Jump to content


Photo

Error beim bauen vom Vu+ Solose Image.


  • Please log in to reply
246 replies to this topic

Re: Error beim bauen vom Vu+ Solose Image. #181 torres

  • Senior Member
  • 147 posts

0
Neutral

Posted 30 April 2023 - 18:25

I changed the oscam recipe, the protocol had to be changed from https into git......

the new recipe which one could you post to me thanks



Re: Error beim bauen vom Vu+ Solose Image. #182 Tech

  • Forum Moderator
    PLi® Core member
  • 14,944 posts

+488
Excellent

Posted 30 April 2023 - 18:53

I changed the recipe so that it is using a local cloned source and therefore not depending anymore to the source if not available.

Aan de rand van de afgrond is een stap voorwaarts niet altijd vooruitgang....

On the edge of the abyss, a step forward is not always progress....

Hardware: 2x Daily used Vu+ Ultimo 4K - Vu+ Duo 4K SE and a lot more.... - VisioSat BiBigsat - Jultec Unicable Multiswitch 4 positions: 19.2/23.5/28.2 East - Diseqc motorized flatdish antenna

Software : HomeBuild OpenPLi Develop and Scarthgap builds, local cards driven by OsCam

Press the Geplaatste afbeelding button on the buttom right of this message ;)

Have you tried our wiki yet? Many answers can be found in our OpenPLi wiki


Re: Error beim bauen vom Vu+ Solose Image. #183 Tech

  • Forum Moderator
    PLi® Core member
  • 14,944 posts

+488
Excellent

Posted 30 April 2023 - 20:29

You can also try to edit ../meta-openpli/recipes-openpli/enigma2-softcams/enigma2-plugin-softcams-oscam.bb
 
 
SRC_URI = "git://repo.or.cz/oscam.git;protocol=git"

Aan de rand van de afgrond is een stap voorwaarts niet altijd vooruitgang....

On the edge of the abyss, a step forward is not always progress....

Hardware: 2x Daily used Vu+ Ultimo 4K - Vu+ Duo 4K SE and a lot more.... - VisioSat BiBigsat - Jultec Unicable Multiswitch 4 positions: 19.2/23.5/28.2 East - Diseqc motorized flatdish antenna

Software : HomeBuild OpenPLi Develop and Scarthgap builds, local cards driven by OsCam

Press the Geplaatste afbeelding button on the buttom right of this message ;)

Have you tried our wiki yet? Many answers can be found in our OpenPLi wiki


Re: Error beim bauen vom Vu+ Solose Image. #184 torres

  • Senior Member
  • 147 posts

0
Neutral

Posted 1 May 2023 - 09:49

 

You can also try to edit ../meta-openpli/recipes-openpli/enigma2-softcams/enigma2-plugin-softcams-oscam.bb
 
 
SRC_URI = "git://repo.or.cz/oscam.git;protocol=git"

A thousand thanks

 



Re: Error beim bauen vom Vu+ Solose Image. #185 torres

  • Senior Member
  • 147 posts

0
Neutral

Posted 30 May 2023 - 07:21

Hello I am having this error can someone help me thanks a lot

 

torres@torres-Nitro-AN517-54:~/cores/openpli-oe-core$ MACHINE=vuuno make image
Building image for vuuno
Loading cache: 100% |############################################| Time: 0:00:00
Loaded 5162 entries from dependency cache.
Parsing recipes: 100% |##########################################| Time: 0:00:05
Parsing of 3878 .bb files complete (3585 cached, 293 parsed). 5455 targets, 1116 skipped, 0 masked, 0 errors.
NOTE: Resolving any missing task queue dependencies

Build Configuration:
BB_VERSION           = "1.50.0"
BUILD_SYS            = "x86_64-linux"
NATIVELSBSTRING      = "ubuntu-20.04"
TARGET_SYS           = "mipsel-oe-linux"
MACHINE              = "vuuno"
DISTRO               = "openpli"
DISTRO_VERSION       = "PY3"
TUNE_FEATURES        = "o32 fpu-hard mips32"
TARGET_FPU           = ""
meta-local           = "develop:d295e9f544d4268bd682e748bc135d67941991df"
meta-oe              
meta-filesystems     
meta-multimedia      
meta-networking      
meta-python          
meta-webserver       = "HEAD:786d3aa313e31a718acc9611ba3adb60573ec458"
meta                 = "HEAD:fbbb689c8df7f82644b8a9bc5bb6884bc6516660"
meta-openpli         = "develop:d295e9f544d4268bd682e748bc135d67941991df"
meta-dream           = "HEAD:ec18fc99ff99b0942c48833c1e9463acc22c90b6"
meta-vuplus          = "HEAD:2de8525db321941d7a2db1f8b63c943b7e07c990"
meta-xsarius         = "HEAD:5b2e4137da08bf53a7ee6a1a3e39dd5ba6202cfc"
meta-qviart          = "HEAD:12519239fae99f969dc4cddba6e941aef3f93c4e"
meta-xp              = "HEAD:587dcae4d5c6d3803323a454db9251d921864512"
meta-xtrend          = "HEAD:40ac5c8c36bbc0c5ef3b40c58825bfb678b9c7f3"
meta-formuler        = "HEAD:cf4c86781456d3145615c2b215da73dba19c7f88"
meta-gfutures        = "HEAD:4bca02cd3b05f2251ea204384583543022085927"
meta-xpeedc          = "HEAD:f93a07510cc3afddeebe5d35cc161eaa7671c906"
meta-zgemma          = "HEAD:8556aa6bff13a3b05b7f35d1866d435436219548"
meta-edision         = "HEAD:e24878766b350987973a02efcb0fd1ea41b79766"
meta-miraclebox      = "HEAD:391cae1d4301f057872680a23ff217f0893169d6"
meta-spycat          = "HEAD:fdeec8614f500de08121e35c2b758cfac2fd4849"
meta-gi              = "HEAD:c31f692f5c3cb0dae1eb92f7e396fc4da34ee40c"
meta-sab             = "HEAD:3d4de2f9b202dbb495a1cfe505b8efd62d1fdaa4"
meta-gigablue        = "HEAD:600b4bbb31f09dce206fd63ff266af97c033a7ed"
meta-amiko           = "HEAD:36153a0fb824ad06bfeec16aba668d7bf85b1a66"
meta-axas            = "HEAD:79fe52058ff4f43d28e9ca9c7b75df1f6c377d48"
meta-maxytec         = "HEAD:055f03398724e1250dfe87fffe3789895359e795"
meta-octagon         = "HEAD:94f0780ea9bbf8a552e64868f187985df09a695c"
meta-uclan           = "HEAD:b7b38f415483958e10a5f941d5dbb8f44e3afa12"
meta-abcom           = "HEAD:8fb49bf48ffaf368b62ba46bb147d66b40238500"
meta-python2         = "HEAD:8db9e4f6ceae33d7a4f55453d31e69f9858af4eb"
meta-qt5             = "HEAD:cf6ffcbad5275a3428f6046468a0c9d572e813d1"

Initialising tasks: 100% |#######################################| Time: 0:00:05
Sstate summary: Wanted 335 Local 323 Network 0 Missed 12 Current 1867 (96% match, 99% complete)
NOTE: Executing Tasks
ERROR: hmp-usb-dvb-t2-c-V141106-r0 do_compile: oe_runmake failed
ERROR: hmp-usb-dvb-t2-c-V141106-r0 do_compile: ExecutionError('/home/torres/cores/openpli-oe-core/build/tmp/work/vuuno-oe-linux/hmp-usb-dvb-t2-c/V141106-r0/temp/run.do_compile.2397887', 1, None, None)
ERROR: Logfile of failure stored in: /home/torres/cores/openpli-oe-core/build/tmp/work/vuuno-oe-linux/hmp-usb-dvb-t2-c/V141106-r0/temp/log.do_compile.2397887
Log data follows:
| DEBUG: Executing shell function do_compile
| NOTE: make -j 16 LINUX_SRC=/home/torres/cores/openpli-oe-core/build/tmp/work-shared/vuuno/kernel-source OUTDIR=/home/torres/cores/openpli-oe-core/build/tmp/work-shared/vuuno/kernel-build-artifacts KDIR=/home/torres/cores/openpli-oe-core/build/tmp/work-shared/vuuno/kernel-source DIR=/home/torres/cores/openpli-oe-core/build/tmp/work-shared/vuuno/kernel-source
| make -C /home/torres/cores/openpli-oe-core/build/tmp/work/vuuno-oe-linux/hmp-usb-dvb-t2-c/V141106-r0/media_build-bst-14/v4l
| make[1]: Entering directory '/home/torres/cores/openpli-oe-core/build/tmp/work/vuuno-oe-linux/hmp-usb-dvb-t2-c/V141106-r0/media_build-bst-14/v4l'
| make -C firmware prep
| creating symbolic links...
| make[2]: Entering directory '/home/torres/cores/openpli-oe-core/build/tmp/work/vuuno-oe-linux/hmp-usb-dvb-t2-c/V141106-r0/media_build-bst-14/v4l/firmware'
| make[2]: Leaving directory '/home/torres/cores/openpli-oe-core/build/tmp/work/vuuno-oe-linux/hmp-usb-dvb-t2-c/V141106-r0/media_build-bst-14/v4l/firmware'
| make -C firmware
| make[2]: Entering directory '/home/torres/cores/openpli-oe-core/build/tmp/work/vuuno-oe-linux/hmp-usb-dvb-t2-c/V141106-r0/media_build-bst-14/v4l/firmware'
| make[2]: Nothing to be done for 'default'.
| make[2]: Leaving directory '/home/torres/cores/openpli-oe-core/build/tmp/work/vuuno-oe-linux/hmp-usb-dvb-t2-c/V141106-r0/media_build-bst-14/v4l/firmware'
| Kernel build directory is /home/torres/cores/openpli-oe-core/build/tmp/work-shared/vuuno/kernel-build-artifacts
| make -C /home/torres/cores/openpli-oe-core/build/tmp/work-shared/vuuno/kernel-build-artifacts SUBDIRS=/home/torres/cores/openpli-oe-core/build/tmp/work/vuuno-oe-linux/hmp-usb-dvb-t2-c/V141106-r0/media_build-bst-14/v4l  modules
| make[2]: Entering directory '/home/torres/cores/openpli-oe-core/build/tmp/work-shared/vuuno/kernel-build-artifacts'
|   Building modules, stage 2.
|   MODPOST 5 modules
| make[2]: Leaving directory '/home/torres/cores/openpli-oe-core/build/tmp/work-shared/vuuno/kernel-build-artifacts'
| ./scripts/rmmod.pl check
| Can't locate Proc/ProcessTable.pm in @INC (you may need to install the Proc::ProcessTable module) (@INC contains: /etc/perl /usr/local/lib/x86_64-linux-gnu/perl/5.30.0 /usr/local/share/perl/5.30.0 /usr/lib/x86_64-linux-gnu/perl5/5.30 /usr/share/perl5 /usr/lib/x86_64-linux-gnu/perl/5.30 /usr/share/perl/5.30 /usr/local/lib/site_perl /usr/lib/x86_64-linux-gnu/perl-base) at ./scripts/rmmod.pl line 4.
| BEGIN failed--compilation aborted at ./scripts/rmmod.pl line 4.
| make[1]: Leaving directory '/home/torres/cores/openpli-oe-core/build/tmp/work/vuuno-oe-linux/hmp-usb-dvb-t2-c/V141106-r0/media_build-bst-14/v4l'
| make[1]: *** [Makefile:53: default] Error 2
| make: *** [Makefile:26: all] Error 2
| ERROR: oe_runmake failed
| WARNING: /home/torres/cores/openpli-oe-core/build/tmp/work/vuuno-oe-linux/hmp-usb-dvb-t2-c/V141106-r0/temp/run.do_compile.2397887:184 exit 1 from 'exit 1'
| WARNING: Backtrace (BB generated script):
|     #1: bbfatal_log, /home/torres/cores/openpli-oe-core/build/tmp/work/vuuno-oe-linux/hmp-usb-dvb-t2-c/V141106-r0/temp/run.do_compile.2397887, line 184
|     #2: die, /home/torres/cores/openpli-oe-core/build/tmp/work/vuuno-oe-linux/hmp-usb-dvb-t2-c/V141106-r0/temp/run.do_compile.2397887, line 165
|     #3: oe_runmake, /home/torres/cores/openpli-oe-core/build/tmp/work/vuuno-oe-linux/hmp-usb-dvb-t2-c/V141106-r0/temp/run.do_compile.2397887, line 154
|     #4: do_compile, /home/torres/cores/openpli-oe-core/build/tmp/work/vuuno-oe-linux/hmp-usb-dvb-t2-c/V141106-r0/temp/run.do_compile.2397887, line 148
|     #5: main, /home/torres/cores/openpli-oe-core/build/tmp/work/vuuno-oe-linux/hmp-usb-dvb-t2-c/V141106-r0/temp/run.do_compile.2397887, line 188
| ERROR: ExecutionError('/home/torres/cores/openpli-oe-core/build/tmp/work/vuuno-oe-linux/hmp-usb-dvb-t2-c/V141106-r0/temp/run.do_compile.2397887', 1, None, None)
ERROR: Task (/home/torres/cores/openpli-oe-core/meta-vuplus/recipes-driver/hmp/hmp-usb-dvb-t2-c.bb:do_compile) failed with exit code '1'
NOTE: Tasks Summary: Attempted 6745 tasks of which 6740 didn't need to be rerun and 1 failed.

Summary: 1 task failed:
  /home/torres/cores/openpli-oe-core/meta-vuplus/recipes-driver/hmp/hmp-usb-dvb-t2-c.bb:do_compile
Summary: There were 2 ERROR messages shown, returning a non-zero exit code.
make: *** [Makefile:131: image] Errore 1
torres@torres-Nitro-AN517-54:~/cores/openpli-oe-core$

 



Re: Error beim bauen vom Vu+ Solose Image. #186 neo

  • PLi® Contributor
  • 715 posts

+48
Good

Posted 30 May 2023 - 09:26

Can't locate Proc/ProcessTable.pm in @INC (you may need to install the Proc::ProcessTable module)

You're missing a Perl module.



Re: Error beim bauen vom Vu+ Solose Image. #187 torres

  • Senior Member
  • 147 posts

0
Neutral

Posted 30 May 2023 - 10:10

Can't locate Proc/ProcessTable.pm in @INC (you may need to install the Proc::ProcessTable module)

You're missing a Perl module.

 

 

Thanks but where does it go?

 



Re: Error beim bauen vom Vu+ Solose Image. #188 scriptmelvin †

  • PLi® Contributor
  • 720 posts

+46
Good

Posted 30 May 2023 - 12:46

Try this:

sudo apt install libproc-processtable-perl

Edited by scriptmelvin, 30 May 2023 - 12:50.

Sorry to inform you this member, my brother, passed away.

Re: Error beim bauen vom Vu+ Solose Image. #189 torres

  • Senior Member
  • 147 posts

0
Neutral

Posted 30 May 2023 - 19:14

 

Try this:

sudo apt install libproc-processtable-perl

Thank you very much for helping

 



Re: Error beim bauen vom Vu+ Solose Image. #190 torres

  • Senior Member
  • 147 posts

0
Neutral

Posted 9 July 2023 - 10:27

Hello I have a question to ask I have compiled a Qviart Dual 4k image but that is a problem the remote control is not working can you tell me why thank you very much



Re: Error beim bauen vom Vu+ Solose Image. #191 Dimitrij

  • PLi® Core member
  • 10,370 posts

+354
Excellent

Posted 10 July 2023 - 08:46

Hello I have a question to ask I have compiled a Qviart Dual 4k image but that is a problem the remote control is not working can you tell me why thank you very much

The original image does not fit?
https://openpli.org/.../qviart/Dual 4K


GigaBlue UHD Quad 4K /Lunix3-4K/Duo 4K


Re: Error beim bauen vom Vu+ Solose Image. #192 torres

  • Senior Member
  • 147 posts

0
Neutral

Posted 26 September 2023 - 18:43

Good evening, I'm trying to compile version 9.0 and it's giving me this error, can anyone help me thanks

 

torres@torres-Nitro-AN517-54:~/Immagini/openpli-oe-core$ MACHINE=vuzero4k make feed
Building feed for vuzero4k
Loading cache: 100% |############################################| Time: 0:00:00
Loaded 5365 entries from dependency cache.
Parsing recipes: 100% |##########################################| Time: 0:00:02
Parsing of 3905 .bb files complete (3787 cached, 118 parsed). 5482 targets, 1074 skipped, 0 masked, 0 errors.
NOTE: Resolving any missing task queue dependencies

Build Configuration:
BB_VERSION           = "1.50.0"
BUILD_SYS            = "x86_64-linux"
NATIVELSBSTRING      = "ubuntu-20.04"
TARGET_SYS           = "arm-oe-linux-gnueabi"
MACHINE              = "vuzero4k"
DISTRO               = "openpli"
DISTRO_VERSION       = "homebuild"
TUNE_FEATURES        = "arm armv7a vfp neon callconvention-hard"
TARGET_FPU           = "hard"
meta-local           = "release-9.0:9135e9f97603676513749573ecc0aa7996c0bb15"
meta-oe              
meta-filesystems     
meta-multimedia      
meta-networking      
meta-python          
meta-webserver       = "HEAD:786d3aa313e31a718acc9611ba3adb60573ec458"
meta                 = "HEAD:fbbb689c8df7f82644b8a9bc5bb6884bc6516660"
meta-openpli         = "release-9.0:9135e9f97603676513749573ecc0aa7996c0bb15"
meta-dream           = "HEAD:cb31cb23b374acbe6b9a8c686e7e4210f706d6bd"
meta-vuplus          = "HEAD:f2a8bad4710bb1f2898e21cef88c09365231ad90"
meta-xsarius         = "HEAD:5b2e4137da08bf53a7ee6a1a3e39dd5ba6202cfc"
meta-qviart          = "HEAD:3ec4f04e3a7a25f5f86efd26a3d1d6cfdf858dc4"
meta-xp              = "HEAD:587dcae4d5c6d3803323a454db9251d921864512"
meta-xtrend          = "HEAD:40ac5c8c36bbc0c5ef3b40c58825bfb678b9c7f3"
meta-formuler        = "HEAD:cf4c86781456d3145615c2b215da73dba19c7f88"
meta-gfutures        = "HEAD:3ea26378f0acaa6e8e16eebcabb2166af75be36f"
meta-xpeedc          = "HEAD:f93a07510cc3afddeebe5d35cc161eaa7671c906"
meta-zgemma          = "HEAD:8556aa6bff13a3b05b7f35d1866d435436219548"
meta-edision         = "HEAD:e24878766b350987973a02efcb0fd1ea41b79766"
meta-miraclebox      = "HEAD:391cae1d4301f057872680a23ff217f0893169d6"
meta-spycat          = "HEAD:fdeec8614f500de08121e35c2b758cfac2fd4849"
meta-gi              = "HEAD:c31f692f5c3cb0dae1eb92f7e396fc4da34ee40c"
meta-sab             = "HEAD:3d4de2f9b202dbb495a1cfe505b8efd62d1fdaa4"
meta-gigablue        = "HEAD:600b4bbb31f09dce206fd63ff266af97c033a7ed"
meta-amiko           = "HEAD:36153a0fb824ad06bfeec16aba668d7bf85b1a66"
meta-axas            = "HEAD:79fe52058ff4f43d28e9ca9c7b75df1f6c377d48"
meta-maxytec         = "HEAD:055f03398724e1250dfe87fffe3789895359e795"
meta-octagon         = "HEAD:94f0780ea9bbf8a552e64868f187985df09a695c"
meta-uclan           = "HEAD:b7b38f415483958e10a5f941d5dbb8f44e3afa12"
meta-abcom           = "HEAD:8fb49bf48ffaf368b62ba46bb147d66b40238500"
meta-python2         = "HEAD:8db9e4f6ceae33d7a4f55453d31e69f9858af4eb"
meta-qt5             = "HEAD:cf6ffcbad5275a3428f6046468a0c9d572e813d1"

Initialising tasks: 100% |#######################################| Time: 0:00:07
Sstate summary: Wanted 864 Local 727 Network 0 Missed 137 Current 4067 (84% match, 97% complete)
Removing 2 stale sstate objects for arch armv7ahf-neon: 100% |###| Time: 0:00:00
NOTE: Executing Tasks
WARNING: minisatip-1.0d+gitAUTOINC+89ffd78aa9-r0 do_fetch: Failed to fetch URL git://github.com/catalinii/minisatip.git;protocol=http;branch=master;protocol=https, attempting MIRRORS if available
ERROR: minisatip-1.0d+gitAUTOINC+89ffd78aa9-r0 do_fetch: Fetcher failure: Unable to find revision 89ffd78aa9ec6f210e3142ca93effbf8311c6641 in branch master even from upstream
ERROR: minisatip-1.0d+gitAUTOINC+89ffd78aa9-r0 do_fetch: Fetcher failure for URL: 'git://github.com/catalinii/minisatip.git;protocol=http;branch=master;protocol=https'. Unable to fetch URL from any source.
ERROR: Logfile of failure stored in: /home/torres/Immagini/openpli-oe-core/build/tmp/work/armv7ahf-neon-oe-linux-gnueabi/minisatip/1.0d+gitAUTOINC+89ffd78aa9-r0/temp/log.do_fetch.1221594
ERROR: Task (/home/torres/Immagini/openpli-oe-core/meta-openpli/recipes-openpli/satip/minisatip.bb:do_fetch) failed with exit code '1'
NOTE: Tasks Summary: Attempted 12428 tasks of which 12399 didn't need to be rerun and 1 failed.

Summary: 1 task failed:
  /home/torres/Immagini/openpli-oe-core/meta-openpli/recipes-openpli/satip/minisatip.bb:do_fetch
Summary: There was 1 WARNING message shown.
Summary: There were 2 ERROR messages shown, returning a non-zero exit code.
make: *** [Makefile:135: feed] Errore 1
torres@torres-Nitro-AN517-54:~/Immagini/openpli-oe-core$



 



Re: Error beim bauen vom Vu+ Solose Image. #193 WanWizard

  • PLi® Core member
  • 70,764 posts

+1,830
Excellent

Posted 26 September 2023 - 19:33

Looks pretty obvious?

Failed to fetch URL git://github.com/catalinii/minisatip.git

so github has a problem.

Wait until they've fixed it, then try again.


Currently in use: VU+ Duo 4K (2xFBC S2), VU+ Solo 4K (1xFBC S2), uClan Usytm 4K Ultimate (S2+T2), Octagon SF8008 (S2+T2), Zgemma H9.2H (S2+T2)

Due to my bad health, I will not be very active at times and may be slow to respond. I will not read the forum or PM on a regular basis.

Many answers to your question can be found in our new and improved wiki.


Re: Error beim bauen vom Vu+ Solose Image. #194 torres

  • Senior Member
  • 147 posts

0
Neutral

Posted 27 September 2023 - 04:28

Looks pretty obvious?

Failed to fetch URL git://github.com/catalinii/minisatip.git

so github has a problem.

Wait until they've fixed it, then try again.

thanks wanwizard



Re: Error beim bauen vom Vu+ Solose Image. #195 torres

  • Senior Member
  • 147 posts

0
Neutral

Posted 14 October 2023 - 10:18

Good morning I'm trying to compile version 9.0 and it gives me this error, can anyone help me thanks

 

 

torres@torres-Nitro-AN517-54:~/Documenti/openpli-oe-core$ MACHINE=vuzero4k make feed
Building feed for vuzero4k
Loading cache: 100% |############################################| Time: 0:00:00
Loaded 5364 entries from dependency cache.
WARNING: /home/torres/Documenti/openpli-oe-core/meta-openpli/recipes-mediacenter/kodi-addons/kodi-addon-pvr-mediaportal.tvserver.bb: Exception during build_dependencies for S
WARNING: /home/torres/Documenti/openpli-oe-core/meta-openpli/recipes-mediacenter/kodi-addons/kodi-addon-pvr-mediaportal.tvserver.bb: Error during finalise of /home/torres/Documenti/openpli-oe-core/meta-openpli/recipes-mediacenter/kodi-addons/kodi-addon-pvr-mediaportal.tvserver.bb
WARNING: /home/torres/Documenti/openpli-oe-core/meta-openpli/recipes-mediacenter/kodi-addons/kodi-addon-pvr-hdhomerun.bb: Exception during build_dependencies for AUTOREV
WARNING: /home/torres/Documenti/openpli-oe-core/meta-openpli/recipes-mediacenter/kodi-addons/kodi-addon-pvr-hdhomerun.bb: Error during finalise of /home/torres/Documenti/openpli-oe-core/meta-openpli/recipes-mediacenter/kodi-addons/kodi-addon-pvr-hdhomerun.bb
ERROR: ExpansionError during parsing /home/torres/Documenti/openpli-oe-core/meta-openpli/recipes-mediacenter/kodi-addons/kodi-addon-pvr-mediaportal.tvserver.bb
Traceback (most recent call last):
  File "/home/torres/Documenti/openpli-oe-core/bitbake/lib/bb/fetch2/__init__.py", line 1179, in srcrev_internal_helper(ud=<bb.fetch2.FetchData object at 0x7f846ca2f4c0>, d=<bb.data_smart.DataSmart object at 0x7f846ca032b0>, name='pvrmediaportal.tvserver'):
         if srcrev == "AUTOINC":
    >        srcrev = ud.method.latest_revision(ud, d, name)
     
  File "/home/torres/Documenti/openpli-oe-core/bitbake/lib/bb/fetch2/__init__.py", line 1588, in Git.latest_revision(ud=<bb.fetch2.FetchData object at 0x7f846ca2f4c0>, d=<bb.data_smart.DataSmart object at 0x7f846ca032b0>, name='pvrmediaportal.tvserver'):
             except KeyError:
    >            revs[key] = rev = self._latest_revision(ud, d, name)
                 return rev
  File "/home/torres/Documenti/openpli-oe-core/bitbake/lib/bb/fetch2/git.py", line 711, in Git._latest_revision(ud=<bb.fetch2.FetchData object at 0x7f846ca2f4c0>, d=<bb.data_smart.DataSmart object at 0x7f846ca032b0>, name='pvrmediaportal.tvserver'):
             """
    >        output = self._lsremote(ud, d, "")
             # Tags of the form ^{} may not work, need to fallback to other form
  File "/home/torres/Documenti/openpli-oe-core/bitbake/lib/bb/fetch2/git.py", line 700, in Git._lsremote(ud=<bb.fetch2.FetchData object at 0x7f846ca2f4c0>, d=<bb.data_smart.DataSmart object at 0x7f846ca032b0>, search=''):
                     bb.fetch2.check_network_access(d, cmd, repourl)
    >            output = runfetchcmd(cmd, d, True)
                 if not output:
  File "/home/torres/Documenti/openpli-oe-core/bitbake/lib/bb/fetch2/__init__.py", line 896, in runfetchcmd(cmd='export PSEUDO_DISABLED=1; export DBUS_SESSION_BUS_ADDRESS="unix:path=/run/user/1000/bus"; export SSH_AGENT_PID="1609"; export SSH_AUTH_SOCK="/run/user/1000/keyring/ssh"; export PATH="/home/torres/Documenti/openpli-oe-core/openembedded-core/scripts:/home/torres/Documenti/openpli-oe-core/build/tmp/work/vuzero4k-oe-linux-gnueabi/kodi-addon-pvr-mediaportal.tvserver/fetcheravoidrecurse-fetcheravoidrecurse/recipe-sysroot-native/usr/bin/arm-oe-linux-gnueabi:/home/torres/Documenti/openpli-oe-core/build/tmp/work/vuzero4k-oe-linux-gnueabi/kodi-addon-pvr-mediaportal.tvserver/fetcheravoidrecurse-fetcheravoidrecurse/recipe-sysroot/usr/bin/crossscripts:/home/torres/Documenti/openpli-oe-core/build/tmp/work/vuzero4k-oe-linux-gnueabi/kodi-addon-pvr-mediaportal.tvserver/fetcheravoidrecurse-fetcheravoidrecurse/recipe-sysroot-native/usr/sbin:/home/torres/Documenti/openpli-oe-core/build/tmp/work/vuzero4k-oe-linux-gnueabi/kodi-addon-pvr-mediaportal.tvserver/fetcheravoidrecurse-fetcheravoidrecurse/recipe-sysroot-native/usr/bin:/home/torres/Documenti/openpli-oe-core/build/tmp/work/vuzero4k-oe-linux-gnueabi/kodi-addon-pvr-mediaportal.tvserver/fetcheravoidrecurse-fetcheravoidrecurse/recipe-sysroot-native/sbin:/home/torres/Documenti/openpli-oe-core/build/tmp/work/vuzero4k-oe-linux-gnueabi/kodi-addon-pvr-mediaportal.tvserver/fetcheravoidrecurse-fetcheravoidrecurse/recipe-sysroot-native/bin:/home/torres/Documenti/openpli-oe-core/bitbake/bin:/home/torres/Documenti/openpli-oe-core/build/tmp/hosttools"; export HOME="/home/torres"; git -c core.fsyncobjectfiles=0 ls-remote https://github.com/k...al.tvserver.git ', d=<bb.data_smart.DataSmart object at 0x7f846ca2f8e0>, quiet=True, cleanup=[], log=None, workdir=None):
     
    >        raise FetchError(error_message)
     
bb.data_smart.ExpansionError: Failure expanding variable SRCPV, expression was ${@bb.fetch2.get_srcrev(d)} which triggered exception FetchError: Fetcher failure: Fetch command export PSEUDO_DISABLED=1; export DBUS_SESSION_BUS_ADDRESS="unix:path=/run/user/1000/bus"; export SSH_AGENT_PID="1609"; export SSH_AUTH_SOCK="/run/user/1000/keyring/ssh"; export PATH="/home/torres/Documenti/openpli-oe-core/openembedded-core/scripts:/home/torres/Documenti/openpli-oe-core/build/tmp/work/vuzero4k-oe-linux-gnueabi/kodi-addon-pvr-mediaportal.tvserver/fetcheravoidrecurse-fetcheravoidrecurse/recipe-sysroot-native/usr/bin/arm-oe-linux-gnueabi:/home/torres/Documenti/openpli-oe-core/build/tmp/work/vuzero4k-oe-linux-gnueabi/kodi-addon-pvr-mediaportal.tvserver/fetcheravoidrecurse-fetcheravoidrecurse/recipe-sysroot/usr/bin/crossscripts:/home/torres/Documenti/openpli-oe-core/build/tmp/work/vuzero4k-oe-linux-gnueabi/kodi-addon-pvr-mediaportal.tvserver/fetcheravoidrecurse-fetcheravoidrecurse/recipe-sysroot-native/usr/sbin:/home/torres/Documenti/openpli-oe-core/build/tmp/work/vuzero4k-oe-linux-gnueabi/kodi-addon-pvr-mediaportal.tvserver/fetcheravoidrecurse-fetcheravoidrecurse/recipe-sysroot-native/usr/bin:/home/torres/Documenti/openpli-oe-core/build/tmp/work/vuzero4k-oe-linux-gnueabi/kodi-addon-pvr-mediaportal.tvserver/fetcheravoidrecurse-fetcheravoidrecurse/recipe-sysroot-native/sbin:/home/torres/Documenti/openpli-oe-core/build/tmp/work/vuzero4k-oe-linux-gnueabi/kodi-addon-pvr-mediaportal.tvserver/fetcheravoidrecurse-fetcheravoidrecurse/recipe-sysroot-native/bin:/home/torres/Documenti/openpli-oe-core/bitbake/bin:/home/torres/Documenti/openpli-oe-core/build/tmp/hosttools"; export HOME="/home/torres"; git -c core.fsyncobjectfiles=0 ls-remote https://github.com/k...al.tvserver.git  failed with exit code 128, output:
fatal: unable to access 'https://github.com/k...l.tvserver.git/': Error in the HTTP2 framing layer



Summary: There were 4 WARNING messages shown.
Summary: There was 1 ERROR message shown, returning a non-zero exit code.
make: *** [Makefile:135: feed] Errore 1
torres@torres-Nitro-AN517-54:~/Documenti/openpli-oe-core$

 



Re: Error beim bauen vom Vu+ Solose Image. #196 torres

  • Senior Member
  • 147 posts

0
Neutral

Posted 14 October 2023 - 10:43

left again thanks anyway



Re: Error beim bauen vom Vu+ Solose Image. #197 WanWizard

  • PLi® Core member
  • 70,764 posts

+1,830
Excellent

Posted 14 October 2023 - 12:31

Is a github problem:

fatal: unable to access 'https://github.com/k...l.tvserver.git/': Error in the HTTP2 framing layer 

 


Currently in use: VU+ Duo 4K (2xFBC S2), VU+ Solo 4K (1xFBC S2), uClan Usytm 4K Ultimate (S2+T2), Octagon SF8008 (S2+T2), Zgemma H9.2H (S2+T2)

Due to my bad health, I will not be very active at times and may be slow to respond. I will not read the forum or PM on a regular basis.

Many answers to your question can be found in our new and improved wiki.


Re: Error beim bauen vom Vu+ Solose Image. #198 torres

  • Senior Member
  • 147 posts

0
Neutral

Posted 14 October 2023 - 14:48

 

Is a github problem:

fatal: unable to access 'https://github.com/k...l.tvserver.git/': Error in the HTTP2 framing layer 

Thanks WanWizard and it's back up and running thank you very much



Re: Error beim bauen vom Vu+ Solose Image. #199 WanWizard

  • PLi® Core member
  • 70,764 posts

+1,830
Excellent

Posted 14 October 2023 - 15:23

Hopefully it stays this way, it's been hit and miss for at least the last 24 hours now...


Currently in use: VU+ Duo 4K (2xFBC S2), VU+ Solo 4K (1xFBC S2), uClan Usytm 4K Ultimate (S2+T2), Octagon SF8008 (S2+T2), Zgemma H9.2H (S2+T2)

Due to my bad health, I will not be very active at times and may be slow to respond. I will not read the forum or PM on a regular basis.

Many answers to your question can be found in our new and improved wiki.


Re: Error beim bauen vom Vu+ Solose Image. #200 torres

  • Senior Member
  • 147 posts

0
Neutral

Posted 24 October 2023 - 04:23

Good morning I'm trying to compile an image for Zgemma-h9 with version 8.3 and it's giving me this error with the other Zgemmas, not just this one

 

 

torres@torres-Nitro-AN517-54:~/openpli-oe-core$ MACHINE=h9 make image
Building image for h9
Parsing recipes: 100% |##########################################| Time: 0:00:31
Parsing of 3489 .bb files complete (0 cached, 3489 parsed). 4705 targets, 729 skipped, 0 masked, 0 errors.
NOTE: Resolving any missing task queue dependencies

Build Configuration:
BB_VERSION           = "1.44.0"
BUILD_SYS            = "x86_64-linux"
NATIVELSBSTRING      = "ubuntu-20.04"
TARGET_SYS           = "arm-oe-linux-gnueabi"
MACHINE              = "h9"
DISTRO               = "openpli"
DISTRO_VERSION       = "Team"
TUNE_FEATURES        = "arm vfp cortexa15 neon vfpv4 callconvention-hard"
TARGET_FPU           = "hard"
meta-local           = "release-8.3:5f7ac113cd2241d86b141be816525a50df0ac479"
meta-oe              
meta-filesystems     
meta-multimedia      
meta-networking      
meta-python          
meta-webserver       = "HEAD:2b5dd1eb81cd08bc065bc76125f2856e9383e98b"
meta                 = "HEAD:db8ceed8f2eca92a4cffe8295481d8041281fdd0"
meta-openpli         = "release-8.3:5f7ac113cd2241d86b141be816525a50df0ac479"
meta-dream           = "HEAD:ee521e211359ff0a1c96aba732d341c8c7542795"
meta-vuplus          = "HEAD:9e5d440838e4c3c832004818cfc8f782c65eb572"
meta-xsarius.pli5    = "HEAD:ea4273ad9c29114e6725e7a9ed4922ff15a54342"
meta-qviart          = "HEAD:be4807af86702d1d5c9ada4f5cb47690a8c70dcf"
meta-xp              = "HEAD:587dcae4d5c6d3803323a454db9251d921864512"
meta-xtrend          = "HEAD:d66a8ecbcb131dc40bd19e2f6e9e3d4504d0bd40"
meta-formuler        = "HEAD:e10f6325c76b5ad978174f4ea93170422f633398"
meta-gfutures        = "HEAD:24fa1d02ede19b0b251704aecef857bfe680d606"
meta-xpeedc          = "HEAD:f93a07510cc3afddeebe5d35cc161eaa7671c906"
meta-zgemma          = "HEAD:23e495fa4390e0d88dc74ce87f068450daa540de"
meta-edision         = "HEAD:5ad1144a3c37b570362cac6b375ca4c75c4720a0"
meta-miraclebox      = "HEAD:4334a113eda6436cf52b65f582e773048b12783e"
meta-spycat          = "HEAD:ecab893a602151d8835df1d4fc87644612c4d1af"
meta-gi              = "HEAD:7cd4ea756d90d088ecfe0338c7a578c07c1911d1"
meta-sab             = "HEAD:4dbf027ebf93c3672a5fcce101e000ebc95dc778"
meta-gigablue        = "HEAD:078e3660e210dc318148199ccb312a2327727c2b"
meta-amiko           = "HEAD:6a1f1b759adcdf473904d6175a4a6c4ac8d37c30"
meta-axasuhd         = "HEAD:79fe52058ff4f43d28e9ca9c7b75df1f6c377d48"
meta-maxytec         = "HEAD:542bc919502138cc55d560b6bdca16e911f41c84"
meta-octagon         = "HEAD:2cf04358ea1119a554e405378cacc17aca07a4bf"
meta-uclan           = "HEAD:b75250b4399eb422e2302502d0b76bcb35739b22"
meta-abcom           = "HEAD:93e47d4291ecd57ca47d5f3f287115e4a9085323"
meta-qt5             = "HEAD:91e6e3b1f5aebd17f895caac3dee32a14630da99"

Initialising tasks: 100% |#######################################| Time: 0:00:03
Sstate summary: Wanted 363 Found 282 Missed 81 Current 1640 (77% match, 95% complete)
NOTE: Executing Tasks
NOTE: Setscene tasks completed
ERROR: linux-zgemma-4.4.35-.9 do_compile: oe_runmake failed
ERROR: linux-zgemma-4.4.35-.9 do_compile: Execution of '/home/torres/openpli-oe-core/build/tmp/work/h9-oe-linux-gnueabi/linux-zgemma/4.4.35-.9/temp/run.do_compile.343803' failed with exit code 1:
  CHK     include/config/kernel.release
  GEN     ./Makefile
  CHK     include/generated/uapi/linux/version.h
  CHK     include/generated/utsrelease.h
  Using /home/torres/openpli-oe-core/build/tmp/work-shared/h9/kernel-source as source for kernel
  HOSTLD  scripts/dtc/dtc
/home/torres/openpli-oe-core/build/tmp/hosttools/ld: scripts/dtc/dtc-parser.tab.o:(.bss+0x10): multiple definition of `yylloc'; scripts/dtc/dtc-lexer.lex.o:(.bss+0x0): first defined here
collect2: error: ld returned 1 exit status
make[4]: *** [scripts/Makefile.host:100: scripts/dtc/dtc] Error 1
make[3]: *** [/home/torres/openpli-oe-core/build/tmp/work-shared/h9/kernel-source/scripts/Makefile.build:403: scripts/dtc] Error 2
make[2]: *** [/home/torres/openpli-oe-core/build/tmp/work-shared/h9/kernel-source/Makefile:556: scripts] Error 2
make[1]: *** [Makefile:150: sub-make] Error 2
make: *** [Makefile:24: __sub-make] Error 2
WARNING: /home/torres/openpli-oe-core/build/tmp/work/h9-oe-linux-gnueabi/linux-zgemma/4.4.35-.9/temp/run.do_compile.343803:1 exit 1 from 'exit 1'

ERROR: Logfile of failure stored in: /home/torres/openpli-oe-core/build/tmp/work/h9-oe-linux-gnueabi/linux-zgemma/4.4.35-.9/temp/log.do_compile.343803
Log data follows:
| DEBUG: Executing shell function do_compile
| NOTE: make -j 16 HOSTCC=gcc  -isystem/home/torres/openpli-oe-core/build/tmp/work/h9-oe-linux-gnueabi/linux-zgemma/4.4.35-.9/recipe-sysroot-native/usr/include -march=native -O2 -pipe -L/home/torres/openpli-oe-core/build/tmp/work/h9-oe-linux-gnueabi/linux-zgemma/4.4.35-.9/recipe-sysroot-native/usr/lib                         -L/home/torres/openpli-oe-core/build/tmp/work/h9-oe-linux-gnueabi/linux-zgemma/4.4.35-.9/recipe-sysroot-native/lib                         -Wl,--enable-new-dtags                         -Wl,-rpath-link,/home/torres/openpli-oe-core/build/tmp/work/h9-oe-linux-gnueabi/linux-zgemma/4.4.35-.9/recipe-sysroot-native/usr/lib                         -Wl,-rpath-link,/home/torres/openpli-oe-core/build/tmp/work/h9-oe-linux-gnueabi/linux-zgemma/4.4.35-.9/recipe-sysroot-native/lib                         -Wl,-rpath,/home/torres/openpli-oe-core/build/tmp/work/h9-oe-linux-gnueabi/linux-zgemma/4.4.35-.9/recipe-sysroot-native/usr/lib                         -Wl,-rpath,/home/torres/openpli-oe-core/build/tmp/work/h9-oe-linux-gnueabi/linux-zgemma/4.4.35-.9/recipe-sysroot-native/lib                         -Wl,-O1 HOSTCPP=gcc  -E uImage CC=arm-oe-linux-gnueabi-gcc   -fuse-ld=bfd -fmacro-prefix-map=/home/torres/openpli-oe-core/build/tmp/work/h9-oe-linux-gnueabi/linux-zgemma/4.4.35-.9=/usr/src/debug/linux-zgemma/4.4.35-.9                      -fdebug-prefix-map=/home/torres/openpli-oe-core/build/tmp/work/h9-oe-linux-gnueabi/linux-zgemma/4.4.35-.9=/usr/src/debug/linux-zgemma/4.4.35-.9                      -fdebug-prefix-map=/home/torres/openpli-oe-core/build/tmp/work/h9-oe-linux-gnueabi/linux-zgemma/4.4.35-.9/recipe-sysroot=                      -fdebug-prefix-map=/home/torres/openpli-oe-core/build/tmp/work/h9-oe-linux-gnueabi/linux-zgemma/4.4.35-.9/recipe-sysroot-native=  -fdebug-prefix-map=/home/torres/openpli-oe-core/build/tmp/work-shared/h9/kernel-source=/usr/src/kernel   LD=arm-oe-linux-gnueabi-ld.bfd
|   CHK     include/config/kernel.release
|   GEN     ./Makefile
|   CHK     include/generated/uapi/linux/version.h
|   CHK     include/generated/utsrelease.h
|   Using /home/torres/openpli-oe-core/build/tmp/work-shared/h9/kernel-source as source for kernel
|   HOSTLD  scripts/dtc/dtc
| /home/torres/openpli-oe-core/build/tmp/hosttools/ld: scripts/dtc/dtc-parser.tab.o:(.bss+0x10): multiple definition of `yylloc'; scripts/dtc/dtc-lexer.lex.o:(.bss+0x0): first defined here
| collect2: error: ld returned 1 exit status
| make[4]: *** [scripts/Makefile.host:100: scripts/dtc/dtc] Error 1
| make[3]: *** [/home/torres/openpli-oe-core/build/tmp/work-shared/h9/kernel-source/scripts/Makefile.build:403: scripts/dtc] Error 2
| make[2]: *** [/home/torres/openpli-oe-core/build/tmp/work-shared/h9/kernel-source/Makefile:556: scripts] Error 2
| make[1]: *** [Makefile:150: sub-make] Error 2
| make: *** [Makefile:24: __sub-make] Error 2
| ERROR: oe_runmake failed
| WARNING: /home/torres/openpli-oe-core/build/tmp/work/h9-oe-linux-gnueabi/linux-zgemma/4.4.35-.9/temp/run.do_compile.343803:1 exit 1 from 'exit 1'
| ERROR: Execution of '/home/torres/openpli-oe-core/build/tmp/work/h9-oe-linux-gnueabi/linux-zgemma/4.4.35-.9/temp/run.do_compile.343803' failed with exit code 1:
|   CHK     include/config/kernel.release
|   GEN     ./Makefile
|   CHK     include/generated/uapi/linux/version.h
|   CHK     include/generated/utsrelease.h
|   Using /home/torres/openpli-oe-core/build/tmp/work-shared/h9/kernel-source as source for kernel
|   HOSTLD  scripts/dtc/dtc
| /home/torres/openpli-oe-core/build/tmp/hosttools/ld: scripts/dtc/dtc-parser.tab.o:(.bss+0x10): multiple definition of `yylloc'; scripts/dtc/dtc-lexer.lex.o:(.bss+0x0): first defined here
| collect2: error: ld returned 1 exit status
| make[4]: *** [scripts/Makefile.host:100: scripts/dtc/dtc] Error 1
| make[3]: *** [/home/torres/openpli-oe-core/build/tmp/work-shared/h9/kernel-source/scripts/Makefile.build:403: scripts/dtc] Error 2
| make[2]: *** [/home/torres/openpli-oe-core/build/tmp/work-shared/h9/kernel-source/Makefile:556: scripts] Error 2
| make[1]: *** [Makefile:150: sub-make] Error 2
| make: *** [Makefile:24: __sub-make] Error 2
| WARNING: /home/torres/openpli-oe-core/build/tmp/work/h9-oe-linux-gnueabi/linux-zgemma/4.4.35-.9/temp/run.do_compile.343803:1 exit 1 from 'exit 1'
|
ERROR: Task (/home/torres/openpli-oe-core/meta-zgemma/recipes-bsp/linux/linux-zgemma_4.4.35.bb:do_compile) failed with exit code '1'
NOTE: Tasks Summary: Attempted 3195 tasks of which 3191 didn't need to be rerun and 1 failed.

Summary: 1 task failed:
  /home/torres/openpli-oe-core/meta-zgemma/recipes-bsp/linux/linux-zgemma_4.4.35.bb:do_compile
Summary: There were 2 ERROR messages shown, returning a non-zero exit code.
make: *** [Makefile:130: image] Errore 1
torres@torres-Nitro-AN517-54:~/openpli-oe-core$


 




1 user(s) are reading this topic

0 members, 1 guests, 0 anonymous users