Jump to content


Photo

Can not write to USB HD


  • Please log in to reply
4 replies to this topic

#1 shy11

  • Senior Member
  • 48 posts

0
Neutral

Posted 14 April 2020 - 06:33

Hi There,

 

I need everyones help.

Recently I have chnaged my STB from DM800HD to Octagon SF8008.

I have connected Internal DM800HD Hard Disk to USB3 of Octagon in External HDD Enclouser.

 

I was able to write and read from this HDD after conenctiong to Octagon, how ever since last few days I can not write anything to it.

 

I have tried different images but issue remian same.

 

I can play movies, access the HDD in ftp. I have anoter SD card in sd card slot which works fine for Read Write

 

I have grabed follwing info of monut from terminal

 

Disk /dev/sdc: 298.9 GiB, 320072933376 bytes, 625142448 sectors    (Hard Disk)
Disk model: 00BEKT-75PVMT1
Units: sectors of 1 * 512 = 512 bytes
Sector size (logical/physical): 512 bytes / 512 bytes
I/O size (minimum/optimal): 512 bytes / 512 bytes
Disklabel type: dos
Disk identifier: 0x0919e154
 
Disk /dev/sda: 59.49 GiB, 63864569856 bytes, 124735488 sectors    (sd CARD)
Disk model: STORAGE DEVICE
Units: sectors of 1 * 512 = 512 bytes
Sector size (logical/physical): 512 bytes / 512 bytes
I/O size (minimum/optimal): 512 bytes / 512 bytes
Disklabel type: dos
Disk identifier: 0x29fc8ef0
 
/dev/sda1: UUID="25b6254f-8b80-4093-88d9-e470abab791d" BLOCK_SIZE="4096" TYPE="ext4" PARTUUID="29fc8ef0-01"
/dev/sdc1: LABEL="hdd" UUID="10cf7997-54c8-4bf1-9f40-51997452aac2" BLOCK_SIZE="4096" TYPE="ext3" PARTUUID="0919e154-01"
/dev/mmcblk0p3: SEC_TYPE="msdos" UUID="2B9B-CF4D" BLOCK_SIZE="512" TYPE="vfat"
/dev/mmcblk0p13: UUID="3de067cf-18c8-4c29-ba78-6499d003d3eb" BLOCK_SIZE="4096" TYPE="ext4"
 
dev/root on / type ext4 (rw,relatime,data=ordered)
devtmpfs on /dev type devtmpfs (rw,relatime,size=469344k,nr_inodes=117336,mode=755)
proc on /proc type proc (rw,relatime)
sysfs on /sys type sysfs (rw,relatime)
debugfs on /sys/kernel/debug type debugfs (rw,relatime)
configfs on /sys/kernel/config type configfs (rw,relatime)
tmpfs on /media type tmpfs (rw,relatime,size=64k,nr_inodes=117405)
tmpfs on /var/volatile type tmpfs (rw,relatime,size=469620k,nr_inodes=117405)
/dev/sda1 on /media/hdd type ext4 (rw,relatime,data=ordered)
/dev/sdc1 on /media/usb type ext4 (rw,relatime,data=ordered)
/dev/mmcblk0p3 on /boot type vfat (rw,relatime,fmask=0022,dmask=0022,codepage=437,iocharset=iso8859-1,shortname=mixed,errors=remount-ro)
devpts on /dev/pts type devpts (rw,relatime,gid=5,mode=620)
fusectl on /sys/fs/fuse/connections type fusectl (rw,relatime)
/etc/auto.network on /media/autofs type autofs (rw,relatime,fd=6,pgrp=2010,timeout=5,minproto=5,maxproto=5,indirect)

 

 



Re: Can not write to USB HD #2 littlesat

  • PLi® Core member
  • 57,456 posts

+708
Excellent

Posted 14 April 2020 - 06:41

Something corrupted on the disk that blocks the writing...

WaveFrontier 28.2E | 23.5E | 19.2E | 16E | 13E | 10/9E | 7E | 5E | 1W | 4/5W | 15W


Re: Can not write to USB HD #3 shy11

  • Senior Member
  • 48 posts

0
Neutral

Posted 14 April 2020 - 09:17

Something corrupted on the disk that blocks the writing...

any suggestion how to fix witout loosing 250GB data?



Re: Can not write to USB HD #4 WanWizard

  • PLi® Core member
  • 70,891 posts

+1,833
Excellent

Posted 14 April 2020 - 11:17

What is "BLOCK_SIZE" doing in your fstab? Where does it come from?


Currently in use: VU+ Duo 4K (2xFBC S2), VU+ Solo 4K (1xFBC S2), uClan Usytm 4K Ultimate (S2+T2), Octagon SF8008 (S2+T2), Zgemma H9.2H (S2+T2)

Due to my bad health, I will not be very active at times and may be slow to respond. I will not read the forum or PM on a regular basis.

Many answers to your question can be found in our new and improved wiki.


Re: Can not write to USB HD #5 betacentauri

  • PLi® Core member
  • 7,185 posts

+323
Excellent

Posted 14 April 2020 - 18:12

Are there any errors visible in dmesg output?

 

According to your info the harddisk is mounted to /media/usb. What happens when you do this in telnet?

touch /media/usb/test.txt

Do you see the content of the hdd in telnet?

ls -la /media/usb

 

 


Xtrend ET-9200, ET-8000, ET-10000, OpenPliPC on Ubuntu 12.04


3 user(s) are reading this topic

0 members, 3 guests, 0 anonymous users