Jump to content


Photo

Dreambox DM520HD + OpenPLI 6.2, missing channels

dm520hd missing channels tuning problem

  • Please log in to reply
8 replies to this topic

#1 boinkboink

  • Member
  • 9 posts

0
Neutral

Posted 1 April 2020 - 07:28

Hi,

I'm new to this forum and purchased my Dreambox yesterday, so bear with me... ;-)

 

When I got my DM520HD i did an automatic channel scan, and it found all channels that it should find, all good.

 

After that I decided to switch to OpenPLI. When it was done I did a new channel scan, and it found all channels except from one frequency/channel. I've tried to do a manual scan of it, but with no luck. What am I doing wrong? Nothing else has change except the firmware, so it "has" to be related to this.

A thing worth mentioning is that the channels on these frequency are HD channels, and this is the only frequency with HD channels on it. Could this be related?

 

I'm using terrestrial (DVB-T/T2) and the frequency I'm trying to tune is 514 MHz/Channel 26.


Edited by boinkboink, 1 April 2020 - 07:30.


Re: Dreambox DM520HD + OpenPLI 6.2, missing channels #2 Trial

  • Senior Member
  • 1,127 posts

+34
Good

Posted 1 April 2020 - 07:36

Hi,

which region?

 

Ralf



Re: Dreambox DM520HD + OpenPLI 6.2, missing channels #3 boinkboink

  • Member
  • 9 posts

0
Neutral

Posted 1 April 2020 - 07:53

Hi,

which region?

 

Ralf

Hi,
Not sure if I answer the right thing now :). But, Europe/Sweden.



Re: Dreambox DM520HD + OpenPLI 6.2, missing channels #4 betacentauri

  • PLi® Core member
  • 7,185 posts

+323
Excellent

Posted 1 April 2020 - 11:03

Sorry, we don’t support your dreambox.
https://openpli.org/download/dreambox/
Xtrend ET-9200, ET-8000, ET-10000, OpenPliPC on Ubuntu 12.04

Re: Dreambox DM520HD + OpenPLI 6.2, missing channels #5 boinkboink

  • Member
  • 9 posts

0
Neutral

Posted 1 April 2020 - 12:20

Sorry, we don’t support your dreambox.

Ok, so I guess that DM520 HD counts as DM500 HD then? Makes sense, but maybe you should clarify this in the linked page since there also exists a DM500 HD box.

In that case, if no one has an answer to my problem, can you please guide me on how I can reflash my box with stock firmware? Is it as easy as downloading stock firmware from the Dreambox site and flash it via the menu om the box? Or are there any risks with this? I can't seem to reach the rescue mode anymore.


Edited by boinkboink, 1 April 2020 - 12:20.


Re: Dreambox DM520HD + OpenPLI 6.2, missing channels #6 WanWizard

  • PLi® Core member
  • 68,309 posts

+1,719
Excellent

Posted 1 April 2020 - 12:24

No. Totally different box.

 

We have never made software for a DM520, what you have is a fake.


Currently in use: VU+ Duo 4K (2xFBC S2), VU+ Solo 4K (1xFBC S2), uClan Usytm 4K Pro (S2+T2), Octagon SF8008 (S2+T2), Zgemma H9.2H (S2+T2)

Due to my bad health, I will not be very active at times and may be slow to respond. I will not read the forum or PM on a regular basis.

Many answers to your question can be found in our new and improved wiki.


Re: Dreambox DM520HD + OpenPLI 6.2, missing channels #7 boinkboink

  • Member
  • 9 posts

0
Neutral

Posted 1 April 2020 - 13:12

No. Totally different box.

 

We have never made software for a DM520, what you have is a fake.

Ok. How can I check if it's fake or not?



Re: Dreambox DM520HD + OpenPLI 6.2, missing channels #8 littlesat

  • PLi® Core member
  • 56,123 posts

+685
Excellent

Posted 1 April 2020 - 13:46

By downloading an image only from here... https://openpli.org/download
 
The rest is FAKE...


WaveFrontier 28.2E | 23.5E | 19.2E | 16E | 13E | 10/9E | 7E | 5E | 1W | 4/5W | 15W


Re: Dreambox DM520HD + OpenPLI 6.2, missing channels #9 boinkboink

  • Member
  • 9 posts

0
Neutral

Posted 1 April 2020 - 16:02

By downloading an image only from here...
 
The rest is FAKE...

Ok. I got it from pli-images.net.
I see that it's fake...

But, since it seems impossible to contact them, is there anyone that can answer my previous question regarding firmware? I know that you can't guarantee/be responsible for anything since the firmware I'm using now isn't yours...
 

can you please guide me on how I can reflash my box with stock firmware? Is it as easy as downloading stock firmware from the Dreambox site and flash it via the menu om the box? Or are there any risks with this? I can't seem to reach the rescue mode anymore.

 




1 user(s) are reading this topic

0 members, 1 guests, 0 anonymous users