Hello, I have tried to flash my OpenPli 7.0RC using method form manual (online flash from MENU) but received following error. Any advice?
Attached Files
-
tuner_n.jpg 179.43KB
1 downloads
Edited by mosskit, 21 June 2020 - 12:01.
OpenPLI 7.0RC flashing to 7.2 failed
Started by mosskit, 21 Jun 2020 12:01
6 replies to this topic
Re: OpenPLI 7.0RC flashing to 7.2 failed #2
-
- PLi® Core member
- 7,185 posts
+323
Excellent
Posted 21 June 2020 - 12:18
Does the box work now? If not, then put an image on a USB stick and flash it normally.
Which box do you have?
Which box do you have?
Xtrend ET-9200, ET-8000, ET-10000, OpenPliPC on Ubuntu 12.04
Re: OpenPLI 7.0RC flashing to 7.2 failed #3
-
- PLi® Contributor
- 1,863 posts
+87
Good
Posted 21 June 2020 - 14:24
This usually happens when the mount of the hard disk or the hard disk itself is not in order.
Simply try using a USB stick at another free USB space via online flash / ofgwrite, then it usually works.
Re: OpenPLI 7.0RC flashing to 7.2 failed #4
-
- Member
- 18 posts
0
Neutral
Posted 21 June 2020 - 17:01
Does the box work now? If not, then put an image on a USB stick and flash it normally.
Which box do you have?
Well I Reboot the box (VU+ Duo 4K) and it started again with 7.0RC. I have USB and HDD connected inside box.
Re: OpenPLI 7.0RC flashing to 7.2 failed #5
-
- Member
- 18 posts
0
Neutral
Posted 21 June 2020 - 17:01
This usually happens when the mount of the hard disk or the hard disk itself is not in order.
Simply try using a USB stick at another free USB space via online flash / ofgwrite, then it usually works.
Would you please describe more this command? Should I do it via terminal (SSH) or what ?
Re: OpenPLI 7.0RC flashing to 7.2 failed #6
-
- PLi® Core member
- 70,862 posts
+1,832
Excellent
Posted 21 June 2020 - 17:43
Download the zip, get a stick, format it in FAT (and nothing else!), unpack the zip onto the stick (as-is), put the stick in the box, restart the box, press the button when prompted.
Currently in use: VU+ Duo 4K (2xFBC S2), VU+ Solo 4K (1xFBC S2), uClan Usytm 4K Ultimate (S2+T2), Octagon SF8008 (S2+T2), Zgemma H9.2H (S2+T2)
Due to my bad health, I will not be very active at times and may be slow to respond. I will not read the forum or PM on a regular basis.
Many answers to your question can be found in our new and improved wiki.
Re: OpenPLI 7.0RC flashing to 7.2 failed #7
-
- PLi® Contributor
- 1,863 posts
+87
Good
Posted 21 June 2020 - 17:49
ofgwirte via USB-Stick
Load a desired image from pli via PC onto the USB stick.
Now connect the USB stick to your box.
Restart your box-> You have now automatically mounted the USB stick as Mount USB.
Now choose the way of Flash
Settings
system
Flash
Here you choose your local image from the USB stick as FlashImage
Edited by rantanplan, 21 June 2020 - 17:50.
1 user(s) are reading this topic
0 members, 1 guests, 0 anonymous users
