14 replies to this topic

[hemertje]

A new Enigma2 PLi® Dreambox release is available for download.

The Original Enigma2 PLi® Jade Final suite contains the following images:

* PLi®-Jade-DM7025
* PLi®-Jade-DM800


See below for fixes & features since the initial PLi® Jade RC release

Warning:
- For the dm7025 we don't support an online software update from Jade RC to Jade Final
- For the dm800 the online software update should work. But note that in order to get the #62 bootloader, you have to flash the nfi
- For editing a Enigma2 (HDTV) channellist, you will need a channeleditor which supports fully the service4 type lamedb file, like for example: DreamBoxEdit 3.0 or Dreamset v2.20



Highlights:
- Services4 for lamedb support
* (PLi Jade Final supports HDTV channels 100%!)
- AC3 fixes for BEV/DISH NETWORK, by Updatelee
- North America scan fix by Updatelee
- Bootloader #62 for DM800
* (fixes crashes on HD channels)
- TuxTXT-32bpp: added support for HD framebuffer resolutions (HD skins)
- Satellites.xml split in Ka, Ku, C, S, L band


Enigma2:
- CVS Repository September 30th 2008
- PLi® Repository September 29th 2008
- Services4 for lamedb support
* (PLi Jade Final supports HDTV channels 100%!)
* For editing a Enigma2 (HDTV) channellist, you will need a channeleditor which supports fully the service4 type lamedb file, like for example: DreamBoxEdit 3.0 or Dreamset v2.20
- Don't allow markers in the servicelist to be selected
* (In order to provide some way of deleting markers, we do allow them to be selected while in bouquet editmode)
- Wrapping fixed in listboxes, when the top item is a non-selectable item (e.g. marker in a servicelist)
- Event progress bars in the servicelist
- Servicelist redesigned
- AC3 fixes for BEV/DISH NETWORK, by Updatelee
- North America scan fix by Updatelee
- Only show serviceinfo for 'playable' items in the serviceselector
* (Fixes 'no info' in the bouquet list)
- Tuxcom / Tuxterm: support for HD framebuffer resolutions (HD skins)
- Tuxterm: Support for DM800
- TuxTXT-32bpp: support for HD framebuffer resolutions (HD skins)
- Freetype update, several ttf rendering improvements


Drivers:
- 20080826 drivers for DM7025
- 20080821 drivers for DM800
- Bootloader #62 for DM800
* (Fixes crashes on HDTV channels)


Plugins:
- Enigma2 plugins 20080926 (including autotimer fix and DVD-Player fixes)
- CCcam 2.0.9 SoftCam
- RQCamd 0.90 Softcam
- Picons updated to 20080930
- Latest Henksat settings


Skins:
- Converted to latest enigma2
- Skin parsing: assume 'title' and 'text' are utf-8


Mounts:
- Additional NET mountpoints added (/media/net1 - net3)


Languages:
- Several translations updated


Support:
- Online update support (IPKG feed)
- Global satellites.xml updated September 29th 2008 (DVB-S: FEC = Automatic; DVB-S2: FEC = Normal)
- Satellite.xml split in Ka, Ku, C, S, L band


See our PLi® Wiki...


Further:
- Thanks to Updatelee for his N.A. AC3 and scanning fixes


Many low level changes fixes and other updates...

Detailed info, Wiki, FAQ's, HowTo's, TechNotes and information about this and the previous PLi® releases can be found on the PLi® Website:

http://www.pli-images.org

[gezz]

Downloaded. Installed. And fully up and running. Like the event progress bars. Thanks PLi

[afzalsher]

Because of some bug in the CVS image, when the Tuner B is selected as second cable of a motorized dish, the Jade final does not work while the pre-release worked fantastic.

[pieterg]

Because of some bug in the CVS image, when the Tuner B is selected as second cable of a motorized dish, the Jade final does not work while the pre-release worked fantastic.

On tuesday dmm claimed to have made a fix for this:

Modified Files:
        sec.cpp
Log Message:
fix non working "2nd lnb from motorized dish"

we decided to delay the release and get this fix in (together with a few other last minute fixes).

So are you sure it is not working?
In that case the fix did not do what it claimed.

[afzalsher]

I am absolutely sure that the fix is not working. Have reinstalled many times. Not even Tuner B Equal to A is working satisfactorliy. I tried to copy the NimManager and Satconfig files form the older Jade to the new one, that did not work either as the DB 7025 continuously reboots then. I will be very thankful if you could kindly finda solution with the older NimManager Files and the Final Jade Image.

Regards,
Afzal

[arie69]

Hi,

If you use a usals rotor like me, then we have the same problem.
My solusion is go in the menu too settings where you can also find the timers voor harddisk recordings, at the bottom the standard tuner should say automatic, change this in Tuner A and everything should work, it worked for me.
Good luck and hope to here if it worked for you.

Arjan van Asten (Neerpelt Belgium)

[afzalsher]

Dear Arjan,

Your trick worked worked perfect.Thanks a lot. A little more elaborate expalanation is:

Menu - Setup - System - Customized - Choose Expert Setup mode in the first line - go to the bottom of the menu (3rd page) and change Standard Tuner from Automativ to Tuner A.

And good luck
Afzal

[pieterg]

online update available:

-enigma2-plugins updated to 20081028
-recording 'no PAT' / 'no PMT' fix
-rss reader: support more characters
-ppanels: fixed 'condition' attribute handling
-fixed missing gst-plugin-fluendo-mpegdemux dependency for 800
-added gst-plugin-matroska (mkv support)
-fixed crash in empty EventView context menu
-dvbburn utils in the feed for 7025 and 800
-bootloader #67 for dm800
-NFT timezone added
-rqcamd 0.94

With the dm7025 you have to be prepared for running out of flash space, when performing an online update.
Always backup your settings before you start an online update. And if it fails, download the latest nfi, and reflash.
You'll find todays latest nfi in our downloads, so you can start with a fresh image, with maximum free flash space.

[golfdiesel]

Anyone here in the English forum who has a solution for the widescreen switching problem in the latest Jade image?
It seems that WSS doesn't work at all, actually none of the display settings have any effect when I change them.
I have the latest (10-nov) Oozoon lean image in flash with Barry Allen on a CF card with the latest Jade image on it.
Widescreen switching works perfectly with:
Ronaldd, Gemini, Oozoon, LT Fifth

[pieterg]

Either a BA thing (have you tried without BA?) or an issue with the latest drivers.
Which driverversion do those other images have?
(ipkg info dreambox-dvb-modules)

[golfdiesel]

Either a BA thing (have you tried without BA?) or an issue with the latest drivers.
Which driverversion do those other images have?
(ipkg info dreambox-dvb-modules)

Oozoon has:
root@dm7025:~# ipkg info dreambox-dvb-modules
Package: dreambox-dvb-modules
Version: 2.6.12.6-20081025-gcc4.1-r0
Depends: kernel (2.6.12.6), libstdc++6 (>= 4.1.1), libgcc1 (>= 4.1.1), libc6 (>= 2.3.5+cvs20051107)
Status: install user installed
Architecture: dm7025

[pieterg]

And we have 20081001, because 1025 has some issues (bootlogo and rc related)
But could you check whether your av problems go away with this version?

[golfdiesel]

And we have 20081001, because 1025 has some issues (bootlogo and rc related)
But could you check whether your av problems go away with this version?

I checked it with 1025 and switching works perfectly. The only thing is that the screen position was way off after installation and a reboot. I had to use the plugin you supplied in the image to correct it.
I haven't noticed any problems with 1025 in regards to the bootlogo and rc. Honestly I couldn't care less about the bootlogo but rc problems can be anoying I can tell out of my own experience after owning a Relook 400s .
So the swithing is driver related.

[pieterg]

ok, I think we should switch to 1025 in that case, it sounds like you have more problems with 1001 than 1025 anyways.

[golfdiesel]

That would be nice.
The screen position pluging is rather nice though. In my current setup my DVD player is connected to my TV using a HDMI cable and the 7025 through a scart cable.
The TV has some overscan problems (it is a Philips so why should it be working properly the first time.... ) which can be corrected but those settings are global for all inputs (Scart, HDMU, Component, SVideo). But all inputs behave a little differently. Now I can set the image to be correct using the HDMI input and then switch to the Dreambox and set the image correctly again so now both inputs behave nicely