Jump to content


Photo

usb tuner do not work well


  • Please log in to reply
14 replies to this topic

#1 Zolyma

  • Senior Member
  • 92 posts

0
Neutral

Posted 28 January 2020 - 13:33

Hi!

vu+ uno4k se, openpli7.2.

I bought an usb tuner like this: https://www.aliexpre...1762667746.html i installed the driver from feed: rtl2832, but i only see dvb-t/t2.
there is no dvb c and i need only the dvb c.
How can i make it work right? Or this is not possible yet?



Re: usb tuner do not work well #2 WanWizard

  • Forum Moderator
    PLi® Core member
  • 50,750 posts

+926
Excellent

Posted 28 January 2020 - 13:52

Find the correct driver?


Currently in use: VU+Duo 4K (2xFBC S2), Amiko Viper T2C (T2), SAB Alpha Triple HD (S2+T2), Zgemma H9.2H ©, Zgemma H6 (fallback), VU+Zero (fallback)

Many answers to your question can be found in our new and improved wiki.

note: I do not provide support via PM !

 


Re: usb tuner do not work well #3 Zolyma

  • Senior Member
  • 92 posts

0
Neutral

Posted 28 January 2020 - 13:53

Find the correct driver?

No, where can i find?
 



Re: usb tuner do not work well #4 Zolyma

  • Senior Member
  • 92 posts

0
Neutral

Posted 28 January 2020 - 13:58

Find the correct driver?

I installed all drivers from feed, but only just t/t2 work the c not!



Re: usb tuner do not work well #5 WanWizard

  • Forum Moderator
    PLi® Core member
  • 50,750 posts

+926
Excellent

Posted 28 January 2020 - 14:01

No, where can i find?

 

No clue, you bought some non-descript chinese stick, who knows what hardware is inside it, and whether or not there is any linux support for it at all (the web page doesn't mention it).

 

Start by telling us the USB ID of the device.


Currently in use: VU+Duo 4K (2xFBC S2), Amiko Viper T2C (T2), SAB Alpha Triple HD (S2+T2), Zgemma H9.2H ©, Zgemma H6 (fallback), VU+Zero (fallback)

Many answers to your question can be found in our new and improved wiki.

note: I do not provide support via PM !

 


Re: usb tuner do not work well #6 Zolyma

  • Senior Member
  • 92 posts

0
Neutral

Posted 28 January 2020 - 14:05

 

No, where can i find?

 

No clue, you bought some non-descript chinese stick, who knows what hardware is inside it, and whether or not there is any linux support for it at all (the web page doesn't mention it).

 

Start by telling us the USB ID of the device.

 

Where can i find, watch it?



Re: usb tuner do not work well #7 Zolyma

  • Senior Member
  • 92 posts

0
Neutral

Posted 28 January 2020 - 14:12

 

No, where can i find?

 

No clue, you bought some non-descript chinese stick, who knows what hardware is inside it, and whether or not there is any linux support for it at all (the web page doesn't mention it).

 

Start by telling us the USB ID of the device.

 

maybe:

https://discourse.os...ebay/20164.html
 


Edited by Zolyma, 28 January 2020 - 14:14.


Re: usb tuner do not work well #8 Zolyma

  • Senior Member
  • 92 posts

0
Neutral

Posted 28 January 2020 - 14:14

https://mysku.ru/blog/ebay/20164.html



Re: usb tuner do not work well #9 WanWizard

  • Forum Moderator
    PLi® Core member
  • 50,750 posts

+926
Excellent

Posted 28 January 2020 - 14:30

Where can i find, watch it?

 

Login to the box, type the command "lsusb", and post the result here.
 


Currently in use: VU+Duo 4K (2xFBC S2), Amiko Viper T2C (T2), SAB Alpha Triple HD (S2+T2), Zgemma H9.2H ©, Zgemma H6 (fallback), VU+Zero (fallback)

Many answers to your question can be found in our new and improved wiki.

note: I do not provide support via PM !

 


Re: usb tuner do not work well #10 Zolyma

  • Senior Member
  • 92 posts

0
Neutral

Posted 28 January 2020 - 14:32

Bus 002 Device 002: ID 05e3:0626
Bus 003 Device 002: ID 05e3:0610
Bus 004 Device 002: ID 15f4:0131
Bus 001 Device 001: ID 1d6b:0002
Bus 002 Device 001: ID 1d6b:0003
Bus 003 Device 001: ID 1d6b:0002
Bus 004 Device 001: ID 1d6b:0002
Bus 005 Device 001: ID 1d6b:0001
Bus 006 Device 001: ID 1d6b:0001
Bus 003 Device 003: ID 0403:6001
Bus 003 Device 004: ID 076b:3021
Bus 003 Device 005: ID 090c:1000

usb1: tuner
usb2: hub-pendrive,pcscreader,phoenix reader.


Edited by Zolyma, 28 January 2020 - 14:33.


Re: usb tuner do not work well #11 WanWizard

  • Forum Moderator
    PLi® Core member
  • 50,750 posts

+926
Excellent

Posted 28 January 2020 - 16:00

15f4:0131 looks like an Astrometa.

 

From what I understand, you need both:

opkg install enigma2-plugin-drivers-dvb-usb-rtl2832
opkg install kernel-module-mn88473

you need the panasonic firmware:

cd /lib/firmware
wget http://palosaari.fi/linux/v4l-dvb/firmware/MN88473/01/latest/dvb-demod-mn88473-01.fw

after which you have to reboot.

 

And chances are it will still not work, Astrometa kernel support was very flaky until recently, and VU+ boxes run on a pretty old kernel version.

 

There are some other topics on this forum about Astrometa, perhaps those may provide some pointers...


Currently in use: VU+Duo 4K (2xFBC S2), Amiko Viper T2C (T2), SAB Alpha Triple HD (S2+T2), Zgemma H9.2H ©, Zgemma H6 (fallback), VU+Zero (fallback)

Many answers to your question can be found in our new and improved wiki.

note: I do not provide support via PM !

 


Re: usb tuner do not work well #12 Zolyma

  • Senior Member
  • 92 posts

0
Neutral

Posted 28 January 2020 - 16:14

root@vuuno4kse:~# opkg install kernel-module-mn88473
Couldn't find anything to satisfy 'kernel-module-mn88473'.
No packages installed or removed.
root@vuuno4kse:~#
root@vuuno4kse:~# cd /lib/firmware
root@vuuno4kse:/lib/firmware# wget http://palosaari.fi/...dvb/firmware/MN
88473/01/latest/dvb-demod-mn88473-01.fw
Connecting to palosaari.fi (91.232.156.81:80)
wget: can't open 'dvb-demod-mn88473-01.fw': File exists
root@vuuno4kse:/lib/firmware#


 


Edited by Zolyma, 28 January 2020 - 16:15.


Re: usb tuner do not work well #13 WanWizard

  • Forum Moderator
    PLi® Core member
  • 50,750 posts

+926
Excellent

Posted 28 January 2020 - 17:48

Thought so. Old kernel.


Currently in use: VU+Duo 4K (2xFBC S2), Amiko Viper T2C (T2), SAB Alpha Triple HD (S2+T2), Zgemma H9.2H ©, Zgemma H6 (fallback), VU+Zero (fallback)

Many answers to your question can be found in our new and improved wiki.

note: I do not provide support via PM !

 


Re: usb tuner do not work well #14 Zolyma

  • Senior Member
  • 92 posts

0
Neutral

Posted 28 January 2020 - 18:18

Do you know cheep usb c tuner which will work with my box?

Re: usb tuner do not work well #15 WanWizard

  • Forum Moderator
    PLi® Core member
  • 50,750 posts

+926
Excellent

Posted 28 January 2020 - 18:42

No, because of these issues we tend to avoid USB devices like the plague...


Currently in use: VU+Duo 4K (2xFBC S2), Amiko Viper T2C (T2), SAB Alpha Triple HD (S2+T2), Zgemma H9.2H ©, Zgemma H6 (fallback), VU+Zero (fallback)

Many answers to your question can be found in our new and improved wiki.

note: I do not provide support via PM !

 





0 user(s) are reading this topic

0 members, 0 guests, 0 anonymous users