I have tried to sort out my problem with some channels freezing. It's about 5 of my channels. Not the same transponder, but all off them on 1 west. It freezes and opens again without any system. Comes and goes. 90-100% on signals/SNR, BER 0 (Don't know if it means anything...) Had this problem for ages. Switched cables to the LNB, changed LNB, changed receiver. Could it be interference from other things in my house? Getting nuts about this.
Freezing channels.
Started by nor50, 30 May 2020 12:41
21 replies to this topic
#1
-
- Senior Member
- 423 posts
+1
Neutral
Posted 30 May 2020 - 12:41
VU+ Ultimo 4K, 19.2, 13, 4.8 E via switch on input/tuner 1. 1W. Inverto Unicable II LNB IDLU-32UL40 on input/tuner 2. OpenPLi 8.3
Re: Freezing channels. #2
-
- Senior Member
- 423 posts
+1
Neutral
Posted 30 May 2020 - 14:07
Video showing what's happening. https://fil.email/lKOSBJyN (Expires after a week...)
Edited by nor50, 30 May 2020 - 14:07.
VU+ Ultimo 4K, 19.2, 13, 4.8 E via switch on input/tuner 1. 1W. Inverto Unicable II LNB IDLU-32UL40 on input/tuner 2. OpenPLi 8.3
Re: Freezing channels. #3
-
- Senior Member
- 5,461 posts
+114
Excellent
Posted 30 May 2020 - 15:16
What viewing card are you using?
Met één been in het graf..... Helaas
Re: Freezing channels. #4
-
- Senior Member
- 423 posts
+1
Neutral
Posted 30 May 2020 - 16:39
Canal Digital Nordic. Tried other cards with the same result. Has nothing to do with descrambling.
Edited by nor50, 30 May 2020 - 16:40.
VU+ Ultimo 4K, 19.2, 13, 4.8 E via switch on input/tuner 1. 1W. Inverto Unicable II LNB IDLU-32UL40 on input/tuner 2. OpenPLi 8.3
Re: Freezing channels. #5
-
- Senior Member
- 423 posts
+1
Neutral
Posted 13 July 2020 - 00:56
This weekend my problems ended, it looks like! I have done different things with boxes, cables and so on, so now the freezing is gone! It must have been an interference, but as I have done a lot of things, I don't know what it was. But more than a year with problems is over!
VU+ Ultimo 4K, 19.2, 13, 4.8 E via switch on input/tuner 1. 1W. Inverto Unicable II LNB IDLU-32UL40 on input/tuner 2. OpenPLi 8.3
Re: Freezing channels. #6
-
- Senior Member
- 423 posts
+1
Neutral
Posted 16 July 2020 - 17:22
It's back... :-(
VU+ Ultimo 4K, 19.2, 13, 4.8 E via switch on input/tuner 1. 1W. Inverto Unicable II LNB IDLU-32UL40 on input/tuner 2. OpenPLi 8.3
Re: Freezing channels. #7
-
- PLi® Core member
- 9,051 posts
+56
Good
Posted 21 July 2020 - 20:58
Are you using Oscam?If so, look into the live log to see what is happening.
Plinux member We have a.. (ehmm.. morgage) house.
Re: Freezing channels. #8
-
- Senior Member
- 423 posts
+1
Neutral
Posted 21 July 2020 - 21:55
Are you using Oscam?If so, look into the live log to see what is happening.
1. I don't know how to do it. 2. It's not about descrambling of signals.
VU+ Ultimo 4K, 19.2, 13, 4.8 E via switch on input/tuner 1. 1W. Inverto Unicable II LNB IDLU-32UL40 on input/tuner 2. OpenPLi 8.3
Re: Freezing channels. #9
-
- PLi® Core member
- 9,051 posts
+56
Good
Posted 27 July 2020 - 16:13
Are you using Oscam?If so, look into the live log to see what is happening.
1. I don't know how to do it. 2. It's not about descrambling of signals.
Okay, so unecrypted channels.
note that Some Transponder at the 1.0 west position are put on the nordic beam. The signal at tour location could be to low in Some weather conditions.
Edited by Rick Hunter, 27 July 2020 - 16:52.
Plinux member We have a.. (ehmm.. morgage) house.
Re: Freezing channels. #10
-
- Senior Member
- 423 posts
+1
Neutral
Posted 27 July 2020 - 17:34
Are you using Oscam?If so, look into the live log to see what is happening.
1. I don't know how to do it. 2. It's not about descrambling of signals.
Okay, so unecrypted channels.
note that Some Transponder at the 1.0 west position are put on the nordic beam. The signal at tour location could be to low in Some weather conditions.
It's encrypted channels, and it's not weak channels. It's a mystery.
VU+ Ultimo 4K, 19.2, 13, 4.8 E via switch on input/tuner 1. 1W. Inverto Unicable II LNB IDLU-32UL40 on input/tuner 2. OpenPLi 8.3
Re: Freezing channels. #11
-
- Senior Member
- 108 posts
+2
Neutral
Posted 28 July 2020 - 07:57
I had a problem like this, i changed my ethernet network cable and it fixed the problem.
it first showd 100mb/sec now 1GB/sec
Re: Freezing channels. #12
-
- Senior Member
- 423 posts
+1
Neutral
Posted 28 July 2020 - 10:16
I had a problem like this, i changed my ethernet network cable and it fixed the problem.
it first showd 100mb/sec now 1GB/sec
I have tried another receiver, another coax to the dish, another lnb, another ethernet cable, another everything...
VU+ Ultimo 4K, 19.2, 13, 4.8 E via switch on input/tuner 1. 1W. Inverto Unicable II LNB IDLU-32UL40 on input/tuner 2. OpenPLi 8.3
Re: Freezing channels. #13
-
- Senior Member
- 423 posts
+1
Neutral
Posted 12 September 2020 - 11:20
I think I've finally found the problem! I toke the power off a network dish yesterday, and have not seen anything freezing after that!
VU+ Ultimo 4K, 19.2, 13, 4.8 E via switch on input/tuner 1. 1W. Inverto Unicable II LNB IDLU-32UL40 on input/tuner 2. OpenPLi 8.3
Re: Freezing channels. #14
-
- Senior Member
- 423 posts
+1
Neutral
Posted 13 September 2020 - 10:40
:-( After 2 days it's back.
VU+ Ultimo 4K, 19.2, 13, 4.8 E via switch on input/tuner 1. 1W. Inverto Unicable II LNB IDLU-32UL40 on input/tuner 2. OpenPLi 8.3
Re: Freezing channels. #15
-
- Senior Member
- 423 posts
+1
Neutral
Posted 13 September 2020 - 11:08
Moved the receiver 2 meters, used another network-cable, another HDMI, moved the coax-cables from the cable-mess and so on, but still the same. :-(
VU+ Ultimo 4K, 19.2, 13, 4.8 E via switch on input/tuner 1. 1W. Inverto Unicable II LNB IDLU-32UL40 on input/tuner 2. OpenPLi 8.3
Re: Freezing channels. #16
-
- Senior Member
- 5,461 posts
+114
Excellent
Posted 13 September 2020 - 12:10
So obviously you suffer from KA-band interference. Only thing is to move either dish out of the way! And I mean WAY out of the way...
Met één been in het graf..... Helaas
Re: Freezing channels. #17
-
- Senior Member
- 423 posts
+1
Neutral
Posted 13 September 2020 - 13:30
It was no problem for 12-13 years with the dish in this location.
VU+ Ultimo 4K, 19.2, 13, 4.8 E via switch on input/tuner 1. 1W. Inverto Unicable II LNB IDLU-32UL40 on input/tuner 2. OpenPLi 8.3
Re: Freezing channels. #18
-
- Senior Member
- 229 posts
+7
Neutral
Posted 13 September 2020 - 13:47
Maybe recent 5G interference ?
test
Re: Freezing channels. #19
-
- Senior Member
- 423 posts
+1
Neutral
Posted 13 September 2020 - 14:37
No 5G here when the problem started.
VU+ Ultimo 4K, 19.2, 13, 4.8 E via switch on input/tuner 1. 1W. Inverto Unicable II LNB IDLU-32UL40 on input/tuner 2. OpenPLi 8.3
Re: Freezing channels. #20
-
- Senior Member
- 5,461 posts
+114
Excellent
Posted 13 September 2020 - 15:22
Frequecies change!! 10 years ago the KA band did not exist!!
Met één been in het graf..... Helaas
0 user(s) are reading this topic
0 members, 0 guests, 0 anonymous users
