Posted 1 June 2020 - 18:14
Hello,
I have a Zgemme H7S running OpenPli 6.2, before OpenPli 4. Fixed IP
I have a Synology NAS on my network and a W10 PC with shared disk.
In my opinion, the NAS should be mounted as CIFS and my PC disk as NFS. Is that correct ??
If I try to change a setting in for the NAS or the disk, once done I click OK to activate the change. That operation take a lot of time : at least 15-20 min., rebooting or not.
I did not find an explanation !
Please help !
Félix
Posted 1 June 2020 - 18:38
No.
If possible use NFS. As Synology offers that, use it (you need to configure it though). Windows doesn't use NFS, so you can only use CIFS.
Currently in use: VU+ Duo 4K (2xFBC S2), VU+ Solo 4K (1xFBC S2), uClan Usytm 4K Pro (S2+T2), Octagon SF8008 (S2+T2), Zgemma H9.2H (S2+T2)
Due to my bad health, I will not be very active at times and may be slow to respond. I will not read the forum or PM on a regular basis.
Many answers to your question can be found in our new and improved wiki.
Posted 1 June 2020 - 18:39
NAS= NFS
PC probably CIFS depend on system your running. Like on windows you have a samba cifs mount.
Mut@nt HD51 STB 4K
Posted 1 June 2020 - 18:41
Have a look at https://wiki.openpli.org/Data_sharing good luck 
Hardware: Vu+ Uno 4K SE - Vu+ Duo 4K - Fuba 78 cm - Tripleblock LNB Quad 19.2/23.5/28.2 - DS918+
Software : OpenPLi - OSCam - Settings van Hans - Autotimer - EPGImport
---------------------------------------------------------------------------------------------------------------------------------------
Remember: Upvote with the 
button for any user/post you find to be helpful, informative, or deserving of recognition!
---------------------------------------------------------------------------------------------------------------------------------------
Many answers to your question can be found in our new and improved wiki
Posted 21 November 2020 - 15:39
Hello
Is there better explanation for https://wiki.openpli.org/Data_sharing? Screen in image does not have same options like on site 
and i can not mount my share. In other image 2-3 clicks enter password and i got mounted my Win10 share. I try for hours and can`t get workign here on VU+ Uno 4k SE, new flashed image. I like this image and like to stay. Can anyone point me to some post or how to make it working? i search but i found only this one.
Thanx
Posted 21 November 2020 - 15:51
Is sharing active on your W10 PC? Is the firewall allowing incoming connections?
Current screen is indeed slightly different, I think the screenshots are from OpenPLi 4. I have:
1_0_2_D75C_82F_2_11A0000_0_0_0_20201121145004.jpg 61.22KB
4 downloads
Don't fill in the "Mount options" field, OpenPLi will autodetect these settings when you activate the mount.
Currently in use: VU+ Duo 4K (2xFBC S2), VU+ Solo 4K (1xFBC S2), uClan Usytm 4K Pro (S2+T2), Octagon SF8008 (S2+T2), Zgemma H9.2H (S2+T2)
Due to my bad health, I will not be very active at times and may be slow to respond. I will not read the forum or PM on a regular basis.
Many answers to your question can be found in our new and improved wiki.
Posted 22 November 2020 - 02:08
Of course it`s shared, other image find PC find Phone find Router and mount it instant, no need to fill anything just fill user and pass and it`s in list. Than i gi in Media player 2 and share it`s there and working.
Problem is that ONLY this image does not find any share on ip`s except VU+ himself and his shares, rest are empty.
I think CIFS share don`t work at all only NFS works.
I got this error when i try to mount from Telnet:
mount: can`t find //192.168.1.2/MyShare in etc/fstab
Edited by Solarfox, 22 November 2020 - 02:13.
Posted 22 November 2020 - 02:20
Edit: I manage to mount with this Command. But it does NOT work as should. # mount -t cifs -o username=user,password=pass //192.168.1.2/MyShare /hdd
Posted 22 November 2020 - 02:25
That is exactly what Enigma does under the hood. I just tried one from my SF8008 to my Duo 4K (I don't have Windows), and it works fine.
If you want to verify or check it and what goes wrong, restart Enigma in debug mode in the menu, and when restarted, restart it again in normal mode (to avoid the log filling the disk).
Then go to the root home directory, where you should find an enigma-{date}.debuglog file, with the executed mount commands in it.
Currently in use: VU+ Duo 4K (2xFBC S2), VU+ Solo 4K (1xFBC S2), uClan Usytm 4K Pro (S2+T2), Octagon SF8008 (S2+T2), Zgemma H9.2H (S2+T2)
Due to my bad health, I will not be very active at times and may be slow to respond. I will not read the forum or PM on a regular basis.
Many answers to your question can be found in our new and improved wiki.
0 members, 1 guests, 0 anonymous users
