16 replies to this topic

[Rigo]

GigaBlue UHD-4K is vandaag aangekomen, OpenPli 7.2 geinstalleerd ... en scannen maar.  6000 of zo kanalen gevonden, ging dus beter (en sneller) dan met de ET4000-jes.  Webinterface werkt ook stukken sneller.

Ik had gehoopt de SSD van de ET9500 gewoon te kunnen overhevelen, maar die wordt niet goed herkend (1GB ipv 500 GB of zo)

[WanWizard]

Dat is apart, aannemende dat de SSD gewoon in de box is geformateerd, moet daar geen verschil in zitten.

 

Herstart de box eens, en post daarna eens de output van het dmesg commando?

[Rigo]

dmesg

[    0.000000] Booting Linux on physical CPU 0x0

[    0.000000] Linux version 4.1.20-1.9 (oe-user@oe-host) (gcc version 6.3.0 (GCC) ) #1 SMP Tue Dec 10 11:27:09 CET 2019

[    0.000000] CPU: ARMv7 Processor [420f00f3] revision 3 (ARMv7), cr=30c5387d

[    0.000000] CPU: PIPT / VIPT nonaliasing data cache, PIPT instruction cache

[    0.000000] Machine model: gbquad4k

[    0.000000] moving dtb from 0x0000000007624000 to 0x000000000098da78

[    0.000000] bmem: Reserved 529 MiB at 0x000000001eb00000

[    0.000000] bmem: Reserved 608 MiB at 0x000000009a000000

[    0.000000] cma: Reserved 16 MiB at 0x0000000098c00000

[    0.000000] Forcing write-allocate cache policy for SMP

[    0.000000] Memory policy: Data cache writealloc

[    0.000000] On node 0 totalpages: 524288

[    0.000000]   DMA zone: 964 pages used for memmap

[    0.000000]   DMA zone: 0 pages reserved

[    0.000000]   DMA zone: 123392 pages, LIFO batch:31

[    0.000000]   HighMem zone: 400896 pages, LIFO batch:31

[    0.000000] PERCPU: Embedded 12 pages/cpu @dd1ab000 s16844 r8192 d24116 u49152

[    0.000000] pcpu-alloc: s16844 r8192 d24116 u49152 alloc=12*4096

[    0.000000] pcpu-alloc: [0] 0 [0] 1

[    0.000000] Built 1 zonelists in Zone order, mobility grouping on.  Total pages: 523324

[    0.000000] Kernel command line: root=/dev/mmcblk0p5 rootwait rw rootflags=data=journal libata.force=1:3.0G,2:3.0G,3:3.0G coherent_poll=2M vmalloc=525m bmem=529m@491m bmem=608m@2464m

[    0.000000] PID hash table entries: 2048 (order: 1, 8192 bytes)

[    0.000000] Dentry cache hash table entries: 65536 (order: 6, 262144 bytes)

[    0.000000] Inode-cache hash table entries: 32768 (order: 5, 131072 bytes)

[    0.000000] Memory: 889536K/2097152K available (6695K kernel code, 325K rwdata, 2184K rodata, 316K init, 214K bss, 1191232K reserved, 16384K cma-reserved, 422904K highmem)

[    0.000000] Virtual kernel memory layout:

[    0.000000]     vector  : 0xffff0000 - 0xffff1000   (   4 kB)

[    0.000000]     fixmap  : 0xffc00000 - 0xfff00000   (3072 kB)

[    0.000000]     vmalloc : 0xde800000 - 0xff000000   ( 520 MB)

[    0.000000]     lowmem  : 0xc0000000 - 0xde300000   ( 483 MB)

[    0.000000]     pkmap   : 0xbfe00000 - 0xc0000000   (   2 MB)

[    0.000000]     modules : 0xbf000000 - 0xbfe00000   (  14 MB)

[    0.000000]       .text : 0xc0008000 - 0xc08b42b8   (8881 kB)

[    0.000000]       .init : 0xc08b5000 - 0xc0904000   ( 316 kB)

[    0.000000]       .data : 0xc0904000 - 0xc0955738   ( 326 kB)

[    0.000000]        .bss : 0xc0958000 - 0xc098da78   ( 215 kB)

[    0.000000] Hierarchical RCU implementation.

[    0.000000]  RCU restricting CPUs from NR_CPUS=4 to nr_cpu_ids=2.

[    0.000000] RCU: Adjusting geometry for rcu_fanout_leaf=16, nr_cpu_ids=2

[    0.000000] NR_IRQS:16 nr_irqs:16 16

[    0.000000] irq_brcmstb_l2: registered L2 intc (mem: 0xde802000, parent irq: 93)

[    0.000000] irq_brcmstb_l2: registered L2 intc (mem: 0xde808000, parent irq: 64)

[    0.000000] irq_brcmstb_l2: registered L2 intc (mem: 0xde80aa00, parent irq: 65)

[    0.000000] irq_brcmstb_l2: registered L2 intc (mem: 0xde80c640, parent irq: 95)

[    0.000000] irq_brcmstb_l2: registered L2 intc (mem: 0xde80e200, parent irq: 58)

[    0.000000] irq_bcm7120_l2: registered BCM7120 L2 intc (mem: 0xfc40a700, parent IRQ(s): 2)

[    0.000000] irq_bcm7120_l2: registered BCM7120 L2 intc (mem: 0xde810380, parent IRQ(s): 3)

[    0.000000] MCP: Enabling write pairing

[    0.000000] Architected cp15 timer(s) running at 27.00MHz (virt).

[    0.000000] clocksource arch_sys_counter: mask: 0xffffffffffffff max_cycles: 0x63a1e71a3, max_idle_ns: 440795203123 ns

[    0.000003] sched_clock: 56 bits at 27MHz, resolution 37ns, wraps every 4398046511093ns

[    0.000010] Switching to timer-based delay loop, resolution 37ns

[    0.000358] Console: colour dummy device 80x30

[    0.000376] Calibrating delay loop (skipped), value calculated using timer frequency.. 54.00 BogoMIPS (lpj=27000)

[    0.000384] pid_max: default: 32768 minimum: 301

[    0.000486] Mount-cache hash table entries: 1024 (order: 0, 4096 bytes)

[    0.000491] Mountpoint-cache hash table entries: 1024 (order: 0, 4096 bytes)

[    0.000968] CPU: Testing write buffer coherency: ok

[    0.001137] CPU0: update cpu_capacity 1024

[    0.001143] CPU0: thread -1, cpu 0, socket 0, mpidr 80000000

[    0.001351] Setting up static identity map for 0x8480 - 0x84d8

[    0.004048] CPU1: update cpu_capacity 1024

[    0.004052] CPU1: thread -1, cpu 1, socket 0, mpidr 80000001

[    0.004111] Brought up 2 CPUs

[    0.004123] SMP: Total of 2 processors activated (108.00 BogoMIPS).

[    0.004128] CPU: All CPU(s) started in SVC mode.

[    0.004464] devtmpfs: initialized

[    0.013683] VFP support v0.3: implementor 42 architecture 4 part 00 variant 0 rev 0

[    0.013909] clocksource jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 1911260446275000 ns           

[    0.015198] NET: Registered protocol family 16

[    0.015850] DMA: preallocated 256 KiB pool for atomic coherent allocations

[    0.023152] cpuidle: using governor ladder

[    0.029167] cpuidle: using governor menu

[    0.036355] No ATAGs?

[    0.036384] hw-breakpoint: found 5 (+1 reserved) breakpoint and 4 watchpoint registers.

[    0.036390] hw-breakpoint: maximum watchpoint size is 8 bytes.

[    0.036598] Broadcom Brahma-B15 readahead cache at: 0xde954478

[    0.050667] brcmstb-gpio f040a600.gpio: Registered 5 banks (GPIO(s): 0-159)

[    0.050855] brcmstb-gpio f0417400.gpio: Registered 2 banks (GPIO(s): 160-223)

[    0.051196] SCSI subsystem initialized

[    0.052596] libata version 3.00 loaded.

[    0.052765] usbcore: registered new interface driver usbfs

[    0.052798] usbcore: registered new interface driver hub

[    0.052843] usbcore: registered new device driver usb

[    0.052910] Linux video capture interface: v2.00

[    0.052986] pps_core: LinuxPPS API ver. 1 registered

[    0.052990] pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giometti <giometti@linux.it> 

[    0.053010] PTP clock support registered

[    0.053527] Advanced Linux Sound Architecture Driver Initialized.

[    0.054770] Switched to clocksource arch_sys_counter

[    0.054974] FS-Cache: Loaded

[    0.060839] thermal thermal_zone0: failed to read out thermal zone (-22)

[    0.060941] NET: Registered protocol family 2

[    0.061283] TCP established hash table entries: 4096 (order: 2, 16384 bytes)

[    0.061306] TCP bind hash table entries: 4096 (order: 3, 32768 bytes)

[    0.061344] TCP: Hash tables configured (established 4096 bind 4096)

[    0.061384] UDP hash table entries: 256 (order: 1, 8192 bytes)

[    0.061395] UDP-Lite hash table entries: 256 (order: 1, 8192 bytes)

[    0.061492] NET: Registered protocol family 1

[    0.061663] RPC: Registered named UNIX socket transport module.

[    0.061667] RPC: Registered udp transport module.

[    0.061670] RPC: Registered tcp transport module.

[    0.061673] RPC: Registered tcp NFSv4.1 backchannel transport module.

[    0.061686] PCI: CLS 0 bytes, default 64

[    0.062017] CPU PMU: Failed to parse /pmu/interrupt-affinity[0]

[    0.062047] hw perfevents: enabled with armv7_cortex_a15 PMU driver, 7 counters available

[    0.062905] futex hash table entries: 512 (order: 3, 32768 bytes)

[    0.064230] NFS: Registering the id_resolver key type

[    0.064253] Key type id_resolver registered

[    0.064257] Key type id_legacy registered

[    0.064268] nfs4filelayout_init: NFSv4 File Layout Driver Registering...

[    0.064273] Installing knfsd (copyright © 1996 okir@monad.swb.de).

[    0.064412] FS-Cache: Netfs 'cifs' registered for caching

[    0.064451] Key type cifs.spnego registered

[    0.064574] fuse init (API version 7.23)

[    0.065482] bounce: pool size: 64 pages

[    0.065514] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 252)

[    0.065526] io scheduler noop registered

[    0.065533] io scheduler deadline registered

[    0.065546] io scheduler cfq registered (default)

[    0.065807] brcm-gisb-arb f0400000.gisb-arb: registered mem: de97c000, irqs: 261, 262

[    0.066555] brcmstb-sata-phy f0458100.sata_phy: registered 2 port(s)

[    0.066960] brcm-pci f0460000.pcie: adjusting to legacy (broken) pcie DT

[    0.167143] brcm-pci f0460000.pcie: link down

[    0.167189] brcm-pci f0490000.pcie: adjusting to legacy (broken) pcie DT

[    0.267360] brcm-pci f0490000.pcie: link down

[    0.268729] brcmstb_memc f1102000.memc-ddr: registered

[    0.268783] brcmstb_memc f1182000.memc-ddr: registered

[    0.268984] brcm-waketimer f0417580.waketimer: registered, with irq 263

[    0.269195] Serial: 8250/16550 driver, 4 ports, IRQ sharing disabled

[    0.270302] console [ttyS0] disabled

[    0.270330] f040a900.serial: ttyS0 at MMIO 0xf040a900 (irq = 107, base_baud = 5062500) is a 16550A                   

[    1.007230] console [ttyS0] enabled

[    1.011127] f040a940.serial: ttyS1 at MMIO 0xf040a940 (irq = 108, base_baud = 5062500) is a 16550A                   

[    1.020401] f040a980.serial: ttyS2 at MMIO 0xf040a980 (irq = 109, base_baud = 5062500) is a 16550A                   

[    1.032799] loop: module loaded

[    1.036858] brcm-ahci f045a000.sata: controller can do ALPM, turning on CAP_ALPM

[    1.044276] brcm-ahci f045a000.sata: masking port_map 0x3 -> 0x3

[    1.050325] brcm-ahci f045a000.sata: SSS flag set, parallel bus scan disabled

[    1.067784] brcm-ahci f045a000.sata: AHCI 0001.0300 32 slots 2 ports 6 Gbps 0x3 impl platform mode                   

[    1.076767] brcm-ahci f045a000.sata: flags: 64bit ncq sntf stag pm clo pmp slum part

[    1.086272] scsi host0: brcm-ahci

[    1.089843] scsi host1: brcm-ahci

[    1.093321] ata1: FORCE: PHY spd limit set to 3.0Gbps

[    1.098387] ata1: SATA max UDMA/133 mmio [mem 0xf045a000-0xf045aa9b] port 0x100 irq 91

[    1.106317] ata2: FORCE: PHY spd limit set to 3.0Gbps

[    1.111379] ata2: SATA max UDMA/133 mmio [mem 0xf045a000-0xf045aa9b] port 0x180 irq 91

[    1.119315] brcm-ahci f045a000.sata: Broadcom AHCI SATA3 registered

[    1.126452] brcmstb_qspi f03e3400.spi: using bspi-mspi mode

[    1.132094] brcmstb_qspi f03e3400.spi: IRQ spi_l1_intr not found

[    1.138128] brcmstb_qspi: probe of f03e3400.spi failed with error -22

[    1.144605] brcmstb_qspi f03e0920.qspi: using bspi-mspi mode

[    1.150768] m25p80 spi32766.0: found mx25l3205d, expected m25p80

[    1.156792] m25p80 spi32766.0: mx25l3205d (4096 Kbytes)

[    1.162048] 5 ofpart partitions found on MTD device spi32766.0

[    1.167892] Creating 5 MTD partitions on "spi32766.0":

[    1.173044] 0x000000000000-0x000000100000 : "flash0.bolt"

[    1.178984] 0x000000100000-0x000000110000 : "flash0.macadr"

[    1.185006] 0x000000110000-0x000000120000 : "flash0.nvram"

[    1.190935] 0x000000120000-0x000000130000 : "flash0.devtree"

[    1.197042] 0x000000000000-0x000000400000 : "flash0"

[    1.203066] libphy: Fixed MDIO Bus: probed

[    1.207601] bcmgenet f0b00000.ethernet: GENET 4.5 EPHY: 0x1001

[    1.213500] bcmgenet f0b00000.ethernet: failed to get enet-mux clock

[    1.230777] ata1: SATA link down (SStatus 0 SControl 320)

[    1.236769] libphy: bcmgenet MII bus: probed

[    1.261623] e1000e: Intel® PRO/1000 Network Driver - 2.3.2-k

[    1.267476] e1000e: Copyright© 1999 - 2014 Intel Corporation.

[    1.273603] xhci-brcm: xHCI BRCM driver

[    1.292262] xhci-brcm f0471000.xhci_v2: xHCI Host Controller

[    1.298043] xhci-brcm f0471000.xhci_v2: new USB bus registered, assigned bus number 1

[    1.306116] xhci-brcm f0471000.xhci_v2: hcc params 0x0250f17d hci version 0x100 quirks 0x00010090                    

[    1.315024] xhci-brcm f0471000.xhci_v2: irq 149, io mem 0xf0471000

[    1.321661] hub 1-0:1.0: USB hub found

[    1.325447] hub 1-0:1.0: config failed, hub doesn't have any ports! (err -19)

[    1.332716] xhci-brcm f0471000.xhci_v2: xHCI Host Controller

[    1.338484] xhci-brcm f0471000.xhci_v2: new USB bus registered, assigned bus number 2

[    1.346378] usb usb2: We don't know the algorithms for LPM for this host, disabling LPM.

[    1.354858] hub 2-0:1.0: USB hub found

[    1.358637] hub 2-0:1.0: 2 ports detected

[    1.363035] ehci-brcm: EHCI BRCM driver

[    1.367003] ehci-brcm f0470300.ehci_v2: EHCI Host Controller

[    1.372789] ehci-brcm f0470300.ehci_v2: new USB bus registered, assigned bus number 3

[    1.390753] ehci-brcm f0470300.ehci_v2: irq 145, io mem 0xf0470300

[    1.402777] ehci-brcm f0470300.ehci_v2: USB 2.0 started, EHCI 1.00

[    1.409353] hub 3-0:1.0: USB hub found

[    1.413132] hub 3-0:1.0: 1 port detected

[    1.417309] ehci-brcm f0470500.ehci_v2: EHCI Host Controller

[    1.423089] ehci-brcm f0470500.ehci_v2: new USB bus registered, assigned bus number 4

[    1.441037] ehci-brcm f0470500.ehci_v2: irq 146, io mem 0xf0470500

[    1.452774] ehci-brcm f0470500.ehci_v2: USB 2.0 started, EHCI 1.00

[    1.459340] hub 4-0:1.0: USB hub found

[    1.463199] hub 4-0:1.0: 1 port detected

[    1.467433] ohci-brcm: OHCI BRCM driver

[    1.471370] ohci-brcm f0470400.ohci_v2: BRCM OHCI controller

[    1.477139] ohci-brcm f0470400.ohci_v2: new USB bus registered, assigned bus number 5

[    1.485055] ohci-brcm f0470400.ohci_v2: irq 147, io mem 0xf0470400

[    1.517781] ata2: SATA link up 3.0 Gbps (SStatus 123 SControl 320)

[    1.524053] ata2.00: ATA-9: SM2258AB-10-00831000, 20141211, max UDMA/100

[    1.530775] ata2.00: 2096640 sectors, multi 1: LBA

[    1.535746] ata2.00: configured for UDMA/100

[    1.540241] scsi 1:0:0:0: Direct-Access     ATA      SM2258AB-10-0083 1211 PQ: 0 ANSI: 5

[    1.546254] hub 5-0:1.0: USB hub found

[    1.546274] hub 5-0:1.0: 1 port detected

[    1.546546] ohci-brcm f0470600.ohci_v2: BRCM OHCI controller

[    1.546660] ohci-brcm f0470600.ohci_v2: new USB bus registered, assigned bus number 6

[    1.546738] ohci-brcm f0470600.ohci_v2: irq 148, io mem 0xf0470600

[    1.576213] sd 1:0:0:0: [sda] 2096640 512-byte logical blocks: (1.07 GB/1024 MiB)

[    1.583819] sd 1:0:0:0: Attached scsi generic sg0 type 0

[    1.583897] sd 1:0:0:0: [sda] Write Protect is off

[    1.583901] sd 1:0:0:0: [sda] Mode Sense: 00 3a 00 00

[    1.583951] sd 1:0:0:0: [sda] Write cache: disabled, read cache: enabled, doesn't support DPO or FUA                 

[    1.584988] sd 1:0:0:0: [sda] Attached SCSI disk

[    1.601261] hub 6-0:1.0: USB hub found

[    1.601302] hub 6-0:1.0: 1 port detected

[    1.601662] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver

[    1.601675] ehci-pci: EHCI PCI platform driver

[    1.601730] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver

[    1.601739] ohci-pci: OHCI PCI platform driver

[    1.601896] usbcore: registered new interface driver usb-storage

[    1.602112] mousedev: PS/2 mouse device common for all mice

[    1.602476] i2c /dev entries driver

[    1.603123] IR NEC protocol handler initialized

[    1.603128] IR RC5(x/sz) protocol handler initialized

[    1.603132] IR RC6 protocol handler initialized

[    1.603136] IR JVC protocol handler initialized

[    1.603140] IR Sony protocol handler initialized

[    1.603145] IR SANYO protocol handler initialized

[    1.603149] IR Sharp protocol handler initialized

[    1.603153] IR MCE Keyboard/mouse protocol handler initialized

[    1.603157] IR XMP protocol handler initialized

[    1.603962] brcmstb_thermal f04d1500.thermal: registered AVS TMON of-sensor driver

[    1.604571] brcmstb-cpufreq f03e257c.cpu-clk-div: registered

[    1.604801] sdhci: Secure Digital Host Controller Interface driver

[    1.604803] sdhci: Copyright© Pierre Ossman

[    1.604808] sdhci-pltfm: SDHCI platform and OF driver helper

[    1.606153] sdhci-brcmstb f03e0000.sdhci: No vmmc regulator found

[    1.606156] sdhci-brcmstb f03e0000.sdhci: No vqmmc regulator found

[    1.636773] mmc0: SDHCI controller on f03e0000.sdhci [f03e0000.sdhci] using ADMA

[    1.638959] sdhci-brcmstb f03e0200.sdhci: No vmmc regulator found

[    1.638962] sdhci-brcmstb f03e0200.sdhci: No vqmmc regulator found

[    1.664895] usb 2-2: new SuperSpeed USB device number 2 using xhci-brcm

[    1.668773] mmc1: SDHCI controller on f03e0200.sdhci [f03e0200.sdhci] using ADMA

[    1.668933] hidraw: raw HID events driver © Jiri Kosina

[    1.669168] usbcore: registered new interface driver usbhid

[    1.669170] usbhid: USB HID core driver

[    1.671926] Initializing XFRM netlink socket

[    1.690686] NET: Registered protocol family 10

[    1.695279] NET: Registered protocol family 17

[    1.695300] NET: Registered protocol family 15

[    1.695449] Key type dns_resolver registered

[    1.695541] Registering SWP/SWPB emulation handler

[    1.702750] ALSA device list:

[    1.702752]   No soundcards found.

[    1.704806] hub 2-2:1.0: USB hub found

[    1.705901] hub 2-2:1.0: 4 ports detected

[    1.769774] usb 4-1: new high-speed USB device number 2 using ehci-brcm

[    1.774389] mmc1: MAN_BKOPS_EN bit is not set

[    1.780724] mmc1: new high speed MMC card at address 0001

[    1.781025] mmcblk0: mmc1:0001 004GE0 3.69 GiB

[    1.781093] mmcblk0boot0: mmc1:0001 004GE0 partition 1 2.00 MiB

[    1.781157] mmcblk0boot1: mmc1:0001 004GE0 partition 2 2.00 MiB

[    1.783736]  mmcblk0: p1 p2 p3 p4 p5 p6 p7 p8 p9 p10

[    1.865229] EXT3-fs (mmcblk0p5): error: couldn't mount because of unsupported optional features (240)                

[    1.874849] EXT4-fs: Warning: mounting with data=journal disables delayed allocation and O_DIRECT support!           

[    1.889887] EXT4-fs (mmcblk0p5): mounted filesystem with journalled data mode. Opts: data=journal                    

[    1.898818] VFS: Mounted root (ext4 filesystem) on device 179:5.

[    1.905450] devtmpfs: mounted

[    1.908575] Freeing unused kernel memory: 316K (c08b5000 - c0904000)

[    1.917970] hub 4-1:1.0: USB hub found

[    1.922134] hub 4-1:1.0: 4 ports detected

[    2.254040] EXT4-fs (mmcblk0p5): re-mounted. Opts: nodelalloc,data=journal

[    2.572153] random: dd urandom read with 27 bits of entropy available

[    2.756712] nexus: module license 'Proprietary' taints kernel.

[    2.762580] Disabling lock debugging due to kernel taint

[    2.786100] nexus driver initialized

[    2.872949] nexus.ko: virtual irq: enabled (273)

[    2.877675] nexus.ko: shared gpio banks: enabled

[    4.879883] version: 20191127104301-u171

[    5.267076] LCD: R61509V

[    5.590440] input: gigablue remote control as /devices/virtual/input/input0

[    5.599373] DVB: registering new adapter (_gigablue_)

[    5.757892] dvb dvb.0: DVB: registering adapter 0 frontend 0 (DVB-S2X NIM(45308X FBC))...

[    5.771275] dvb dvb.0: DVB: registering adapter 0 frontend 0 (DVB-S2X NIM(45308X FBC))...

[    5.781510] dvb dvb.0: DVB: registering adapter 0 frontend 0 (DVB-S2X NIM(45308X FBC))...

[    5.791647] dvb dvb.0: DVB: registering adapter 0 frontend 0 (DVB-S2X NIM(45308X FBC))...

[    5.801717] dvb dvb.0: DVB: registering adapter 0 frontend 0 (DVB-S2X NIM(45308X FBC))...

[    5.811834] dvb dvb.0: DVB: registering adapter 0 frontend 0 (DVB-S2X NIM(45308X FBC))...

[    5.821819] dvb dvb.0: DVB: registering adapter 0 frontend 0 (DVB-S2X NIM(45308X FBC))...

[    5.832263] dvb dvb.0: DVB: registering adapter 0 frontend 0 (DVB-S2X NIM(45308X FBC))...

[    7.207785] random: nonblocking pool is initialized

[    7.911037] f0b00000.etherne:01: Broadcom BCM7439 (2) PHY revision: 0x10, patch: 1

[    7.921560] bcmgenet f0b00000.ethernet: configuring instance for internal PHY

[    7.928811] IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready

[    9.935912] bcmgenet f0b00000.ethernet eth0: Link is Down

[   11.134252] bcmgenet f0b00000.ethernet eth0: Link is Up - 1Gbps/Full - flow control rx/tx

[   11.143111] IPv6: ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready

[   20.248807] BTHID bthid_init: ++

[   20.249269] BTHID bthid_init: --

[   20.264047] usbcore: registered new interface driver btusb

root@gbquad4k:~# GigaBlue UHD-4K 

[Rigo]

Ik was wel ergens tegengekomen dat je EXT3 en EXT2 kon installeren; 3 heb ik geinstalleerd maar die geeft blijkbaar een error.

De ET9500 waar de schijf in zat had al 6.2, maar het zou kunnen dat die schijf er al in stak toen er maar 4.0 op stond ... ik weet niet welke filesystemen dan mogelijk waren.

[Rigo]

SSD is een Crucial MX500, die SM2258AB-10-00831000 in de log slaat op de controller chip die er in zit.

[WanWizard]

Het probleem is niet het filesystem:

[    1.517781] ata2: SATA link up 3.0 Gbps (SStatus 123 SControl 320)
[    1.524053] ata2.00: ATA-9: SM2258AB-10-00831000, 20141211, max UDMA/100
[    1.530775] ata2.00: 2096640 sectors, multi 1: LBA
[    1.535746] ata2.00: configured for UDMA/100
[    1.540241] scsi 1:0:0:0: Direct-Access     ATA      SM2258AB-10-0083 1211 PQ: 0 ANSI: 5
[    1.576213] sd 1:0:0:0: [sda] 2096640 512-byte logical blocks: (1.07 GB/1024 MiB)
[    1.583819] sd 1:0:0:0: Attached scsi generic sg0 type 0
[    1.583897] sd 1:0:0:0: [sda] Write Protect is off
[    1.583901] sd 1:0:0:0: [sda] Mode Sense: 00 3a 00 00
[    1.583951] sd 1:0:0:0: [sda] Write cache: disabled, read cache: enabled, doesn't support DPO or FUA                 
[    1.584988] sd 1:0:0:0: [sda] Attached SCSI disk

Aannemende dat je niet ook een USB stick aangesloten hebt, ziet linux de disk als 1GB .

Als ik even Google, dan zie ik meer mensen met  dit problem, ook in Windows. Maar weinig oplossingen.
 
Ik heb een hele stapel MX-500's in gebruik, zonder problemen, dus een structureel probleem met deze drives lijkt me niet aan de orde.
 
Je zou eens een SMART check kunnen doen:

opkg install smartmontools
smartctl -i /dev/sda

 

[Rigo]

=== START OF INFORMATION SECTION ===

Device Model:     CT500MX500SSD1                                                                                       

Serial Number:    1805E10CE053                                                                                         

LU WWN Device Id: 5 00a075 1e10ce053                                                                                   

Firmware Version: M3CR010                                                                                               

User Capacity:    500,107,862,016 bytes [500 GB]                                                                       

Sector Sizes:     512 bytes logical, 4096 bytes physical                                                               

Device is:        Not in smartctl database [for details use: -P showall]                                               

ATA Version is:   8                                                                                                   

 ATA Standard is:  ACS-3 (unknown minor revision code: 0x006d)                                                           

Local Time is:    Tue May 19 21:13:47 2020 CEST                                                                         

SMART support is: Available - device has SMART capability.                                                             

SMART support is: Enabled                                                                                                

[WanWizard]

Dus die herkent de disk wel juist. Dat is al wat.

 

Normaal zou mijn reactie zijn "er is een bios update nodig", maar dat is wat lastig bij een STB .

 

Misschien zijn er hardware experts in de zaal?

 

edit: misschien nog even, wat zegt

gdisk-l /dev/sda

Edited by WanWizard, 19 May 2020 - 20:42.

[Rigo]

not found ...

[Rigo]

Na een hoop gegoogle ,,, fsdisk ipv gdisk.

 

root@gbquad4k:~# sfdisk -l /dev/sda

Disk /dev/sda: 465.8 GiB, 500107862016 bytes, 976773168 sectors

Units: sectors of 1 * 512 = 512 bytes

Sector size (logical/physical): 512 bytes / 4096 bytes

I/O size (minimum/optimal): 4096 bytes / 4096 bytes

Disklabel type: dos

Disk identifier: 0x00000000

Device             Boot Start              End        Sectors      Size    Id  Type

/dev/sda1                       8  976773167  976773160  465.8G  83  Linux  

[WanWizard]

Dat suggereert dat er een oude partition table op staat.

 

Wat gebeurt er als je gewoon probeert 't ding te mounten?

mkdir /media/hdd
mount /dev/sda1 /media/hdd

?

[Rigo]

Om de een of andere obscure reden is de disk nu plots wel beschikbaar ???

Kan dat zijn door die commandos uit te voeren ?

 

In ieder geval bedankt voor de hulp 

[Rigo]

Mounten moest ik ook niet meer doen, ik kon direct de lijst van opnames opvragen.  Moeder de vrouw zal blij zijn ...

[WanWizard]

Apart. Vraag niet hoe het kan, profiteer ervan .

 

Werkt het na een herstart ook nog? En na een deep standby, even van de stroom afhalen, en weer aanzetten?

 

Moeder de vrouw moet je wel blij houden...

[Rigo]

Veiligheidshalve toch maar eens gecheckt ... na deep standby en stroom af werkt het nog steeds.  En ook vanop een andere receiver, blijheid gegarandeerd.

 

Dan kan ik mij nu terug concentreren op de gebrekkige werking van de switches op de ET4000jes

[Jork]

...en ook nog voor de volledigheid even checken of je kunt opnemen.

[Rigo]

...en ook nog voor de volledigheid even checken of je kunt opnemen.

Dat is momenteel weer niet relevant, want weer geen signaal ...