Jump to content


Photo

Gigablue UE 4K Tuner Problem


  • Please log in to reply
86 replies to this topic

Re: Gigablue UE 4K Tuner Problem #21 Pike_Bishop

  • Senior Member
  • 1,120 posts

+72
Good

Posted 8 March 2020 - 20:42

Hier noch der betreffende Post dazu von mir damals;

https://forums.openp...dpost&p=1109364

geht bis zu Post #16 bzw. noch etwas weiter

 

 

Grüsse

Pike


Edited by Pike_Bishop, 8 March 2020 - 20:46.

Receiver: VU Ultimo 4K, Octagon SF8008 4K, Gigablue Quad 4K

Image: OpenPLI-8.3


Re: Gigablue UE 4K Tuner Problem #22 Funnyland

  • Senior Member
  • 33 posts

0
Neutral

Posted 8 March 2020 - 20:44

Ähhhh ich poste mal die settings das klappt nach 1,5 wochen noch nicht :(

Attached Files



Re: Gigablue UE 4K Tuner Problem #23 rantanplan

  • PLi® Contributor
  • 1,760 posts

+81
Good

Posted 8 March 2020 - 20:59

Das sieht tatsächlich in der History des nimmanager lustig nach ärgerlichen wiederholenden Problem aus.

Es fällt keinem auf, da fast alle ihre alten Einstellungen wiederherstellen.

Das heißt die Settings werden wieder zurück geführt.

Ich würde vermuten das der Fehler seit dem 24.09.2019 wieder drin ist und vorher nur kurz weg war.

 

Aber wird schon;-)



Re: Gigablue UE 4K Tuner Problem #24 Pike_Bishop

  • Senior Member
  • 1,120 posts

+72
Good

Posted 8 March 2020 - 21:01

ok versuch mal die;

 

aber du musst erst mittels telnet und Befehl init 4 das e2 stoppen, dann meine settings per FTP nach /etc/enigma2 kopieren und dann das e2 mit Befehl init 3 wieder starten.

 

Aber heb dir sicherheisthalber die Originale settings noch auf man weiss ja nie.

 

Bin nicht sicher obs so klappt, falls nicht muss man die nochmal ändern kann sein das alle Tuner mit Tuner A verbunden gehören und nicht wie bei der VU Ultimo 4k

Tuner B mit A, Tuner C mit B, usw...

 

Und zum Schluss starte trotzdem die Box komplett neu.

 

 

Grüsse

Pike

Attached Files


Edited by Pike_Bishop, 8 March 2020 - 21:02.

Receiver: VU Ultimo 4K, Octagon SF8008 4K, Gigablue Quad 4K

Image: OpenPLI-8.3


Re: Gigablue UE 4K Tuner Problem #25 Funnyland

  • Senior Member
  • 33 posts

0
Neutral

Posted 8 March 2020 - 21:09

Also das zurück Kopieren habe ich verstanden aber

 

"aber du musst erst mittels telnet und Befehl init 4 das e2 stoppen, dann meine settings per FTP nach /etc/enigma2 kopieren und dann das e2 mit Befehl init 3 wieder starten." :huh: :huh: :huh:?

 

Telnet ?

Befehl ?

 

Sorry



Re: Gigablue UE 4K Tuner Problem #26 rantanplan

  • PLi® Contributor
  • 1,760 posts

+81
Good

Posted 8 March 2020 - 21:09

Laut bisheriger Meldung ist offiziell bei Gigablue alle mit A.

Es spielt aber keine Rolle, klappt auch wie bei deiner VU+ der Reihe nach.

 

Ich hätte es jetzt so versucht...

config.audio.volume=80
config.av.videomode.DVI=2160p
config.av.videorate.2160p=auto
config.hdmicec.bookmarks=['/hdd/']
config.misc.do_overscanwizard=false
config.misc.firstrun=false
config.misc.initialchannelselection=false
config.misc.languageselected=false
config.misc.startCounter=4
config.misc.videowizardenabled=false
config.movielist.videodirs=['/media/hdd/movie/']
config.Nims.0.advanced.lnb.1.lof=unicable
config.Nims.0.advanced.lnb.1.scrList=1
config.Nims.0.advanced.lnb.1.unicableManufacturer=Telestar
config.Nims.0.advanced.lnb.1.unicableProduct=Skywire HC LNB
config.Nims.0.advanced.sat.192.lnb=1
config.Nims.0.configMode=advanced
config.Nims.1.advanced.lnb.1.lof=unicable
config.Nims.1.advanced.lnb.1.scrList=2
config.Nims.1.advanced.lnb.1.unicableManufacturer=Telestar
config.Nims.1.advanced.lnb.1.unicableProduct=Skywire HC LNB
config.Nims.1.advanced.sat.192.lnb=1
config.Nims.1.advanced.unicableconnected=true
config.Nims.1.configMode=advanced
config.Nims.2.advanced.lnb.1.lof=unicable
config.Nims.2.advanced.lnb.1.scrList=3
config.Nims.2.advanced.lnb.1.unicableManufacturer=Telestar
config.Nims.2.advanced.lnb.1.unicableProduct=Skywire HC LNB
config.Nims.2.advanced.sat.192.lnb=1
config.Nims.2.advanced.unicableconnected=true
config.Nims.2.configMode=advanced
config.Nims.3.advanced.lnb.1.lof=unicable
config.Nims.3.advanced.lnb.1.scrList=4
config.Nims.3.advanced.lnb.1.unicableManufacturer=Telestar
config.Nims.3.advanced.lnb.1.unicableProduct=Skywire HC LNB
config.Nims.3.advanced.sat.192.lnb=1
config.Nims.3.advanced.unicableconnected=true
config.Nims.3.configMode=advanced
config.OpenWebif.allow_upload_ipk=true
config.osd.language=de_DE
config.plugins.bluetoothsetup.gbrcuSkipFwVer=0
config.plugins.configurationbackup.backupdirs=['/etc/default_gw', '/etc/enigma2/', '/etc/hostname', '/etc/network/interfaces', '/etc/resolv.conf', '/etc/wpa_supplicant.ath0.conf', '/etc/wpa_supplicant.conf', '/etc/wpa_supplicant.wlan0.conf']
config.radio.lastroot=1:7:1:0:0:0:0:0:0:0:FROM BOUQUET "bouquets.radio" ORDER BY bouquet;1:7:1:0:0:0:0:0:0:0:FROM BOUQUET "bouquets.radio" ORDER BY bouquet;
config.recording.keep_timers=7
config.recording.margin_after=5
config.recording.margin_before=3
config.recording.offline_decode_delay=1000
config.seek.selfdefined_13=15
config.seek.selfdefined_46=60
config.seek.selfdefined_79=300
config.skin.primary_skin=Army_MoodBlue_mod/skin.xml
config.tv.lastroot=1:7:1:0:0:0:0:0:0:0:FROM BOUQUET "bouquets.tv" ORDER BY bouquet;1:7:1:0:0:0:0:0:0:0:FROM BOUQUET "userbouquet.dbe02.tv" ORDER BY bouquet;
config.tv.lastservice=1:0:19:8B:2:85:C00000:0:0:0:
config.unicable.unicableManufacturer=Telestar
config.unicable.unicableProduct=Skywire HC LNB
config.usage.allowed_timeshift_paths=['/media/hdd/']
config.usage.menu_sort_weight={'mainmenu': {'submenu': {}}}
config.usage.movielist_trashcan_days=8
config.usage.movielist_trashcan_reserve=40
config.usage.setup_level=expert

 


Edited by rantanplan, 8 March 2020 - 21:13.


Re: Gigablue UE 4K Tuner Problem #27 rantanplan

  • PLi® Contributor
  • 1,760 posts

+81
Good

Posted 8 March 2020 - 21:36

Hat geklappt?

 

Putty ist der klassische Telnet client.

Winscp geht auch...

 

Wenn du die Box, also besser das e2 nicht stoppst, dann wird die Datei nicht überschrieben.

Daher muss die Box mit dem Befehl via Telnet gestoppt werden.

FTP und Telnet funktionieren dann weiterhin.

Nach dem du dann überschrieben hast die Box entweder komplett neu starten oder nur e2 neu starten.

Dann bleibt auch das geänderte fix.

 

Telnet Befehle

 

init 4 ->stoppt e2

init 3 ->startet e2 neu

init 6 ->startet den Receiver komplett neu

 

Grüße



Re: Gigablue UE 4K Tuner Problem #28 Funnyland

  • Senior Member
  • 33 posts

0
Neutral

Posted 8 March 2020 - 21:44

Okay das habe ich benötigt muss es aber morgen testen um 4 ist die nacht zu ende



Re: Gigablue UE 4K Tuner Problem #29 Abu Baniaz

  • PLi® Contributor
  • 2,414 posts

+61
Good

Posted 9 March 2020 - 06:34

What is the model number of the LNB you are using? How many ports of the LNB have you used a signal wire to connect to the receiver? One of them is Unicable and two are legacy (universal). Are you sure you have used the Unicable one? Sorry to ask, just need to confirm.


Edited by Abu Baniaz, 9 March 2020 - 06:41.


Re: Gigablue UE 4K Tuner Problem #30 Abu Baniaz

  • PLi® Contributor
  • 2,414 posts

+61
Good

Posted 9 March 2020 - 07:11

Skywire have different Unicable LNBs, we will have to update XML file to list the ones with 24 SCR. We only have the one listed that has 4 SCR. I think it is not the one you have, I will wait for the model number of your device.

Sent from my Moto G (5S) using Forum Fiend v1.3.3.

Re: Gigablue UE 4K Tuner Problem #31 littlesat

  • PLi® Core member
  • 56,123 posts

+685
Excellent

Posted 9 March 2020 - 07:51

Or config it manually...(and then post config here so I can add it)

WaveFrontier 28.2E | 23.5E | 19.2E | 16E | 13E | 10/9E | 7E | 5E | 1W | 4/5W | 15W


Re: Gigablue UE 4K Tuner Problem #32 Funnyland

  • Senior Member
  • 33 posts

0
Neutral

Posted 9 March 2020 - 08:27

Leider verstehe ich die Letzten 3 Post absolut nicht



Re: Gigablue UE 4K Tuner Problem #33 Funnyland

  • Senior Member
  • 33 posts

0
Neutral

Posted 9 March 2020 - 12:00

So wollte das nun mal über Terminal versuchen nur ist er gar nicht mehr da wie bekomme ich das hin das es mir angezeigt wird im webif ???

Attached Files



Re: Gigablue UE 4K Tuner Problem #34 rantanplan

  • PLi® Contributor
  • 1,760 posts

+81
Good

Posted 9 March 2020 - 12:35

Du hast jetzt welche Liste eingespielt?

 

Terminal brauchst du um e2 zu stoppen und wieder starten wie oben beschrieben.

 

kopiert wird ja mittels ftp.

Wenn es nicht geklappt hat kommt es zu Fehlern und du spielst deine gesicherte setting wieder zurück.

Vorher kannst aber auch einfach die andere Variante testen.

Pike hat es abgeleitet von seine VU+ Box, gut möglich das die Settings etwas anders aussehen.

Ich hatte daher dir die andere Variante auch gepostet.

 

Grüße

 

@Abu Baniaz

@ littlesat

 

The problem is not the LNB itself, the system is also aware of this.
The problem is the handling of the FBC in the Nim manager.
I can only guess, but for me the commit looks

https://github.com/O...519d0ab55099cb4

but I'm not sure
as if no further setting would be possible after the 2 FBC tuners.
However, the general assignment of the FBC tuner to the port of the activated tuner is missing.
connect to
is not activated
Therefore the tuners c ... cannot be activated.
@PikeBishop had mentioned that before.



Re: Gigablue UE 4K Tuner Problem #35 Funnyland

  • Senior Member
  • 33 posts

0
Neutral

Posted 9 March 2020 - 13:07

Nur ist der terminal auf der Linken seite nirgends ersichtlich oder habe ich was an den augen siehe Post 33 wollte dann aus Post 24 einspielen



Re: Gigablue UE 4K Tuner Problem #36 rantanplan

  • PLi® Contributor
  • 1,760 posts

+81
Good

Posted 9 March 2020 - 13:12

lade dir putty auf deinen Rechner und mach es damit.

Ist kein Hexenwerk ;)



Re: Gigablue UE 4K Tuner Problem #37 rantanplan

  • PLi® Contributor
  • 1,760 posts

+81
Good

Posted 9 March 2020 - 13:18

Wenn du es mit dem Terminal vom Webif machst, dann ist dies beim Stopp des e2 ja jedesmal auch weg.

Dann müsstest du die Box quasi "hart" ausschalten, nachdem du kopiert hast.

Also Schalter aus und wieder an.



Re: Gigablue UE 4K Tuner Problem #38 Funnyland

  • Senior Member
  • 33 posts

0
Neutral

Posted 9 March 2020 - 14:46

Wenn du es mit dem Terminal vom Webif machst, dann ist dies beim Stopp des e2 ja jedesmal auch weg.

Dann müsstest du die Box quasi "hart" ausschalten, nachdem du kopiert hast.

Also Schalter aus und wieder an.

Selbst wenn ich die Box aus und dann wieder einschalte ist der Terminal nie da. Der Ist quasi nie ersichtlich der Fehlt in der oberfläche.



Re: Gigablue UE 4K Tuner Problem #39 Abu Baniaz

  • PLi® Contributor
  • 2,414 posts

+61
Good

Posted 9 March 2020 - 15:24

I flashed 7.2, there was no problems with using connected. I was able to set 4 demodulators with unique SCR. Three of them I set as connected to A.

First Install Wizard only allows you to set the demodulators with physical connection ports, the other 6 are set as FBC automatic. You have to set them up later. Please go to tuner configuration and try again. If it does not allow you to, do following please:

"init 4" command using putty/terminal
wait 10 seconds
edit the file called "settings" in /etc/enigma2 and delete all lines that say NIM
Transfer file back to receiver
"init 3" command using Putty/terminal to restart

Or flash image again and do not restore afterwards.

Sent from my Moto G (5S) using Forum Fiend v1.3.3.

Re: Gigablue UE 4K Tuner Problem #40 Funnyland

  • Senior Member
  • 33 posts

0
Neutral

Posted 9 March 2020 - 15:44

I flashed 7.2, there was no problems with using connected. I was able to set 4 demodulators with unique SCR. Three of them I set as connected to A.

First Install Wizard only allows you to set the demodulators with physical connection ports, the other 6 are set as FBC automatic. You have to set them up later. Please go to tuner configuration and try again. If it does not allow you to, do following please:

"init 4" command using putty/terminal
wait 10 seconds
edit the file called "settings" in /etc/enigma2 and delete all lines that say NIM
Transfer file back to receiver
"init 3" command using Putty/terminal to restart

Or flash image again and do not restore afterwards.

Sent from my Moto G (5S) using Forum Fiend v1.3.3.

Even a complete reinstallation didn't work




1 user(s) are reading this topic

0 members, 1 guests, 0 anonymous users