67 replies to this topic

[betacentauri]

And what is the problem?
/tmp is a link to /var/volatile/tmp and so all data in /tmp lies in a tmpfs. At least it is like this in current images since ages. Didn’t check Zeus/dunfell, but I don’t know a reason why to change it.

[foxbob]

I kind of have no problems. I show command output. And this is command output after this https://github.com/w...ts/zeus-fixeudv

/dev/sda   /dev/sda1
root@et1x000:~# df
Filesystem           1K-blocks      Used Available Use% Mounted on
/dev/root              3659692    413876   3040200  12% /
devtmpfs                148356         4    148352   0% /dev
tmpfs                       64         0        64   0% /media
tmpfs                   156696       200    156496   0% /run
tmpfs                   156696     10544    146152   7% /var/volatile
/dev/sda1            960384328 573051648 338478256  63% /media/hdd
root@et1x000:~# mount
/dev/root on / type ext4 (rw,relatime,data=ordered)
devtmpfs on /dev type devtmpfs (rw,relatime,size=148356k,nr_inodes=37089,mode=755)
proc on /proc type proc (rw,relatime)
sysfs on /sys type sysfs (rw,relatime)
debugfs on /sys/kernel/debug type debugfs (rw,relatime)
tmpfs on /media type tmpfs (rw,relatime,size=64k)
fusectl on /sys/fs/fuse/connections type fusectl (rw,relatime)
tmpfs on /run type tmpfs (rw,nosuid,nodev,mode=755)
tmpfs on /var/volatile type tmpfs (rw,relatime)
/dev/sda1 on /media/hdd type ext4 (rw,relatime,data=ordered)
devpts on /dev/pts type devpts (rw,relatime,gid=5,mode=620)
nfsd on /proc/fs/nfsd type nfsd (rw,relatime)
root@et1x000:~# dmesg
Booting Linux on physical CPU 0x0
Linux version 4.1.37 (oe-user@oe-host) (gcc version 9.2.0 (GCC) ) #1 SMP Thu May 7 03:00:42 UTC 2020
CPU: ARMv7 Processor [420f00f3] revision 3 (ARMv7), cr=30c5387d
CPU: PIPT / VIPT nonaliasing data cache, PIPT instruction cache
Machine model: ET1x000_EMMC_DDR3_NOAVS
moving dtb from 0x0000000007628000 to 0x0000000000980684
bmem: Reserved 700 MiB at 0x0000000014400000
cma: Reserved 16 MiB at 0x0000000012c00000
Forcing write-allocate cache policy for SMP
Memory policy: Data cache writealloc
On node 0 totalpages: 262144
  DMA zone: 632 pages used for memmap
  DMA zone: 0 pages reserved
  DMA zone: 80896 pages, LIFO batch:15
  HighMem zone: 181248 pages, LIFO batch:31
PERCPU: Embedded 12 pages/cpu @d23ae000 s16396 r8192 d24564 u49152
pcpu-alloc: s16396 r8192 d24564 u49152 alloc=12*4096
pcpu-alloc: [0] 0 [0] 1 
Built 1 zonelists in Zone order, mobility grouping on.  Total pages: 261512
Kernel command line: root=/dev/mmcblk0p4 rootwait rw vmalloc=692m bmem=700m@324m
PID hash table entries: 2048 (order: 1, 8192 bytes)
Dentry cache hash table entries: 65536 (order: 6, 262144 bytes)
Inode-cache hash table entries: 32768 (order: 5, 131072 bytes)
Memory: 296712K/1048576K available (6789K kernel code, 265K rwdata, 2144K rodata, 296K init, 189K bss, 735480K reserved, 16384K cma-reserved, 8188K highmem)
Virtual kernel memory layout:
    vector  : 0xffff0000 - 0xffff1000   (   4 kB)
    fixmap  : 0xffc00000 - 0xfff00000   (3072 kB)
    vmalloc : 0xd4000000 - 0xff000000   ( 688 MB)
    lowmem  : 0xc0000000 - 0xd3c00000   ( 316 MB)
    pkmap   : 0xbfe00000 - 0xc0000000   (   2 MB)
    modules : 0xbf000000 - 0xbfe00000   (  14 MB)
      .text : 0xc0008000 - 0xc08c1b04   (8935 kB)
      .init : 0xc08c2000 - 0xc090c000   ( 296 kB)
      .data : 0xc090c000 - 0xc094e5d0   ( 266 kB)
       .bss : 0xc0951000 - 0xc0980684   ( 190 kB)
Hierarchical RCU implementation.
        RCU restricting CPUs from NR_CPUS=4 to nr_cpu_ids=2.
RCU: Adjusting geometry for rcu_fanout_leaf=16, nr_cpu_ids=2
NR_IRQS:16 nr_irqs:16 16
irq_brcmstb_l2: registered L2 intc (mem: 0xd4002000, parent irq: 93)
irq_brcmstb_l2: registered L2 intc (mem: 0xd4008000, parent irq: 64)
irq_brcmstb_l2: registered L2 intc (mem: 0xd400a640, parent irq: 95)
irq_brcmstb_l2: registered L2 intc (mem: 0xd400c200, parent irq: 58)
irq_bcm7120_l2: registered BCM7120 L2 intc (mem: 0xfc40a700, parent IRQ(s): 2)
irq_bcm7120_l2: registered BCM7120 L2 intc (mem: 0xd400e380, parent IRQ(s): 3)
MCP: Enabling write pairing
Architected cp15 timer(s) running at 27.00MHz (virt).
clocksource arch_sys_counter: mask: 0xffffffffffffff max_cycles: 0x63a1e71a3, max_idle_ns: 440795203123 ns
sched_clock: 56 bits at 27MHz, resolution 37ns, wraps every 4398046511093ns
Switching to timer-based delay loop, resolution 37ns
Console: colour dummy device 80x30
Calibrating delay loop (skipped), value calculated using timer frequency.. 54.00 BogoMIPS (lpj=27000)
pid_max: default: 32768 minimum: 301
Mount-cache hash table entries: 1024 (order: 0, 4096 bytes)
Mountpoint-cache hash table entries: 1024 (order: 0, 4096 bytes)
CPU: Testing write buffer coherency: ok
CPU0: update cpu_capacity 1024
CPU0: thread -1, cpu 0, socket 0, mpidr 80000000
Setting up static identity map for 0x8440 - 0x8498
CPU1: update cpu_capacity 1024
CPU1: thread -1, cpu 1, socket 0, mpidr 80000001
Brought up 2 CPUs
SMP: Total of 2 processors activated (108.00 BogoMIPS).
CPU: All CPU(s) started in SVC mode.
devtmpfs: initialized
VFP support v0.3: implementor 42 architecture 4 part 00 variant 0 rev 0
clocksource jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 1911260446275000 ns
NET: Registered protocol family 16
DMA: preallocated 256 KiB pool for atomic coherent allocations
cpuidle: using governor ladder
cpuidle: using governor menu
hw-breakpoint: found 5 (+1 reserved) breakpoint and 4 watchpoint registers.
hw-breakpoint: maximum watchpoint size is 8 bytes.
Broadcom Brahma-B15 readahead cache at: 0xd410e478
vgaarb: loaded
SCSI subsystem initialized
libata version 3.00 loaded.
usbcore: registered new interface driver usbfs
usbcore: registered new interface driver hub
usbcore: registered new device driver usb
media: Linux media interface: v0.10
Linux video capture interface: v2.00
Advanced Linux Sound Architecture Driver Initialized.
Bluetooth: Core ver 2.20
NET: Registered protocol family 31
Bluetooth: HCI device and connection manager initialized
Bluetooth: HCI socket layer initialized
Bluetooth: L2CAP socket layer initialized
Bluetooth: SCO socket layer initialized
Switched to clocksource arch_sys_counter
FS-Cache: Loaded
thermal thermal_zone0: failed to read out thermal zone (-22)
NET: Registered protocol family 2
TCP established hash table entries: 4096 (order: 2, 16384 bytes)
TCP bind hash table entries: 4096 (order: 3, 32768 bytes)
TCP: Hash tables configured (established 4096 bind 4096)
UDP hash table entries: 256 (order: 1, 8192 bytes)
UDP-Lite hash table entries: 256 (order: 1, 8192 bytes)
NET: Registered protocol family 1
RPC: Registered named UNIX socket transport module.
RPC: Registered udp transport module.
RPC: Registered tcp transport module.
RPC: Registered tcp NFSv4.1 backchannel transport module.
PCI: CLS 0 bytes, default 64
CPU PMU: Failed to parse /pmu/interrupt-affinity[0]
hw perfevents: enabled with armv7_cortex_a15 PMU driver, 7 counters available
futex hash table entries: 512 (order: 3, 32768 bytes)
NFS: Registering the id_resolver key type
Key type id_resolver registered
Key type id_legacy registered
nfs4filelayout_init: NFSv4 File Layout Driver Registering...
Installing knfsd (copyright (C) 1996 okir@monad.swb.de).
fuse init (API version 7.23)
bounce: pool size: 64 pages
Block layer SCSI generic (bsg) driver version 0.4 loaded (major 252)
io scheduler noop registered
io scheduler deadline registered
io scheduler cfq registered (default)
brcm-gisb-arb f0400000.gisb-arb: registered mem: d4134000, irqs: 261, 262
brcm-usb-phy f0470200.usb-phy: USB3.0 clock not found in Device Tree
brcmstb-sata-phy f0458100.sata_phy: registered 2 port(s)
brcm-pci f0460000.pcie: adjusting to legacy (broken) pcie DT
brcm-pci f0460000.pcie: cannot get msi intr; MSI disabled
brcm-pci f0460000.pcie: link down
brcm-waketimer f0417580.waketimer: rtc core: registered brcmstb-waketmr as rtc0
brcm-waketimer f0417580.waketimer: registered, with irq 263
Serial: 8250/16550 driver, 1 ports, IRQ sharing disabled
console [ttyS0] disabled
f040a900.serial: ttyS0 at MMIO 0xf040a900 (irq = 107, base_baud = 5062500) is a 16550A
console [ttyS0] enabled
of_serial: probe of f040a940.serial failed with error -28
of_serial: probe of f040a980.serial failed with error -28
[drm] Initialized drm 1.1.0 20060810
brd: module loaded
loop: module loaded
brcm-ahci f045a000.sata: masking port_map 0x3 -> 0x3
brcm-ahci f045a000.sata: SSS flag set, parallel bus scan disabled
brcm-ahci f045a000.sata: AHCI 0001.0300 32 slots 2 ports 6 Gbps 0x3 impl platform mode
brcm-ahci f045a000.sata: flags: 64bit ncq sntf stag pm clo pmp slum part 
scsi host0: brcm-ahci
scsi host1: brcm-ahci
ata1: SATA max UDMA/133 mmio [mem 0xf045a000-0xf045aa9b] port 0x100 irq 91
ata2: SATA max UDMA/133 mmio [mem 0xf045a000-0xf045aa9b] port 0x180 irq 91
brcm-ahci f045a000.sata: Broadcom AHCI SATA3 registered
brcmstb_qspi f03e3400.spi: using bspi-mspi mode
m25p80 spi32766.0: found mx25l6405d, expected m25p80
m25p80 spi32766.0: mx25l6405d (8192 Kbytes)
6 ofpart partitions found on MTD device spi32766.0
Creating 6 MTD partitions on "spi32766.0":
0x000000000000-0x000000200000 : "flash0.bolt"
0x000000200000-0x000000240000 : "flash0.macadr"
0x000000240000-0x000000280000 : "flash0.nvram"
0x000000280000-0x000000300000 : "flash0.devtree"
0x000000300000-0x000000800000 : "flash0.avail0"
0x000000000000-0x000000800000 : "flash0"
libphy: Fixed MDIO Bus: probed
bcmgenet f0b00000.ethernet: GENET 4.5 EPHY: 0x1001
bcmgenet f0b00000.ethernet: failed to get enet-mux clock
libphy: bcmgenet MII bus: probed
usbcore: registered new interface driver r8152
hso: /home/foxbob/gi/openpli-oe-core/build/tmp/work-shared/et1x000/kernel-source/drivers/net/usb/hso.c: Option Wireless
ata1: SATA link down (SStatus 0 SControl 300)
usbcore: registered new interface driver hso
usbcore: registered new interface driver cdc_ether
usbcore: registered new interface driver ipheth
xhci-brcm: xHCI BRCM driver
xhci-brcm f0471000.xhci_v2: xHCI Host Controller
xhci-brcm f0471000.xhci_v2: new USB bus registered, assigned bus number 1
xhci-brcm f0471000.xhci_v2: hcc params 0x0250f17d hci version 0x100 quirks 0x00010090
xhci-brcm f0471000.xhci_v2: irq 149, io mem 0xf0471000
hub 1-0:1.0: USB hub found
hub 1-0:1.0: config failed, hub doesn't have any ports! (err -19)
xhci-brcm f0471000.xhci_v2: xHCI Host Controller
xhci-brcm f0471000.xhci_v2: new USB bus registered, assigned bus number 2
usb usb2: We don't know the algorithms for LPM for this host, disabling LPM.
hub 2-0:1.0: USB hub found
hub 2-0:1.0: 2 ports detected
ehci-brcm: EHCI BRCM driver
ehci-brcm f0470300.ehci_v2: EHCI Host Controller
ehci-brcm f0470300.ehci_v2: new USB bus registered, assigned bus number 3
ata2: SATA link down (SStatus 0 SControl 300)
ehci-brcm f0470300.ehci_v2: irq 145, io mem 0xf0470300
ehci-brcm f0470300.ehci_v2: USB 2.0 started, EHCI 1.00
hub 3-0:1.0: USB hub found
hub 3-0:1.0: 1 port detected
ehci-brcm f0470500.ehci_v2: EHCI Host Controller
ehci-brcm f0470500.ehci_v2: new USB bus registered, assigned bus number 4
ehci-brcm f0470500.ehci_v2: irq 146, io mem 0xf0470500
ehci-brcm f0470500.ehci_v2: USB 2.0 started, EHCI 1.00
hub 4-0:1.0: USB hub found
hub 4-0:1.0: 1 port detected
ohci-brcm: OHCI BRCM driver
ohci-brcm f0470400.ohci_v2: BRCM OHCI controller
ohci-brcm f0470400.ohci_v2: new USB bus registered, assigned bus number 5
ohci-brcm f0470400.ohci_v2: irq 147, io mem 0xf0470400
hub 5-0:1.0: USB hub found
hub 5-0:1.0: 1 port detected
ohci-brcm f0470600.ohci_v2: BRCM OHCI controller
ohci-brcm f0470600.ohci_v2: new USB bus registered, assigned bus number 6
ohci-brcm f0470600.ohci_v2: irq 148, io mem 0xf0470600
hub 6-0:1.0: USB hub found
hub 6-0:1.0: 1 port detected
ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
ehci-pci: EHCI PCI platform driver
ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
ohci-pci: OHCI PCI platform driver
usbcore: registered new interface driver cdc_acm
cdc_acm: USB Abstract Control Model driver for USB modems and ISDN adapters
usbcore: registered new interface driver cdc_wdm
usbcore: registered new interface driver usb-storage
mousedev: PS/2 mouse device common for all mice
usbcore: registered new interface driver appletouch
usbcore: registered new interface driver bcm5974
usbcore: registered new interface driver synaptics_usb
i2c /dev entries driver
brcmstb_thermal f04d1500.thermal: registered AVS TMON of-sensor driver
usbcore: registered new interface driver btusb
sdhci: Secure Digital Host Controller Interface driver
sdhci: Copyright(c) Pierre Ossman
sdhci-pltfm: SDHCI platform and OF driver helper
sdhci-brcmstb f03e0000.sdhci: No vmmc regulator found
sdhci-brcmstb f03e0000.sdhci: No vqmmc regulator found
mmc0: SDHCI controller on f03e0000.sdhci [f03e0000.sdhci] using ADMA
sdhci-brcmstb f03e0200.sdhci: No vmmc regulator found
sdhci-brcmstb f03e0200.sdhci: No vqmmc regulator found
mmc1: SDHCI controller on f03e0200.sdhci [f03e0200.sdhci] using ADMA
hidraw: raw HID events driver (C) Jiri Kosina
usbcore: registered new interface driver usbhid
usb 4-1: new high-speed USB device number 2 using ehci-brcm
usbhid: USB HID core driver
Initializing XFRM netlink socket
NET: Registered protocol family 17
NET: Registered protocol family 15
Key type dns_resolver registered
Registering SWP/SWPB emulation handler
brcm-waketimer f0417580.waketimer: setting system clock to 1970-01-01 00:00:04 UTC (4)
ALSA device list:
  No soundcards found.
Waiting for root device /dev/mmcblk0p4...
mmc1: MAN_BKOPS_EN bit is not set
mmc1: new high speed MMC card at address 0001
mmcblk0: mmc1:0001 4FPD3R 3.64 GiB 
mmcblk0boot0: mmc1:0001 4FPD3R partition 1 4.00 MiB
mmcblk0boot1: mmc1:0001 4FPD3R partition 2 4.00 MiB
usb-storage 4-1:1.0: USB Mass Storage device detected
usb-storage 4-1:1.0: Quirks match for vid 152d pid 2329: 8020
scsi host2: usb-storage 4-1:1.0
mmcblk0rpmb: mmc1:0001 4FPD3R partition 3 512 KiB
 mmcblk0: p1 p2 p3 p4
EXT4-fs (mmcblk0p4): mounted filesystem with ordered data mode. Opts: (null)
VFS: Mounted root (ext4 filesystem) on device 179:4.
devtmpfs: mounted
Freeing unused kernel memory: 296K (c08c2000 - c090c000)
udevd[908]: starting version 3.2.9
random: udevd urandom read with 9 bits of entropy available
udevd[909]: starting eudev-3.2.9
scsi 2:0:0:0: Direct-Access     SAMSUNG  HD105SI          1AJ1 PQ: 0 ANSI: 2 CCS
sd 2:0:0:0: [sda] 1953525168 512-byte logical blocks: (1.00 TB/932 GiB)
sd 2:0:0:0: [sda] Write Protect is off
sd 2:0:0:0: [sda] Mode Sense: 28 00 00 00
sd 2:0:0:0: Attached scsi generic sg0 type 0
sd 2:0:0:0: [sda] No Caching mode page found
sd 2:0:0:0: [sda] Assuming drive cache: write through
 sda: sda1
sd 2:0:0:0: [sda] Attached SCSI disk
EXT4-fs (sda1): warning: mounting fs with errors, running e2fsck is recommended
EXT4-fs (sda1): mounted filesystem with ordered data mode. Opts: (null)
DVB: registering new adapter (et11000)
platform et11000.0: DVB: registering adapter 0 frontend 0 (AVL6211)...
input: dreambox remote control (native) as /devices/virtual/input/input0
EXT4-fs (mmcblk0p4): re-mounted. Opts: data=ordered
f0b00000.etherne:01: Broadcom BCM7439 (2) PHY revision: 0x10, patch: 1
bcmgenet f0b00000.ethernet: configuring instance for internal PHY
random: nonblocking pool is initialized
bcmgenet f0b00000.ethernet eth0: Link is Down
NET: Registered protocol family 10
IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready
bcmgenet f0b00000.ethernet eth0: Link is Up - 100Mbps/Full - flow control rx/tx
IPv6: ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready
UDF-fs: warning (device mmcblk0p1): udf_fill_super: No partition found (2)
UDF-fs: warning (device mmcblk0p3): udf_fill_super: No partition found (2)
UDF-fs: warning (device mmcblk0p1): udf_fill_super: No partition found (2)
UDF-fs: warning (device mmcblk0p3): udf_fill_super: No partition found (2)
echo (2083): drop_caches: 1
UDF-fs: warning (device mmcblk0p1): udf_fill_super: No partition found (2)
UDF-fs: warning (device mmcblk0p3): udf_fill_super: No partition found (2)
root@et1x000:~# 

[WTE]

I saw that the Thud branch was now in develop. Will this mean that 7.3 is with Thud?

Then you will have branch rc based on it seems Zeus which will been 8.0 rc?

 

For develop branch can someone please cherrypick the follow commit: https://github.com/O...263d2f44a995816

Edited by WTE, 31 May 2020 - 19:11.

[WanWizard]

No.

 

There will not be any OE changes within a major release. RC has been branched off before the merge of Thud, and therefore 7.3 will remain based on Pyro.

 

We're going to test with Thud now, which we expect will go smoothly. After that we'll merge Zeus as well, and will base OpenPLi 8 on a develop with Zeus.

[WTE]

No.

 

There will not be any OE changes within a major release. RC has been branched off before the merge of Thud, and therefore 7.3 will remain based on Pyro.

 

We're going to test with Thud now, which we expect will go smoothly. After that we'll merge Zeus as well, and will base OpenPLi 8 on a develop with Zeus.

ok  tnx for explain , then I will keep using zeus branch

[Erik Slagter]

Please note that the zeus branch will be getting rebased just as often as it did, so any local changes will be lost.

[littlesat]

Step-by-step...

 

And I was already a bit afraid we'll skip 7.3... I missed it was rebased...

Edited by littlesat, 1 June 2020 - 11:42.

[A.A.]

I see, so the bleeding-edge for zeus  is https://github.com/w...tree/zeus-eudev as of now.

I can live with it Thanks WTE

 

About OpenPLi 8.0 I dare to insist that the timing would suggest to base it on dunfell.

 

Please read https://www.yoctopro....html#migration #4.17 about changes in dunfell.

Outstanding is the removal of python2 from oe-core, otherwise the big fishes are in 3.0 (#4.16)

 

While it is clear that the main developers here don't care about Kodi, as said before I'm only interested in kodi_18 at the moment.

This recipe could work on any 7.x release: are there plans to backport kodi_18 from zeus to 7.3?

 

If not I'll skip totally zeus and move on to dunfell for testing it further.

 

 

Regards

A.A.

[betacentauri]

Removal of python2 is a big problem for us. e2 relies on python2. And this can't be changed easily. And if we would migrate to python 3, several(most) plugins won't work any longer.

[WTE]

Removal of python2 is a big problem for us. e2 relies on python2. And this can't be changed easily. And if we would migrate to python 3, several(most) plugins won't work any longer.

Just add meta-python2 and you can use dunfell without a big issue

 

However start with zeus is fine by me. Kodi18 and Chromium/ QT5 works perfect on it

Edited by WTE, 1 June 2020 - 13:31.

[A.A.]

@betacentauri

heh, it's not so bad,  the changelog says

 

"Build is now Python 2-free; python 2 moved out to meta-python2"

 

http://layers.openem...r/meta-python2/

 

Plus there are other non-core python recipes in meta-openembedded.

Ah, where possible I'd reduce the number of python recipes in meta-openpli...

 

My 2 cents

A.A.

[foxbob]

Kodi18 works on my receiver on dunfell branch.Webkit-classic also works.qtwebbrowser builds and works,but it needs its own application to run.qtwebkit builds and not work.Most likely this is only on my receiver.

[XRayhTec]

Here on zgemma h9combo Kodi 18.7 running well on sumo and zeus branch.
Qt 5.12.8 on zeus branch builds but qthbbtv is not running with it, so for now I keep sumo with QT5.8.
Regards,

[Erik Slagter]

And I was already a bit afraid we'll skip 7.3... I missed it was rebased...

 

It is not rebased, it is continuously being rebased. Every day it can be a different version.

 

It has nothing to do with the 7.x releases anyway.

[foxbob]

I put together a new one for my receiver.Collected without errors.QTHBBTV does not work.There is no plugin when I press the blue button.The stalker portal found one that started on the start page,but after a few seconds it closes without a crash.

 

[eDVBServicePMTHandler] AITready
[eDVBServicePMTHandler] Section Length : 1007, Total Section Length : 1010
[eDVBServicePMTHandler] found applicaions ids >> pid : 0, orgid : 19, appid : 1
[eDVBServicePMTHandler] section_number 1 > 0
[eDVBServicePMTHandler] last_section_number 1 > section_number 0
[eDVBServicePMTHandler] Save Data Len : [1010]
[eDVBDemux] open demux /dev/dvb/adapter0/demux0
[eDVBSectionReader] DMX_SET_FILTER pid=5172
[eDVBServicePMTHandler] found applicaions ids >> pid : 0, orgid : 19, appid : 2
[eDVBServicePMTHandler] found applicaions ids >> pid : 0, orgid : 19, appid : 4
[eDVBDemux] open demux /dev/dvb/adapter0/demux0
[eDVBSectionReader] DMX_SET_FILTER pid=5172
[eDVBServicePMTHandler] found applicaions ids >> pid : 0, orgid : 19, appid : 5
[eDVBServicePMTHandler] found applicaions ids >> pid : 0, orgid : 19, appid : 20
[eDVBServicePMTHandler] found applicaions ids >> pid : 0, orgid : 19, appid : 3
[eDVBServicePMTHandler] found applicaions ids >> pid : 0, orgid : 19, appid : 35
[eDVBServicePMTHandler] found applicaions ids >> pid : 0, orgid : 19, appid : 42
[eDVBServicePMTHandler] found applicaions ids >> pid : 0, orgid : 19, appid : 66
[eDVBServicePMTHandler] found applicaions ids >> pid : 0, orgid : 19, appid : 168
[eDVBServicePMTHandler] found applicaions ids >> pid : 0, orgid : 19, appid : 39
[eDVBServicePMTHandler] Section Length : 265, Total Section Length : 268
[eDVBServicePMTHandler] found applicaions ids >> pid : 0, orgid : 19, appid : 192
[eDVBServicePMTHandler] found applicaions ids >> pid : 0, orgid : 19, appid : 155
[eDVBServicePMTHandler] found applicaions ids >> pid : 0, orgid : 19, appid : 157
[eDVBServicePMTHandler] Found : control[1], name[HBBTV-Start-DSMCC+Web], url[http://itv.ard.de/ardstart/index.html]
[eDVBServicePMTHandler] Found : control[2], name[EPG], url[http://itv.ard.de/ardepg/index.php]
[eDVBServicePMTHandler] Found : control[2], name[ARD-Text-DSMCC], url[http://itv2.ard.de/index.html]
[eDVBServicePMTHandler] Found : control[2], name[Tagesschau], url[http://www.tagesschau.de/hbbtv]
[eDVBServicePMTHandler] Found : control[2], name[Mediathek DasErste], url[http://tv.ardmediathek.de/index.html?client=daserste]
[eDVBServicePMTHandler] Found : control[2], name[HBBTV ARD-Mediathek], url[http://tv.ardmediathek.de/index.html]
[eDVBServicePMTHandler] Found : control[2], name[BR-Mediathek], url[http://hbbtv-mediathek.br.de/index.html]
[eDVBServicePMTHandler] Found : control[2], name[HBBTV Tatort], url[http://hbbtv-tatort.daserste.de/index.php]
[eDVBServicePMTHandler] Found : control[2], name[HBBTV Das Erste Check Eins], url[http://hbbtv.daserste.de/?checkeins=1]
[eDVBServicePMTHandler] Found : control[2], name[Babylon Berlin], url[http://hbbtv-babylon.daserste.de/index.php]
[eDVBServicePMTHandler] Found : control[2], name[Sportschau], url[http://tv.ardmediathek.de/index.html?client=sportschau]
[eDVBServicePMTHandler] Found : control[2], name[Replay], url[http://itv.ard.de/replay/index.php]
[eDVBServicePMTHandler] Found : control[2], name[Replay Test], url[http://itv.ard.de/replay/index.php]
[eDVBServicePMTHandler] Found : control[2], name[KiKA-Player ARD], url[http://cdn.hbbtv.kika.de/player/index.php?ard=1]
(1, 'HBBTV-Start-DSMCC+Web', 'http://itv.ard.de/ardstart/index.html' 19, 1, 0)
[eDVBServicePMTHandler] OCready

[Skin] Processing screen 'QuitMainloopScreen', position=(0, 0), size=(1920 x 1080) for module 'QuitMainloopScreen'. [Skin] Parsing embedded skin '<embedded-in-TryQuitMainloop>'. [Skin] Processing screen '<embedded-in-TryQuitMainloop>', position=(0, 0), size=(0 x 0) for module 'TryQuitMainloop'. [Skin] Processing screen 'SimpleSummary' from list 'TryQuitMainloop_summary, SimpleSummary', position=(0, 0), size=(1 x 1) for module 'SimpleSummary'. connectionLost? [Failure instance: Traceback (failure with no frames): <class 'twisted.internet.error.ConnectionLost'>: Connection to the other side was lost in a non-clean fashion: Connection lost. ]

Another mistake

[Skin] Processing screen 'QuitMainloopScreen', position=(0, 0), size=(1920 x 1080) for module 'QuitMainloopScreen'.
[Skin] Parsing embedded skin '<embedded-in-TryQuitMainloop>'.
[Skin] Processing screen '<embedded-in-TryQuitMainloop>', position=(0, 0), size=(0 x 0) for module 'TryQuitMainloop'.
[Skin] Processing screen 'SimpleSummary' from list 'TryQuitMainloop_summary, SimpleSummary', position=(0, 0), size=(1 x 1) for module 'SimpleSummary'.
Unhandled Error
Traceback (most recent call last):
  File "/usr/lib/python2.7/site-packages/twisted/internet/defer.py", line 311, in addCallbacks
    
  File "/usr/lib/python2.7/site-packages/twisted/internet/defer.py", line 654, in _runCallbacks
    
  File "/usr/lib/python2.7/site-packages/twisted/internet/base.py", line 447, in _continueFiring
    
  File "/usr/lib/python2.7/site-packages/twisted/internet/base.py", line 706, in disconnectAll
    
--- <exception caught here> ---
  File "/usr/lib/python2.7/site-packages/twisted/python/log.py", line 103, in callWithLogger
    
  File "/usr/lib/python2.7/site-packages/twisted/python/log.py", line 86, in callWithContext
    
  File "/usr/lib/python2.7/site-packages/twisted/python/context.py", line 122, in callWithContext
    
  File "/usr/lib/python2.7/site-packages/twisted/python/context.py", line 85, in callWithContext
    
  File "/usr/lib/python2.7/site-packages/twisted/internet/unix.py", line 421, in connectionLost
    
exceptions.OSError: [Errno 2] No such file or directory: '/tmp/.sock.stalker'

connectionLost? [Failure instance: Traceback (failure with no frames): <class 'twisted.internet.error.ConnectionLost'>: Connection to the other side was lost in a non-clean fashion: Connection lost.
]
Unhandled Error

I create a folder .sock.stalker

  File "/usr/lib/enigma2/python/Plugins/Extensions/QtStalker/stalker.py", line 54, in __init__
    browserinstance.start()
  File "/usr/lib/enigma2/python/Plugins/Extensions/QtStalker/browser.py", line 27, in start
    self.commandserver = datasocket.CommandServer()
  File "/usr/lib/enigma2/python/Plugins/Extensions/QtStalker/datasocket.py", line 58, in __init__
    self.port = reactor.listenUNIX('/tmp/.sock.stalker', self.factory)
  File "/usr/lib/python2.7/site-packages/twisted/internet/posixbase.py", line 397, in listenUNIX
  File "/usr/lib/python2.7/site-packages/twisted/internet/unix.py", line 398, in startListening
twisted.internet.error.CannotListenError: Couldn't listen on any:/tmp/.sock.stalker: [Errno 98] Address already in use.

Edited by foxbob, 3 June 2020 - 19:14.

[foxbob]

qtwebbrowser works well if you stop enigma2.May need to be added during assembly browser and stalker virtual/libgles2?

[foxbob]

I launch YouTube with this script

#!/bin/sh
init 4
export QTWEBENGINE_DISABLE_SANDBOX=1
export QT_QPA_FONTDIR=/usr/share/fonts
export QT_QPA_PLATFORM=linuxfb
export QT_QPA_EGLFS_INTEGRATION=eglfs_emu
export $(dbus-launch)
/usr/bin/qtwebflix -p https://www.youtube.com/?gl=RU

Maybe this is only on my receiver,but there is no hardware support,it seems to me that way.

[WTE]

I launch YouTube with this script

#!/bin/sh
init 4
export QTWEBENGINE_DISABLE_SANDBOX=1
export QT_QPA_FONTDIR=/usr/share/fonts
export QT_QPA_PLATFORM=linuxfb
export QT_QPA_EGLFS_INTEGRATION=eglfs_emu
export $(dbus-launch)
/usr/bin/qtwebflix -p https://www.youtube.com/?gl=RU

Maybe this is only on my receiver,but there is no hardware support,it seems to me that way.

 

Check first: chrome://gpu

I do not see very high cpuload on Youtube and it works just perfect on my hisilicon box.

(Test on qtwebbrowser )

[foxbob]

I made a screenshot of this team. That's why everything is very bad for me.

 

https://drive.google...iew?usp=sharing

 

https://drive.google...iew?usp=sharing

Edited by foxbob, 7 June 2020 - 15:14.

[WTE]

You need probably eglfs support to have more hardware support. So probably this is difficult to get.