875000, fec 0
[eDVBFrontendParametersCable] Cable freq 472000, mod 5, sr 6875000, fec 0
[eDVBFrontendParametersCable] Cable freq 480000, mod 5, sr 6875000, fec 0
[eDVBFrontendParametersCable] Cable freq 488000, mod 5, sr 6875000, fec 0
[eDVBFrontendParametersCable] Cable freq 496000, mod 5, sr 6875000, fec 0
[eDVBFrontendParametersCable] Cable freq 512000, mod 5, sr 6875000, fec 0
[eDVBFrontendParametersCable] Cable freq 520000, mod 5, sr 6875000, fec 0
[eDVBFrontendParametersCable] Cable freq 528000, mod 5, sr 6875000, fec 0
[eDVBFrontendParametersCable] Cable freq 536000, mod 5, sr 6875000, fec 0
[eDVBFrontendParametersCable] Cable freq 544000, mod 5, sr 6875000, fec 0
[eDVBFrontendParametersCable] Cable freq 552000, mod 5, sr 6875000, fec 0
[eDVBFrontendParametersCable] Cable freq 560000, mod 5, sr 6875000, fec 0
[eDVBFrontendParametersCable] Cable freq 568000, mod 5, sr 6875000, fec 0
[eDVBFrontendParametersCable] Cable freq 576000, mod 5, sr 6875000, fec 0
[eDVBFrontendParametersCable] Cable freq 584000, mod 5, sr 6875000, fec 0
[eDVBFrontendParametersCable] Cable freq 592000, mod 5, sr 6875000, fec 0
[eDVBFrontendParametersCable] Cable freq 296000, mod 5, sr 6875000, fec 0
[eDVBFrontendParametersCable] Cable freq 608000, mod 5, sr 6875000, fec 0
[eDVBFrontendParametersCable] Cable freq 616000, mod 5, sr 6875000, fec 0
[eDVBFrontendParametersCable] Cable freq 624000, mod 5, sr 6875000, fec 0
[eDVBFrontendParametersCable] Cable freq 632000, mod 5, sr 6875000, fec 0
[eDVBFrontendParametersCable] Cable freq 640000, mod 5, sr 6875000, fec 0
[eDVBFrontendParametersCable] Cable freq 648000, mod 5, sr 6875000, fec 0
[eDVBFrontendParametersCable] Cable freq 272000, mod 5, sr 6875000, fec 0
[eDVBFrontendParametersCable] Cable freq 288000, mod 5, sr 6875000, fec 0
[eDVBFrontendParametersCable] Cable freq 280000, mod 5, sr 6875000, fec 0
[eDVBFrontend0] tune
[eDVBFrontend0] tuning to 304000 khz, sr 6875000, fec 0, modulation 5, inversion 2
[eDVBChannel] OURSTATE: tuning
[eDVBDemux] open demux /dev/dvb/adapter0/demux1
[eDVBSectionReader] DMX_SET_FILTER pid=17
[eDVBFrontend0] startTuneTimeout 5000
[eDVBFrontend0] setFrontend 1
[eDVBFrontend0] setting frontend
[eDVBFrontend0] fe event: status 0, inversion off, m_tuning 1
[eDVBFrontend0] fe event: status 1f, inversion off, m_tuning 2
[eDVBChannel] OURSTATE: ok
[eCableScan] SDTReady 0
[eCableScan] skip SID 1a9 on TSID 1 (which belongs to TSID 6 according to the NIT)
[eCableScan] skip SID 4ab on TSID 1 (which belongs to TSID 2d according to the NIT)
[eDVBFrontend0] tune
[eDVBFrontend0] tuning to 312000 khz, sr 6875000, fec 0, modulation 5, inversion 2
[eDVBChannel] OURSTATE: tuning
[eDVBDemux] open demux /dev/dvb/adapter0/demux1
[eDVBSectionReader] DMX_SET_FILTER pid=17
[eDVBFrontend0] startTuneTimeout 5000
[eDVBFrontend0] setFrontend 1
[eDVBFrontend0] setting frontend
[eDVBFrontend0] fe event: status 0, inversion off, m_tuning 1
[eDVBFrontend0] fe event: status 1f, inversion off, m_tuning 2
[eDVBChannel] OURSTATE: ok
[eCableScan] SDTReady 0
[eCableScan] skip SID 54 on TSID 2 (which belongs to TSID 22 according to the NIT)
[eDVBFrontend0] tune
[eDVBFrontend0] tuning to 320000 khz, sr 6875000, fec 0, modulation 5, inversion 2
[eDVBChannel] OURSTATE: tuning
[eDVBDemux] open demux /dev/dvb/adapter0/demux1
[eDVBSectionReader] DMX_SET_FILTER pid=17
[eDVBFrontend0] startTuneTimeout 5000
[eDVBFrontend0] setFrontend 1
[eDVBFrontend0] setting frontend
[eDVBFrontend0] fe event: status 0, inversion off, m_tuning 1
[eDVBFrontend0] fe event: status 1f, inversion off, m_tuning 2
[eDVBChannel] OURSTATE: ok
[eCableScan] SDTReady -1

[eDVBFrontend0] tune
[eDVBFrontend0] tuning to 320000 khz, sr 6875000, fec 0, modulation 5, inversion 2
[eDVBChannel] OURSTATE: tuning
[eDVBDemux] open demux /dev/dvb/adapter0/demux0
[eDVBSectionReader] DMX_SET_FILTER pid=17
[eDVBFrontend0] startTuneTimeout 5000
[eDVBFrontend0] setFrontend 1
[eDVBFrontend0] setting frontend
[eDVBFrontend0] fe event: status 0, inversion off, m_tuning 1
[eDVBFrontend0] fe event: status 1f, inversion off, m_tuning 2
[eDVBChannel] OURSTATE: ok
[eCableScan] SDTReady 0
[eDVBFrontend0] tune
[eDVBFrontend0] tuning to 344000 khz, sr 6875000, fec 0, modulation 5, inversion 2
[eDVBChannel] OURSTATE: tuning
[eDVBDemux] open demux /dev/dvb/adapter0/demux1
[eDVBSectionReader] DMX_SET_FILTER pid=17
[eDVBFrontend0] startTuneTimeout 5000
[eDVBFrontend0] setFrontend 1
[eDVBFrontend0] setting frontend
[eDVBFrontend0] fe event: status 0, inversion off, m_tuning 1
[eDVBFrontend0] fe event: status 1f, inversion off, m_tuning 2
[eDVBChannel] OURSTATE: ok
[eCableScan] SDTReady 0
[eDVBFrontend0] tune
[eDVBFrontend0] tuning to 352000 khz, sr 6875000, fec 0, modulation 5, inversion 2
[eDVBChannel] OURSTATE: tuning
[eDVBDemux] open demux /dev/dvb/adapter0/demux1
[eDVBSectionReader] DMX_SET_FILTER pid=17
[eDVBFrontend0] startTuneTimeout 5000
[eDVBFrontend0] setFrontend 1
[eDVBFrontend0] setting frontend
[eDVBFrontend0] fe event: status 0, inversion off, m_tuning 1
[eDVBFrontend0] fe event: status 1f, inversion off, m_tuning 2
[eDVBChannel] OURSTATE: ok
[eCableScan] SDTReady 0

 

 

en een gedeelte van de log van de  hd500c

 

[eDVBFrontend0] tune
[eDVBFrontend0] tuning to 304000 khz, sr 6875000, fec 0, modulation 5, inversion 2
[eDVBChannel] OURSTATE: tuning
[eDVBDemux] open demux /dev/dvb/adapter0/demux0
[eDVBSectionReader] DMX_SET_FILTER pid=16
[eDVBFrontend0] startTuneTimeout 5000
[eDVBFrontend0] setFrontend 1
[eDVBFrontend0] setting frontend
[eDVBFrontend0] fe event: status 0, inversion off, m_tuning 1
[eDVBFrontend0] fe event: status 1f, inversion off, m_tuning 2
[eDVBChannel] OURSTATE: ok
[DVBCAHandler] no more services
[eCableScan] NITReady 0
[eDVBFrontendParametersCable] Cable freq 304000, mod 5, sr 6875000, fec 0
[eDVBFrontendParametersCable] Cable freq 312000, mod 5, sr 6875000, fec 0
[eDVBFrontendParametersCable] Cable freq 320000, mod 5, sr 6875000, fec 0
[eDVBFrontendParametersCable] Cable freq 328000, mod 5, sr 6875000, fec 0
[eDVBFrontendParametersCable] Cable freq 336000, mod 5, sr 6875000, fec 0
[eDVBFrontendParametersCable] Cable freq 344000, mod 5, sr 6875000, fec 0
[eDVBFrontendParametersCable] Cable freq 352000, mod 5, sr 6875000, fec 0
[eDVBFrontendParametersCable] Cable freq 360000, mod 5, sr 6875000, fec 0
[eDVBFrontendParametersCable] Cable freq 368000, mod 5, sr 6875000, fec 0
[eDVBFrontendParametersCable] Cable freq 376000, mod 5, sr 6875000, fec 0
[eDVBFrontendParametersCable] Cable freq 384000, mod 5, sr 6875000, fec 0
[eDVBFrontendParametersCable] Cable freq 392000, mod 5, sr 6875000, fec 0
[eDVBFrontendParametersCable] Cable freq 400000, mod 5, sr 6875000, fec 0
[eDVBFrontendParametersCable] Cable freq 408000, mod 5, sr 6875000, fec 0
[eDVBFrontendParametersCable] Cable freq 416000, mod 5, sr 6875000, fec 0
[eDVBFrontendParametersCable] Cable freq 424000, mod 5, sr 6875000, fec 0
[eDVBFrontendParametersCable] Cable freq 440000, mod 5, sr 6875000, fec 0
[eDVBFrontendParametersCable] Cable freq 448000, mod 5, sr 6875000, fec 0
[eDVBFrontendParametersCable] Cable freq 456000, mod 5, sr 6875000, fec 0
[eDVBFrontendParametersCable] Cable freq 464000, mod 5, sr 6875000, fec 0
[eDVBFrontendParametersCable] Cable freq 472000, mod 5, sr 6875000, fec 0
[eDVBFrontendParametersCable] Cable freq 480000, mod 5, sr 6875000, fec 0
[eDVBFrontendParametersCable] Cable freq 488000, mod 5, sr 6875000, fec 0
[eDVBFrontendParametersCable] Cable freq 496000, mod 5, sr 6875000, fec 0
[eDVBFrontendParametersCable] Cable freq 512000, mod 5, sr 6875000, fec 0
[eDVBFrontendParametersCable] Cable freq 520000, mod 5, sr 6875000, fec 0
[eDVBFrontendParametersCable] Cable freq 528000, mod 5, sr 6875000, fec 0
[eDVBFrontendParametersCable] Cable freq 536000, mod 5, sr 6875000, fec 0
[eDVBFrontendParametersCable] Cable freq 544000, mod 5, sr 6875000, fec 0
[eDVBFrontendParametersCable] Cable freq 552000, mod 5, sr 6875000, fec 0
[eDVBFrontendParametersCable] Cable freq 560000, mod 5, sr 6875000, fec 0
[eDVBFrontendParametersCable] Cable freq 568000, mod 5, sr 6875000, fec 0
[eDVBFrontendParametersCable] Cable freq 576000, mod 5, sr 6875000, fec 0
[eDVBFrontendParametersCable] Cable freq 584000, mod 5, sr 6875000, fec 0
[eDVBFrontendParametersCable] Cable freq 592000, mod 5, sr 6875000, fec 0
[eDVBFrontendParametersCable] Cable freq 296000, mod 5, sr 6875000, fec 0
[eDVBFrontendParametersCable] Cable freq 608000, mod 5, sr 6875000, fec 0
[eDVBFrontendParametersCable] Cable freq 616000, mod 5, sr 6875000, fec 0
[eDVBFrontendParametersCable] Cable freq 624000, mod 5, sr 6875000, fec 0
[eDVBFrontendParametersCable] Cable freq 632000, mod 5, sr 6875000, fec 0
[eDVBFrontendParametersCable] Cable freq 640000, mod 5, sr 6875000, fec 0
[eDVBFrontendParametersCable] Cable freq 648000, mod 5, sr 6875000, fec 0
[eDVBFrontendParametersCable] Cable freq 272000, mod 5, sr 6875000, fec 0
[eDVBFrontendParametersCable] Cable freq 288000, mod 5, sr 6875000, fec 0
[eDVBFrontendParametersCable] Cable freq 280000, mod 5, sr 6875000, fec 0
[eDVBFrontend0] tune
[eDVBFrontend0] tuning to 304000 khz, sr 6875000, fec 0, modulation 5, inversion 2
[eDVBChannel] OURSTATE: tuning
[eDVBDemux] open demux /dev/dvb/adapter0/demux0
[eDVBSectionReader] DMX_SET_FILTER pid=17
[eDVBFrontend0] startTuneTimeout 5000
[eDVBFrontend0] setFrontend 1
[eDVBFrontend0] setting frontend
[eDVBFrontend0] fe event: status 0, inversion off, m_tuning 1
[eDVBFrontend0] fe event: status 1f, inversion off, m_tuning 2
[eDVBChannel] OURSTATE: ok
[eCableScan] SDTReady 0
[eCableScan] skip SID 1a9 on TSID 1 (which belongs to TSID 6 according to the NIT)
[eCableScan] skip SID 4ab on TSID 1 (which belongs to TSID 2d according to the NIT)
[eDVBFrontend0] tune
[eDVBFrontend0] tuning to 312000 khz, sr 6875000, fec 0, modulation 5, inversion 2
[eDVBChannel] OURSTATE: tuning
[eDVBDemux] open demux /dev/dvb/adapter0/demux0
[eDVBSectionReader] DMX_SET_FILTER pid=17
[eDVBFrontend0] startTuneTimeout 5000
[eDVBFrontend0] setFrontend 1
[eDVBFrontend0] setting frontend
[eDVBFrontend0] fe event: status 0, inversion off, m_tuning 1
[eDVBFrontend0] fe event: status 1f, inversion off, m_tuning 2
[eDVBChannel] OURSTATE: ok
[eCableScan] SDTReady 0
[eCableScan] skip SID 54 on TSID 2 (which belongs to TSID 22 according to the NIT)
[eDVBFrontend0] tune
[eDVBFrontend0] tuning to 320000 khz, sr 6875000, fec 0, modulation 5, inversion 2
[eDVBChannel] OURSTATE: tuning
[eDVBDemux] open demux /dev/dvb/adapter0/demux0
[eDVBSectionReader] DMX_SET_FILTER pid=17
[eDVBFrontend0] startTuneTimeout 5000
[eDVBFrontend0] setFrontend 1
[eDVBFrontend0] setting frontend
[eDVBFrontend0] fe event: status 0, inversion off, m_tuning 1
[eDVBFrontend0] fe event: status 1f, inversion off, m_tuning 2
[eDVBChannel] OURSTATE: ok
[eCableScan] SDTReady 0

[eDVBFrontend0] tune
[eDVBFrontend0] tuning to 320000 khz, sr 6875000, fec 0, modulation 5, inversion 2
[eDVBChannel] OURSTATE: tuning
[eDVBDemux] open demux /dev/dvb/adapter0/demux0
[eDVBSectionReader] DMX_SET_FILTER pid=17
[eDVBFrontend0] startTuneTimeout 5000
[eDVBFrontend0] setFrontend 1
[eDVBFrontend0] setting frontend
[eDVBFrontend0] fe event: status 0, inversion off, m_tuning 1
[eDVBFrontend0] fe event: status 1f, inversion off, m_tuning 2
[eDVBChannel] OURSTATE: ok
[eCableScan] SDTReady 0
[eDVBFrontend0] tune
[eDVBFrontend0] tuning to 328000 khz, sr 6875000, fec 0, modulation 5, inversion 2
[eDVBChannel] OURSTATE: tuning
[eDVBDemux] open demux /dev/dvb/adapter0/demux0
[eDVBSectionReader] DMX_SET_FILTER pid=17
[eDVBFrontend0] startTuneTimeout 5000
[eDVBFrontend0] setFrontend 1
[eDVBFrontend0] setting frontend
[eDVBFrontend0] fe event: status 0, inversion off, m_tuning 1
[eDVBFrontend0] fe event: status 1f, inversion off, m_tuning 2
[eDVBChannel] OURSTATE: ok
[eCableScan] SDTReady 0
[eDVBFrontend0] tune
[eDVBFrontend0] tuning to 336000 khz, sr 6875000, fec 0, modulation 5, inversion 2
[eDVBChannel] OURSTATE: tuning
[eDVBDemux] open demux /dev/dvb/adapter0/demux0
[eDVBSectionReader] DMX_SET_FILTER pid=17
[eDVBFrontend0] startTuneTimeout 5000
[eDVBFrontend0] setFrontend 1
[eDVBFrontend0] setting frontend
[eDVBFrontend0] fe event: status 0, inversion off, m_tuning 1
[eDVBFrontend0] fe event: status 1f, inversion off, m_tuning 2
[eDVBChannel] OURSTATE: ok
[eCableScan] SDTReady 0
[eDVBFrontend0] tune
[eDVBFrontend0] tuning to 344000 khz, sr 6875000, fec 0, modulation 5, inversion 2
[eDVBChannel] OURSTATE: tuning
[eDVBDemux] open demux /dev/dvb/adapter0/demux0
[eDVBSectionReader] DMX_SET_FILTER pid=17
[eDVBFrontend0] startTuneTimeout 5000
[eDVBFrontend0] setFrontend 1
[eDVBFrontend0] setting frontend
[eDVBFrontend0] fe event: status 0, inversion off, m_tuning 1
[eDVBFrontend0] fe event: status 1f, inversion off, m_tuning 2
[eDVBChannel] OURSTATE: ok
[eCableScan] SDTReady 0
[eDVBFrontend0] tune
[eDVBFrontend0] tuning to 352000 khz, sr 6875000, fec 0, modulation 5, inversion 2
[eDVBChannel] OURSTATE: tuning
[eDVBDemux] open demux /dev/dvb/adapter0/demux0
[eDVBSectionReader] DMX_SET_FILTER pid=17
[eDVBFrontend0] startTuneTimeout 5000
[eDVBFrontend0] setFrontend 1
[eDVBFrontend0] setting frontend
[eDVBFrontend0] fe event: status 0, inversion off, m_tuning 1
[eDVBFrontend0] fe event: status 1f, inversion off, m_tuning 2
[eDVBChannel] OURSTATE: ok
[eCableScan] SDTReady 0

Attached Files


VU+ULTIMO4K/HD11/HD530C/HD51/multibox openpli 9.0

Re: trined kabeltex sid not found in pat #111 teo1966

  • Senior Member
  • 1,116 posts

+10
Neutral

Posted 15 September 2020 - 00:15

heb hier een vu ultimo met de laatste openpli 7.3 

het gaat nog steeds niet goed met de kabelscan nu 204 zenders met trined ( met een 500c zijn het 275 zenders  )

als ik automatische zoeken en handmatig zoeken instel heb ik 379 zenders 

iemand een idee ?


VU+ULTIMO4K/HD11/HD530C/HD51/multibox openpli 9.0

Re: trined kabeltex sid not found in pat #112 teo1966

  • Senior Member
  • 1,116 posts

+10
Neutral

Posted 2 October 2020 - 22:57

maar eens wat anders geprobeerd heb de kabeltex/trined zender lijst van een HD500c gehaald met 275 zenders met dreamset

als ik een scan doe met mijn ultimo heb ik 214 zenders zet ik met dreamset de HD500c lijst in mij ultimo heb ik 275 zenders werkend

iemand een idee ?


VU+ULTIMO4K/HD11/HD530C/HD51/multibox openpli 9.0

Re: trined kabeltex sid not found in pat #113 littlesat

  • PLi® Core member
  • 57,642 posts

+709
Excellent

Posted 3 October 2020 - 07:45

Lekende marginale coax kabels en/of connectors....

WaveFrontier 28.2E | 23.5E | 19.2E | 16E | 13E | 10/9E | 7E | 5E | 1W | 4/5W | 15W

Re: trined kabeltex sid not found in pat #114 teo1966

  • Senior Member
  • 1,116 posts

+10
Neutral

Posted 3 October 2020 - 09:57

ik heb al div dingen geprobeerd nieuwe kabels een versterker een extra lange kabel

verklaar mij eens hoe het kan dat als ik een kabelscan doe heb ik 412 zenders  en als ik met dreamset een kabelscan lijst met 275 zenders meteen er in zet

zijn alle 275 zenders werkend

in mijn omgeving zijn er die dit probleem ook hebben


VU+ULTIMO4K/HD11/HD530C/HD51/multibox openpli 9.0

Re: trined kabeltex sid not found in pat #115 Tech

  • Forum Moderator
    PLi® Core member
  • 15,010 posts

+493
Excellent

Posted 3 October 2020 - 11:30

Dan is de NIT van die provider misschien niet op orde, het kan verschillende oorzaken hebben, ook kan het zijn dat de signaalsterkte op één- of meerdere complex(en) net beneden de maat is om te locken en te scannen, dan loopt de tuner er ook overheen.

De ene tuner is net iets minder gevoelig dan de ander.


Aan de rand van de afgrond is een stap voorwaarts niet altijd vooruitgang....

On the edge of the abyss, a step forward is not always progress....

Hardware: 2x Daily used Vu+ Ultimo 4K - Vu+ Duo 4K SE and a lot more.... - VisioSat BiBigsat - Jultec Unicable Multiswitch 4 positions: 19.2/23.5/28.2 East - Diseqc motorized flatdish antenna

Software : HomeBuild OpenPLi Develop and Scarthgap builds, local cards driven by OsCam

Press the Posted Image button on the buttom right of this message ;)

Have you tried our wiki yet? Many answers can be found in our OpenPLi wiki

Re: trined kabeltex sid not found in pat #116 teo1966

  • Senior Member
  • 1,116 posts

+10
Neutral

Posted 3 October 2020 - 20:44

heb een maxytec multibox en in slot1 zit openpli 7.3 heb ik 249 zenders ik boot naar

slot2 waar openatv 6.4 in zit  heb ik 275 zenders ????


VU+ULTIMO4K/HD11/HD530C/HD51/multibox openpli 9.0

Re: trined kabeltex sid not found in pat #117 WanWizard

  • PLi® Core member
  • 71,236 posts

+1,842
Excellent

Posted 3 October 2020 - 20:49

En doen die het ook allemaal? Of scant ATV ook tabellen die lokaal helemaal niet te ontvangen is?


Currently in use: VU+ Duo 4K (2xFBC S2), VU+ Solo 4K (1xFBC S2), uClan Usytm 4K Ultimate (S2+T2), Octagon SF8008 (S2+T2), Zgemma H9.2H (S2+T2)

Due to my bad health, I will not be very active at times and may be slow to respond. I will not read the forum or PM on a regular basis.

Many answers to your question can be found in our new and improved wiki.

Re: trined kabeltex sid not found in pat #118 teo1966

  • Senior Member
  • 1,116 posts

+10
Neutral

Posted 3 October 2020 - 21:01

heb net op openatv gekeken als bij openpli bv 227 zenders worden gescant dan staat bv fox 1 en fox 3 niet in de zenderlijst

deze fox 1 en fox 3 staan bij openatv er wel in en geven ontvangst


VU+ULTIMO4K/HD11/HD530C/HD51/multibox openpli 9.0

Re: trined kabeltex sid not found in pat #119 WanWizard

  • PLi® Core member
  • 71,236 posts

+1,842
Excellent

Posted 3 October 2020 - 21:55

Hoe scan je precies?


Currently in use: VU+ Duo 4K (2xFBC S2), VU+ Solo 4K (1xFBC S2), uClan Usytm 4K Ultimate (S2+T2), Octagon SF8008 (S2+T2), Zgemma H9.2H (S2+T2)

Due to my bad health, I will not be very active at times and may be slow to respond. I will not read the forum or PM on a regular basis.

Many answers to your question can be found in our new and improved wiki.

Re: trined kabeltex sid not found in pat #120 teo1966

  • Senior Member
  • 1,116 posts

+10
Neutral

Posted 3 October 2020 - 23:52

heb maar wat screenshots gemaakt dan is duidelijk hoop ik :)

 

Attached File  openpli tuner dvb-c.jpg   83.16KB   2 downloads

 

Attached File  openatv tuner dvb-c.jpg   70.81KB   2 downloads

 

Attached File  openpli kabelscan trined.jpg   80.33KB   3 downloads

 

Attached File  openatv kabelscan trined.jpg   66.42KB   3 downloads

 

Attached File  openpli kabelscan 255.jpg   37.16KB   3 downloads

 

Attached File  openatv kabelscan 275.jpg   45.73KB   3 downloads


VU+ULTIMO4K/HD11/HD530C/HD51/multibox openpli 9.0

Back to [NL] Gebruikersondersteuning

7 user(s) are reading this topic

0 members, 7 guests, 0 anonymous users

  1. Forums
  2. → PLi® Support
  3. → [NL] Gebruikersondersteuning