Jump to content


Photo

How to use setup the Cccam to Oscam


  • Please log in to reply
18 replies to this topic

#1 majid7

  • Member
  • 12 posts

0
Neutral

Posted 28 March 2020 - 17:45

Hi guys

I using Cccam in my device VU+Solo2

but i heard Oscam is better.

Can you guid me to convert Cccam to Oscam and send by "DCC" to my device?

Now in my Plugin /downloads/softcams  oscam-emu(git1825+c46c72d-0.0 & Oscam (git10492+9de7d61-r0.0) available for install

my open pli 7.2

Please explain completely  A to Z

thanks So Much



Re: How to use setup the Cccam to Oscam #2 sajjad9626

  • Member
  • 8 posts

0
Neutral

Posted 29 March 2020 - 01:08

if you already have installed OScam from 'Now in my Plugin /downloads/softcams' then you just need to add your c-line/mg line into your oscam directory 

 

this is how you do it 

 

1. Connect Dcc 

2. FTP > etc /  tuxbox / config / 

in config you will see many files but you only need 2 of them

oscam.server

oscam.conf

 

edit oscam.server and put these lines including your own cline.

 

[reader]
label                         = CCcam1
protocol                      = cccam
device                        = ABC123.COM,12345  (ADD YOUR SERVER LINK, & PORT
user                          = 123456      (USER NAME CLINE)
password                      = 123456   (PASSWORD FROM CLINE
inactivitytimeout             = 5
group                         = 2
disablecrccws                 = 1
cccversion                    = 2.2.1
cccwantemu                    = 1


Re: How to use setup the Cccam to Oscam #3 majid7

  • Member
  • 12 posts

0
Neutral

Posted 29 March 2020 - 05:48

 

if you already have installed OScam from 'Now in my Plugin /downloads/softcams' then you just need to add your c-line/mg line into your oscam directory 

 

this is how you do it 

 

1. Connect Dcc 

2. FTP > etc /  tuxbox / config / 

in config you will see many files but you only need 2 of them

oscam.server

oscam.conf

 

edit oscam.server and put these lines including your own cline.

 

[reader]
label                         = CCcam1
protocol                      = cccam
device                        = ABC123.COM,12345  (ADD YOUR SERVER LINK, & PORT
user                          = 123456      (USER NAME CLINE)
password                      = 123456   (PASSWORD FROM CLINE
inactivitytimeout             = 5
group                         = 2
disablecrccws                 = 1
cccversion                    = 2.2.1
cccwantemu                    = 1

 

Thanks it is done but  i used   cccam2oscam ver 1.2 .After convert I saved 2 format file.oscam.server &oscam.user and transfer to etc /  tuxbox / config/oscam-emu and replace with old files .so its working correctly.

My oscam emu is "git1825+c46c72d-r0.0"

Thanks and i hope helpful for guys


Edited by majid7, 29 March 2020 - 05:52.


Re: How to use setup the Cccam to Oscam #4 s3n0

  • Senior Member
  • 640 posts

+62
Good

Posted 29 March 2020 - 11:09

The C-Line format is:

C: host port user pass

 

Example of C-Line:

C: server.myip.com 12000 foobar a1b2c3

 

C-Line translated into the oscam.server file:

[reader]

label              = remote_card_reader

protocol         = cccam

cccversion     = 2.1.3

device           = server.myip.com,12000

user              = foobar

password      = a1b2c3

 

Of course you may need more settings in Oscam - such as adding a CAID to "oscam.server" file (sometimes it helps - depending on the Oscam server setting).

Then it is good to also define the user's dvbapi to the "oscam.user" + "oscam.conf" file if you also use a internal satellite card ... and then you have to set other details.

 

More info about the "oscam.server" file: http://www.streamboa...ig/oscam.server

More info about all oscam config files: http://www.streamboa...v/wiki/OSCam/en


Edited by s3n0, 29 March 2020 - 11:12.


Re: How to use setup the Cccam to Oscam #5 s3n0

  • Senior Member
  • 640 posts

+62
Good

Posted 29 March 2020 - 11:20


Thanks it is done but  i used   cccam2oscam ver 1.2 .After convert I saved 2 format file.oscam.server & oscam.user and transfer to /etc/tuxbox/config/oscam-emu and replace with old files .so its working correctly.

My oscam emu is "git1825+c46c72d-r0.0"

Thanks and i hope helpful for guys

 

 

Show what you have in your "oscam.conf" and "oscam.user" files.

Write whether you also use an internal reader or CI+ slot in the set-top-box (to properly match the Oscam settings).

Connect to OscamWebif -> LiveLog (http://set-top-box_IP_address:8888) and show us what errors your LOG shows.

Do not forget to erase (overwrite all with the "X" character) any IP addresses and passwords !


Edited by s3n0, 29 March 2020 - 11:23.


Re: How to use setup the Cccam to Oscam #6 jonnh

  • Member
  • 7 posts

0
Neutral

Posted 28 July 2020 - 23:51

what can be the problem if everything just stops working with oscam? No problem with server. I have heard restart cam will make it work, sometimes you have to restart it several times. But its not working. From the beginning all works. But without making any changes in settings nothing works.

Maybe I have made some wrong settings in oscam.server file? or what could be wrong? Anyone else got the issue with oscam



Re: How to use setup the Cccam to Oscam #7 mimisiku

  • Senior Member
  • 5,458 posts

+114
Excellent

Posted 29 July 2020 - 18:23

This is allowed here?!?
Met één been in het graf..... Helaas

Re: How to use setup the Cccam to Oscam #8 WanWizard

  • PLi® Core member
  • 68,309 posts

+1,719
Excellent

Posted 29 July 2020 - 20:01

We  have no problem with information on how to convert cccam config to oscam, as such.

 

We do have a problem with the use of external servers (which are illegal), and discussing it.


Currently in use: VU+ Duo 4K (2xFBC S2), VU+ Solo 4K (1xFBC S2), uClan Usytm 4K Pro (S2+T2), Octagon SF8008 (S2+T2), Zgemma H9.2H (S2+T2)

Due to my bad health, I will not be very active at times and may be slow to respond. I will not read the forum or PM on a regular basis.

Many answers to your question can be found in our new and improved wiki.


Re: How to use setup the Cccam to Oscam #9 ims

  • PLi® Core member
  • 13,608 posts

+211
Excellent

Posted 29 July 2020 - 20:46


 

This is allowed here?!?

Tomtom employee? :D


Kdo nic nedělá, nic nezkazí!

Re: How to use setup the Cccam to Oscam #10 mimisiku

  • Senior Member
  • 5,458 posts

+114
Excellent

Posted 30 July 2020 - 14:52

We  have no problem with information on how to convert cccam config to oscam, as such.
 
We do have a problem with the use of external servers (which are illegal), and discussing it.

And you don't think this is NOT an external server?
Met één been in het graf..... Helaas

Re: How to use setup the Cccam to Oscam #11 WanWizard

  • PLi® Core member
  • 68,309 posts

+1,719
Excellent

Posted 30 July 2020 - 17:18

Quite possible, but nothing in the TS's posts point to that.

 

It's the anwers that refer to servers by DNS, so we're keeping a close eye on this thread...


Currently in use: VU+ Duo 4K (2xFBC S2), VU+ Solo 4K (1xFBC S2), uClan Usytm 4K Pro (S2+T2), Octagon SF8008 (S2+T2), Zgemma H9.2H (S2+T2)

Due to my bad health, I will not be very active at times and may be slow to respond. I will not read the forum or PM on a regular basis.

Many answers to your question can be found in our new and improved wiki.


Re: How to use setup the Cccam to Oscam #12 s3n0

  • Senior Member
  • 640 posts

+62
Good

Posted 31 July 2020 - 22:21


 

what can be the problem if everything just stops working with oscam? No problem with server. I have heard restart cam will make it work, sometimes you have to restart it several times. But its not working. From the beginning all works. But without making any changes in settings nothing works.

Maybe I have made some wrong settings in oscam.server file? or what could be wrong? Anyone else got the issue with oscam

 

What exactly is meant by this - "everything just stops working with oscam" ? Oscam stop working ? Why ? Under what circumstances ? What exactly stops (oscam service, decoding ECMs, freezes Oscam, do you see any "oscam stopped" message in LiveLog via OscamWebif) ? Or what exactly ?

 

You need to write more details about your problem.

 

You want to help with the setup, but did not write any details. Who is your provider, what encoding is used by your card, what CAID and possibly PROVID is used, etc. .

 

BTW, please set up a new and your own TOPIC for the future. Don't write your completely different problem in someone else's TOPIC. Uhm ... :-/



Re: How to use setup the Cccam to Oscam #13 birdana

  • Senior Member
  • 1 posts

0
Neutral

Posted 14 June 2021 - 08:14

Hi dear i converted cccam cline to oscam. Then i paste it on oscam.server . I added a user in oscam.user . But i cannot open chanells with my reciver . Its cruiser

Sent from my ALP-L29 using Tapatalk

Re: How to use setup the Cccam to Oscam #14 Pr2

  • PLi® Contributor
  • 6,046 posts

+256
Excellent

Posted 14 June 2021 - 10:29

Go to streamboard this the best place to get support for OScam.


NO SUPPORT by PM, it is a forum make your question public so everybody can benefit from the question/answer.
If you think that my answer helps you, you can press the up arrow in bottom right of the answer.

Wanna help with OpenPLi Translation? Please read our Wiki Information for translators

Sat: Hotbird 13.0E, Astra 19.2E, Eutelsat5A 5.0W
VU+ Solo 4K: 2*DVB-S2 + 2*DVB-C/T/T2 (used in DVB-C) & Duo 4K: 2*DVB-S2X + DVB-C (FBC)

AB-Com: PULSe 4K 1*DVB-S2X (+ DVB-C/T/T2)
Edision OS Mio 4K: 1*DVB-S2X + 1*DVB-C/T/T2
 


Re: How to use setup the Cccam to Oscam #15 s3n0

  • Senior Member
  • 640 posts

+62
Good

Posted 14 June 2021 - 18:02

It's more complicated. You may also need a "dvbapi" user (file "oscam.conf" and "oscam.user") and/or an AU (AutoUpdate) feature.

 

It all depends on the oscam server and the whole network.

 

BTW, in my opinion, a softcam in the client position is a better CCam than an OSCam. As a softcam server it is better to use OSCam.



Re: How to use setup the Cccam to Oscam #16 Dimmie

  • Senior Member
  • 2,338 posts

+33
Good

Posted 14 June 2021 - 23:00

Hi guys

I using Cccam in my device VU+Solo2

but i heard Oscam is better.

Please eplain/define what you heard is better when using Oscam.


Edited by Dimmie, 14 June 2021 - 23:01.


Re: How to use setup the Cccam to Oscam #17 s3n0

  • Senior Member
  • 640 posts

+62
Good

Posted 15 June 2021 - 08:13

@Dimmie it's an old topic :).

 

The guy @birdana just wanted advice on converting C-Lines to Oscam configurations. That's why he wrote on this topic, because it was also addressed here.



Re: How to use setup the Cccam to Oscam #18 pulkass

  • New Member
  • 2 posts

0
Neutral

Posted 28 June 2021 - 08:12

 

 

if you already have installed OScam from 'Now in my Plugin /downloads/softcams' then you just need to add your c-line/mg line into your oscam directory 

 

this is how you do it 

 

1. Connect Dcc 

2. FTP > etc /  tuxbox / config / 

in config you will see many files but you only need 2 of them

oscam.server

oscam.conf

 

edit oscam.server and put these lines including your own cline.

 

[reader]
label                         = CCcam1
protocol                      = cccam
device                        = ABC123.COM,12345  (ADD YOUR SERVER LINK, & PORT
user                          = 123456      (USER NAME CLINE)
password                      = 123456   (PASSWORD FROM CLINE
inactivitytimeout             = 5
group                         = 2
disablecrccws                 = 1
cccversion                    = 2.2.1
cccwantemu                    = 1

 

Thanks it is done but  i used   cccam2oscam ver 1.2 .After convert I saved 2 format file.oscam.server &oscam.user and transfer to etc /  tuxbox / config/oscam-emu and replace with old files .so its working correctly.

My oscam emu is "git1825+c46c72d-r0.0"

Thanks and i hope helpful for guys

 

 

Shall I be pasting the same lines in both files ??? oscam server and oscam conf ????? Thanks

 



Re: How to use setup the Cccam to Oscam #19 s3n0

  • Senior Member
  • 640 posts

+62
Good

Posted 29 June 2021 - 13:20

 

Shall I be pasting the same lines in both files ??? oscam server and oscam conf ????? Thanks

 

Which lines do you mean ? You're probably asking the wrong question.

 

The oscam.conf and oscam.user files are two different and separated files. Usually oscam.conf + oscam.user + oscam.server files are required. In the attachment you will find a clean oscam-configuration without the advanced settings.

 

You can add a remote reader to the oscam.server file. This remote reader will basicaly connect to your cccam server. Oscam himself selects the reader that contains the necessary CAIDs to decode the satellite stream.

Attached Files


Edited by s3n0, 29 June 2021 - 13:24.



2 user(s) are reading this topic

0 members, 2 guests, 0 anonymous users